CFD studies on natural convection heat transfer of Al<Subscript>2</Subscript>O<Subscript>3</Subscript>-water nanofluids

This work is focused on numerical simulations of natural convection heat transfer in Al₂O₃-water nanofluids using computational fluid dynamics approach. Fluent v6.3 is used to simulate water based nanofluid considering it as a single phase. Thermo-physical properties of the nanofluids are considered in terms of volume fraction and size of nanoparticles, size of base fluid molecule and temperature. The numerical values of effective thermal conductivity have also been compared with the experimental values available in the literature. The numerical result simulated shows decrease in heat transfer with increase in particle volume fraction. Computed result shows similar trend in increase of Nusselt number with Relayigh number as depicted by experimental results. Streamlines and temperature profiles are plotted to demonstrate the effect.     

Lattice Boltzmann simulation of heat transfer and fluid flow in a microchannel with nanofluids

Mathematical modeling is performed to simulate forced convection flow of 47 nm- Al₂O₃/water nanofluids in a microchannel using the lattice Boltzmann method (LBM). Single channel flow and conjugate heat transfer problem are taken into consideration and the heat transfer rate using a nanofluid is examined. Simulations are conducted at low Reynolds numbers (2 ≤ Re ≤ 16). The computed average Nusselt number, which is associated with the thermal conductivity of nanofluid, is in the range of 0.6 ￡ [`(Nu)] ￡ 13 0.6 \le \overline{Nu} \le 13 . Results indicate that the average Nusselt number increases with the increase of Reynolds number and particle volume concentration. The fluid temperature distribution is more uniform with the use of nanofluid than that of pure water. Furthermore, great deviations of computed Nusselt numbers using different models associated with the physical properties of a nanofluid are revealed. The results of LBM agree well with the classical CFD method for predictions of flow and heat transfer in a single channel and a microchannel heat sink concerning the conjugate heat transfer problem, and consequently LBM is robust and promising for practical applications.     

Non-isobaric Marangoni boundary layer flow for Cu,Al<Subscript>2</Subscript>O<Subscript>3</Subscript> and TiO<Subscript>2</Subscript> nanoparticles in a water based fluid

In this paper, a non-isobaric Marangoni boundary layer flow that can be formed along the interface of immiscible nanofluids in surface driven flows due to an imposed temperature gradient, is considered. The solution is determined using a similarity solution for both the momentum and energy equations and assuming developing boundary layer flow along the interface of the immiscible nanofluids. The resulting system of nonlinear ordinary differential equations is solved numerically using the shooting method along with the Runge-Kutta-Fehlberg method. Numerical results are obtained for the interface velocity, the surface temperature gradient as well as the velocity and temperature profiles for some values of the governing parameters, namely the nanoparticle volume fraction φ (0≤φ≤0.2) and the constant exponent β. Three different types of nanoparticles, namely Cu, Al₂O₃ and TiO₂ are considered by using water-based fluid with Prandtl number Pr =6.2. It was found that nanoparticles with low thermal conductivity, TiO₂, have better enhancement on heat transfer compared to Al₂O₃ and Cu. The results also indicate that dual solutions exist when β<0.5. The paper complements also the work by Golia and Viviani (Meccanica 21:200–204, 1986) concerning the dual solutions in the case of adverse pressure gradient.     

Convection in a Lid-Driven Heat-Generating Porous Cavity with Alternative Thermal Boundary Conditions

Mixed convection flow in a two-sided lid-driven cavity filled with heat-generating porous medium is numerically investigated. The top and bottom walls are moving in opposite directions at different temperatures, while the side vertical walls are considered adiabatic. The governing equations are solved using the finite-volume method with the SIMPLE algorithm. The numerical procedure adopted in this study yields a consistent performance over a wide range of parameters that were 10⁻⁴ ≤ Da ≤ 10⁻¹ and 0 ≤ Ra _I ≤ 10⁴. The effects of the parameters involved on the heat transfer characteristics are studied in detail. It is found that the variation of the average Nusselt number is non-linear for increasing values of the Darcy number with uniform or non-uniform heating condition.     

Investigation of the different base fluid effects on the nanofluids heat transfer and pressure drop

A numerical study of laminar forced convective flows of three different nanofluids through a horizontal circular tube with a constant heat flux condition has been performed. The effect of Al₂O₃ volume concentration 0 ≤ φ ≤ 0.09 in the pure water, water-ethylene glycol mixture and pure ethylene glycol as base fluids, and Reynolds number of 100 ≤ Re ≤ 2,000 for different power inputs in the range of 10 ≤ Q(W) ≤ 400 have been investigated. In this study, all of the nanofluid properties are temperature and nanoparticle volume concentration dependent. The governing equations have been solved using finite volume approach with the SIMPLER algorithm. The results indicate an increase in the averaged heat transfer coefficient with increasing the mass of ethylene glycol in the water base fluid, solid concentration and Reynolds number. From the investigations it can be inferred that, the pressure drop and pumping power in the nanofluids at low solid volumetric concentration (φ < 3%) is approximately the same as in the pure base fluid in the various Reynolds numbers, but the higher solid nanoparticle volume concentration causes a penalty drop in the pressure. Moreover, this study shows it is possible to achieve a higher heat transfer rate with lower wall shear stress with the use of proper nanofluids.     

Effect of Al<Subscript>2</Subscript>O<Subscript>3</Subscript> phases on the enhancement of thermal conductivity and viscosity of nanofluids in engine oil

Thermal conductivity of α-Al₂O₃ was measured using hot wire method. α-Al₂O₃ (20 nm in size) was synthesized by microwave method for which, the results were compared with commercially available γ-Al₂O₃. Thermal conductivity of nanofluids was investigated considering, it is dependency on Al₂O₃ phase. It was observed that by adding 3 wt% of nano γ-Al₂O₃ and α-Al₂O₃ to the engine oil, thermal conductivity increases by 37 and 31%, respectively. The corresponding viscosity increase for the same amount of nano γ-Al₂O₃ and α-Al₂O₃ were 36 and 38%, respectively. It was concluded that the differences in thermal conductivity originate from higher specific surface area of γ-Al₂O₃ compared to the α-Al₂O₃ which is the result of porosity difference, obtained during the synthesis process.     

Non-Darcy buoyancy driven flows in a fluid saturated porous medium: the use of asymptotic computational fluid dynamics (ACFD) approach

Natural convection in a fluid saturated porous medium has been numerically investigated using a generalized non-Darcy approach. The governing equations are solved by using Finite Volume approach. First order upwind scheme is employed for convective formulation and SIMPLE algorithm for pressure velocity coupling. Numerical results are presented to study the influence of parameters such as Rayleigh number (10⁶ ≤Ra ≤10⁸), Darcy number (10⁻⁵ ≤ Da ≤ 10⁻²), porosity (0.4 ≤ ɛ ≤ 0.9) and Prandtl number (0.01 ≤ Pr ≤ 10) on the flow behavior and heat transfer. By combining the method of matched asymptotic expansions with computational fluid dynamics (CFD), so called asymptotic computational fluid dynamics (ACFD) technique has been employed to generate correlation for average Nusselt number. The technique is found to be an attractive option for generating correlation and also in the analysis of natural convection in porous medium over a fairly wide range of parameters with fewer simulations for numerical solutions.     

Combined Laminar Mixed Convection and Surface Radiation using Asymptotic Computational Fluid Dynamics (ACFD)

This paper reports the use of the technique of combining asymptotics with computational fluid dynamics (CFD), known as asymptotic computational fluid dynamics (ACFD), to handle the problem of combined laminar mixed convection and surface radiation from a two dimensional, differentially heated lid driven cavity. The fluid under consideration is air, which is radiatively transparent, and all the walls are assumed to be gray and diffuse and having the same hemispherical, total emissivity (ɛ). The computations have been performed on FLUENT 6.2. The full radiation problem (i.e. all the walls are radiatively black corresponding to ɛ = 1) is first taken up and the method of “perturbing and blending” is used wherein, first, limiting solutions of natural and forced convection are perturbed, to obtain correlations for the weighted average convective Nusselt numbers for the full radiation case. These correlations are then blended suitably in order to obtain a composite correlation for the weighted average convective Nusselt number that is valid for the entire mixed convection range, i.e., 0 ≤ Ri ≤ ∞. This correlation is then expanded in terms of ɛ to obtain an expression for the average convective Nusselt number that is valid for any ɛ in the range 0 ≤ ɛ ≤ 1. In so far as radiation heat transfer is concerned, using asymptotic arguments, a new weighted average radiation Nusselt number is defined such that this quantity can be expanded just in terms of ɛ. Hence, by the use of ACFD, the number of solutions required to obtain reasonably accurate correlations for both the convective and radiative heat transfer rates and hence the total heat transfer rate (Nu _total = Nu _C + Nu _R), is substantially reduced. More importantly, the correlations for convection and radiation are asymptotically correct at their ends. The effect of secondary variables like aspect ratio and the case of unequal wall emissivities can also be included without significant additional effort.     

Experimental studies on heat transfer and friction factor characteristics of Al2O3/water nanofluid in a circular pipe under laminar flow with wire coil inserts

In this paper, fully developed laminar flow convective heat transfer and friction factor characteristics of Al₂O₃/water nanofluid flowing through a uniformly heated horizontal tube with and without wire coil inserts is presented. For this purpose, Al₂O₃ nanoparticles of 43 nm size were synthesized, characterized and dispersed in distilled water to form stable suspension containing 0.1% volume concentration of nanoparticles. The Nusselt number in the fully developed region were measured and found to increase by 12.24% at Re = 2275 for plain tube with nanofluid compared to distilled water. Two wire coil inserts made of stainless steel with pitch ratios 2 and 3 were used which increased the Nusselt numbers by 15.91% and 21.53% respectively at Re = 2275 with nanofluid compared to distilled water. The better heat transfer performance of nanofluid with wire coil insert is attributed to the effects of dispersion or back-mixing which flattens the temperature distribution and make the temperature gradient between the fluid and wall steeper. The measured pressure loss with the use of nanofluids is almost equal to that of the distilled water. The empirical correlations developed for Nusselt number and friction factor in terms of Reynolds/Peclet number, pitch ratio and volume concentration fits with the experimental data within ±15%.     

Production of nanomaterials by vaporizing ceramic targets irradiated by a moderate-power continuous-wave CO<Subscript>2</Subscript> laser

The efficiency of utilization of CO ₂ laser energy for vaporization of Al ₂ O ₃ ceramics is evaluated using a mathematical model for the interaction of laser radiation with materials. It is shown that the calculated efficiency of radiation-energy utilization is not higher than 15% at a radiation power density of 10⁵ W/cm ² on the target. On the experimental facility designed for the synthesis of nanopowders, a vaporization rate of 1 g/h was achieved for Al ₂ O ₃, which corresponds to a 3% efficiency of radiation-energy utilization. The dependence of the characteristic particle size of a zirconium oxide nanopowder on helium pressure in the range of 0.01–1.00 atm was studied. Results of experiments on vaporization of multicomponent materials (LaNiO ₃ and the Tsarev meteorite) are given. __________ Translated from Prikladnaya Mekhanika i Tekhnicheskaya Fizika, Vol. 48, No. 2, pp. 172–184, March–April, 2007.     

Numerical study of conjugate heat transfer in rectangular microchannel heat sink with Al<Subscript>2</Subscript>O<Subscript>3</Subscript>/H<Subscript>2</Subscript>O nanofluid

In the present paper, conjugate heat transfer approach has been used to numerically study laminar forced convective heat transfer characteristics of Al₂O₃/H₂O nanofluid flowing in a silicon microchannel heat sink (MCHS) of rectangular cross-section using thermal dispersion model. Results are presented in terms of thermal resistance that characterizes MCHS performance. It is observed that use of nanofluid improves MCHS performance by reducing fin (conductive) thermal resistance.     

Analytical and numerical study of buoyancy-driven convection in a vertical enclosure filled with nanofluids

This paper presents an analytical and numerical study of natural convection of nanofluids contained in a rectangular enclosure subject to uniform heat flux along the vertical sides. Governing parameters of the problem under study are the thermal Rayleigh number Ra, the Prandtl number Pr, the aspect ratio of the cavity A and the solid volume fraction of nanoparticles, Φ. Three types of nanoparticles are taken into consideration: Cu, Al₂O₃ and TiO₂. Various models are used for calculating the effective viscosity and thermal conductivity of nanofluids. In the first part of the analytical study, a scale analysis is made for the boundary layer regime situation. In the second part, an analytical solution based on the parallel flow approximation is reported for tall enclosures (A ≫ 1). In the boundary layer regime a good agreement is obtained between the predictions of the scale analysis and those of the analytical solution. Solutions for the flow fields, temperature distributions and Nusselt numbers are obtained explicitly in terms of the governing parameters of the problem. A numerical study of the same phenomenon, obtained by solving the complete system of the governing equations, is also conducted. A good agreement is found between the analytical predictions and the numerical simulations.     

Two phase mixed convection Al2O3–water nanofluid flow in an annulus

Heat transfer enhancement of a mixed convection laminar Al₂O₃–water nanofluid flow in an annulus with constant heat flux boundary condition has been studied employing two phase mixture model and effective expressions of nanofluid properties. The fluid flow properties are assumed constant except for the density in the body force, which varies linearly with the temperature (Boussinesq’s hypothesis), thus the fluid flow characteristics are affected by the buoyancy force. The Brownian motions of nanoparticles have been considered to determine the effective thermal conductivity and the effective dynamic viscosity of Al₂O₃–water nanofluid, which depend on temperature. Three-dimensional Navier–Stokes, energy and volume fraction equations have been discretized using the finite volume method while the SIMPELC algorithm has been introduced to couple the velocity–pressure. Numerical simulations have been presented for the nanoparticles volume fraction (?) between 0 and 0.05 and different values of the Grashof and Reynolds numbers. The calculated results show that at a given Re and Gr, increasing nanoparticles volume fraction increases the Nusselt number at the inner and outer walls while it does not have any significant effect on the friction factor. Both the Nusselt number and the friction coefficient at the inner wall are more than their corresponding values at the outer wall.     

Experimental investigations and theoretical determination of thermal conductivity and viscosity of Al2O3/water nanofluid

Experimental investigations and theoretical determination of effective thermal conductivity and viscosity of Al₂O₃/H₂O nanofluid are reported in this paper. The nanofluid was prepared by synthesizing Al₂O₃ nanoparticles using microwave assisted chemical precipitation method, and then dispersing them in distilled water using a sonicator. Al₂O₃/water nanofluid with a nominal diameter of 43 nm at different volume concentrations (0.33–5%) at room temperature were used for the investigation. The thermal conductivity and viscosity of nanofluids are measured and it is found that the viscosity increase is substantially higher than the increase in thermal conductivity. Both the thermal conductivity and viscosity of nanofluids increase with the nanoparticle volume concentration. Theoretical models are developed to predict thermal conductivity and viscosity of nanofluids without resorting to the well established Maxwell and Einstein models, respectively. The proposed models show reasonably good agreement with our experimental results.     

Experimental study of ethylene glycol-based Al2O3 nanofluid turbulent heat transfer enhancement in the corrugated tube with twisted tapes

In this study, fluid flow of the Al₂O₃/ethylene glycol (EG) nanofluid in a corrugated tube fitted with twisted tapes were experimentally studied under turbulent flow conditions. The experiments with different twists ratio and different nanofluid concentration were performed under similar operation condition. The investigated ranges are (1) three different Al₂O₃ concentrations: 0.5, 1 and 1.5 % by volume (2) three different twist ratios of twisted tape: y/w = 2, 3.6 and 5 and (3) Reynolds number from 6000 to 30,000. Regarding the experimental data, utilization of twists together with nanofluids tends to increase heat transfer and friction factor as compared with the base fluid. In addition, heat transfer performances were weakened by using for high nanoparticle concentration. The thermal performances of the heat exchanger with nanofluid and twisted tapes were evaluated for the assessment of overall improvement in thermal behavior. Over the range studied, the maximum thermal performance factor 4.2 is found with the use of Al₂O₃/EG nanofluid at concentration of 0.5 % by volume in corrugated tube together with twisted tape at twist ratio of 2.     

Interaction of turbulent natural convection and surface thermal radiation in inclined square enclosures

Two-dimensional numerical studies of flow and temperature fields for turbulent natural convection and surface radiation in inclined differentially heated enclosures are performed. Investigations are carried out over a wide range of Rayleigh numbers from 10⁸ to 10¹², with the angle of inclination varying between 0° and 90°. Turbulence is modeled with a novel variant of the k–ε closure model. The predicted results are validated against experimental and numerical results reported in literature. The effect of the inclination of the enclosure on pure turbulent natural convection and the latter’s interaction with surface radiation are brought out. Profiles of turbulent kinetic energy and effective viscosity are studied to observe the net effect on the intensity of turbulence caused by the interaction of natural convection and surface radiation. The variations of local Nusselt number and average Nusselt number are presented for various inclination angles. Marked change in the convective Nusselt number is found with the orientation of enclosure. Also analyzed is the influence of change in emissivity on the flow and heat transfer. A correlation relevant to practical applications in the form of average Nusselt number, as a function of Rayleigh number, Ra, radiation convection parameter, N _RC and inclination angle of the enclosure, φ is proposed.     

Effects of inclination angle on natural convection in enclosures filled with Cu–water nanofluid

Effects of inclination angle on natural convection heat transfer and fluid flow in a two-dimensional enclosure filled with Cu-nanofluid has been analyzed numerically. The performance of nanofluids is tested inside an enclosure by taking into account the solid particle dispersion. The angle of inclination is used as a control parameter for flow and heat transfer. It was varied from  = 0° to  = 120°. The governing equations are solved with finite-volume technique for the range of Rayleigh numbers as 10³  Ra  10⁵. It is found that the effect of nanoparticles concentration on Nusselt number is more pronounced at low volume fraction than at high volume fraction. Inclination angle can be a control parameter for nanofluid filled enclosure. Percentage of heat transfer enhancement using nanoparticles decreases for higher Rayleigh numbers.     

Electrorheological response of SnO<Subscript>2</Subscript> and Y<Subscript>2</Subscript>O<Subscript>3</Subscript> nanoparticles in silicon oil

The electrorheological properties (ER) of some fluids containing particles change extensively under the external electrical field. This phenomenon is applicable in many industries and equipments, such as clutches and motor driven rotor, which would transfer the spin to a drive shaft through a thin layer of electrorheological fluid. In this investigation, the effects of external electrical field on ER properties of non-Newtonian fluids (silicon oil) with the addition of SnO₂ and Y₂O₃ nanoparticles were studied. The ER properties were measured for a wide range of SnO₂ and Y₂O₃ nanoparticle concentrations and DC electrical voltages using concentric cylinder rotary rheometer. Based on the results, ER properties of nanofluids, e.g., apparent viscosity, shear stress, and yield stress, were enhanced by applying electrical field and increasing SnO₂ and Y₂O₃ concentrations.

Effects of variable viscosity and thermal conductivity of Al2O3–water nanofluid on heat transfer enhancement in natural convection

Heat transfer enhancement in horizontal annuli using variable properties of Al₂O₃–water nanofluid is investigated. Different viscosity and thermal conductivity models are used to evaluate heat transfer enhancement in the annulus. The base case uses the Chon et al. expression for conductivity and the Nguyen et al. experimental data for viscosity which take into account the dependence of these properties on temperature and nanoparticle volume fraction. It was observed that for Ra  10⁴, the average Nusselt number was reduced by increasing the volume fraction of nanoparticles. However, for Ra = 10³, the average Nusselt number increased by increasing the volume fraction of nanoparticles. For Ra  10⁴, the Nusselt number was deteriorated every where around the cylinder surface especially at high expansion ratio. However, this reduction is only restricted to certain regions around the cylinder surface at Ra = 10³. For Ra  10⁴, the difference in Nusselt number between the Maxwell Garnett and Chon et al. model prediction is small. But, there was a deviation in prediction at Ra = 10³ and this deviation becomes more significant at high volume fraction of nanoparticles. The Nguyen et al. data and Brinkman model gives completely different predictions for Ra  10⁴ where the difference in prediction of Nusselt number reached 30%. However, this difference was less than 10% at Ra = 10³.     

Mixed Convection Boundary Layer Flow from a Horizontal Circular Cylinder Embedded in a Porous Medium Filled with a Nanofluid

Steady mixed convection boundary layer flow from an isothermal horizontal circular cylinder embedded in a porous medium filled with a nanofluid has been studied for both cases of a heated and cooled cylinder. The resulting system of nonlinear partial differential equations is solved numerically using an implicit finite-difference scheme. The solutions for the flow and heat transfer characteristics are evaluated numerically for various values of the governing parameters, namely the nanoparticle volume fraction φ and the mixed convection parameter λ. Three different types of nanoparticles are considered, namely Cu, Al₂O₃ and TiO₂. It is found that for each particular nanoparticle, as the nanoparticle volume fraction φ increases, the magnitude of the skin friction coefficient decreases, and this leads to an increase in the value of the mixed convection parameter λ which first produces no separation. On the other hand, it is also found that of all the three types of nanoparticles considered, for any fixed values of φ and λ, the nanoparticle Cu gives the largest values of the skin friction coefficient followed by TiO₂ and Al₂O₃. Finally, it is worth mentioning that heating the cylinder (λ > 0) delays separation of the boundary layer and if the cylinder is hot enough (large values of λ > 0), then it is suppressed completely. On the other hand, cooling the cylinder (λ < 0) brings the boundary layer separation point nearer to the lower stagnation point and for a sufficiently cold cylinder (large values of λ < 0) there will not be a boundary layer on the cylinder.