Simultaneous Determination of Tramadol and Ibuprofen in Pharmaceutical Preparations by First Order Derivative Spectrophotometric and LC Methods

The simultaneous determination of tramadol (Trama) and ibuprofen (Ibu) in solid dosage forms were done by two methods. The first involved determination using the first order derivative spectrophotometric technique at 230.5 and 280 nm over the concentration ranges of 5–50 and 5–100 μg mL^?1 with mean accuracies 99.84 and 99.98%, respectively. The second method was reversed-phase liquid chromatography using chlorzoxazone (Cxz) as an internal standard. Analysis was carried out using acetonirile—0.1% acetic acid (60 + 40, v/v) as the mobile phase with detection at 272 nm for Trama, Cxz and at 230 nm for Ibu with flow rates of 1 mL min^?1 and 1.3 mL min^?1, respectively. The retention times for Trama, Cxz and Ibu were 2.14, 4.10 and 9.04, respectivly. The mean recovery of Trama and Ibu was 99.91 and 99.92%. Due to its simplicity, rapidness, high precision and accuracy, the proposed methods can be used for the estimation of tramadol and ibuprofen in pharmaceutical preparations.     

Determination of Three Nonsteroidal Anti-Inflammatory Drugs in Human Plasma by LC Coupled with Chemiluminescence Detection

A simple and sensitive method was developed for the determination of three nonsteroidal anti-inflammatory drugs (NSAIDs)—ibuprofen, naproxen and fenbufen in human plasma. The method involved in column liquid chromatographic separation and chemilumenescence (CL) detection based on the CL reaction of NSAIDs, potassium permanganate (KMnO₄) and sodium sulfite (Na₂SO₃) in sulfuric acid (H₂SO₄) medium. The chromatographic separation was carried out using a reversed-phase C₁₈ column, which allowed the selective determination of the three medicines in the complicated samples. The special features of the CL detector provided lower LOD for determination than that of existing chromatographic alternatives. The results indicated that the linear ranges were 0.01–10.0 μg mL^?1 for ibuprofen, 0.001–1.0 μg mL^?1 for naproxen, and 0.01–10.0 μg mL^?1 for fenbufen. The limits of detection were 0.5 ng mL^?1 for ibuprofen, 0.05 ng mL^?1 for naproxen and 0.5 ng mL^?1 for fenbufen (S/N = 3). All average recoveries were in the range of 90.0–102.3%. Finally, the method had been satisfactorily applied for the determination of ibuprofen, naproxen and fenbufen in human plasma samples.     

Determination of Three Nonsteroidal Anti-Inflammatory Drugs in Human Plasma by LC Coupled with Chemiluminescence Detection

A simple and sensitive method was developed for the determination of three nonsteroidal anti-inflammatory drugs (NSAIDs)—ibuprofen, naproxen and fenbufen in human plasma. The method involved in column liquid chromatographic separation and chemilumenescence (CL) detection based on the CL reaction of NSAIDs, potassium permanganate (KMnO₄) and sodium sulfite (Na₂SO₃) in sulfuric acid (H₂SO₄) medium. The chromatographic separation was carried out using a reversed-phase C₁₈ column, which allowed the selective determination of the three medicines in the complicated samples. The special features of the CL detector provided lower LOD for determination than that of existing chromatographic alternatives. The results indicated that the linear ranges were 0.01–10.0 μg mL⁻¹ for ibuprofen, 0.001–1.0 μg mL⁻¹ for naproxen, and 0.01–10.0 μg mL⁻¹ for fenbufen. The limits of detection were 0.5 ng mL⁻¹ for ibuprofen, 0.05 ng mL⁻¹ for naproxen and 0.5 ng mL⁻¹ for fenbufen (S/N = 3). All average recoveries were in the range of 90.0–102.3%. Finally, the method had been satisfactorily applied for the determination of ibuprofen, naproxen and fenbufen in human plasma samples.

     

Mixing method influence on compatibility and polymorphism studies by DSC and statistical analysis

Most of the pharmaceutical products are formulated as solid dosage form, which may present drug–excipient interactions that lead to changes in the chemical nature of the drug, such as solubility and bioavailability and may compromise its safety and effectiveness. Differential scanning calorimetry (DSC) is a widely used method for the rapid evaluation of the drug-excipient compatibility and the stability of the mixture formed; however, there is no consensus on the preparation methods of the drug–excipient mixtures. The aim of this study was to investigate the influence of the mixing method on the drug–excipient compatibility studies by means of DSC analysis, using tenofovir disoproxil fumarate as a drug model. Statistical analysis revealed significant differences in the heat of fusion of the drug in the mixtures prepared by several mixing methods. Vortex Mixer with a Pop-Off Cup used for 3 min proved to be very satisfactory for these studies. A polymorphic transition was observed in the mixture prepared with the mortar and pestle. Therefore, this method should be avoided since it may induce errors in the interpretation of DSC results. In this way, the mixing method used to prepare a mixture for studies of interactions between the API and the excipients in a pharmaceutical formulation has a great influence on the results and it must be chosen carefully.     

Determination of pharmaceutical compounds in sewage sludge using a standard addition method approach

An analytical method for the simultaneous determination of eight pharmaceutical compounds in biosolids from urban wastewater treatment plants (WWTPs) was developed and validated. The compounds evaluated were non-steroidal anti-inflammatory drugs (naproxen, diclofenac, and ibuprofen), lipid regulators (clofibric acid), and antibiotics (sulfathiazole, sulfapyridine, sulfamethazine, and sulfamethoxazole). Ultrasound assisted extraction with a water–methanol solvent mixture (1:1, v:v) was performed and the compounds were then determined by liquid chromatography coupled with tandem mass spectrometry. The design of the method was based on the application of the standard addition calibration methodology to reduce matrix interferences. Validation procedures were conducted with rabbit excrements as blank samples. Recoveries of the target analytes ranged from 76 to 131% in spiked samples at 50, 200 or 1000 ng g^?1 dry weight (dw). The relative standard deviations were in the range of 5–15% and the method detection limits ranged from 2 to 12 ng g^?1dw. The method was applied to monitor pharmaceutical concentrations in biosolids from different WWTPs over an eight-month period (May to December 2011). Diclofenac, sulfapyridine and ibuprofen were detected in most of the samples whereas sulfamethazine and ibuprofen were the pharmaceuticals found in the highest concentrations (>200 ng g^?1 dw on average).     

The polythermal section of the Cu–Fe–Ni–S phase diagram constructed using directional crystallization and thermal analysis

The polythermal section of the Cu–Fe–Ni–S liquid–solid diagram in a field of equilibrium between sulfide melt L and monosulfide solid solution has been constructed using the quazi-equilibrium directional crystallization of melt Cu = 10.0, Fe = 38.5, Ni = 2.5, S = 49.0 mol% and DTA. The curves of distribution of Ni, Fe, Cu, and S in the sample were constructed. These data were used for determining the crystallization path in concentration tetrahedron and for calculating the distribution coefficients of components between solid and liquid solutions. To plot the liquidus line with the help of the DTA method, we determined the melting points of specially synthesized samples.     

Application of DLLME to Isolation and Concentration of Non-Steroidal Anti-Inflammatory Drugs in Environmental Water Samples

Dispersive liquid–liquid microextraction (DLLME) coupled with liquid chromatography-tandem mass spectrometry detection was applied for determination of selected anti-inflammatory pharmaceuticals: ibuprofen, ketoprofen, naproxen and diclofenac. Development of DLLME procedure included optimisation of several important parameters such as kind and volume of extracting and dispersive solvents as well as sample pH. Under optimised conditions a two-step extraction with sonication was used. Chloroform was applied as the extracting and acetone as dispersing solvent. Calibration curves ranges were 1–500 μg L^?1 for naproxen and ibuprofen and 0.25–500 μg L^?1 for ketoprofen and diclofenac with correlation coefficients at least 0.997. Limits of quantitation were from 0.5 to 10 ng L^?1. The developed analytical method was employed for determination of ibubrofen, ketoprofen, naproxen and diclofenac in river and tap water samples. The results showed that DLLME is a simple, rapid and sensitive analytical technique for the pre-concentration of trace amounts of pharmaceuticals in environmental water samples.     

Calorimetric studies of Ag–Sn–Cu dental amalgam alloy powders and their amalgams

The methods of directed crystallization and thermal analysis were used to construct the section Cu_0.19Fe_0.33S_0.48–Cu_0.31Fe_0.23S_0.46 of the liquid–solid diagram of the Cu–Fe–S system. Pyrrhotite solid solution (Fe, Cu)S_1±δ (Poss) and nonstoichiometric isocubanite Cu_1.1Fe_2.0S_3.0 (Icb*) form from melt (L) successively. Isocubanite forms at 970 °C by peritectic reaction L + Poss → Icb*. At 930 °C, peritectic reaction L + Icb* → Iss proceeds with formation of intermediate solid solution with average composition Cu_1.0Fe_1.2S_2.0 (Iss). On the basis of the results from this paper and earlier published works, we built a fragment of liquidus surface for the Cu–Fe–S system in the crystallization field of nonstoichiometric isocubanite and stoichiometric isocubanite CuFe₂S₃ (Icb).     

Thermodynamic performance of the NaNO3–NaCl–NaNO2 ternary system

Calculations of phase diagram for additive ternary molten salt system are carried out by the conformal ionic solution theory. The liquidus temperatures of the system NaNO₃–NaCl–NaNO₂ are determined according to different types of solid–liquid equilibrium and different values of the binary interaction coefficients. For the system NaNO₃–NaCl–NaNO₂, the calculated and experimental temperatures differ are very small below 673 K, but the oxidation and decomposition of the mixed salts are found when the temperature is higher than 673 K. Meanwhile, the eutectic point is obtained from calculated phase diagram and the eutectic temperature is 507 K. Thermal stability of this eutectic mixture is investigated by thermo-gravimetric analysis device. Experimental results show this kind of molten salt has a lower melting point (501.28 K), similar to solar salt (493 K). It is thermally stable at temperatures up to 819 K, and may be used up to 827 K for short periods.     

Fast and non–derivative method based on high–performance liquid chromatography–charged aerosol detection for the determination of fatty acids from Agastache rugosa (Fisch. et Mey.) O. Ktze. seeds

This study utilised response surface methodology to optimise the conditions for the extraction of A. rugosa seeds oil (ARO). Single–factor experiment and response surface methodology (RSM) were performed to identify the extraction time, liquid–solid ratio and extraction temperature that provided the highest yield of ARO. The optimal extraction time, liquid–solid ratio and extraction temperature were 8 h, 4:1 mL/g and 55 °C. The fatty acids (FAs) content and oil yield obtained through the optimised impregnation–extraction process were 19.67 mg/g and 32.1%. These values matched well with the predicted values. Linolenic acid was identified to be the main active ingredient of ARO. The high–performance liquid chromatography–charged aerosol detection method presented here is fast and does not require derivatisation. Therefore, it could be used to quantitatively analyse the FAs present in ARO and applied to detect compounds with low or no ultraviolet response.     

The section of the Fe–Ni–S phase diagram constructed by directional crystallization and thermal analysis

A nontrivial polythermal cross-section through the Fe–Ni–S phase diagram was plotted using a combination of directional crystallization and DTA methods. The crystallized sample was grown from the liquid (L) of the following composition Fe = 18, Ni = 35, and S = 47 at.%. It consisted of two single-phase sites formed from mss (Fe _z Ni_1?z )S_1±δ and hzss (Ni _z Fe_1?z )_3±δS₂. The phase reaction L + mss = hzss proceeded on the boundary between these sites. The trajectories of melt and solid composition on the Gibbs triangle were calculated from the distribution of components along the sample. The tie-line transformation was determined from these data. Liquidus temperatures along the trajectory were measured by the DTA method and calculated with the help of a mathematical model. The nontrivial cross-section of the diagram constructed from these data shows the phase equilibrium conditions. The cross-section consists of two tie-line linear surfaces L–mss and L–hzss.     

Study of Forced Degradation Behaviour of Brinzolamide Using LC–ESI–Q-TOF and In Silico Toxicity Prediction

Brinzolamide (BZA) is a topical ophthalmic drug which is generally used to lower the intraocular pressure during glaucoma. It was subjected to forced degradation studies under hydrolytic (acidic, basic), oxidative, photolytic and thermal stress conditions; the drug degraded significantly in hydrolytic and oxidative conditions, leading to the formation of seven degradation products in total. It was stable on exposure to light and dry heat in the solid state. An ultra-performance liquid chromatography (UPLC) method was developed on a Waters CSH phenyl hexyl column (100 × 2.1 mm, 1.7 µm), using gradient elution of 0.1 % formic acid and methanol as mobile phase. The method was extended to quadrupole time-of-flight mass spectrometry (Q-TOF–MS) for the structural characterisation. All degradation products were comprehensively characterised by UHPLC–ESI/MS/MS experiments. The most probable mechanisms for the formation of degradation products were also proposed. In silico toxicity of the drug and its degradation products was determined using TOPKAT toxicity prediction software.

     

Encapsulation of complementary model drugs in spray-dried nanostructured materials

Two model drugs of different physico-chemical and pharmaceutical properties (ibuprofen, acetaminophen) have been incorporated together or separately in silica-based microspheres using sol–gel and spray-drying processes. A variable amount of a neutral surfactant Brij-56© has also been added. The properties of the microspheres vary significantly depending on their composition. Three kinds of texture are identified: (1) silica containing spheroid nano-domains (formed by ibuprofen; diameters between 20 and 100 nm), (2) silica containing worm-like mesophases (formed by Brij-56© and both model drugs, typical correlation distances ~6 nm), (3) silica intimately mixed with the drug (acetaminophen) without visible phase-separation. The kinetics of drug release in simulated intestinal fluid strongly depend on these textures. The association of ibuprofen and acetaminophen in a single type of microsphere and without surfactant favours a concomitant release. Possible mechanisms of materials’ formation are discussed.     

Determination of Alkylphenols in Water by Dispersive Liquid–Liquid Microextraction Based on Solid Formation without a Disperser

Dispersive liquid–liquid microextraction based on solid formation without a disperser combined with high-performance liquid chromatography has been developed for the determination of 4-tert-butylphenol, 4-n-nonylphenol, and 4-tert-octylphenol. This method is rapid, easy, and uses only 10 µL of a low toxicity organic solvent (1-hexadecanethiol) for the extraction solvent and no disperser solvent. The extraction time and centrifugation time require less than 10 min. The linear range was 1–500 ng mL^?1 for 4-tert-butylphenol, 2–1000 ng mL^?1 for 4-tert-octylphenol, and 5–500 ng mL^?1 for 4-n-nonylphenol with r² ≥ 0.9986. The detection limits were between 0.2 and 1.5 ng mL^?1. The recoveries of lake and river water samples were in the range of 79% to 108%, and the relative standard deviations were 5% to 10%.     

Evaluation of the effect of nanoporous nanorods Zn<Subscript>2</Subscript>(bdc)<Subscript>2</Subscript>(dabco) dimension on ibuprofen loading and release

This work presents an experimental investigation of drug loading in metal-organic frameworks (MOFs). Porous metal organic framework [Zn₂(bdc)₂(dabco)] was synthesized under solvothermal conditions. Characterization of samples was studied by IR spectroscopy, X-ray powder diffraction, thermogravimetric analysis, ultraviolet–visible spectroscopy, N₂ adsorption porosimetry and scanning electron microscopy. In vitro cytotoxicity assessment and IC₅₀ values for the human hepatoma cell (HuH7) was determined by MTT assay. Two different sizes of Zn₂(bdc)₂(dabco) were prepared by solvothermal method under the presence and absence of modulator. The prepared samples were used for ibuprofen loading. Ibuprofen loadings of 22 and 30 % (w/w) were obtained for samples with average diagonal sizes of 250 and 100 nm, respectively. The release of ibuprofen from these materials was prolonged for 2 and 3 weeks for 250 and 100 nm samples, respectively. The results obtained in this study revealed that two significant factors, surface area and pore size, affect ibuprofen drug loading and release.     

Thermal,spectroscopic, and dissolution studies of ketoconazole–Pluronic F127 system

One strategy for improving the dissolution of poorly water soluble drugs is to prepare solid dispersions such as binary mixtures with hydrophilic carriers. These mixtures are generally characterized by better solubility than those of the individual components from which they are formed. In the present study, solid dispersions of ketoconazole (KET) with Pluronic F127 (PLU) were prepared by the grinding method. Solid–liquid equilibria in the system being studied were investigated by differential scanning calorimetry. A phase diagram for the whole range of compositions was constructed. The investigation revealed that ketoconazole and Pluronic F127 form a simple eutectic system containing 4.4 % w/w of ketoconazole at the eutectic point. The results of Fourier transform infrared spectroscopy and X-ray powder diffractometry studies of obtained mixtures suggest that there is no drug-carrier interaction and both components are crystalline in the solid dispersion with the whole range of composition. The prepared mixtures show an appreciable improvement of the dissolution rate of KET in 0.5 % w/v sodium lauryl sulfate. The improvement of the dissolution rate of drug is additionally increased by effective solubilization.     

Efficient hydrolyzation of cellulose in ionic liquid by novel sulfonated biomass-based catalysts

A green and effective approach for comprehensive hydrolyzation of cellulose has been described. Several carbon-based solid acids were successfully prepared using various biomass (glucose, microcrystalline cellulose, bamboo, and rice husk) and used to catalyze cellulose hydrolysis. The acid groups (–SO₃H and –COOH) were successfully introduced onto the surface of the carbon-based solid acid catalysts as evidenced by Fourier transform infrared spectroscopy and X-ray photoelectron spectroscopy. The structure of the prepared catalysts was characterized by scanning electron microscope and X-ray diffraction. The catalysts showed excellent catalytic performance for hydrolysis of cellulose. To improve the reaction efficiency, ball-milling and solubilization in ionic liquids of cellulose were adopted. A maximum total reducing sugar yield of 81.8 % was obtained in ionic liquid 1-butyl-3-methyl imidazolium chloride at 125 °C for 90 min when the water addition was 10 % of ionic liquid. This study provided a promising strategy to synthesize solid acids from lignocelluloses, which were further used to convert biomass into biofuels and platform chemicals.     

Determination of Eleutherosides in Dietary Supplements by LC–MS/MS

A simple and specific method for the simultaneous determination of eleutherosides B and E in powdered rhizomes of Eleutherococcus senticosus extract and in solid and liquid dietary supplements was developed and validated. E. senticosus extracts, often mixed with other plants or herbal extracts, are widely used in food supplements because of the tonic and adaptogenic activities referred to the eleutherosides B and E. In this study, samples were analyzed by a liquid chromatography-electrospray tandem mass spectrometry (LC–ESI-MS/MS) method operated in single reaction monitoring (SRM). Validation was carried out in terms of limit of detection (LOD), limit of quantitation (LOQ), linearity, precision and trueness. LOD and LOQ values were fixed at 3 μg L^?1 and 10 μg L^?1, respectively, whereas linearity was established within 10–1,000 μg L^?1 range for both compounds. Good precision was obtained for both eleutherosides in terms of intra-day precision (RSD % lower than 4 %) and inter-day precision (RSD % lower than 6 %). Good percentage recoveries were obtained for both eleutherosides (91.5–103.6 %). Finally, the developed method was successfully applied to analyze a number of solid and liquid commercial dietary supplements containing E. senticosus extracts, also mixed with other herbal extracts.     

LC–MS–MS Separation and Simultaneous Determination of Tolterodine and its Active Metabolite, 5-Hydroxymethyl Tolterodine in Human Plasma

A selective, sensitive and high throughput LC–MS–MS method has been developed and validated for the chromatographic separation and quantitation of tolterodine (TOL) and its metabolite 5-hydroxymethyl TOL in human plasma. Sample clean-up concerned liquid–liquid extraction of the drug, metabolite and their respective labelled internal standards from 300 μL human plasma. Both the analytes were chromatographically separated on a Symmetry C18 (100 mm × 4.6 mm, 5 μm particle size) analytical column using 10 mM ammonium formate (pH 5.0 ± 0.1, adjusted with formic acid) and acetonitrile (35:65, v/v) as the mobile phase with a resolution factor of 2.72. The method was validated over the concentration range of 0.025–10.0 ng mL^?1 for both analytes. The process efficiency found for TOL and its metabolite was 98.3 and 99.5%, respectively. The method was successfully applied to a pivotal bioequivalence study in 41 healthy human subjects after oral administration of a 2 mg tablet formulation under fasting conditions.     

Fatty acids profiling of avocado seed and pulp using gas chromatography–mass spectrometry combined with multivariate chemometric techniques

In the present study, the profiling of 17 fatty acids (FAs) in avocado seed and pulp was investigated. The fatty acids were extracted with vortex-assisted extraction, methyl esterified and finally preconcentrated by dispersive liquid–liquid microextraction. The preconcentrated fatty acid methyl esters (FAMEs) were analyzed using gas chromatography–mass spectrometry (GC–MS) to obtain qualitative and quantitative information. The GC–MS data were analyzed using multivariate curve resolution-alternating least squares (MCR-ALS) method to overcome general chromatographic problems such as overlapped peaks, background interference and peak shifts. The calibration data were prepared using pure analytical information obtained by MCR-ALS. The linear dynamic ranges and regression coefficients (R ²) for FAMEs were in the range of 0.19–65 mg L^?1 and 0.990–0.999, respectively. The relative standard deviation (RSD%) for determination of FAs in avocado seed and pulp was 0.17–8.84 and 0.64–17.93, respectively. The main FAs in the avocado pulp were: oleic acid (74.25 g Kg^?1), linoleic acid (26.87 g Kg^?1), palmitic acid (26.02 g Kg^?1), palmitoleic acid (1.22 g Kg^?1) and stearic acid (0.05 g Kg^?1). And, the main FAs in the avocado seed were: linoleic acid (1.09 g Kg^?1), palmitic acid (0.47 g Kg^?1), oleic acid (0.33 g Kg^?1), linolenic acid (0.12 g Kg^?1), and palmitoleic acid (0.04 g Kg^?1).