Electrophilicity of 5-benzylidene-1,3-dimethylbarbituric and -thiobarbituric acids

The kinetics of reactions of acceptor-stabilized carbanions 2a-m with benzylidenebarbituric and -thiobarbituric acids 1a-e has been determined in a dimethyl sulfoxide solution at 20 degrees C. Second-order rate constants were employed to determine the electrophilicity parameters E of the benzylidenebarbituric and -thiobarbituric acids 1a-e according to the correlation equation log k(20 degrees C) = s(N + E). With E parameters in the range of -10.4 to -13.9, the electrophilicities of 1a-e are comparable to those of analogously substituted benzylidenemalononitriles.     

A kinetic study of S-nitrosothiol decomposition

Under anaerobic conditions S-nitrosothiols 1a-e undergo thermal decomposition by homolytic cleavage of the S-N bond; the reaction leads to nitric oxide and sulfanyl radicals formed in a reversible manner. The rate constants, k(t), have been determined at different temperatures from kinetic measurements performed in refluxing alkane solvents. The tertiary nitrosothiols 1c (k1(69 degrees C) = 13 x 10(-3) min(-1)) and 1d (k1(69 degrees C) = 91 x 10(-3) min(-1)) decomposed faster than the primary nitrosothiols 1a (k1(69 degrees C) = 3.0 x 10(-3) min(-1)) and 1b (k1(69 degrees C) = 6.5 x 10(-3) min(-1)). The activation energies (E# = 20.5-22.8 Kcal mol(-1)) have been calculated from the Arrhenius equation. Under aerobic conditions the decay of S-nitrosothiols 1a-e takes place by an autocatalytic chain-decomposition process catalyzed by N2O3. The latter is formed by reaction of dioxygen with endogenous and/or exogenous nitric oxide. The autocatalytic decomposition is strongly inhibited by removing the endogenous nitric oxide or by the presence of antioxidants, such as p-cresol, beta-styrene, and BHT. The rate of the chain reaction is independent of the RSNO concentration and decreases with increasing bulkiness of the alkyl group; this shows that steric effects are crucial in the propagation step.     

Aminolysis of Y-substituted phenyl X-substituted cinnamates and benzoates: effect of modification of the nonleaving group from benzoyl to cinnamoyl

A kinetic study is reported for reactions of Y-substituted phenyl X-substituted cinnamates (1a-e and 3a-g) and benzoates (2a-e and 4a-g) with a series of alicyclic secondary amines in 80 mol % H2O/20 mol % DMSO at 25.0 +/- 0.1 degrees C. Reactions of 2,4-dinitrophenyl X-substituted cinnamates (1a-e) and benzoates (2a-e) with amines result in linear Yukawa-Tsuno plots. The rho(X) values are much smaller for the reactions of 1a-e than for those of 2a-e. A distance effect and the nature of the reaction mechanism (i.e., a concerted mechanism for 1a-e) have been suggested to be responsible for the small rho(X) values. The Br?nsted-type plots for the reactions of 2,4-dinitrophenyl X-substituted cinnamates (1a, 1c, and 1e) with amines are curved with a decreasing betanuc value from 0.65 to 0.3-0.4. The reactions of Y-substituted phenyl cinnamates (3a-g) with morpholine also result in a curved Br?nsted plot, while the corresponding reactions of Y-substituted phenyl benzoates (4a-e) exhibit a linear Br?nsted plot. It has been concluded that the curved Br?nsted plots found for the reactions of the cinnamates (1a, 1c, 1e, and 3a-g) are not due to a change in the rate-determining step (RDS) but due to a normal Hammond effect for a concerted mechanism, that is, an earlier transition state (TS) for a more reactive amine or substrate.     

First synthesis and isolation of the E- and Z-isomers of some new Schiff bases. Reactions of 6-azido-5-formyl-2-pyridone with aromatic amines

Some novel Schiff bases have been prepared by reacting 6-azido-5-formyl-2-pyridone 1 with a series of aromatic amines 2a-f. 5-Arylaminomethylene-6-(E)-aryl-iminopyridones 3a-e were obtained by reaction of 1 with 2a-e at room temperature, whereas with 2f, the 6-azido-5-naphthalen-2-yl-iminomethylpyridone derivative 4 was formed. On the other hand, heating 1 with 2a-d at 140-150 degrees C yielded two sets of isomeric products, (E)-3a-d and (Z)-5a-d. Refluxing compounds (Z)-3a,c with hydroxyl-amine in methanol gave the corresponding hydroxyliminopyridones 8a,c. Heating of (E)-3a-d with excess POCl3 at reflux did not give the expected tricyclic compound 9, but rather the isomeric products (Z)-5a-d were obtained. The structures of all these products have been characterized using IR and 1H- and 13C-NMR spectroscopy.     

Effect of o-methyl group on rate, mechanism, and resonance contribution: aminolysis of Y-substituted phenyl X-substituted 2-methylbenzoates

Second-order rate constants have been determined spectrophotometrically for the reactions of 4-nitrophenyl X-substituted 2-methylbenzoates (2a-e) and Y-substituted phenyl 2-methylbenzoates (3a-e) with alicyclic secondary amines in 80 mol % H(2)O/20 mol % DMSO at 25.0 +/- 0.1 degrees C. The o-methyl group in the benzoyl moiety of 2a-e retards the reaction rate but does not influence the reaction mechanism. The Hammett plots for the reactions of 2a-e are nonlinear, while the corresponding Yukawa-Tsuno plots are linear with large r values (1.06-1.70). The linear Yukawa-Tsuno plots suggest that stabilization of the ground-state through resonance interaction between the electron donating substituent X and the carbonyl group is responsible for the nonlinear Hammett plots, while the large r values imply that the ground-state resonance interaction is significant. The reactions of 2a-e resulted in smaller rho(X) values but larger r values than the corresponding reactions of 4-nitrophenyl X-substituted benzoates (1a-e). The small rho(X) value for the reactions of 2a-e (e.g., rho(X) = 0.22) is suggested to be responsible for the large r value (e.g., r = 1.70). The reactions of 3a-e with piperidine are proposed to proceed in a stepwise manner with a change in the rate-determining step on the basis of the curved Br?nsted-type plot obtained. Microscopic rate constants associated with the reactions of 3a-e are also consistent with the proposed mechanism.     

Determination of the electrophilicity parameters of diethyl benzylidenemalonates in dimethyl sulfoxide: reference electrophiles for characterizing strong nucleophiles

The second-order rate constants of the reactions of nine substituted diethyl benzylidenemalonates 1 a-i with the carbanions 2 a-e have been determined spectrophotometrically in dimethyl sulfoxide (DMSO). Product studies show that the nucleophiles attack regioselectively at the electrophilic C==C double bond of the Michael acceptors to form the carbanionic adducts 4. The correlation log k(20 degrees C)=s(N+E) allows the determination of the electrophilicity parameters E for the electrophiles 1 a-i from the rate constants determined in this work and the previously published N and s parameters for the nucleophiles 2 a-e. The electrophilicities E for compounds 1 a-i cover a range of six units (-17.7>E>-23.8) and correlate excellently with Hammett's substituent constants sigma(p). The title compounds are roughly ten orders of magnitude less reactive than analogously substituted benzylidene Meldrum's acids, their cyclic analogues. Due to their low reactivities, compounds 1 a-i are suitable reference electrophiles for determining the reactivities of highly reactive nucleophiles, such as carbanions with 16相似文献   

Adding a new dimension to the investigation of platinum-mediated arene C-H activation reactions using 2D NMR exchange spectroscopy. Dynamics of Pt(II) phenyl/benzene site exchange

Protonation of (N-N)PtPh(2) (1; N-N = diimine ArN=CMe-CMe=NAr with Ar = 2,6-Me(2)C(6)H(3) (a), 2,4,6-Me(3)C(6)H(2) (b), 4-Br-2,6-Me(2)C(6)H(2) (c), 3,5-Me(2)C(6)H(3) (d), and 4-CF(3)C(6)H(4) (e)) in the presence of MeCN at ambient temperature generates (N-N)Pt(Ph)(NCMe)(+) (2). At -78 degrees C, protonation of 1a yielded (N-N)PtPh(2)(H)(NCMe)(+) (3a), which produced benzene and 2a at ca. -40 degrees C. Protonation of 1a-e in CD(2)Cl(2)/Et(2)O-d(10) furnished (N-N)Pt(C(6)H(5))(eta(2)-C(6)H(6))(+) (4a-e). The pi-benzene complexes 4a-c, sterically protected at Pt, eliminate benzene at ca. 0 degree C. The sterically less protected 4d-e lose benzene already at -30 degrees C. SST and 2D EXSY NMR demonstrate that phenyl and pi-benzene ligand protons undergo exchange with concomitant symmetrization of the diimine ligand, most likely via oxidative insertion of Pt into a C-H bond of coordinated benzene. The kinetics of the exchange processes for 4a-c were probed by quantitative EXSY spectroscopy, resulting in DeltaH() of 70-72 kJ mol(-1) and DeltaS of 37-48 J K(-1) mol(-1). A large, strongly temperature-dependent H/D kinetic isotope effect (9.7 at -34 degrees C; 6.9 at -19 degrees C) was measured for the dynamic behavior of 4a versus 4a-d(10), consistent with the proposed pi-benzene C-H bond cleavage. The fact that the pi-benzene complex 4a is thermally more robust in the absence of MeCN than is the Pt(IV) hydridodiphenyl complex 3a in the presence of MeCN agrees with the notion that arene elimination from Pt(IV) hydridoaryl complexes occurs via Pt(II) pi-arene intermediates that eliminate the hydrocarbon associatively, in this case, promoted by MeCN. Compounds 1a, 1b, 1d, 2a, and 2b have been crystallographically characterized.     

Synthesis of 3-ethoxycarbonyl-4-hydroxyquinoline N-oxides from the Baylis-Hillman adducts of o-nitrobenzaldehydes

[reaction: see text] The reaction of the Baylis-Hillman adducts la-e of o-nitrobenzaldehydes and trifluoroacetic acid at 60-70 degrees C gave 3-ethoxycarbonyl-4-hydroxyquinoline N-oxide derivatives 3a-e in good to moderate yields.     

Stereoselective C(2)-vinylation of 1-substituted imidazoles with 3-phenyl-2-propynenitrile

First examples of direct vinylation of 1-substituted imidazoles at the 2-position of the imidazole nucleus are described. 1-Substituted imidazoles 1a-e are C(2)-vinylated with 3-phenyl-2-propynenitrile (2) at room temperature without catalyst and solvent to afford 3-(1-organyl-1H-imidazol-2-yl)-3-phenyl-2-propenenitriles 3a-e, mainly (c.a. 95%) as (Z)-isomers, in 56-88% yield. The reaction is likely to involve the zwitterionic intermediates, which prototropically isomerizes to imidazole carbene and eventually undergoes the selective 3,2-shift of the functionalized vinyl substituent.     

Oxime-based salen-type tetradentate ligands with high stability against imine metathesis reaction

Although salen and its analogues are versatile chelate ligands in inorganic and organometallic chemistry, synthesis of unsymmetrical salen derivatives consisting of two different salicylideneimine moieties is difficult because of the C=N bond recombination. To develop stable analogues of salen-type ligands, we synthesized a series of new ligands salamo (=1,2-bis(salicylideneaminooxy)ethane) on the basis of O-alkyl oxime instead of the imine moiety. Eight salamo ligands 1a-h were prepared in 64-88% yields as colorless crystals from the corresponding salicylaldehydes 2a-h. The crystal structure of 1a-c suggests that the oxime-OH form is more predominant than the keto-NH form. The reaction of 2a-e with excess 1,2-bis(aminooxy)ethane gave monooximes 3a-e in 59-86%, which further reacted with a different salicylaldehyde to afford unsymmetrical salamo ligands 4-8 as stable crystals in 51-70%. No reaction took place when a mixture of salamo derivatives 1a and 1b was treated at 40 degrees C in H2O/MeCN (5:95). However, the metathesis reaction of salen derivatives 9a and 9b completed in 2 h to give a statistical mixture. Monooxime 3b was much more stable than monoimine 11 which is difficult to be isolated. These results indicate the extremely high stability of the salamo derivatives 1 and precursors 3.     

Modification of both the electrophilic center and substituents on the nonleaving group in pyridinolysis of O-4-nitrophenyl benzoate and thionobenzoates

A kinetic study is reported for reactions of 4-nitrophenyl benzoate (1c) and O-4-nitrophenyl X-substituted thionobenzoates (2a-e) with a series of pyridines in 80 mol % H2O/20 mol % dimethyl sulfoxide (DMSO) at 25.0 +/- 0.1 degrees C. O-4-Nitrophenyl thionobenzoate (2c) is more reactive than its oxygen analogue 1c toward all the pyridines studied. The Br?nsted-type plot is linear with beta(nuc)=1.06 for reactions of 1c but curved for the corresponding reactions of 2c with beta(nu)c decreasing from 1.38 to 0.38 as the pyridine basicity increases, indicating that the reaction mechanism is also influenced on changing the electrophilic center from C=O to C=S. The curvature center of the curved Br?nsted-type plots (defined as pK(a)(o)) occurs at pKa = 9.3 regardless of the electronic nature of the substituent X in the nonleaving group. The Hammett plot for reactions of 2a-e with 4-aminopyridine is nonlinear, i.e., the substrates having an electron-donating substituent exhibit negative deviations from the Hammett plot. However, the Yukawa-Tsuno plot for the same reactions exhibits good linear correlation, indicating that the negative deviations shown by these substrates arise from stabilization of the ground state through resonance interaction between the electron-donating substituent X and the C=S bond.     

Domino retro Diels-Alder/Diels-Alder reaction: an efficient protocol for the synthesis of highly functionalized bicyclo[2.2.2]octenones and bicyclo[2.2.2]octadienones

A novel and convenient approach, the domino retro Diels-Alder/Diels-Alder reaction sequence for highly stereo- and regioselective synthesis of various bicyclo[2.2.2]octenone and bicyclo[2.2.2]octadienone derivatives is presented. Thus, the masked o-benzoquinones (MOBs) 2a-e generated by the pyrolysis of the respective dimers 3a-e participated in this novel synthetic strategy with a variety of olefinic and acetylenic dienophiles at 220 degrees C to provide the title compounds in good to excellent yields.     

Ruthenium complexes of easily accessible tridentate ligands based on the 2-aryl-4,6-bis(2-pyridyl)-s-triazine motif: absorption spectra, luminescence properties, and redox behavior

A family of tridendate ligands 1 a-e, based on the 2-aryl-4,6-di(2-pyridyl)-s-triazine motif, was prepared along with their hetero- and homoleptic Ru(II) complexes 2 a-e ([Ru(tpy)(1 a-e)](2+); tpy=2,2':6',2"-terpyridine) and 3 a-e ([(Ru(1 a-e)(2)](2+)), respectively. The ligands and their complexes were characterized by (1)H NMR spectroscopy, ES-MS, and elemental analysis. Single-crystal X-ray analysis of 2 a and 2 e demonstrated that the triazine core is nearly coplanar with the non-coordinating ring, with dihedral angles of 1.2 and 18.6 degrees, respectively. The redox behavior and electronic absorption and luminescence properties (both at room temperature in liquid acetonitrile and at 77 K in butyronitrile rigid matrix) were investigated. Each species undergoes one oxidation process centered on the metal ion, and several (three for 2 a-e and four for 3 a-e) reduction processes centered on the ligand orbitals. All compounds exhibit intense absorption bands in the UV region, assigned to spin-allowed ligand-centered (LC) transitions, and moderately intense spin-allowed metal-to-ligand charge-transfer (MLCT) absorption bands in the visible region. The compounds exhibit relatively intense emissions, originating from triplet MLCT levels, both at 77 K and at room temperature. The incorporation of triazine rings and the near planarity of the noncoordinating ring increase the luminescence lifetimes of the complexes by lowering the energy of the (3)MLCT state and creating a large energy gap to the dd state.     

First examples of oxaphosphirane pentacarbonylchromium(0) and -molybdenum(0) complexes: synthesis, structures and reactions

Synthesis of the first oxaphosphirane chromium(0) and molybdenum(0) complexes of the type [{(R(1)PCH(R(2))-O}M(CO)(5)] (R(1) = C(5)Me(5)) (8a-e, 15a-e) and (R(1) = CH(SiMe(3))(2)) (9a-e, 16a-e) via reaction of dichloro(organo)- (1, 2, 10, 11) and chloro(organo)phosphane complexes (3,4,12) with lithium bases and aldehydes 7a-e is reported. Furthermore, bicyclic 1,3-oxaphospholane complexes 17 and 18 have been obtained via O-protonation of oxaphosphirane complexes 8a and 15a with HCl. All complexes were characterized by NMR, IR spectroscopic, mass spectrometric investigations and, in addition, single-crystal X-ray structures of complexes 8a-e, 9a,c, 15a,b,e, 16a-c, 17, 18 are presented and discussed.     

Controlling both ground- and excited-state thermal barriers to Bergman cyclization with alkyne termini substitution

The cross-coupling reaction of 2,3-dibromo-5,10,15,20-tetraphenylporphyrin with corresponding organostannanes in the presence of a Pd0 catalyst in THF at reflux temperature yields free base 2,3-dialkynylporphyrins 1a,c-e. The subsequent deprotection of trimethylsilyl group of 1a with TBAF in THF under aqueous conditions produces the 2,3-diethynyl-5,10,15,20-tetraphenylporphyrins 1b in 87% yield. Compounds 1a-d undergo zinc insertion upon treatment with Zn(OAc)2.2H2O in CHCl3/MeOH to give zinc(II) 2,3-dialkynyl-5,10,15,20-tetraphenylporphyrins (2a-d) in 70-92% yields. Thermal Bergman cyclization of 1a-e and 2a-d was studied in chlorobenzene and approximately 35-fold 1,4-cyclohexadiene at 120-210 degrees C. Compounds 1b and 2b with R = H react at lower temperature (120 degrees C) and produce cyclized products 3b and 4b in higher yields (65-70%) than their propyl, isopropyl, and phenyl analogues, with R = Ph being the most stable. Continuing in this trend, the -TMS derivatives 1a and 2a exhibit no reactivity even after heating at 190 degrees C in chlorobenzene/CHD for 24 h. Photolysis (at lambda >/= 395 nm) of 1b and 2b at 10 degrees C leads the formation of isolable picenoporphyrin products in 15 and 35% yields, respectively, in 72 h, whereas these compounds are stable in solution under same reaction conditions at 25 degrees C in the dark. Unlike thermolysis at 125 degrees C, which did not yield Bergman cyclized product for R = Ph, photolysis generated very small amounts of picenoporphyrin products (3c: 5%; 4c: 8% based on 1H NMR) as well as a mixture of reduced porphyrin products that were not separable. Thus, trends in the barrier to Bergman cyclization in the excited state exhibit the same trend as those observed in the ground state as a function of R-group. Finally, photolysis of 2b at 10 degrees C with lambda >/= 515 or 590 nm in benzene/iPrOH (4:1, 72 h) produces 4b in 15 and 6% isolated yields, indicating that conjugation of the enediyne unit into the porphyrin electronic transitions leads to sufficient distortion to generate photoproduct even with long wavelength excitation.     

Curved Hammett plot in alkaline hydrolysis of O-aryl thionobenzoates: change in rate-determining step versus ground-state stabilization

Second-order rate constants have been measured for alkaline hydrolysis of O-aryl thionobenzoates (X-C(6)H(4)-CS-OC(6)H(4)-Y) in 80 mol % H(2)O-20 mol % DMSO at 25.0 +/- 0.1 degrees C. The Hammett plot for the reaction of O-4-nitrophenyl X-substituted thionobenzoates (X-C(6)H(4)-CS-OC(6)H(4)-NO(2), 1a-e) exhibits a downward curvature. However, a possible traditional explanation in terms of a change in the rate-determining step (RDS) has been considered but rejected. The proposed explanation involves stabilization of the ground-state (GS) through-resonance interaction between the electron-donating substituent X and the thionocarbonyl functionality on the basis of the linear Yukawa-Tsuno plot obtained for the same reaction. The Br?nsted-type plot for the reaction of O-aryl thionobenzoates (C(6)H(5)-CS-OC(6)H(4)-Y, 2a-i) is linear but exhibits many scattered points with a small beta(lg) (-0.35). The Hammett plot for the same reaction shows rather poor correlation with sigma(-) constants but much better correlation with sigma(o) constants. The alkaline hydrolysis of O-aryl thionobenzoates (1a-e and 2a-i) has been proposed to proceed through an addition intermediate in which bond formation is the RDS.     

A study of the kinetics of La3+-promoted methanolysis of S-aryl methylphosphonothioates: possible methodology for decontamination of EA 2192, the toxic byproduct of VX hydrolysis

The kinetics of the La3+-catalyzed methanolysis of a series of S-aryl methylphosphonothioates (4a-e, phenyl substituents = 3,5-dichloro, 4-chloro, 4-fluoro, 4-H, 4-methoxy) were studied at 25 °C with s(s)pH control. The reaction involves saturation binding of the anionic substrates to dimeric La3+/methoxide catalysts formulated as La2(3+)(-OCH3)x, where x = 2-5 depending on the solution s(s)pH. Cleavage of the La3+-bound methylphosphonothioates is fast, ranging from 5 × 10(-3) s(-1) to 5.5 × 10-(5) s(-1) for substrates 4a-e at a s(s)pH of 8.4 and 1.6 × 10(-1) s(-1) to 4 × 10(-3) s(-1) at a s(s)pH of 11.7. The rate accelerations for the methanolysis of substrates 4a-e, relative to their background methoxide-promoted reactions, average 7 × 10(10) and 1.5 × 10(9), respectively, at s(s)pH's of 8.4 and 11.7. The catalytic system is predicted to cleave EA 2192 (S-2(N,N-di-iso-propylaminoethyl)methylphosphonothioate), a toxic byproduct of the hydrolysis of VX, with a t1/2 between 4 and 8 min at a s(s)pH of 8.4, and 27 min at a s(s)pH of 11.7.     

The synthesis, structure and ethene polymerisation catalysis of mono(salicylaldiminato) titanium and zirconium complexes

The silyl ethers 3-But-2-(OSiMe3)C6H3CH=NR (2a-e) have been prepared by deprotonation of the known iminophenols (1a-e) and treatment with SiClMe3 (a, R = C6H5; b, R = 2,6-Pri2C6H3; c, R = 2,4,6-Me3C6H2; d, R = 2-C6H5C6H4; e, R = C6F5). 2a-c react with TiCl4 in hydrocarbon solvents to give the binuclear complexes [Ti{3-But-2-(O)C6H3CH=N(R)}Cl(mu-Cl3)TiCl3] (3a-c). The pentafluorophenyl species 2e reacts with TiCl4 to give the known complex Ti{3-But-2-(O)C6H3CH=N(R)}2Cl2. The mononuclear five-coordinate complex, Ti{3-But-2-(O)C6H3CH=N(2,4,6-Me3C6H2)}Cl3 (4c), was isolated after repeated recrystallisation of 3c. Performing the dehalosilylation reaction in the presence of tetrahydrofuran yields the octahedral, mononuclear complexes Ti{3-But-2-(O)C6H3CH=N(R)}Cl3(THF) (5a-e). The reaction with ZrCl4(THF)2 proceeds similarly to give complexes Zr{3-But-2-(O)C6H3CH=N(R)}Cl3(THF) (6b-e). The crystal structures of 3b, 4c, 5a, 5c, 5e, 6b, 6d, 6e and the salicylaldehyde titanium complex Ti{3-But-2-(O)C6H3CH=O}Cl3(THF) (7) have been determined. Activation of complexes 5a-e and 6b-e with MAO in an ethene saturated toluene solution gives polyethylene with at best high activity depending on the imine substituent.     

Relationships of Acid and water content to proton transport in statistically sulfonated proton exchange membranes: variation of water content via control of relative humidity

An in-depth analysis for proton exchange membranes to examine the effects of acid concentration and effective proton mobility upon proton conductivity as well as their relationship to water content was carried out on two main-chain, statistically sulfonated polymers at 25 degrees C. These polymer systems consisted of poly(ethylenetetrafluoroethylene-graft-polystyrenesulfonic acid) (1) and sulfonated trifluorostyrene (BAM) membrane (2). Nafion (3) was used for comparison. Water content (as represented by Xv, the water volume fraction, where Xv = volume of water in hydrated PEM / volume of hydrated PEM), for each sample was varied by adjusting the relative humidity (RH) of the membrane environment from 50% to 98%. It was found that, at low RH (RH < 70%), the major factor determining proton conductivity is proton mobility. In order to remove the differences in acid strength for the membranes, proton mobility values at infinite dilution (Xv = 1.0) and 25 degrees C were calculated and found to be 2.6 +/- 0.2 x 10-3 (average of 1a-c), 1.6 +/- 0.3 x 10-3 (average of 2a-e), and 2.32 +/- 0.01 x 10-3 cm2 s-1 V-1 (3). These were then compared to the theoretical value for the mobility of a free proton at infinite dilution and to previously reported data. Possible differences in tortuosity and the juxtaposition of acid groups are proposed in order to account for the significant deviations of all samples from the theoretical value.     

Nickel-catalyzed

Oxabenzonorbornadienes 1 and 2 and azabenzonorbornadiene 3 undergo [2+2] cycloaddition with alkynes (PhC triple bond Ph, PhC triple bond CMe, PhC triple bond CCO2Et, PhC triple bond CCH(OEt)2, and HC triple bond C(CH2)4Me) in the presence of [Ni(PPh3)2Cl2], PPh3, and Zn powder in toluene to afford the corresponding exo-cyclobutene derivatives 4a-e, 5a-e, and 6 in fair to excellent yields. Under similar conditions. EtCO2C triple bond CCO2Et does not react with 1 in toluene to give the [2+2] cycloaddition product, but in acetonitrile, the catalytic [2+2] cycloaddition proceeds and cycloadduct 4 f is isolated in 83% yield. At high temperature, these cyclobutene derivatives readily undergo ring expansion to yield the corresponding 8-membered carbocyclic dienes. Thus, flash vacuum pyrolysis of 4a, 4d, 4f, 6, and 14 at 500 degrees C affords dienes 13a-d and 15 in 70-96% yields. This interesting ring expansion may be viewed as the insertion of an alkyne moiety into the carbon-carbon double bond of a cyclic olefin resulting in the enlargement of the ring by two carbons. Compound 13a is readily deoxygenated by TiCl4 and Zn in THF to give a cyclooctatetraene derivative 16 in 89% yield.