Determination of the UV filters worldwide authorised in sunscreens by high-performance liquid chromatography. Use of cyclodextrins as mobile phase modifier

Simultaneous determination of organic UV filters worldwide authorised in sunscreen formulations was performed by HPLC with UV spectrophotometric detection. The filters determined were: benzophenone-4, benzophenone-3, butyl methoxydibenzoylmethane, octyl dimethyl PABA, octyl methoxycinnamate, homosalate and octyl salicylate. A C18 stationary phase and an isocratic mobile phase of ethanol-water-acetic acid (70:29.5:0.5) containing 65.4 mM of hydroxypropyl-beta-cyclodextrin, were used with a flow-rate of 0.6 ml/min. UV measurements were carried out at 313 nm. The time required for the analysis was 20 min and the limits of detection were between 1.5 and 2.3 mg/l. The procedure proposed provides a green analytical method with a basic instrumental configuration, it is fast and accurate and does not involve highly toxic organic solvents.     

A reversed-phase ion-interaction chromatographic method for in-vitro estimation of the percutaneous absorption of water-soluble UV filters

An analytical method based on ion-interaction chromatography with UV detection for simultaneous in-vitro estimation of the percutaneous absorption of the most used water-soluble UV filters in sunscreen cosmetics is proposed. These UV filters were phenylbenzimidazole sulfonic acid, disodium phenyl dibenzimidazole tetrasulfonate, benzophenone-4, and terephthalylidene dicamphor sulfonic acid. The methodology is based on applying the sunscreen containing the target UV filters to human epidermis in a diffusion cell. Analytes are determined in the receptor solution. To ensure skin integrity, screening of the cells was carried out by analytical determination of a marker. Analytical variables such as percentage ethanol, concentration of ion-pairing agent, pH of the mobile phase, and temperature were studied in order to achieve high resolution of the chromatographic peaks in the lowest possible time of analysis. The conditions selected consisted of a mobile phase composed of 35:65 (v/v) ethanol–ammonium acetate buffer solution (pH 4, containing 50 mmol L⁻¹ tetra-n-butylammonium bromide). The chromatographic determination was carried out with the analytical column at 50 °C. UV detection was carried out at the maximum absorption wavelength for each analyte. The limit of detection (3s _y/x /b) ranged from 16 to 65 ng mL⁻¹, depending on the analyte.     

Development of a HPLC method for determination of four UV filters in sunscreen and its application to skin penetration studies

This study describes the development, validation and application of a high‐performance liquid chromatography (HPLC) method for the simultaneous determination of the in vitro skin penetration profile of four UV filters on porcine skin. Experiments were carried out on a gel‐cream formulation containing the following UV filters: diethylamino hydroxybenzoyl hexyl benzoate (DHHB), bis‐ ethylhexyloxyphenol methoxyphenyl triazine (BEMT), methylene bis‐ benzotriazolyl tetramethylbutylphenol (MBBT) and ethylhexyl triazone (EHT). The HPLC method demonstrated suitable selectivity, linearity (10.0–50.0 μg/mL), precision, accuracy and recovery from porcine skin and sunscreen formulation. The in vitro skin penetration profile was evaluated using Franz vertical diffusion cells for 24 h after application on porcine ear skin. None of the UV filters penetrated the porcine skin. Most of them stayed on the skin surface (>90%) and only BEMT, EHT and DHHB reached the dermis plus epidermis layer. These results are in agreement with previous results in the literature. Therefore, the analytical method was useful to evaluate the in vitro skin penetration of the UV filters and may help the development of safer and effective sunscreen products.     

Determination of water-soluble UV-filters in sunscreen sprays by liquid chromatography

Liquid chromatography was used for the determination of the three most used water-soluble UV filters, benzophenone-4 (BZ4), terephthalylidene dicamphor sulfonic acid (TDS), and phenylbenzimidazole sulphonic acid (PBS), in aqueous sunscreen sprays. A C18 stationary phase and an isocratic mobile phase of EtOH-20 mM sodium acetate buffer of pH 4.6 (30:70, v/v) were used at a flow-rate of 0.5 ml min(-1). Mobile phase was also used as solvent for samples and standards. UV detection was at 313 nm. The analytical run took 5.5 min. The limits of detection were 0.5, 0.9 and 2 microg ml(-1) for BZ4, TDS and PBS, respectively. The proposed method does not involve highly toxicsolvents.     

超高效液相色谱-二极管阵列检测法同时测定化妆品中22种防晒剂

建立了一种超高效液相色谱-二极管阵列检测法同时测定不同种类化妆品中22种防晒剂的方法。样品首先加入少量四氢呋喃,涡旋、分散、混匀(蜡质化妆品可于50 ℃超声,以便分散完全),然后加入0.1%(v/v)甲酸乙醇溶液振摇、超声提取,稀释、过滤后经Poroshell 120 EC-C₁₈(100 mm×4.6 mm, 2.7 μm)分离,乙腈-异丙醇-50 mmol/L乙酸铵水溶液(含0.05%(v/v)甲酸)梯度洗脱,二极管阵列检测器检测,检测波长311 nm,外标法定量。结果表明,22种防晒剂在各自的范围内线性关系良好,相关系数(r)均在0.998以上。选取两种不同基质类型的样品,在低、中、高3个不同添加水平下的平均回收率为85.2%~112.3%,相对标准偏差(RSD)在0.5%~6.5%之间,方法的检出限和定量限分别为0.7~64 mg/kg和2.4~215 mg/kg。在2、10、50 mg/L3个水平的混合标准溶液的稳定性试验中,甲酚曲唑三硅氧烷组分12 h内稳定,其余组分36 h内稳定。采用该方法测定市售16份化妆品中的防晒剂,其中5份样品检测结果与厂家提供的配方值匹配良好。与《化妆品安全技术规范》(2015年版)收载方法相比,该方法在流动相组成和提取溶剂选择方面,摒弃了四氢呋喃和高氯酸等腐蚀性溶剂的使用,改善了弱极性组分的提取效率,同时增加了检测组分二苯酮-2,被测物稳定性更好,实验操作更便利高效,分离效果更好,结果更准确,兼顾绿色环保,可用于化妆品防晒剂的日常检测。     

Fast liquid chromatography-diode array detection assisted by chemometrics for quantification of seven ultraviolet filters in effluent wastewater

A fast chromatographic method is presented for simultaneous quantification of seven organic ultraviolet (UV) filters (benzophenone-3,4-methylbenzilidene camphor, octocrylene, 1-(4-tert-butylphenyl)-3-(4-methyoxyphenyl)1,3-propanedione), ethylhexyl methoxy cinnamate, ethylhexyl salicylate and homosalate) in effluent wastewater samples. The UV filters were pre-concentrated by Bond Elut-ENV cartridges and separated on an ODS column (15 cm × 0.46 cm, 5 μm) in less than 2.5 min using a non-aqueous mobile phase of methanol-acetonitrile (50:50, v/v) with flow-rate of 1.5 mL min⁻¹. Appropriate baseline correction through asymmetric least squares was applied to reduce the matrix of background signals in three way data. Then, second-order calibration based on multivariate curve resolution-alternating least squares (MCR-ALS) was implemented on the unfolded three-way data obtained from liquid chromatography with diode array detection (LC-DAD) through standard addition calibration method for handling co-eluted peaks, systematic and proportional errors. Recoveries ranging from 76% to 130% and %RSD values less than 11.2 for all UV filter shows the accuracy and precision of the proposed method in wastewater samples. In addition, statistical t-test as well as computed elliptical joint confidence region (EJCR) confirms the accuracy of the proposed method and indicates the absence of both constant and proportional errors in the predicted concentrations. This study demonstrates that coupling of the fast HPLC-DAD method with powerful algorithm of MCR-ALS can be considered as an efficient method for quantification of UV filters in highly contaminated samples of wastewaters where both time and cost per each analysis can be reduced significantly.     

Determination of UV-filters in sunscreens by HPLC

Simultaneous determination of six internationally authorised organic UV-filters in sunscreen formulations was performed by HPLC with UV spectrophotometric detection. The filters determined were: sulisobenzone, oxybenzone, octyl dimethyl PABA, octyl methoxycinnamate, octyl salicylate and homosalate. A C18 stationary phase and a mobile phase of ethanol water acetic acid (70:29.5:0.5) were used with a flow rate of 0.5 mL/min. UV measurements were carried out at 313 nm. The time required for the analysis was 25 min and the limits of detection were between 0.2 and 2 mg/L, except for sulisobenzone, which gave a limit of detection of 20 mg/L. The procedure proposed provides an accurate, fast and green analytical method, that does not involve toxic organic solvents.     

Simultaneous trace determination of nine organic UV-absorbing compounds (UV filters) in environmental samples

A new sensitive method has been successfully developed and validated for the simultaneous determination and quantification of nine estrogenic UV filters (benzophenone-1, benzophenone-2, benzophenone-3, benzophenone-4, 4,4-dihydroxybenzophenone, ethyl-4-aminobenzoate, 2-ethyl-hexyl-4-trimethoxycinnamate, 3-(4-methylbenzylidene)-camphor, 3-benzylidene-camphor) in different environmental matrices. After optimisation of extraction conditions for the best recovery of polar to lipophilic compounds from fish tissue and a subsequent lipid clean-up in HPLC, fish extraction recoveries exceeded 72% for all nine UV filters. Identification and quantification of compounds was performed for lipophilic UV filters with gas chromatography-electroionisation-mass spectrometry and for polar and mid-polar compounds with liquid chromatography coupled to electrospray ionisation mass spectrometry. Instrumental detection limits (IDL) varied between 5 and 260 pg injected and method detection limits (MDL) were in the low ng/g lipids range for all test compounds. The described analytical methods are shown to be useful to screen for estrogenic UV filters in environmental samples such as fish and polar organic chemical integrative samplers.     

Stir Bar Sorptive Extraction and LC–MS/MS for Trace Analysis of UV Filters in Different Water Matrices

A simple, selective and highly sensitive method was developed and optimized to determine the most commonly used UV filters with endocrine-disrupting potential in water, namely benzophenone-3 (BP-3), octocrylene (OC), ethylhexyl dimethyl p-aminobenzoate (OD-PABA), ethylhexyl methoxycinnamate, ethylhexyl salicylate (EHS) and homosalate (HMS). Samples were extracted by stir bar sorptive extraction followed by liquid desorption (SBSE-LD). The important factors influencing SBSE-LD were optimized. Under optimal conditions, assays were performed on 50 mL of water sample using stir bars (0.5 mm in film thickness, 10 mm in length) at room temperature. The analytes were determined by liquid chromatography–tandem mass spectrometry with triple quadrupole analyzer using atmospheric pressure chemical ionization. The main parameters in HPLC–APCI–MS/MS were also optimized to provide the best performances for all analytes. Moreover, matrix effect was investigated using two methods the post-column infusion system and the method of spiked matrices after extraction. As a result, no significant matrix effect on the analysis was observed. The method showed good linearity (R ² coefficients greater than 0.996 in different water samples after SBSE-LD). Recoveries of the analytes were close to 90%, except for BP-3 (64%) and OC (76%) with relative standard deviation lower than 11%. Detection limits were between 0.6 and 3.3 ng L⁻¹ for all the analytes except for HMS (94 ng L⁻¹) and EHS (114 ng L⁻¹). This methodology was applied to measure UV filters in seawater, river water and wastewater in different sites of Liguria; BP-3 and OC were found in most of the considered samples at rather low concentration level.

     

高效液相色谱法同时测定防晒类化妆品中15种紫外线吸收剂

建立了一种反相高效液相色谱同时测定防晒类化妆品中15种紫外线吸收剂的分析方法。化妆水、乳液、膏霜和蜡质样品中首先加入四氢呋喃(含2 g/L氢氧化铵),涡旋、振荡、混匀(若蜡质样品仍分散不完全,可超声振荡加热至50 ℃),再加入80%(v/v)甲醇水溶液振荡混匀、超声提取、离心、过滤后,采用XTerra MS C₁₈柱分离,经水(含0.1%(v/v)甲酸)和甲醇(含0.1%(v/v)甲酸)梯度洗脱,以二极管阵列检测器检测,检测波长为280 nm和311 nm,外标法定量。实验中对不同基质类型样品的前处理条件(样品分散溶剂、萃取溶剂和萃取时间等)进行了重点优化。结果表明,15种紫外线吸收剂在各自的线性范围内呈良好的线性关系(r²≥0.9991),方法的定量限为1.2~5.1 μg/g,在低、中、高3个添加水平下的回收率为84.2%~100.7%,相对标准偏差(RSD)为0.9%~9.5%。该分析方法分离效果好、灵敏度高、定量准确,可用于防晒类化妆品的实际检测。     

Photostabilization of butyl methoxydibenzoylmethane (Avobenzone) and ethylhexyl methoxycinnamate by bis-ethylhexyloxyphenol methoxyphenyl triazine (Tinosorb S), a new UV broadband filter

It is now well documented that chronic UVA exposure induces damage to human skin. Therefore, modern sunscreens should not only provide protection from both UVB and UVA radiation but also maintain this protection during the entire period of exposure to the sun. UVA filters, however, are rare and not sufficiently photostable. We investigated the effect of the introduction of a new UV filter, bis-ethylhexyloxyphenol methoxyphenyl triazine (Tinosorb S), in oil in water sunscreen formulations on the photostability of butyl methoxydibenzoylmethane (Avobenzone [AVB]) after irradiation with an optically filtered Xenon arc source (UV irradiance adjusted at 1 mean effective dose [MED]/min). With spectrophotometrical methods to assess the sun protection factor (SPF) and UVA ratio and chromatographical methods to determine the amount of UV filters recovered after irradiation we showed that Tinosorb S prevented the photodegradation of AVB in a concentration-dependent way, leading to a sustained SPF and UVA ratio even after irradiation with doses of up to 30 MED. Since AVB was shown to destabilize ethylhexyl methoxycinnamate (EHM) we tested the effect of Tinosorb S in sunscreens containing this UV filter combination. Here too Tinosorb S showed photoprotective properties toward both UV filters. Thus, Tinosorb S can be used successfully to improve the photostability and efficiency of sunscreens containing AVB and EHM.     

The Photostabilizing Effect of Grape Seed Extract on Three Common Sunscreen Absorbers

The photostabilizing ability of grape seed extract on three common sunscreen absorbers, 2‐ethylhexyl‐p‐methoxycinnamate (EHMC), benzophenone‐3 (BP3) and tert‐butylmethoxy dibenzoylmethane (BMDBM), was investigated. Samples were exposed to simulated solar radiation and monitored by spectrophotometric and chromatographic methods. The chemical composition of the grape seed extract was determined by GC‐MS and HPLC‐MS, and the major secondary metabolites were found to be epicatechin and catechin. Exposure of the extract to UV radiation increased the UV absorption capacity of the extract. All sunscreens showed an improved photostability in the extract. The inherent photo‐instability of BMDBM when exposed to UV radiation was almost eliminated in the presence of grape seed extract. A mixture of all three sunscreens in the extract showed very high photostability and a red shift covering the entire UVB and UVA regions, thereby improving the broad‐spectrum protection. The incorporation of grape seed extract in sunscreen and other cosmetic formulations for topical application boosts photoprotection by stabilizing the UV filters and enhancing broad‐spectrum coverage. This in turn helps in reducing the amounts of absorbers and other additives incorporated in a sunscreen product and consequently lowers the risk of an unprecedented buildup of photoproducts whose toxicities are currently unknown.     

Determination of organic UV filters in water by stir bar sorptive extraction and direct analysis in real-time mass spectrometry

A screening method for analyzing environmental waters contaminated with UV filters using direct analysis in real-time mass spectrometry (DART-MS) was developed. To demonstrate the suitability of DART-MS a test set of seven organic UV filters, namely benzophenone-3 (BP-3), ethylhexyl dimethyl p-aminobenzoate (OD-PABA), 4-t-butyl-4′-methoxydibenzoylmethane (BM-DBM), homomethyl salicylate (HMS), 2-(ethylhexyl) salicylate (EHS), octocrylene (OC), and 4-methylbenzylidene camphor (4-MBC), was defined. In the first step, standard solutions of the analytes prepared in methanol were investigated in order to determine optimum parameters for the DART-MS. Because of the very low concentrations of UV filters expected in environmental water samples, a pre-concentration step using stir bar sorptive extraction was performed. DART-MS allows the direct, simple and rapid semi-quantitative analysis of the analytes enriched on the surface of the polydimethylsiloxane-coated stir bars. The optimized method provided calibration curves with correlation coefficients R > 0.959, repeatability from 5% (for 4-MBC) to 30% (for BM-DBM) relative standard deviation and limits of detection lower than 40 ng L⁻¹ for all analytes. Finally, real lake water samples from locations with typical leisure activities were analyzed. Results obtained with the developed DART-MS method were cross-checked by confirmatory analysis using thermodesorption gas chromatography mass spectrometry (TD-GC-MS). Thereby, it could be demonstrated that both analytical methods provide comparable concentrations for the UV filters in the lake water samples.     

Non-porous membrane-assisted liquid–liquid extraction of UV filter compounds from water samples

A method for the determination of nine UV filter compounds [benzophenone-3 (BP-3), isoamyl methoxycinnamate, 4-methylbenzylidene camphor, octocrylene (OC), butyl methoxydibenzoylmethane, ethylhexyl dimethyl p-aminobenzoate (OD-PABA), ethylhexyl methoxycinnamate (EHMC), ethylhexyl salicylate and homosalate] in water samples was developed and evaluated. The procedure includes non-porous membrane-assisted liquid–liquid extraction (MALLE) and LC–atmospheric pressure photoionisation (APPI)–MS/MS. Membrane bags made of different polymeric materials were examined to enable a fast and simple extraction of the target analytes. Among the polymeric materials tested, low- and high-density polyethylene membranes proved to be well suited to adsorb the analytes from water samples. Finally, 2 cm length tailor-made membrane bags were prepared from low-density polyethylene in order to accommodate 100 μL of propanol. The fully optimised protocol provides recoveries from 76% to 101% and limits of detection (LOD) between 0.4 ng L⁻¹ (OD-PABA) and 16 ng L⁻¹ (EHMC). The interday repeatability of the whole protocol was below 18%. The effective separation of matrix molecules was proved by only marginal matrix influence during the APPI-MS analysis since no ion suppression effects were observed. During the extraction step, the influence of the matrix was only significant when non-treated wastewater was analysed. The analysis of lake water indicated the presence of seven UV filter compounds included in this study at concentrations between 40 ng L⁻¹ (BP-3) and 4381 ng L⁻¹ (OC). In non-treated wastewater several UV filters were also detected at concentration levels as high as 5322 ng L⁻¹ (OC).     

RP–LC Simultaneous Determination of Aconitine, Solanine and Piperine in an Ayurvedic Medicine

By optimizing the extraction, separation and analytical conditions, a reliable, rapid, simple and accurate liquid chromatography method with UV detection was developed for the simultaneous quantitative determination of aconitine, solanine and piperine in an ayurvedic preparation prepared from Aconitum ferox, Solanum indicum, Piper nigrum and Piper longum. The separation of these alkaloids was achieved on an reversed phase C-18 column (250 mm × 4.6 mm ID, 5 μm particle size), with isocratic elution using a mixture of acetonitrile–potassium hydrogen phosphate buffer (10 mM, pH 7.5)–methanol (60:25:15, v/v) at a flow rate of 1 mL min^?1 with UV detection at 227 nm for aconitine and solanine while 343 nm for piperine. The calibration curves were linear with correlation coefficients of 0.9990, 0.9942, 0.9989 for solanine, piperine and aconitine, respectively. The % Relative standard deviation (%RSD) values were less than 2% in the concentration range of 10–100 μg mL^?1 for all the three alkaloids. Intra-day assay and inter-day assay precision of the analytes were less than 2%, and the average recovery rates obtained were in the range of 98–102% for all with %RSD below 2%. Quantitative analysis of the alkaloids in the laboratory and marketed formulations showed that the contents of the alkaloids varied significantly. This method can provide a scientific and technical platform to the product manufacturers for setting up a quality control standard as well as to the public for quality and safety assurance of the proprietary ayurvedic formulations.     

A new model using liposomes that allow to distinguish between absorption and oxidative properties of sunscreens

We have developed a new model using liposome-encapsulated fluorescent probes, aiming at assessing both the physical and the biological protection provided by filter molecules such as those incorporated in sunscreens. The fluorescent indicator Indo-1 or 2',7'-dichlorofluorescin (DCFH) was inside the liposomes, in the aqueous inner compartment, whereas the filter molecules octyl methoxycinnamate (OMC), benzophenone-3 (BP3) or avobenzone, widely used in sunscreens, were incorporated into liposome membranes. When liposome suspensions were placed in a fluorometer cuvette exposed to an incident UV beam, the decrease of Indo-1 fluorescence as a function of filter concentration was related to the extinction coefficient of the filters. On the other hand, when liposome suspensions were exposed to moderate UVB doses allowing Indo-1 photobleaching, the remaining intact Indo-1 was linked to the protection provided by filter-containing liposome membranes. Finally, when liposome-encapsulated DCFH was exposed to UVB, the degree of photo-oxidation of the fluorescent probe into 2',7'-dichlorofluorescein accounted for the photoprotection provided by the filter contained in liposome membranes. BP3 was more potent and slightly less efficient than the other two filters in preventing Indo-1 fluorescence; all three filters provided a similar concentration-dependent protection of Indo-1 photobleaching, whereas only OMC was able to prevent the photooxidation of DCFH. The liposome model presented here has the advantage of combining both physical and biological parameters to assess the photoprotection provided by filter molecules, and the lack of photoprotection by two sunscreen molecules having a good filter capacity highlights the need for such a biological parameter when talking about the safety of sunscreens.     

高效液相色谱法测定化妆品中11种二苯酮类紫外线吸收剂

建立了化妆品中11种二苯酮类紫外线吸收剂的高效液相色谱分析方法。采用四氢呋喃-甲醇-水或二氯甲烷-水体系提取化妆品中二苯酮类紫外线吸收剂,经离心(5000 r/min),上清液过0.22 μm滤膜后,进入高效液相色谱分析。采用C18色谱柱进行分离,以0.1% (体积分数)甲酸水溶液(含10 mmol/L乙酸铵)为流动相A,以0.1% (体积分数)甲酸甲醇为流动相B,梯度洗脱。方法加标回收率(n=7)为93.4%~103.8%,相对标准偏差为0.1%~4.2%,方法的检出限为4.0~30 μg/g,方法的定量限为15~100 μg/g。采用该方法对42种市售化妆品检测分析发现,有5种二苯酮类紫外线吸收剂被检出,其中防晒隔离液中二苯酮-3和香水中二苯酮-2的检出量分别为2785 μg/g和2106 μg/g。研究结果表明,所建立的方法具有良好的回收率、重现性和较高的灵敏度,可用于化妆品中多种二苯酮类紫外线吸收剂的分析。     

Determination of UV filters and antimicrobial agents in environmental water samples

Although there is increasing concern about residues from personal care products entering the aquatic environment and their potential to accumulate to levels that pose a health threat to humans and wildlife, we still know little about the extent and magnitude of their presence in the aquatic environment. In this study we describe a procedure for isolation, and subsequent determination, of compounds commonly added to personal care products. The compounds of interest include UV filters with the commercial name Eusolex (homosalate, 4-methylbenzylidenecamphor, benzophenone-3, octocrylene, butylmethoxydibenzoylmethane, ethylhexyl methoxycinnamate) and two common anti-microbial agents, clorophene and triclosan. Water samples were filtered, acidified, and extracted by use of solid-phase extraction. Extracted compounds were then derivatised before analysis by gas chromatography–mass spectroscopy. By use of our method we obtained limits of detection of 13–266 ng L⁻¹ for UV filters, and 10–186 ng L⁻¹ for triclosan and clorophene. Recoveries were 82–98% for deionised water and 50–98% for natural water (seawater, pool water, lake water, and river water). Samples collected in Slovenia included seventeen recreational waters (seawater, pool water, lake water, and river water; August 2004) and four wastewaters (January 2005). The most abundant UV filter was benzophenone-3 (11–400 ng L⁻¹). Of the two anti-microbial agents studied, trace amounts, only, of triclosan were present in the river Kolpa (68 ng L⁻¹) and in an hospital effluent (122 ng L⁻¹).     

气相色谱-质谱法测定水体中5种典型有机紫外防晒剂

建立了水体中5种典型有机紫外防晒剂甲氧基肉桂酸乙基己酯（ethylhexyl methoxycinnamate,EHMC）、二苯酮-3（benzophenone-3,BP-3）、4-甲基苄亚基樟脑（4-methylbenzylidene camphor,4-MBC）、奥克立林（octocrylene,OC）和胡莫柳酯（homosalate,HMS）的气相色谱-质谱检测方法。对HMS、BP-3衍生化条件进行了系统的优化。以100 μL双（三甲基硅烷基）三氟乙酰胺（N,O-bis（trimethylsilyl） trifluoroacetamide,BSTFA）为衍生化试剂,在100 ℃下反应100 min。水样固相萃取选用Oasis HLB萃取柱（0.5 g）,洗脱溶剂为乙酸乙酯-二氯甲烷（1：1,v/v）,水样pH 3~5。该方法对5种化合物的检出限范围为0.5~1.2 ng/L,定量限范围为1.4~4.0 ng/L。最佳实验条件下,加标水样回收率为87.85%~102.34%,相对标准偏差（n=3）均小于5%。该方法成功地应用于昆明市第一污水厂进出口水样中目标物质的分析。     

Development of a fully automated sequential injection solid-phase extraction procedure coupled to liquid chromatography to determine free 2-hydroxy-4-methoxybenzophenone and 2-hydroxy-4-methoxybenzophenone-5-sulphonic acid in human urine

2-Hydroxy-4-methoxybenzophenone and 2-hydroxy-4-methoxybenzophenone-5-sulphonic acid, commonly known as benzophenone-3 (BZ3) and benzophenone-4 (BZ4), respectively, are substances widely used as UV filters in cosmetic products in order to absorb UV radiation and protect human skin from direct exposure to the deleterious wavelengths of sunlight. As with other UV filters, there is evidence of their percutaneous absorption.This work describes an analytical method developed to determine trace levels of free BZ3 and BZ4 in human urine. The methodology is based on a solid-phase extraction (SPE) procedure for clean-up and pre-concentration, followed by the monitoring of the UV filters by liquid chromatography-ultraviolet spectrophotometry detection (LC-UV). In order to improve not only the sensitivity and selectivity, but also the precision of the method, the principle of sequential injection analysis was used to automate the SPE process and to transfer the eluates from the SPE to the LC system. The application of a six-channel valve as an interface for the switching arrangements successfully allowed the on-line connection of SPE sample processing with LC analysis.The SPE process for BZ3 and BZ4 was performed using octadecyl (C18) and diethylaminopropyl (DEA) modified silica microcolumns, respectively, in which the analytes were retained and eluted selectively. Due to the matrix effects, the determination was based on standard addition quantification and was fully validated. The relative standard deviations of the results were 13% and 6% for BZ3 and BZ4, respectively, whereas the limits of detection were 60 and 30 ng mL⁻¹, respectively. The method was satisfactorily applied to determine BZ3 and BZ4 in urine from volunteers that had applied a sunscreen cosmetic containing both UV filters.