High-temperature separation with polymer-coated fiber in packed capillary gas chromatography

High-temperature gas chromatographic separation of several synthetic polymer mixtures with Dexsil-coated fiber-packed columns was studied. A bundle of heat-resistant filaments, Zylon, was longitudinally packed into a short metal capillary, followed by the conventional coating process with Dexsil 300 material. Prior to the packing process the metal capillary was deactivated by the formation of a silica layer. The typical size of the resulting column was 0.3-mm i.d., 0.5-mm o.d., 1-m length, and packed with about 170 filaments of the Dexsil-coated Zylon. The column temperature could be elevated up to 450°C owing to the good thermal stability of the fiber, Dexsil coating, and metal capillary; furthermore, this allowed the separation of low-volatile compounds to be studied.     

Short metal capillary columns packed with polymer-coated fibrous materials in high-temperature gas chromatography

The high-temperature gas chromatographic (GC) separation of several semivolatile compounds is studied with a short metal capillary column packed with fibrous material, having a polydimethylsiloxane coating thereon. Taking advantage of the excellent heat-resistance of the fiber and also the combination of the surface-deactivated metal capillary, a temperature-programmed separation up to 450 degrees C is successfully demonstrated for the separation of polymer standard samples. The average molecular weight of the commercially-available polymer standard samples for size exclusion chromatography (SEC) is estimated by high-temperature GC analysis and compared with the nominal value determined by a conventional SEC method. Although a slight deviation for the number-average molecular weight is observed between the GC and SEC analysis, the data for the weight-average molecular weight shows a good agreement in these methods. The results also suggest the future possibility of the fiber-packed metal capillary as a miniaturized GC column with an increased sample loading capacity.     

Capillary electrochromatography using fibers as stationary phases.

Fiber-packed capillary columns have been evaluated in chromatographic performance in capillary electrochromatography (CEC). The change of electroosmotic flow (EOF) velocity and selectivity using different kinds of fiber materials was examined. Although the EOF velocity among the different fiber packed columns was almost the same, retention of parabens was larger on the Kevlar-packed column than on the Zylon-packed one, and was larger on the as-span-type fiber-packed column than on the high-modulus-type packed one. Using 200 microm ID x 5 cm Kevlar packed column combined with a 100 microm ID x 20 cm precolumn capillary and a 530 microm ID x 45 cm postcolumn capillary, the separation of three parabens within 30 s was achieved. Other compounds were also separated in a few minutes by the fiber-packed CEC method.     

Dynamic headspace analysis of trace volatile components in polymeric materials by wide bore capillary gas chromatography

A novel dynamic headspace gas chromatographic system equipped with a wide bore capillary column was constructed for direct analysis of less volatile components in polymeric materials such as coating paints. With this system, the determination of typical paint additives such as hindered amine light stabilizers and ultraviolet absorbers could be carried out within a short time.     

Fiber-packed needle for dynamic extraction of aromatic compounds

A fiber-packed needle was developed as a novel extraction device for gas-chromatographic analysis of trace organic compounds in aqueous samples. In the extraction device, a bundle of the polymer-coated filaments as the sorbent material was longitudinally packed into a specially designed needle. The extraction was made by pumping the aqueous sample solution into the needle extraction device, and the subsequent desorption process was carried out with a flow of desorption solvent through the needle in a heated gas chromatograph injector. The needle device showed an excellent thermal stability for repeated use without any deterioration of extraction performance, and no carryover effect was observed after the optimization of the desorption conditions. Additionally, the extraction efficiency of the fiber-packed needle could be enhanced by optimizing the number of packed filaments. The selectivity for various compounds could be also tuned using an appropriate combination of the fibrous medium and the coating polymer. The relative standard deviation for run to run was from 3.88 to 4.55% (n = 5), and that for needle to needle was 7.21% (n = 3), clearly suggesting a good repeatability of the needle extraction technique developed. Upon successful optimization of the extraction conditions, a rapid extraction of trace organic compounds from an aqueous sample matrix was successfully demonstrated, where each extraction process was completed within 10 min.     

In-Valve Sample Preparation Cartridge Designed for Microcolumn Liquid Chromatography

Miniaturized sample preparation technique for complex sample matrices has been developed with a polymer-coated fibrous extraction medium. By using extraction cartridge packed longitudinally with polymer-coated fiber into a short PEEK capillary, the extraction efficiency was significantly improved. The extraction cartridge was installed in an injection valve as a sample loop and the on-line coupling with microcolumn liquid chromatography (micro-LC) was demonstrated. This on-line coupled sample preparation/separation system showed a good validity for the analysis of phthalates and tricyclic antidepressant drugs in typical water samples. The lowest limits of quantification for several phthalates and tricyclic antidepressants (TCA) drugs were less than 1 ng mL^?1. The effect of polymeric coating on the filament surface on the extraction power was also investigated.     

Fiber-packed needle-type sample preparation device designed for gas chromatographic analysis

A miniaturized sample preparation technique that uses a fine-fiber-packed needle as the extraction medium is reviewed, especially in relation to its application to the analysis of volatile organic compounds by gas chromatography. When the needle was packed longitudinally with a bundle of fine filaments (12 μm o.d.) which were also surface-coated with polymeric materials, successful sample preconcentration was obtained. Improved sensitivity was also established by introducing simultaneous derivatization reactions into the extraction process in the fiber-packed needle. The storage performance of the needle clearly demonstrated the potential of the technique for typical on-site sampling during environmental analysis. In this short review, the fiber-packed extraction needle developed by the authors is summarized along with applications that use the fiber-packed needle as a miniaturized extraction device.     

An insight into the phenomena involved in a multiple-function stationary phase for the capillary electrochromatographic separation of 2'-, 3'-, and 5'-monophosphorylated nucleoside isomers

The electrochromatographic separations of 2'-, 3'- and 5'-monophosphates of adenosine, guanosine, cytidine, and uridine were carried out with an open-tubular capillary column which was wall-coated with a highly selective reagent, 28-membered macrocyclic polyamine, 4, 8, 12, 18, 22, 26-hexaaza-1,15-dioxacyclooctaeicosane ([28]ane-N6O2). The effects of pH, composition and concentration of background electrolyte (BGE), applied voltage, column length, and the additive of the BGE, such as metal ions, borate, beta-cyclodextrin and organic solvent on the separation of these monophosphorylated nucleotide isomers were investigated. The results suggested that the interactions between analytes and the bonded groups on the wall predominantly comprise anion coordination and anion exchange in addition to the electrophoresis. A well-resolved electrochromatogram was obtained with the capillary column of 100 cm (75 cm effective length) x 75 microm inside diameter (ID), citrate buffer (20 mM, pH 3.99), applied voltage of -22 kV and detection at 254 nm. Column efficiency was found with the average theoretical plate numbers of 119,500/m and a low detection limit of 0.01 microM level could be achieved for the separation of these isomers.     

Preparation of capillary columns coated with linear polymer containing hydrophobic and charged groups for capillary electrochromatography

A linear polymer-coated capillary was prepared by in-capillary copolymerization of N-tert-butylacrylamide (TBAAm) with a charged monomer, 2-acrylamido-2-methyl-1-propanesulfonic acid (AMPS), after the capillary pretreatment with a bifunctional reagent. The coated capillaries were applied in capillary electrochromatographic (CEC) separation of small neutral compounds. Hydrophobic groups in the linear polymer, which were immobilized onto the capillary surface, functioned as the stationary phase in reversed-phase CEC separation, and charged groups in the linear polymer generated electroosmotic flow (EOF) along the column. The coated capillaries were prepared by a simple procedure. Moreover, the reproducibility with respect to EOF rate and migration times of the solutes was excellent. The results for CEC separation of small molecules using the linear polymer-coated capillaries are presented.     

Miniaturization of capillary electrochromatography using an ultrashort capillary column

The instrumentation for miniaturization of capillary electrochromatography was devised and an injection method for this apparatus was proposed. By using an ultra short capillary column (15 mm packed length, 36 mm total length, 75 microm inner diameter, packed with cation exchange supports), the separation of five biochemical compounds was performed within 1 min. The high separation efficiency of 9780 plates was achieved by using an ultrashort capillary column. The miniaturized instrumentation for capillary electrochromatography might be utilized as one of the possible methods in microfabricated analysis or in an alternative approach to it.     

Simultaneous derivatization/preconcentration of volatile aldehydes with a miniaturized fiber-packed sample preparation device designed for gas chromatographic analysis

A novel in-needle sample preparation device has been developed for the determination of volatile aldehydes in gaseous samples. The needle device is designed for the gas chromatographic (GC) analysis of aldehydes and ketones commonly found in typical in-house environments. In order to prepare the extraction device, a bundle of polymer-coated filaments was longitudinally packed into a specially designed needle. Derivatization reactions were prompted by 2,4-dinitrophenylhydrazine (NDPH) included in the needle, and so the aldehydes and ketones were derivatized to the corresponding hydrazones and extracted with the extraction needle. A reproducible extraction needle preparation process was established, along with a repeatable derivatization/extraction process that ensures the successful determination of aldehydes. The storage performance of the extraction needle was also evaluated at room temperature for three days. The results demonstrate the successful application of the fiber-packed extraction device to the preparation of a gaseous sample of aldehydes, and the future possibility of applying the extraction device to the analysis of in-house environments.     

Fast separation of oligonucleotide and triplet repeat DNA on a microfabricated capillary electrophoresis device and capillary electrophoresis

A laser-induced fluorescence detection system coupled with a highly sensitive silicon-intensified target (SIT) camera is successfully applied to the imaging of a band for DNA fragment labeling by fluorescence dye in a microchannel, and to the visualizing of the separation process on a microfabricated chip. We demonstrated that an only 6 mm separation channel is sufficient for the separation of triplet repeat DNA fragment and DNA molecular marker within only 12 s. The separation using the microfabricated capillary electrophoresis device is confirmed to be at least 18 times faster than the same separation carried out by conventional capillary electrophoresis with 24.5 cm effective length. The use of a short capillary with 8.5 cm effective length is also efficient for fast separation of DNA; however, the microchip technology is even faster than capillary electrophoresis using a short capillary.     

Comparison of packed and capillary columns for quantitative gas chromatography of triglycerides in milk fat

Summary Quantitative gas chromatography of triglycerides in conjunction with established triglyceride formulae can be used to determine various milk fat parameters. Since the evaluation of, for example, iodine number or content of non-milk fats (foreign fats) in milk fat requires only the separation of triglycerides by carbon number and since repeatabilities, especially of the highboiling triglycerides, have been less acceptable with capillary columns in the past, packed columns have been used exclusively. There is, however, an increasing demand for the use of capillary instead of packed columns and to that end the present investigation has been carried out. To achieve a suitable resolution, with this particularly exacting high-temperature application, a short 5 m capillary column of extreme temperature stability has been used. As well as modification of various analytical conditions different injection techniques have been investigated. On-column, PTV and split injection were compared with regard to repeatability. The cold-on-column injection technique was found to produce the best results, being comparable to the excellent precision of a packed column. Thus, a method is now available by means of which the determination of milk fat parameters by the triglyceride formulae, such as the amount of foreign fats in milk fat, can now be carried out with a standardized capillary column.     

Separation of Compounds in Traditional Chinese Medicines Using Comprehensive Two Dimensional Chromatography

Traditional Chinese medicine is an invaluable treasure of the Chinese nationalities. Thousands of natural species that are of pharmaceutical importance have been accumulated. Most of them are plants. Traditional Chinese medicines generally are of unusual complexity. Even a single medicinal material may contain hundreds of compounds. Since these compounds play cooperative roles pharmacologically, it is essential to analyze all compounds as a whole. It is also important for quality controls in each step of productions, such as raw material collection, processing, and manufacturing. A comprehensive two-dimensional separation system coupling capillary high performance liquid chromatography with fast capillary electrophoresis (μ-HPLC-CE) is developed to provide a powerful means to separate such complex samples. In the first dimensional separation, a home-packed micro-HPLC column was used to reduce the consultation of sample injection and avoid sample dilution. The second dimensional analysis was carried out by micellar electrokinetic chromatography(MEKC) considering the fact that most compounds in Chinese medicine are neutrals. In order to achieve high-speed separation^ theory of fast MEKC was extensively studied. Models of the fast MEKC migration behaviors were established. Relationships of theoretical plates vs. electric field strength and column length were derived. It is concluded that maintaining certain column length and applying high-voltage at the ends of the capillary simultaneously are the key points to achieving fast MEKC separation. A pulse-contacting interface was developed for the 2-D μ-HPLC-CE system. CE sampling was carried out in an instant contact of HPLC and CE columns in an optimized timing program. During the short contact period, a certain fraction of HPLC effluent was introduced into the CE capillary. Injection efficiency for such an interface was up to 81%. Relative standard deviation (RSD) of migration times and peak heights for 100 consecutive MEKC. separation were 3.0% and 1.8%, respectively. With this novel 2-D μ-HPLC-CE system, some traditional Chinese medicines were analyzed and hundreds of peaks were observed. For liquorice, over 110 components were fairly resolved. More than 250 peaks were obtained for a compound mixture of Cheng-Qi-Tang. The peak capacity of this novel comprehensive 2-D HPLC-CE system was estimated to be about 2400 in 80 min.     

Fast Temperature Programming in Gas Chromatography using Resistive Heating

The features of a resistive-heated capillary column for fast temperature-programmed gas chromatography (GC) have been evaluated. Experiments were carried out using a commercial available EZ Flash GC, an assembly which can be used to upgrade existing gas chromatographs. The capillary column is placed inside a metal tube which can be heated, and cooled, much more rapidly than any conventional GC oven. The EZ Flash assembly can generate temperature ramps up to 1200°/min and can be cooled down from 300 to 50°C in 30 s. Samples were injected via a conventional split/splitless injector and transferred to the GC column. The combination of a short column (5 m×0.25 mm i. d.), a high gas flow rate (up to 10 mL/min), and fast temperature programmes typically decreased analysis times from 30 min to about 2.5 min. Both the split and splitless injection mode could be used. With n-alkanes as test analytes, the standard deviations of the retention times with respect to the peak width were less than 15% (n = 7). First results on RSDs of peak areas of less than 3% for all but one n-alkane indicate that the technique can also be used for quantification. The combined use of a short GC column and fast temperature gradients does cause some loss of separation efficiency, but the approach is ideally suited for fast screening as illustrated for polycyclic aromatic hydrocarbons, organophosphorus pesticides, and triazine herbicides as test compounds. Total analysis times – which included injection, separation, and equilibration to initial conditions – were typically less than 3 min.     

Influence of polymeric coating on capillary electrophoresis of iron oxide nanoparticles

In this work, electrophoresis was successfully used to separate three different polymer-coated magnetic iron oxide nanoparticles with similar sizes (nominally 50 nm) using high-pH borate buffer system. The coating polymers were dextran, polyethylene glycol, or carboxymethyl dextran. The results showed that the migration time of carboxymethyl dextran coated nanoparticles is the longest due to relatively more negative surface charges. Investigation of the effects of buffer concentration, pH, electric field strength and the capillary temperature, on electrophoretic properties of samples was also carried out. The results showed that pH, electric field strength and the capillary temperature had indirect relations with both of the migration time and the separation resolution of three different polymer-coated nanoparticles while the buffer concentration had a direct relation.     

Nanoflow liquid chromatography-tandem mass spectrometry for the characterization of intact phosphatidylcholines from soybean, bovine brain, and liver

Nanoflow liquid chromatography-electrospray ionization tandem-mass spectrometry (nanoLC-ESI-MS-MS) was applied for the characterization of intact phosphatidylcholine (PC) lipid molecules using a homemade reversed phase capillary column with a pulled tip for direct ESI at positive ion mode. Prior to the analytical column, a short capillary trapping column was utilized for on-line pre-concentration via microcross connection. Separation of intact phosphatidylcholines in the nanoflow LC column was carried out using a binary gradient elution method at 300 nL/min. The structures of the eluted PC components were determined by analysis of the typical fragment ions of PC molecules obtained from collision-induced dissociation (CID) after each precursor scan in mass spectrometry. In the current study, nanoflow LC-ESI-MS-MS analysis of PC molecules demonstrated the ability to obtain clear structural information, such as alkyl chain lengths and the degree of unsaturation with a protonated molecule ([M + H]+) and its characteristic fragment ions ([M + H-RCH2COOH]+, [M + H-RCH=C=O]+, and [M + H-184]+). Results from the nanoflow LC-ESI-MS experiment showed the limit of detection at 3.5 fmol for the 14:0/14:0-PC standard. This technique then was applied to intact PC extracts from soybean, bovine brain, and liver without derivatization and resulted in the identification of 28, 25, and 39 phosphatidylcholines, respectively. The LC-MS-MS method has been shown to be useful for the analysis of low concentration PC molecules in biological samples.     

Nano and rapid resolution liquid chromatography–electrospray ionization–time of flight mass spectrometry to identify and quantify phenolic compounds in olive oil

The applicability of nanoLC‐ESI‐TOF MS for the analysis of phenolic compounds in olive oil was studied and compared with a HPLC method. After the injection, the compounds were focused on a short capillary trapping column (100 μm id, effective length 20 mm, 5 μm particle size) and then nanoLC analysis was carried out in a fused silica capillary column (75 μm id, effective length 10 μm, 3 μm particle size) packed with C18 stationary phase. The mobile phase was a mixture of water + 0.5% acetic acid and ACN eluting at 300 nL/min in a gradient mode. Phenolic compounds from different families were identified and quantified. The quality parameters of the nanoLC method (linearity, LODs and LOQs, repeatability) were evaluated and compared with those obtained with HPLC. The new methodology presents better sensitivity (reaching LOD values below 1 ppb) with less consumption of mobile phases, but worse repeatability, especially inter‐day repeatability, resulting in more difficulties to get highly accurate quantification. The results described in this article open up the application fields of this technique to cover a larger variety of compounds and its advantages will make it especially useful for the analysis of samples containing low concentration of phenolic compounds, as for instance, in biological samples.     

毛细管区带电泳峰形变化规律的研究

采用指数修正的高斯模型（ＥＭＧ）,研究了进样时间、分离电压及柱长等一系列操作条件对毛细管区带电泳峰形参数的影响。实验结果表明,进样时间对半峰宽（Ｗ１／２）和峰不对称度（Ｂ／Ａ）有显著影响;电压对以长度表示的半峰宽及峰拖尾参数无显著影响;ｔｍ与σ、τ、Ｗ１／２（ｓ）之间都有很好的线性关系;随着柱长的增大,σ、τ、Ｗ１／２都略有增加。     

Potential of poly(styrene-<Emphasis Type="Italic">co</Emphasis>-divinylbenzene) monolithic columns for the LC-MS analysis of protein digests

Two polystyrene-based capillary monolithic columns of different length (50 and 250 mm) were used to evaluate the effects of column length on gradient separation of protein digests. A tryptic digest of a 9-protein mixture was used as a test sample. Peak capacities were determined from selected extracted ion chromatograms, and tandem mass spectrometry data were used for database matching using the MASCOT search engine. Peak capacities and protein identification scores were higher for the long column with all gradients. Peak capacities appear to approach a plateau for longer gradient times; maximum peak capacity was estimated to be 294 for the short column and 370 for the long column. Analyses with similar gradient slope produced a ratio of the peak capacities of 3.36 for the long and the short column, which is slightly higher than the expected value of the square root of the column length ratio. The use of a longer monolith improves peptide separation, as reflected by higher peak capacity, and also increases protein identification, as observed from higher identification scores and a larger number of identified peptides. Attention has also been paid to the peak production rate (PPR, peak capacity per unit time). For short analysis times, the short column produces a higher PPR, while for analysis times longer than 40 min, the PPR of the 250-mm column is higher.