Processing and characterization of new oxy-sulfo-telluride glasses in the Ge-Sb-Te-S-O system

New oxy-sulfo-telluride glasses have been prepared in the Ge-Sb-Te-S-O system employing a two-step melting process which involves the processing of a chalcogenide glass (ChG) and subsequent melting with TeO₂ or Sb₂O₃. The progressive incorporation of O at the expense of S was found to increase the density and the glass transition temperature and to decrease the molar volume of the investigated oxy-sulfo-telluride glasses. We also observed a shift of the vis-NIR cut-off wavelength to longer wavelength probably due to changes in Sb coordination within the glass matrix and overall matrix polarizability. Using Raman spectroscopy, correlations have been shown between the formation of Ge- and Sb-based oxysulfide structural units and the S/O ratio. Lastly, two glasses with similar composition (Ge₂₀Sb₆S₆₄Te₃O₇) processed by melting the Ge₂₃Sb₇S₇₀ glass with TeO₂ or the Ge₂₃Sb₂S₇₂Te₄ glass with Sb₂O₃ were found to have slightly different physical, thermal, optical and structural properties. These changes are thought to result mainly from the higher moisture content and sensitivity of the TeO₂ starting materials as compared to that of the Sb₂O₃.     

Effect of dopant structure on refractive index and glass transition temperature of polymeric fiber‐optic materials

Graded‐index plastic optical fibers, composed of doped polymers, have advantages over conventional glass optical fibers, but need to be developed further for practical application. Here, a variety of aromatic sulfide dopants were synthesized, and their effects on the refractive indexes and glass transition temperatures (T_g) of poly(methyl methacrylate) and methyl 2‐chloroacrylate/2,2,2‐trichloroethyl methacrylate copolymers were studied. While polymers containing large dopants exhibited relatively high refractive indices, their T_g values were low, making these materials unsuitable for graded‐index plastic optical fiber applications. Six dopants yielded polymers that exhibited higher T_g values than the conventionally used (diphenyl sulfide)‐doped polymer. The dopant dibenzothiophene, in particular, yielded polymers with the highest refractive indexes and T_g values, and polymers containing (phenylthio)benzene dopants also performed well. Copyright © 2013 John Wiley & Sons, Ltd.     

Control of refractive index of sol-gel tungsten oxide films

Tungsten oxide films were prepared by a complexing agent-assisted sol-gel process. All the films were at 500°C were crystalline and transparent. The refractive index n and extinction coefficient k of the films were calculated from the transmittance and reflectance spectra in the visible and infrared regions. The values of n were lowered to depend on the organic ligands used in the preparation of the sols. The use of such ligands may be a mean to control the refractive index of coatings.     

Synthesis of high‐refractive index polyimide containing selenophene unit

A highly refractive and transparent aromatic polyimide (PI) containing a selenophene unit has been developed. The PI was prepared by a two‐step polycondensation procedure from 2,5‐bis(4‐aminophenylenesulfanyl)selenophene (APSP) and 4,4′‐[p‐thiobis(phenylenesulfanyl)]diphthalic anhydride (3SDEA), and shows high thermal stabilities, such as a relatively high‐glass transition temperature of 189 °C and 5% weight loss temperature (T_5%) of 418 °C. The optical transmittance of the PI film at 450 nm is higher than 50%. The selenophene unit provides the PI with a refractive index of 1.7594, which is higher than corresponding PIs containing a thiophene or a phenyl unit because of the high polarizability per unit volume of the selenium atom. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 4428–4434, 2009     

Light induced gradient refractive index materials

Controlled and patterned variation of refractive index (wavefront) across a lens surface was obtained via the use of “phase mask”. Gradient interpenetrating network was selected to screen the acrylate and epoxy monomer to obtain necessary refractive index change over the lens surface. The best photoinitiator system was determined to give a stable and transparent wavefront as a mixture of 2 wt% Irgacure 250 (I 250), 1 wt% Isopropylthoxanthone (ITX) and 0.5 wt Irgacure 184 (I 184). It is found that a dipropylene glycol diacrylate (SR 508) and a triethylene glycol dimethacrylate (TGDM) improved the stability of the transparent wavefront because of higher Tg of the network. Haze problem, a consequence of diffusion of one monomer to other network because of the rate differences, was eliminated with IPN composed of TGDM (an acrylate with slow polymerization rate) and bis (3,4‐epoxy cyclohexylmethyl)adipate (BECMA, an epoxy with fast polymerization rate). A high refractive index additive, bromonaphthalene, resulted the best wavefront with lens power when incorporated into BECMA and TGDM IPN. Copyright © 2015 John Wiley & Sons, Ltd.     

Evidence of network demixing in GeS2-Ga2S3 chalcogenide glasses: A phase transformation study

The information of phase transformation is attained by in situ XRD experiments leading to the knowledge of topological threshold in GeS₂-Ga₂S₃ glasses. The turning point of phase transformation behavior is demonstrated to be glasses containing 14-15 mol% Ga₂S₃. To interpret it a network demixing model is further improved and proposed for the structure of these ternary or quasi-binary chalcogenide glasses. For the nearest-neighbor coordination environment of glass with a transitional composition of 85.7 mol% (6/7) GeS₂·14.3 mol% (1/7) Ga₂S₃, six-coordinated [S₃Ga-X-GaS₃] units (X=S or None) are well isolated by the [GeS₄] structures, which contributes to the decreasing of precipitation of Ga₂S₃ crystals in (100−x)GeS₂-xGa₂S₃ (x≤14.3) glasses corresponding to the experimental evidence of the phase transformation behavior. This scenario of intermediate-range structural order, firstly, includes the arrangement of structural units which is consistent with and provides an atomistic explanation of the compositional evolution of phase transformation behavior in these glasses.     

Photochemically-induced refractive index and fluoresence patterning on polymer films

The molecular design for large photo-induced refractive index changes in transparent visible light region was proposed and realized with norbornadiene polymers and poly(vinyl cinnamate). The patterning of pure refractive-index contract on their transparent films was made with near-field scanning optical microscopy (NSOM). Reversible fluorescence patterning on polymer films is also presented by using controlled energy transfer from a fluorescent pyromethene to a photochromic diarylethene.     

UV‐induced refractive index modulation of photoreactive polymers bearing N‐acylcarbazole groups

In this study, we report on the synthesis and characterization of photoreactive polymers bearing N‐acetylcarbazole and N‐formylcarbazole groups, respectively. These polymers were easily accessible by polymer analogous acylation of commercially available poly‐(2‐vinylcarbazole). While poly(1‐(2‐vinyl‐9H‐carbazol‐9‐yl)ethanone) (poly‐ 1 ) undergoes a partial photochemical Fries rearrangement, poly(2‐vinyl‐9H‐carbazole‐9‐carbaldehyde) (poly‐ 2 ) decarbonylates smoothly when exposed to UV irradiation. The difference in reactivity between the two acylated polymers is because of the lower stability of the formyl radical, which is formed in the first stage of this photoreaction. Ellipsometric measurements of thin films showed that the photo‐Fries rearrangement in poly‐ 1 causes a change in refractive index by Δn = +0.01 at 650 nm. UV illumination of poly‐ 2 results in a change of the refractive index by Δn = +0.03 at 650 nm, which can be explained by the high yield of the photodecarbonylation of the N‐formylcarbazole groups. Refractive index patterns can be easily realized using lithographic techniques as demonstrated by optical microscopy using a phase contrast set‐up for visualization. Patterned films of poly‐ 1 and poly‐ 2 with feature sizes of about 5 μm were obtained with a mask aligner. Photoreactive polymers bearing N‐acylcarbazole groups are of potential interest for optical applications such as waveguides, optical switches, and data storage devices. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2010     

Crystal structure and Raman scattering characterization of Cu2Fe1-xCoxSnS4 chalcogenide compounds

This work reports the synthesis by solid–state reaction of Cu₂Fe_1-xCo_xSnS₄ solid solutions. Crystal structures of Cu₂Fe_0.8Co_0.2SnS₄ and Cu₂Fe_0.6Co_0.4SnS₄ were investigated by single crystal X-ray diffraction. Both phases crystallize in the tetragonal stannite-type structure. The volume of the tetrahedral [MS₄] (M = Fe, Co) presented the highest distortion, with Edge-Length Distortion (ELD) indices ∼2% from the ideal tetrahedron. The powder X-ray diffraction (XRD) patterns of Cu₂Fe_1-xCo_xSnS₄ (x = 0.2, 0.4, 0.6 and 0.8) has been refined by Rietveld method. No secondary phases were detected in XRD patterns. An analysis of the vibrational properties of Cu₂Fe_1-xCo_xSnS₄ was performed using Raman scattering measurements. The Raman peaks were analyzed by fitting of the spectra and subsequently identifying the vibrational modes by comparison with experimental and theoretical data from Cu₂FeSnS₄ (CFTS) and Cu₂CoSnS₄ (CCTS) end-members. The spectra from Cu₂Fe_1-xCo_xSnS₄ show that there is a variation in the frequency of the main A₁ peak at ∼320 cm⁻¹ together with a decrease in the secondary mode intensity at ∼285 cm⁻¹. Full Width at Half Maximum (FWHM) and the intensity of the Raman peaks reflect the high crystallinity of Cu₂Fe_1-xCo_xSnS₄ solid solutions. The oxidation states of the metals were confirmed by temperature-dependent magnetization measurements performed in the antiferromagnetic Cu₂Fe_1-xCo_xSnS₄ solid solutions.     

Glass transition kinetics of some Se-Te-Ag chalcogenide glasses

Summary The present paper reports the Differential Scanning Calorimetric (DSC) study of some Ag doped Se-Te chalcogenide glasses. DSC runs were taken at different heating rates. Well-defined endothermic and exothermic peaks were obtained at glass transition and crystallization temperatures. The variation of glass transition temperature T_gwith Ag concentration has been studied. It has been found that T_gdecreases with increase in Ag concentration. The heating rate dependence of T_gis used to evaluate the activation energy of glass transition (DE_t). The value of<span style='font-size:10.0pt; font-family:"SymbolProp BT";mso-bidi-font-family:"SymbolProp BT"'>DE_thas been found to increase with increase in Ag concentration followed by nearly constant value at higher concentrations of Ag.     

Kinetics of refractive index changes in polymeric photochromic films

Methacrylate copolymers containing, in side chain azobenzene groupings with heterocyclic sulfonamide substituents: N-(2,6-dimethylpyrimidin-4-yl)sulfamoyl (sulfisomidine) and N-(5-methylisoxazol-3-yl) sulfamoyl (sulfamethoxazole) were investigated. The materials undergo reversible trans-cis isomerisation during illumination with light. This results in changes of dipole moment, polarizability and refractive index. Ellipsometric measurements showed a distinct decreasing refractive index during illumination with light corresponding to absorption band (ca. 450 nm). Depending on the polymer, the change of real part of refractive index in spin-coated films was between 0.016 and 0.031. The dynamics of growth and decay of refractive index changes, was described by biexponential function approach.     

Temperature dependence of the thermophysical properties of polycrystallene chalcogenide glasses

The specific heat (C _p), thermal conductivity (λ), thermal diffusivity (a), and electrical conductivity (σ) were measured for polycrystalline HgS and Sb₂S₃ in the temperature range 300–600 K. The measurements were performed with an experimental apparatus based on a socalled flash method. The results showed that the mechanism of heat transfer is mainly due to phonons, whereas the contribution of electrons and bipolars is very small indeed. The energy gap of the samples was also calculated.     

Light induced refractive index changes in PMMA films doped with styrene

Solutions of poly(methyl methacrylate) in styrene are used to produce thin polymer films (1m–20m) saturated with styrene monomer. In the illuminated areas refractive index changes up to 10^–2 are achieved by photoinduced polymerisation. The index patterns may be fixed by annealing treatments removing the residual monomer.We thank P. Hertel, M. Kopietz, M. D. Lechner and D. Steinmeier for valuable discussions. Financial support of the Stiftung Volkswagenwerk is gratefully acknowledged.     

Polarizability and molecular radius of dimethyl-sulfoxide and dimethylformamide from refractive index data

Densities and refractive indicies of dimethylsulfoxide and dimethylformamide were measured at various temperatures and wave-lengths. Polarizabilities and molecular radii were calculated on the basis of Böttcher's theory of electric polarization and compared with the molecular radii evaluated from the molar volumes of the liquids and from geometrical considerations.     

Modeling of X-ray-induced refractive index changes in poly(methyl methacrylate).

The refractive index of bulk poly(methyl methacrylate) samples is modified by X-ray exposure. The intensity of the radiation is distributed over an energy range of 1 to 20 keV with a maximum at 3 keV. For an absorbed dose of about 1 kJ cm(-3), an increase of the refractive index of up to 3x10(-4) is observed. However, for much lower doses of about 10 J cm(-3) a decrease of 4x10(-4) appears. These refractive index changes, as well as the simultaneously arising radiation-induced thickness changes, are detected interferometrically. Based on these observations, on dose calculations, and on literature data, a model is proposed which describes quantitatively the observed refractive index changes. The refractive index increase is caused by a radiation-induced chemical alteration of the polymer composition, while the refractive index decrease is correlated with a decrease of mass density.     

Alternating copolymerization of bis(hexafluoroisopropyl) fumarate with styrene and vinyl pentafluorobenzoate: Transparent and low refractive index polymers

Bis(hexafluoroisopropyl) fumarate (BHFIPF) did not homopolymerize with free radical initiators. However, BHFIPF yielded alternating copolymers with styrene in bulk with Azobisisobutyronitrile (AIBN) as a radical initiator. The monomer reactivity ratios of BHFIPF (M₁) and styrene (M₂) were calculated as r₁ = 0.00 and r₂ = 0.02. BHFIPF also copolymerized with vinyl pentafluorobenzoate (VPFB) in bulk and in pentafluoroisopropanol solution to produce an alternating copolymer. The reactivity ratios of BHFIPF (M₁) with VPFB (M₂) were r₁ = 0.00 and r₂ = 0.05 in bulk and r₁ = 0.01 and r₂ = 0.11 in pentafluoroisopropanol, respectively. The glass transition temperatures (T_g) of the BHFIPF‐styrene and BHFIPF‐VPFB copolymers were 107 and 86 °C, respectively. The BHFIPF‐styrene copolymer was thermally stable, and the thermal degradation temperature (T_d) was 400 °C, whereas the T_d of BHFIPF‐VPFB copolymer was 240 °C. The films obtained by casting from tetrahydrofuran (THF) solutions of these copolymers were flexible and transparent. Their refractive indices were 1.4048 for the BHFIPF‐styrene copolymer, and 1.3980 for the BHFIPF‐VPFB copolymer at 633 nm, respectively. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

On the complex refractive index of N-doped TiO2 nanospheres and nanowires in the terahertz spectral region

In this paper, the terahertz (THz) transmission measurement technique was applied to characterize titanium dioxide (TiO₂) nanospheres and nanowires subjected to thermal treatments under various conditions. Differences in the spectral features of the nanospheres and nanowires were observed due to treatment and annealing of the samples in different gas atmospheres. The observations made can be explained based on the formation of new phonon bands and/or widening of the phonon bands due to polymorphism. A singly subtractive Kramers Kronig dispersion relation was utilized to estimate the frequency-dependent real refractive index of the various samples, having a priori unknown sample thickness, from the absorbance data.     

Flexible nanocrystalline‐titania/polyimide hybrids with high refractive index and excellent thermal dimensional stability

In this study, a novel synthetic route was developed to prepare polyimide–nanocrystalline–titania hybrid optical films with a relatively high titania content (up to 50 wt %) and thickness (20–30 μm) from soluble polyimides containing hydroxyl groups. Two series of newly soluble polyimides were synthesized from the hydroxy‐substituted diamines with various commercial tetracarboxylic dianhydrides. The hydroxyl groups on the backbone of the polyimides could provide the organic–inorganic bonding and resulted in homogeneous hybrid solutions by controlling the mole ratio of titanium butoxide/hydroxyl group. AFM, SEM, TEM, and XRD results indicated the formation of well‐dispersed nanocrystalline‐titania. The flexible hybrid films could be successfully obtained and revealed relatively good surface planarity, thermal dimensional stability, tunable refractive index, and high optical transparency. A three‐layer antireflection coating based on the hybrid films was prepared and showed a reflectance of less than 0.5% in the visible range indicated its potential optical applications. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 1433–1440, 2010