矩形板耦合热冲击问题的摄动解

本文通过对薄板耦合热弯曲问题的完备方程的无量纲化,引出了关于薄板的无量纲热弹性耦合系数,并以此系数为摄动参数,运用奇异摄动方法,导出了其摄动方程,得到了关于矩形薄板耦合热冲击问题的一致有效的渐近解。然后,在对该解讨论及计算的基础上,获得了一些关于该类问题的规律性的结论。     

热弹性薄板大挠度弯曲的BEM法

本文首先基于理性力学非线性几何场理论，建立了等效速率形式的热弹性薄板的Ｋａｒｍａｎ方程，通过将热弹性薄板大挠度弯曲问题的看成平板弯曲问题与平面大变形问题的耦合，在固定坐标系及拖带坐标系上推导出两组边界积分方程，从而建立起新的分析热性薄板大挠度弯曲问题的边界元。本文的方法较双往分析此问题的边界法在理论上更准确，合理，算例表明本文的方法理论可靠，精度良好。     

用杂交边界点法分析简支薄板的热弯曲问题

该文利用杂交边界点法对简支薄板的热弹性弯曲进行了分析计算.采用薄板的热弹性理论,通过薄板的修正变分原理建立了各向同性薄板的边界局部积分方程,域内变量使用基本解插值,而边界上的变量则用移动最小二乘法近似.计算时仅需边界上离散点的信息,无论变量近似还是数值积分都不需要网格,因此该方法是一种纯边界类型无网格方法.数值算例表明,杂交边界点法在分析薄板的热弯曲问题时具有效率高、精度高和收敛性好等优点.     

采用包络-准则法优化考虑瞬态传热的薄板结构

刚度和强度是薄板结构的两个主要性能。在瞬态传热过程中,考虑热-力耦合,随时间和空间变化的非均匀温度场在结构中会引起热变形和热应力,温度场随时间变化的规律和空间分布依赖于板的厚度变化,进而影响板的刚度和强度。因此,考虑瞬态传热的薄板优化问题具有更强的非线性,更加难以求解。本文给出一种包络-准则方法处理这类结构优化问题。首先,针对外力荷载,进行一个结构柔顺性的优化设计;以这一设计为基础,通过瞬态热-力耦合分析及优化准则,计算多个时刻的优化设计变量并取其包络,对上述优化结果进行迭代修正,以消除瞬态温度场作用下较高的局部应力。优化算例表明,该方法对于考虑瞬态传热薄板优化问题有效。     

初曲矩形薄板的非线性动力屈曲研究

对两参数冲击载荷面内压缩作用下初曲矩形薄板的非线性动力屈曲问题进行了理论研究。首先采用双重余弦函数的组合确定了面内冲击矩形薄板的艾雷应力函数和中面力的分布；其次根据伽辽金法求得了初曲矩形薄板非线性动力屈曲问题的控制方程，基于巴拿赫压缩映象原理，采用逐次逼近方法求解了该控制方程。最后，应用本文发展的理论，给出了面内两参数冲击载荷作用下初曲矩形薄板动力屈曲响应的计算实例，计算结果与已有的实验结果较吻合     

圆薄板材料性能随温度变化的大挠度弯曲分析

记入材料性能参数随温度的变化，导出了横向力作用下圆薄板轴对称大挠度弯曲的位移型控 制方程，并利用伽辽金方法求出了圆薄板大挠度弯曲的近似位移解；针对一个简例进行了理 论计算和有限元数值模拟，二者结果一致. 在此基础上分析了圆薄板大挠度弯曲的规律及材 料参数随温度变化的热软化效应，给出了相关结果.     

Winkler地基上各向异性薄板弯曲的精确解-广义积分变换解

外界载荷作用下复合材料薄板的弯曲行为是工程重点关注的问题之一。针对各向同性和正交各向异性的薄板弯曲问题,研究人员已给出了经典数值解。由于计算的复杂性,针对各向异性薄板弯曲问题的解答较少。本文从薄板弯曲问题的控制方程出发,建立符合该问题的辅助特征方程,并确定相应的特征值和特征函数。利用广义积分变换的思想,建立了求解非正交铺层条件下各向异性薄板弯曲问题的数值算法,给出了各向异性薄板弯曲的精确解。与其他文献结果比较发现,该方法具有较好的收敛性和准确性。     

正多边形弹性薄板的弯曲解

提出了一种在极坐标下求解正多边形薄板弯曲的新方法。在均布荷载条件下,通过选取满足特定对称条件的试函数,得到正多边形弹性薄板弯曲问题的级数展开解法,在挠度或弯矩表达式中仅取前5项,就可获得较高精度的结果,该方法能较好地解决特定正多边形薄板的弯曲问题,既可适用于求解均布荷载下的任意正多边界薄板的弯曲问题,也可以推广到承受任意荷载的任意正多边形薄板。     

弹性圆板的热过屈曲

基于精确的圆薄板轴对称大挠度变形几何方程，建立了均匀加热圆板轴对称热弹性屈曲问题位移形式的控制方程，采用打靶法和解析延拓法获得了连续依赖于温度载荷的圆板过屈曲状态解，给出了相应的数值结果。     

热载荷下粘弹性功能梯度材料薄板的准静态响应

由热粘弹性功能梯度材料的本构方程出发,利用Laplace变换,通过引进薄板的“结构函数”和“热函数”,建立了各向同性薄板的数学模型．采用卷积双线性形式,给出了薄板准静态问题的简化Gunin型泛函．在空域上和时域上分别采用Ritz法和kgerdre插值法考察了温度变化和功能梯度对于薄板响应的影响。     

Analytical bending solutions of free orthotropic rectangular thin plates under arbitrary loading

This paper presents the analytical solutions for the bending of orthotropic rectangular thin plates by the double finite integral transform, which, as an effective tool in solving plate problems, should have received attention. As a representative and difficult problem in the theory of plates, free plates’ bending is successfully solved to demonstrate the accuracy of the method by comparing the present analytical solutions with those from the literature as well as those by the finite element method. With the proper integral transform kernels, the proposed solution procedure is applicable to the bending of orthotropic rectangular plates with all combinations of simply supported, clamped and free boundary conditions, which serves as an elegant approach to analytical solutions of plate bending problems.     

功能梯度材料板件三维分析的半解析梯度有限元法

将半解析有限元与梯度有限元相结合,形成一种半解析梯度有限元来求解功能梯度材料板件问题。该方法兼有有限元法的适应性强、程序统一,半解析有限元法的节省单元与计算工作量,梯度有限元法的适应构件内部材料性能任意梯度分布等特点,并实现用一维数值计算给出构件三维分析结果。算例分析表明了方法的精度、功能与上述特点,充分揭示了功能梯度材料板件力学响应的三维形态。半解析梯度有限元法可推广应用到其他功能梯度材料面结构的各类分析中。     

Application of the strain energy density criterion to ductile fracture

The strain energy density criterion due to Sih is used to predict fracture loads of two thin plates subjected to large elastic-plastic deformation. The prediction is achieved with a finite element analysis which is based on Hill's variational principle for incremental deformations capable of solving gross yielding problems involving arbitrary amounts of deformation. The computed results are in excellent agreement with those obtained in Sih's earlier analysis and with an experimental observation.     

面内变刚度薄板弯曲问题的挠度?弯矩耦合神经网络方法

发展了一种求解面内变刚度功能梯度薄板弯曲问题的神经网络方法. 面内变刚度薄板弯曲问题的偏微分控制方程为一复杂的4阶偏微分方程, 传统的基于强形式的神经网络解法在求解该偏微分方程时可能会遇到难以收敛、边界条件难以处理的情况. 本文基于Kirchhoff薄板弯曲理论, 提出了一种直角坐标系下任意面内变刚度薄板弯曲问题的神经网络解法. 神经网络模型包含挠度网络与弯矩网络, 分别用于预测薄板的挠度与弯矩, 从而将求解4阶偏微分方程转换为求解一系列二阶偏微分方程组, 通过对挠度、弯矩试函数的构造可使得神经网络计算结果严格满足边界条件. 在误差的反向传播中, 根据本文提出的误差函数公式计算训练误差并结合Adam优化算法更新模型的内部参数. 求解了不同边界条件、形状的面内变刚度薄板弯曲问题, 并将所得计算结果与理论解、有限元解进行对比. 研究表明, 本文模型对于求解面内变刚度薄板弯曲问题具备适应性, 虽然模型中的弯矩网络收敛较挠度网络要慢, 但本文方法在试函数的构造上更为简单、适应性更强.      

Exact bending solutions of orthotropic rectangular cantilever thin plates subjected to arbitrary loads

Exact bending solutions of orthotropic rectangular cantilever thin plates subjected to arbitrary loads are derived by using a novel double finite integral transform method. Since only the basic elasticity equations for orthotropic thin plates are used, the method presented in this paper eliminates the need to predetermine the deformation function and is hence completely rational thus more accurate than conventional semi-inverse methods, which presents a breakthrough in solving plate bending problems as they have long been bottlenecks in the history of elasticity. Numerical results are presented to demonstrate the validity and accuracy of the approach as compared with those previously reported in the literature     

A Finite Element Analysis of a Viscoplastic Plate Subjected to Rapid Heating

Abstract

This paper models the response of a thin metallic plate that is subjected to a rapid heat input. In order to accurately model plate response, both the dynamic mechanical and transient heat transfer problems must be solved. The solution is complicated by nonlinearities due to radiation boundary conditions and material inelasticity. Furthermore, the viscoplastic constitutive equations that model the mechanical material behavior are numerically stiff. Nonlinear finite element algorithms are developed for both heat transfer and mechanical analyses. The algorithms are both stable and efficient for solving the problems considered herein. Example problems presented in the paper demonstrate the importance of including material nonlinearity in the model     

近场动力学与有限元方法耦合求解热传导问题

求解含裂纹等不连续问题一直是计算力学的重点研究课题之一,以偏微分方程为基础的连续介质力学方法处理不连续问题时面临很大的困难. 近场动力学方法是一种基于积分方程的非局部理论,在处理不连续问题时有很大的优越性. 本文提出了求解含裂纹热传导问题的一种新的近场动力学与有限元法的耦合方法. 结合近场动力学方法处理不连续问题的优势以及有限元方法计算效率高的优势,将求解区域划分为两个区域,近场动力学区域和有限元区域. 包含裂纹的区域采用近场动力学方法建模,其他区域采用有限元方法建模. 本文提出的耦合方案实施简单方便,近场动力学区域与有限元区域之间不需要设置重叠区域. 耦合方法通过近场动力学粒子与其域内所有粒子(包括近场动力学粒子和有限元节点)以非局部方式连接,有限元节点与其周围的所有粒子以有限元方式相互作用. 将有限元热传导矩阵和近场动力学粒子相互作用矩阵写入同一整体热传导矩阵中,并采用Guyan缩聚法进一步减小计算量. 分别采用连续介质力学方法和近场动力学方法对一维以及二维温度场算例进行模拟,结果表明,本文的耦合方法具有较高的计算精度和计算效率. 该耦合方案可以进一步拓展到热力耦合条件下含裂纹材料和结构的裂纹扩展问题.      

Streamline upwind finite element method for conjugate heat transfer problems

This paper presents a combined finite element method for solving conjugate heat transfer problems where heat conduction in a solid is coupled with heat convection in viscous fluid flow. The streamline upwind finite element method is used for the analysis of thermal viscous flow in the fluid region, whereas the analysis of heat conduction in solid region is performed by the Galerkin method. The method uses the three-node triangular element with equal-order interpolation functions for all the variables of the velocity components, the pressure and the temperature. The main advantage of the proposed method is to consistently couple heat transfer along the fluid-solid interface. Three test cases, i.e. conjugate Couette flow problem in parallel plate channel, counter-flow in heat exchanger, and conjugate natural convection in a square cavity with a conducting wall, are selected to evaluate the efficiency of the present method. The English text was polished byYunming Chen.     

Closed-form solutions for free vibration of rectangular FGM thin plates resting on elastic foundation

This article presents closed-form solutions for the frequency analysis of rectangular functionally graded material(FGM) thin plates subjected to initially in-plane loads and with an elastic foundation. Based on classical thin plate theory, the governing differential equations are derived using Hamilton's principle. A neutral surface is used to eliminate stretching–bending coupling in FGM plates on the basis of the assumption of constant Poisson's ratio. The resulting governing equation of FGM thin plates has the same form as homogeneous thin plates. The separation-ofvariables method is adopted to obtain solutions for the free vibration problems of rectangular FGM thin plates with separable boundary conditions, including, for example, clamped plates. The obtained normal modes and frequencies are in elegant closed forms, and present formulations and solutions are validated by comparing present results with those in the literature and finite element method results obtained by the authors. A parameter study reveals the effects of the power law index n and aspect ratio a/b on frequencies.     

Finite element analysis of post-buckling dynamics in plates—Part I: An asymptotic approach

Various static and dynamic aspects of post-buckled thin plates, including the transition of buckled patterns, post-buckling dynamics, secondary bifurcation, and dynamic snapping (mode jumping phenomenon), are investigated systematically using asymptotical and non-stationary finite element methods. In part I, the secondary dynamic instability and the local post-secondary buckling behavior of thin rectangular plates under generalized (mechanical and thermal) loading is investigated using an asymptotic numerical method which combines Koiter’s nonlinear instability theory with the finite element technique. A dynamic multi-mode reduction method—similar to its static single-mode counterpart: Liapunov–Schmidt reduction—is developed in this perturbation approach. Post-secondary buckling equilibrium branches are obtained by solving the reduced low-dimensional parametric equations and their stability properties are determined directly by checking the eigenvalues of the resulting Jacobian matrix. Typical post-secondary buckling forms—transcritical, supercritical and subcritical bifurcations are observed according to different combinations of boundary conditions and load types. Geometric imperfection analysis shows that not only the secondary bifurcation load but also changes in the fundamental post-secondary buckling behavior are affected. The post-buckling dynamics and the global analysis of mode jumping of the plates are addressed in part II.