POSS星型聚合物对PMMA复合凝胶聚合物电解质性能的影响

为了提高凝胶聚合物电解质(GPE)的离子传输性,以低聚倍半硅氧烷(POSS)为核,臂结构为聚甲基丙烯酸甲酯(PMMA),臂聚合度不同的八臂星型聚合物(POSS-(PMMA3)8、POSS-(PMMA6)8、POSS-(PMMA9)8)为改性剂,分别与PMMA共混制备复合GPE,研究了POSS星型聚合物臂结构对复合GPE电性能影响的规律.结果表明,POSS星型聚合物的引入,使得复合GPE的电导率较纯PMMA基GPE均有显著提高,其中臂聚合度较小的POSS-(PMMA3)8复合GPE在室温的电导率最大,比纯PMMA基GPE提高了3.5倍.分析了该星型聚合物不同含量以及锂盐浓度等对复合凝胶聚合物电解质的影响,发现锂盐浓度在凝胶体系中为0.6 mol/L,该星型聚合物含量为聚合物基体15 wt%时,复合凝胶聚合物电解质电导率最大为2.73×10-4S/cm.研究了温度对复合凝胶聚合物电解质离子传输性能的影响规律,发现其离子传输规律符合Arrhenius方程.在此基础上,提出了该凝胶电解质体系的离子传输微观结构模型.     

聚合物固体电解质中的离子状态与导电机理的研究

制备得到了一种新颖的聚氨酯和丙烯酸酯复合梳形交联聚合物 (Combcross linkedpolymer) ,并以此聚合物为基体加入不同含量的高氯酸锂盐制得一系列聚合物固体电解质 ,其室温电导率可以达到 3 4× 10 - 5S·cm- 1 .通过Raman、DSC、SEM及电性能等研究了电解质中的盐浓度与离子存在状态及离子电导率之间的关系 .结果显示随着盐浓度的增加 ,聚合物固体电解质中离子对的比例和电导率都迅速增加 ,说明离子对 (由多个醚氧原子、阴离子和阳离子组成 )对体系导电起着积极的作用 .     

不同锂盐对超支化/梳状复合型聚合物电解质的性能影响研究

利用PVA侧链上的羟基的化学活性, 采用超支化聚胺-酯对改性纳米SiO₂和PVA接枝改性, 并加入不同锂盐,制备了SiO₂-g-HBPAE/PVA-g-HBPAE超支化/梳状复合型聚合物电解质, 利用SEM观察了纳米粒子在基体中的分散情况, 采用DSC、拉伸实验以及介电谱研究了锂盐种类及添加量对复合体系性能的影响. 结果表明, 超支化接枝改善了SiO₂和基体的界面相容性; 磺酸类锂盐在复合材料中表现出自增塑现象, 材料的玻璃化转变温度(T_g)大幅度下降; LiClO₄在基体中的离解能力强于LiCF₃SO₃和 LiN(SO₃CF₃)₂; 当LiCF₃SO₃添加量为20 %(by mass, 下文同)时, 聚合物电解质的室温电导率达到最大值2.58×10^-6 S•cm^-1.     

红外光谱研究PEO基离子液体聚合物电解质

以聚氧化乙烯(PEO)为聚合物基体, 双三氟甲基磺酸亚酰胺锂(LiTFSI)为锂盐, 加入不同量的离子液体(BMIMPF₆)为增塑剂, 制备离子液体聚合物电解质. 运用发射FTIR光谱技术实时监测所制备聚合物电解质的结构随温度的变化. 结合FTIR透射光谱\, SEM和XRD的研究结果分析了离子液体对离子电导率的影响, 并初步提出离子导电增强机制.     

基于聚乙二醇接枝丙烯酸树酯光固化电解质的制备及性能研究

聚氧化乙烯(PEO)(聚乙二醇(PEG))和丙烯酸树脂在聚合物基电解质中具有很好的应用,本文通过紫外光引发单/双官能度的聚乙二醇接枝丙烯酸树脂单体聚合构建了离子电导率高、易于封装,可避免电解质泄漏的准固态聚合物电解质.通过调控聚乙二醇二甲基丙烯酸酯(PEGDA)和甲氧基聚乙二醇单甲基丙烯酸酯(PEGMA) 2种单体的比例以及锂盐溶液的含量,成功制备出具有高离电导率的准固态聚合物电解质.采用傅里叶变换红外光谱仪(FTIR),电化学工作站对PEGMA/PEGDA基聚合物电解质进行表征,研究各组分比例对电解质的电化学性能影响.当PEGMA/PEGDA单体比例为75/25,锂盐溶液的占比为75%时,形成的薄膜状态电解质表现出1.96×10~(-3)S·cm~(-1)的高离子电导率,较原始配比提高了14倍.将制备的电解质应用于电致变色器件,在580个变色循环后,器件依然可以实现稳定快速的颜色切换,2种颜色变换时间均在3 s以内,本文中研究的聚醚接枝丙烯酸树酯基电解质材料在电致变色器件中有较好的应用前景.     

新型复合聚合物电解质离子导电行为的研究

PEG600和CH₂Cl₂通过Williamson缩聚反应,生成主链柔顺的PEG共聚物.¹H NMR测试表明其以[CH₂O(CH_2>CH₂O)¹³]为重复结构单元.与聚合物质量含量8%的气相SiO₂及适量的LiN(CF₃SO₂)2掺杂,制备一系列新型复合聚合物电解质.通过AC阻抗研究离子电导率,提出适合本体系的等效电路.该体系具有良好的成膜性能与热稳定性能,电导率比传统的PEO/盐体系高2～3个数量级.离子电导率随着温度的升高而增加,低温电导率增加较快,高温电导率增加较慢,呈非Arrhenius变化.在EO/Li=13～34:1(摩尔比)范围内,离子电导率随着盐浓度的变化出现两个峰值,低盐浓度的峰值较高.在303 K, EO/Li=28:1时,最大离子电导率接近10^-4 S/cm.     

基于聚乙二醇接枝丙烯酸树酯光固化电解质的制备及性能研究

聚氧化乙烯(PEO)(聚乙二醇(PEG))和丙烯酸树脂在聚合物基电解质中具有很好的应用,本文通过紫外光引发单/双官能度的聚乙二醇接枝丙烯酸树脂单体聚合构建了离子电导率高、易于封装,可避免电解质泄漏的准固态聚合物电解质.通过调控聚乙二醇二甲基丙烯酸酯(PEGDA)和甲氧基聚乙二醇单甲基丙烯酸酯(PEGMA)2种单体的比例以及锂盐溶液的含量,成功制备出具有高离电导率的准固态聚合物电解质.采用傅里叶变换红外光谱仪(FTIR),电化学工作站对PEGMA/PEGDA基聚合物电解质进行表征,研究各组分比例对电解质的电化学性能影响.当PEGMA/PEGDA单体比例为75/25,锂盐溶液的占比为75%时,形成的薄膜状态电解质表现出1.96×10^?3 S·cm^?1的高离子电导率,较原始配比提高了14倍.将制备的电解质应用于电致变色器件,在580个变色循环后,器件依然可以实现稳定快速的颜色切换,2种颜色变换时间均在3 s以内,本文中研究的聚醚接枝丙烯酸树酯基电解质材料在电致变色器件中有较好的应用前景.     

增塑聚合物电解质电化学性能

以GBL/EC复配体系为增塑剂, PVDF HFP和PMMA为聚合物基体制备胶态聚合物电解质. 研究聚合物电解质的离子传输特性和电化学稳定性. 实验表明,室温离子电导率达到 1. 2mS·cm-1, 电化学稳定窗口在 4. 5V以上. 以GBL/EC增塑聚合物电解质与表面经修饰的锂金属电极组成锂金属聚合物电池,其电极稳定性较好,充放电循环寿命得到很大的提高.     

原位复合法制备(PEO)8LiClO4/TiO2聚合物电解质的研究

以聚氧化乙烯/高氯酸锂复合物[(PEO)8LiClO4]为基体,通过钛酸丁酯的水解缩合反应在其中原位生成TiO2,制备了(PEO)8LiClO4/TiO2复合聚合物电解质,采用SEM、DSC和交流阻抗方法研究了聚合物电解质的形态、玻璃化转变温度(Tg)、结晶度(Xc)和离子导电性能.结果表明原位生成的TiO2在基体中分散均匀,加入TiO2后聚合物电解质体系的Tg和Xc均有所降低,而电导率明显提高,当TiO2添加量为ω=0.05时电导率达到最大值5.5×10-5S·cm-1(20℃).     

多功能梳状聚合物电解质的合成及其性能

以聚乙二醇单甲醚(PEGME)为侧链,马来酸酐/1-十八碳烯交替共聚物(PMAO)为骨架,制备出具有生物相容性的多功能梳状聚合物(PMAO-PEGME).该聚合物分别与 CH3OH 和LiOH 反应,制得梳状马来酸酐/1-十八碳烯交替共聚物多缩乙二醇酯(PMAO-PEGME-ME)和单离子聚合物电解质(即梳状马来酸酐/1-十八碳烯交替共聚物多缩乙二醇酯羧酸锂 PMAO-PEG-MELi),用FT-IR、1H-NMR、DSC、交流复阻抗谱等对得到的聚合物电解质进行了表征.结果表明:随着 LiClO4浓度的增加,PMAO-PEGME-ME/LiClO4 体系的电导率呈现先上升后下降的变化趋势,符合通常的聚合物电解质电导率与盐浓度的依赖关系.当每千克聚合物中含 1.5 mol Li-ClO4时,电导率达到最大值,室温下为 1.01×10-5S/cm.PMAO-PEGMELi 的室温电导率可达3.57×10-7S/cm.     

FT-IR studies on interactions among components in hexanoyl chitosan-based polymer electrolytes

Fourier transform infrared (FT-IR) spectroscopic studies have been undertaken to investigate the interactions among components in a system of hexanoyl chitosan-lithium trifluoromethanesulfonate (LiCF(3)SO(3))-diethyl carbonate (DEC)/ethylene carbonate (EC). LiCF(3)SO(3) interacts with the hexanoyl chitosan to form a hexanoyl chitosan-salt complex that results in the shifting of the N(COR)(2), CONHR and OCOR bands to lower wavenumbers. Interactions between EC and DEC with LiCF(3)SO(3) has been noted and discussed. Evidence of interaction between EC and DEC has been obtained experimentally. Studies on polymer-plasticizer spectra suggested that there is no interaction between the polymer host and plasticizers. Competition between plasticizer and polymer on associating with Li(+) ions was observed from the spectral data for gel polymer electrolytes. The obtained spectroscopic data has been correlated with the conductivity performance of hexanoyl chitosan-based polymer electrolytes.     

Polymer electrolytes based on room temperature ionic liquid: 2,3-dimethyl-1-octylimidazolium triflate

Room temperature ionic liquid (DMOImTf) based upon 2,3-dimethyl-1-octylimidazolium cation and trifluoromethanesulfonate or triflate (CF(3)SO(3))(-) anion has been synthesized and shows conductivity of 5.68 mS/cm and viscosity of 26.4 cP at 25 degrees C. Ion conducting polymer electrolytes based on polymers (poly(ethylene oxide) (PEO) and polyvinylidenefluoride-co-hexafluoropropylene (PVdF-HFP)) and ionic liquid (DMOImTf) were prepared in film form by the casting technique. The conductivity of polymer electrolytes containing 0.5 M LiCF(3)SO(3) in PEO:DMOImTf taken in equal weight ratio increases with the addition of propylene carbonate (PC) while its mechanical stability improved by dispersing nanosize fumed silica. However, polymer electrolytes containing PVdF-HFP and ionic liquid show a high value of conductivity (10(-4)-10(-3) S/cm) alongwith better mechanical stability.     

Determination of LiCF(3)SO(3) and gamma-LiAlO(2) in composite PEO-based polymer electrolytes by flame atomic absorption spectrometry

A simple and rapid method for the determination of LiCF(3)SO(3) and gamma-LiAlO(2) in composite PEO (poly(ethylene)oxide)-based polymer electrolytes, both in mixtures and thin films, is described. The method is based on the dissolution of LiCF(3)SO(3) in anhydrous ethanol at room temperature and subsequently dissolution of PEO in water for the separation of gamma-LiAlO(2). Determination of the lithium content in LiCF(3)SO(3) and gamma-LiAlO(2) was performed by flame atomic absorption spectrometry (FAAS). A fast and total recovery of the components is achieved, being within 99-100%. The analysis of variance (ANOVA) is used to estimate the contribution of variance of chemical analysis and sampling procedure to the total variance. The results from ANOVA show a high level of homogeneity of the samples.     

FTIR studies of PVC/PMMA blend based polymer electrolytes

The polymer electrolytes composing of the blend of polyvinyl chloride-polymethyl methacrylate (PVC/PMMA) with lithium triflate (LiCF3SO3) as salt, ethylene carbonate (EC) and dibutyl phthalate (DBP) as plasticizers and silica (SiO2) as the composite filler were prepared. FTIR studies confirm the complexation between PVC/PMMA blends. The CCl stretching mode at 834 cm-1 for pure PVC is shifted to 847 cm-1 in PVC-PMMA-LiCF3SO3 system. This suggests that there is interaction between Cl in PVC with Li+ ion from LiCF3SO3. The band due to OCH3 at 1150 cm-1 for PVC-PMMA blend is shifted to 1168 cm-1 in PVC-PMMA-LiCF3SO3 system. This shift is expected to be due to the interaction between Li+ ion and the oxygen atom in PMMA. The symmetric vibration band and the asymmetric vibration band of LiCF3SO3 at 1033 and 1256 cm-1 shifted to 1075 and 1286 cm-1 in the DBP-EC plasticized PVC-PMMA-LiCF3SO3 complexes. The interaction between Li+ ions and SiO2 will lead to an increase in the number of free plasticizers (which does not interact with Li+ ions). When the silica content increases from 2% to 5%, the intensity of the peak at 896 cm-1 (due to the ring breathing vibration of free EC) increases in PVC-PMMA-LiCF3SO3-DBP-EC system.     

Cation-anion interactions in 1-ethyl-3-methylimidazolium trifluoromethanesulfonate-based ionic liquid electrolytes

An important step in developing ionic-liquid-based electrolytes for lithium rechargeable batteries is obtaining a molecular-level understanding of the ionic interactions that occur in these systems. In this study, 1-ethyl-3-methylimidazolium trifluoromethansulfonate ([C2mim]CF3SO3) is complexed with LiCF3SO3, and the local structures of the CF3SO3- and [C2mim]+ ions are investigated with infrared and Raman spectroscopy. The isolation and subsequent refinement of a Li[C2mim](CF3SO3)2 crystal provides further insight into the structure of the [C2mim]CF3SO3-LiCF3SO3 solutions. Minor changes are observed in the infrared and Raman spectra of dilute [C2mim]CF3SO3-LiCF3SO3 solutions compared to pure [C2mim]CF3SO3. However, a suspension of very small Li[C2mim](CF3SO3)2 crystallites forms at a solution composition of [C2mim]CF3SO3:LiCF3SO3 = 10:1 (mole ratio), placing an upper limit on the solubility of LiCF3SO3. Essentially no changes are observed in the vibrational modes of the [C2mim]+ cations over the entire range of LiCF3SO3 compositions studied, suggesting that the addition of these compounds does not significantly perturb the local structure of the [C2mim]+ cations. The salt used in this study has a common anion with the ionic liquid; thus, the ion cloud surrounding the [C2mim]+ ions, which must be primarily composed of CF3SO3- anions, is not significantly altered with the addition of LiCF3SO3.     

Conductivity and FTIR studies on PEO-LiX [X: CF3SO3(-), SO4(2-)] polymer electrolytes

Polymer electrolytes based on poly(ethylene oxide)-lithium triflate (PEO-LiCF3SO3) and poly(ethylene oxide)-lithium sulphate (PEO-Li2S4) were prepared by using solution casting method. Measurements of conductivity and dielectric were carried out on these films as a function of frequency at various temperatures. It was observed that PEO-LiCF3SO3 polymer electrolytes have higher conductivity. The interaction between PEO and Li salts were studied by Fourier transform infrared (FTIR).     

FTIR spectra of plasticized grafted natural rubber-LiCF3SO3 electrolytes

Chemical modification of natural rubber (NR) has frequently been attempted to improve the performance in specific application. 30% poly(methyl metacrylate) (PMMA) grafted into NR (MG30) has been explored as a potential candidate for polymer electrolytes. The complexation effect of salt and plasticizer in polymer host electrolytes had been investigated using FTIR. The carbonyl stretch of MG30 locates at 1729 cm-1, with the addition of lithium trimethanesulfonate (LiCF3SO3) salt, new band evolves at lower frequency region at 1643-1645 cm-1. The nondegenerate vibrational mode of nus(SO3) of salted electrolytes appearing at 1031-1034 cm-1 comes from 'free' trimethanesulfonate anions and the 1040-1046 cm-1 absorption from the monodentate ion paired with triflates. These indicate MG30-salt interaction. When MG30 and ethylene carbonate (EC) formed film, the CH3 asymmetric bend of MG30 appearing at 1447cm-1 is shifted to 1449 cm-1 in the EC-polymer complex. The CO stretching at 1729 cm-1 also shifted to 1728 cm-1. Hence, the EC-MG30 system is complexed to each other. EC-LiCF3SO3 interactions are indicated by the shifting of CO bending band of EC from 718 cm-1 being shifted to 720 cm-1 in the complex. In Li+-EC interaction where the ring breathing region at 897 cm-1 in EC has shifted to 899 cm-1 in EC-salt spectrum. The band appearing at 1643-1645 cm-1 due to the coordination of Li+<--O-C is still under observation and new peaks at 1779 and 1809 cm-1 are responsible to the carbonyl stretches of EC in plasticized salt-polymer electrolytes.     

氧亚甲基连接的聚氧乙烯电解质

<正> 聚氧乙烯(PEO)和锂盐混合后具有聚合物电解质(Polymer electrolyte)的离子导电性,可用于制作高能量密度薄膜固体电池。存在的问题是因聚氧乙烯导电发生在非晶区,而未经改性的聚氧乙烯在室温下结晶度X_c>70％,必须在熔化时才具有良     

Influence of plasticizer type on the properties of polymer electrolytes based on chitosan

Polymer electrolytes were obtained by the casting technique from a solution containing chitosan, hydrochloric acid, and plasticizer such as glycerol, ethylene glycol, and sorbitol. The transparent membranes with good ionic conductivity properties were characterized by impedance and UV-vis spectroscopies, thermal analysis (DSC), and X-ray diffraction. The best ionic conductivity values of 9.5 x 10(-4) S cm(-1) at room temperature and 2.5 x 10(-3) S cm(-1) at 80 degrees C were obtained for the sample containing 59 wt% of glycerol and an equimolar amount of HCl with respect to NH2 groups in chitosan. The temperature dependence of the ionic conductivity exhibits an Arrhenius behavior with activation energy of 16.6 kJ mol(-1). The thermal analysis indicates that both glass transition temperature (-87 degrees C) and crystallinity are low for this electrolyte. The samples with 13 wt% of LiCF3SO3 showed that the ionic conductivity values of 2.2 x 10(-5) S cm(-1) at room temperature and 4 x 10(-4) S cm(-1) at 80 degrees C are predominantly amorphous and showed a low glass transition temperature of about -73 degrees C.     

Hydrogen bonding and the inductive effect in crystalline and solution phases of hexylamine:LiCF3SO3 and Dipropylamine:LiCF3SO3: application to branched poly(ethylenimine)

Raman and infrared spectroscopy were used to study the nature of hydrogen bonding and the cation inductive effect in solutions of LiCF(3)SO(3) dissolved in hexylamine, a primary amine, and dipropylamine, a secondary amine. Comparison of pure hexylamine and hexylamine dissolved in CCl(4) established that the Raman band maximum of the symmetric stretching mode, nu(s)(NH(2)), in pure hexylamine originates in molecules undergoing no hydrogen bonding interactions. The addition of LiCF(3)SO(3) to hexylamine or dipropylamine shifts the frequencies of the solvent NH stretching modes by two effects: the breaking of hydrogen bonds and the cation inductive effect. Comparison of the infrared and Raman spectra allows (to some degree) the separation of these two effects. During these studies, crystalline compounds of hexylamine:LiCF(3)SO(3) and dipropylamine:LiCF(3)SO(3) were discovered, and their structures were solved by single-crystal X-ray diffraction techniques. Vibrational spectra of these crystals and detailed structural knowledge of the cation-solvent interactions complement analogous spectroscopic studies of the solution phases. The cation-polymer and hydrogen bonding interactions of branched poly(ethylenimine) (BPEI) complexed with LiCF(3)SO(3) were modeled by the solutions of hexylamine and dipropylamine containing dissolved LiCF(3)SO(3). Specifically, lithium ion interactions with the primary and secondary amine groups in BPEI were modeled by the solution studies with hexylamine and dipropylamine, respectively. The analysis of the hexylamine system was particularly useful because the primary amine group of BPEI dominates the NH stretching region of the spectrum.