母乳中多种含卤持久性有机污染物的联合检测方法

建立了母乳中多种含卤持久性有机污染物(POPs)的联合检测方法,目标化合物主要包括六溴环十二烷(HBCDs)、多溴联苯醚(PBDEs)、多氯联苯(PCBs)和有机氯农药(OCPs)等.样品的前处理采用液液萃取、凝胶渗透色谱(GPC)净化和固相萃取(SPE)等技术,目标化合物经气相色谱-质谱联用仪(GC-MS)、液相色谱-三重四极杆串联质谱联用仪(LC-MS/MS)和气相色谱-三重四极杆串联质谱联用仪(GC-MS/MS)等进行检测.样品通过GPC除去脂肪,然后经SPE柱进一步净化并进行多组分分离,极大程度地减小了生物样品中复杂基质的干扰,适合样品量相对较小的人体样本中多种超痕量POPs的分析.应用灵敏度高、选择性更好的GC-MS/MS对样品中的PCBs和OCPs等进行分析,进一步降低基质的干扰.方法经过小牛血清加标实验验证,稳定可靠.POPs的加标回收率分别为88.7％～98.8％(PBDEs), 88.5％～92.5％(HBCDs), 67.9％～82.3％(PCBs)和81.7％～116.1％(OCPs),方法检出限分别为0.13～1.8 pg/mL(PBDEs), 0.31～1.2 pg/mL(HBCDs), 0.22～1.4 pg/mL(PCBs)和0.20～1.5 pg/mL(OCPs).采用本方法对潍坊地区20例母乳样品进行分析,结果显示,潍坊市母乳中HBCDs, PBDEs, PCBs、HCHs和DDTs的中值浓度分别为2.86, 7.76, 8.84、140和503 ng/g 脂重,此浓度水平与国内其它地区人群相当.     

固相萃取-GC-MS法测定水中四氯联苯

建立全自动固相萃取-气相色谱-质谱法检测水中微量四氯联苯的方法。采用全自动固相萃取装置配有C_(18)固相萃取盘富集浓缩水中四氯联苯后,用乙酸乙酯和二氯甲烷洗脱,以CD-5MS毛细管色谱柱分离,气相色谱质谱法测定水中四氯联苯的含量。对水样的洗脱剂、萃取流速、pH值、甲醇加入量等进行了优化试验,四氯联苯PCB52,PCB77,PCB81的质量浓度在5.00~50.0μg/L范围内与色谱峰面积呈良好的线性,检出限分别为0.002,0.003,0.002μg/L;加标回收率分别为90.9%,92.7%,95.4%;测定结果的相对标准偏差均小于3%(n=7)。该方法灵敏度高,适用于水样中痕量四氯联苯的监测。     

Mass spectrometric study of the bromination of technical mixtures of polychlorinated biphenyls

The products of bromination of polychlorinated biphenyls (PCBs) that constitute Trichlorobiphenyl and Sovol PCB technical mixtures were studied by gas chromatography–mass spectrometry. On the basis of mass spectrometric data, the reaction was shown to result in formation of a mixture of poly(bromochloro)biphenyls containing from one to five bromine atoms and from two to six chlorine atoms in different combinations. It was found that the content of monobromo derivatives increases while the content of di-, tri-, and tetrabromo PCB derivatives decreases when the chlorination degree of the initial PCBs increases.     

Determination of organochlorine compounds in human biological samples by GC-MS/MS

A study was undertaken to determine the extent of organochlorine pesticide (OP) and polychlorinated biphenyl (PCB) contamination in infant formula milk and in the human milk, fat and serum of women from an agricultural area in Southern Spain. A procedure is proposed that simultaneously detects trace levels of lindane, endosulfan-ether, vinclozolin, aldrin, endosulfan-lactone, endosulfan-alpha, 4,4'DDE, 2,4'DDT, endosulfan-beta, 4,4'DDT, kepone, endosulfate-sulfate, methoxychlor, mirex, 2,3,4 PCB, 2,2',4,5 PCB, 2,3,4,5 PCB and 2,2',3,3',6,6'PCB. After liquid-liquid or solid-liquid extraction, the extract of the sample was cleaned by high performance liquid chromatography (HPLC) and the fi rst eluted fraction was analysed by gas chromatography (GC) with mass spectrometry (MS) detector in tandem mode. To evaluate the validity of the method the following parameters were studied: linearity, detection limits, quantification limits, specificity, percentage recovery and precision. A study of the uncertainty associated with the analytical method was also carried out.     

Identification of low chlorinated biphenyls in human milk by gas chromatography--mass spectrometry.

Trichlorobiphenyl and tetrachlorobiphenyls in human milk were analysed by gas chromatography--mass spectrometry and mass fragmentography using silicone OV-1 and Apiezon L grease as stationary phases. Low-chlorinated biphenyls had been considered to be excreted rapidly from the body, but in this work quantities of tri- and tetrachlorobiphenyls amounting to approximately 30% of the total of polychlorinated biphenyls (PCBs) accumulated in the milk were identified. This result is important in relation to the quantification of PCBs and in studies of the mechanism of biological degradation.     

Multi-residue method for the determination of 57 Persistent Organic Pollutants in human milk and colostrum using a QuEChERS-based extraction procedure

Human breast milk represents the best choice for the nutrition of infants. However, in addition to containing beneficial nutrients and antibodies, it can also be considered the best indicator of infant exposure to contaminants. We developed a multi-residue method using a modified QuEChERS (quick, easy, cheap, effective, rugged, and safe) procedure and capillary gas chromatography–triple quadrupole mass spectrometry for the determination of 57 persistent organic pollutants, including 23 organochlorine pesticides, 18 polychlorinated biphenyl (PCB) congeners, and 16 polycyclic aromatic hydrocarbons in human milk and colostrum samples. We have used primary secondary amine in the clean-up step as it gave a more efficient separation of the analytes from fat and superior removal of the co-extracted substances compared with gel permeation chromatography. No significant matrix effect was observed for the tested pollutants, and therefore matrix-matched calibration was not necessary. The average recoveries from spiked samples were in the range of 74.8–113.0 %. The precision was satisfactory, with relative standard deviations below 16 %, while values of 0.1–0.4 μg L^?1 were established as the limit of quantification for all the target analytes (0.05 and 100 μg L^?1). The method was successfully applied to the analysis of 18 human colostrum and 23 mature milk samples. All the samples tested were positive for at least nine different residues, with some samples containing up to 24 contaminants. Remarkably, the contaminants hexachlorobenzene, p,p’-DDE, PCB 138, PCB 180, phenanthrene, fluoranthene, and pyrene were present in 100 % of the colostrum and mature milk samples analyzed.     

High resolution gas phase chromatography-mass spectrometry of polychlorinated biphenyl congener residues in samples of biologic origin

A study is performed on polychlorinated biphenyl (PCB) congener residues in samples of human blood and milk as well as in falcon and pigeon eggs. Most of the PCB congeners found in these biological samples were quantified by high-resolution gas chromatography (HRGC). A PCB technical mixture--namely, DP6 (Phenochlor)--was used for the calibration as its composition was previously determined by HRGC-mass spectrometry. The usefulness of such a congener analysis is outlined. It is the first time to the best of our knowledge that a Phenochlor mixture is used for standardization.     

PAH and PCB determination of the concentration gradient in moss Pleurozium schreberi near a highway,and seasonal variability at the background reference site

Moss (Pleurozium schreberi) was investigated as biomonitor of atmospheric polycyclic aromatic hydrocarbons (PAHs) and polychlorinated biphenyls (PCBs). Samples were collected at a distance of 10, 50 and 100 m from a highway and were seasonally collected in a forest stand near a regional background air pollution station situated approximately 30 km from the highway. The samples from the background area were dried using two different techniques in parallel, air-drying and freeze-drying. Simultaneous pressurised liquid extraction of PAHs and PCBs was performed, followed by purification using gel permeation chromatography of the crude extract. The concentration of the 15 most important Environmental Protection Agency (EPA) PAHs was determined by gas chromatography coupled with ion-trap mass spectrometry with a selected ion storage acquisition programme, and the PCB concentrations were determined using a mass spectrometer operated in tandem mass spectrometry (MS/MS) mode. Acceptable recoveries and quality parameters for PAHs and PCBs were achieved with the use of pressurised liquid extraction followed by gel permeation chromatography. The detection limit was <0.76 ng g^?1 for PAHs and <0.04 ng g^?1 for PCBs. Possible contamination of the moss samples by 3-ring PAHs and PCBs in the atmosphere was found during air drying. Increased PAH and PCB concentrations caused by car engine exhausts and by asphalt and oil evaporation were found near the highway. Generally, the PAH and PCB concentrations in moss decreased exponentially with distance from the highway. The organic compound concentrations close to the background station showed seasonal fluctuations corresponding to the fluctuations in the local air temperature and particle concentration.     

A simple and fast method for the simultaneous determination of polychlorinated biphenyls and polybrominated diphenyl ethers in small volumes of human serum

A fast extraction and clean-up method for the simultaneous determination of PCBs and PBDEs has been developed. The procedure consisted of a solid-phase extraction (SPE) of the analytes on an Oasis HLB cartridge and the subsequent on-line fat elimination by directly dropping the eluate from the SPE cartridge onto a second cartridge containing layers of activated neutral silica gel and sulphuric acid modified silica gel. Detection limits using a gas chromatography coupled with an ion trap detector in the tandem mass spectrometry mode were from 0.03 to 0.3 pg/microL for PCBs and from 0.07 to 1.3 pg/microL for PBDEs. Repeatability (lower than 11%) and reproducibility (lower than 17%), expressed as relative standard deviation (RSD, n=4), were satisfactory. The feasibility of the method developed for the determination of the target compounds was evaluated by participation in several rounds of interlaboratory exercises involving human serum with a wide range of PBDE and PCB concentrations. The method has been applied to the evaluation of PBDEs and PCBs in human serum samples of up to 1 mL.     

Development of human serum certified reference material for quantification of polychlorinated biphenyls

Human serum certified reference material (CRM), NMIJ CRM 7407-a, for the analysis of polychlorinated biphenyls (PCBs) was developed by the National Metrology Institute of Japan. A pool of commercially available human serum was used as a raw material of the CRM. This sample is in the form of a liquid comprising approximately 4 g stored in a cryogenic polypropylene vial. Homogeneity assessment was performed, and the material was homogeneous enough for PCB 118, PCB 138, PCB 153, and PCB 194: the relative uncertainties due to inhomogeneity were 2.5–10.5%. The results obtained from the stability assessment indicated that the target PCBs were stable: the relative uncertainties due to instability were 0–14.7%. The certification was carried out using two different types of GC columns for each target PCB to avoid interferences on GC separation; the certified values of the target PCBs (PCB 118, PCB 138, PCB 153, and PCB 194) were 9.7–129.8 ng/kg. This is the first frozen human serum CRM in which PCBs were determined by isotope dilution mass spectrometry.     

Miniaturised sample preparation of fatty foodstuffs for the determination of polychlorinated biphenyls

A miniaturised analytical method allowing the exhaustive extraction of environmentally relevant polychlorinated biphenyls (PCBs) from fatty foodstuffs and the purification of the extracts in a single step has been developed. After dispersion of the freeze dried sample on silica modified with 44% (w/w) of sulphuric acid, the mixture was packed in a glass column on top of a multilayer silica column used for removal of the lipids and biogenic co-extracted material. Using this arrangement, a complete sample preparation can be accomplished by two successive 10 min static extractions with hexane followed by a brief dynamic step to ensure purging of the sample and sorbents. The analytical method showed a satisfactory performance, with recoveries of the endogenous PCBs studied in the 81-134% range of those found using a more conventional off-line procedure, even though as small an amount of sample as 0.1 g was used. Detection limits by gas chromatography with micro-electron capture detection (GC-ECD) were in all cases lower than 0.3 ng/g sample (freeze dried basis) and the repeatability of the complete analytical procedure better than 14% (except for PCB 167). When combined with GC and ion trap detection in the tandem mass spectrometry mode, the miniaturised method has been proved to be a valuable alternative to the more expensive high resolution mass spectrometry for fast screening of PCBs 77, 126, and 169, even if these congeners were not isolated from the bulk of PCBs.     

自动样品前处理在乳品中二恶英和共平面多氯联苯同时测定中的应用

采用索氏提取及自动净化处理系统对乳品进行提取和净化,在高分辨气相色谱-高分辨双聚焦质谱仪(HRGC/HRMS)上进行定性和定量检测。在3种不同残留水平的奶粉样品中,17种多氯代二苯并-对二恶英和多氯代二苯并呋喃（PCDD/Fs）的测定结果与给定值具有很好的一致性,且所有具有保证值的二恶英同系物测定结果的相对标准偏差（RSD）均小于20%;12种共平面多氯联苯（PCBs）测定结果的RSD均在15%以内,内标物的回收率为44%～133%,完全符合国际标准方法的要求。母乳样品的国际考核结果表明本方法在不同实验室间具有良好的准确度和精密度。本方法定量准确可靠,适用于乳品中二恶英及共平面PCBs的同时检测。     

GC/MS determination of incidental PCBs in complex chlorinated-hydrocarbon process and waste streams

An electron-impact gas chromatography/mass spectrometry method using selected ion monitoring for the determination of incidental polychlorinated biphenyls in complex chlorinated-hydrocarbon samples is described. Ions in the molecular-ion cluster for each degree of chlorination (from monochloro- to decachlorobiphenyl) are monitored. Individual PCB isomers are used as standards. Validation data collected for several complex chlorinated-hydrocarbon matrices in three different laboratories had a relative precision (2sigma) of 20% with a limit of detection (3 x standard deviation of base-line noise) of 5 ppm for a single isomer at any degree of chlorination. The method has been used for the determination of incidental PCBs in more than 1000 samples from more than 30 different chlorinated-hydrocarbon sample matrices.     

Rapid Chromatography for the Determination of Polychlorinated Biphenyls by GC-MS in Environmental Monitoring

A method for determination of polychlorinated biphenyls (PCBs) in environmental and biological materials has been developed. This method includes rapid chromatography requiring less than 10 min using an HT-8 capillary column at 30 m × 0.25 mm i.d. Rapid chromatography was performed using a column temperature gradient from 80 to 310°C at a rate of 40°C/min. Low-resolution mass spectrometry in single ion monitoring mode of simultaneous detection of 12 target ions is suggested for detection of PCBs peaks. The method not only enabled us to reduce time of analysis but also to increase the efficiency of separating PCB peaks from interferences and to reduce levels of detection of analytes resulting in a minimized sample preparation stage. The last includes extraction of the PCBs using organic solvents, preliminary alkaline hydrolysis in the case of biological objects, and cleaning up the extracts on compact cartridges. The method was tested in monitoring studies for these contaminants in soils, sediments, snow cover, fish tissues, and seal blubber. Total PCBs and isomer congener groups of the same chlorination degree and seven indicator congeners (IUPAC No.'s 28, 52, 101, 118, 138, 153, and 180) are determined with a high degree of certainty. The PCB concentrations were in the range of 1–700 ng/g dry weight for environmental samples and 500–25000 ng/g lipids for biota. The method yields measurements of total PCBs and isomer groups with a precision no greater than 10% and no greater than 15% for the indicator congeners.     

Polychlorinated dibenzo-p-dioxins. Separation and identification of isomers by gas chromatography-mas spectrometry.

Attempts were made to synthesize all polychlorinated dibenzo-p-dioxin isomers containing six to eight chlorine atoms by micro-scale pyrolysis of different polychlorophenates. Eight of the ten possible hexachlorodibenzo-p-dioxins, the two hepta- and the octachlorodibenzo-p-dioxin were observed and separated by gas chromatography using glass capillary columns. Without actual isolation of these toxic materials, isomers were characterized by gas chromatography and mass spectrometry. Commercial chlorinate phenols were analyzed for the presence of these isomers. The major hexachlorodibenzo-p-dioxin observed in two commerical products was the unexpected 1,2,3,7,8,9-substituted isomer, which was not formed as the main dioxin component in any of the pyrolysis experiments. The same isomer was reported to be isolated from toxic fat and identified by X-ray crystallography.     

Mass spectrometric detection in narrow-bore (0.10 mm i.d.) capillary chromatography fast, sensitive and selective analysis of polychlorinated biphenyls

The combination of narrow-bore capillary gas chromatography with bench-top quadrupole mass spectrometric detection was evaluated for the determination of polychlorinated biphenyls (PCBs). The qualitative and quantitative performances of the system are illustrated by several analyses (PCB standards and human milk extracts). Capillary columns with different internal diameters (0.10, 0.18 and 0.22 mm, respectively) were compared for their ability to separate PCB congeners and the analysis time. Short run times (less than 7 min) were sufficient for complete separation of PCB congeners on a 0.10-mm internal diameter (I.D.) capillary column without any loss of resolution when compared with a 0.22 mm I.D. column. Good qualitative and quantitative data acquisition was possible with quadrupole mass spectrometer for run times of 8 min, but incomplete peak reading was observed when run times were reduced to 3-4 min. Selected ion monitoring and dwell times of 10 ms are necessary to obtain detection limits for individual PCB congeners as low as 0.4 pg microl(-1) for standard solutions and 0.2 ng g(-1) fat for milk extracts. By using cold splitless injection, relatively high volumes (1 microl) for narrow-bore capillaries could be injected without any peak distortion.     

Application of a novel large-volume injection method using a stomach-shaped inlet liner in capillary gas chromatographic trace analysis of dioxins in human milk and plasma.

A newly developed large-volume injection (LVI) technique that employs a unique stomach-shaped inlet liner (SSIL) inside of a programmable temperature vaporizer was used for the determination of trace amounts of dioxins in human milk and plasma. The initial temperature and the initial dwelling time of the inlet and the kind of solvent used were found to be critical in determining the analytical sensitivity of dioxins due to the loss of these relatively volatile compounds during solvent vaporization. Human milk and plasma were purified and fractionated by pre-packed multi-layered silica-gel chromatography and activated carbon silica-gel column chromatography. A 20-microL aliquot of the fraction collected from the chromatography with toluene was directly applied to the LVI system in high-resolution gas chromatography/high-resolution mass spectrometry. Excellent correlation (r > 0.97) between the values obtained by the LVI method using the SSIL device and those by the conventional regular-volume splitless injection method was obtained for PCDDs, PCDFs and non-ortho PCBs in human milk and plasma samples.     

Mineral oil certified reference materials for the determination of polychlorinated biphenyls from the National Metrology Institute of Japan (NMIJ)

Four mineral oil certified reference materials (CRMs), NMIJ CRM 7902-a, CRM 7903-a, CRM 7904-a, and CRM 7905-a, have been issued by the National Metrology Institute of Japan, which is part of the National Institute of Advanced Industrial Science and Technology (NMIJ/AIST), for the determination of polychlorinated biphenyls (PCBs). The raw materials for the CRMs were an insulation oil (CRM 7902-a and CRM 7903-a) and a fuel oil (CRM7904-a and CRM 7905-a). A solution of PCB3, PCB8, and technical PCB products, comprising four types of Kaneclor, was added to the oil matrices. The total PCB concentrations in the PCB-fortified oils (CRM 7902-a and CRM 7904-a) are approximately 6 mg kg⁻¹. In addition, the mineral oils which were not fortified with PCBs were also distributed as CRMs (CRM 7903-a and CRM 7905-a). Characterization of these CRMs was conducted by the NMIJ/AIST, where the mineral oils and the PCB solution were analyzed using multiple analytical methods such as dimethylsulfoxide extraction, normal-phase liquid chromatography, gel permeation chromatography, reversed-phase liquid chromatography, and chromatography using sulfoxide-bonded silica; and/or various capillary columns for gas chromatography, and two ionization modes for mass spectrometry. The target compounds in the mineral oils and those in the PCB solution were determined by one of the primary methods of measurement, isotope dilution–mass spectrometry (ID-MS). Certified values have been provided for 11 PCB congeners (PCB3, 8, 28, 52, 101, 118, 138, 153, 180, 194, and 206) in the CRMs. These CRMs have information values for PCB homologue concentrations determined by using a Japanese official method for determination of PCBs in wastes and densities determined with an oscillational density meter. Because oil samples having arbitrary PCB concentrations between respective property values of the PCB-fortified and nonfortified CRMs can be prepared by gravimetric mixing of the CRM pairs, these CRMs can be used for validation of PCB analyses using various instruments which have different sensitivities. Figure Preparation and certification processes of the mineral oil CRMs (example shown is polychlorinated biphenyls in insulation oil, high/low concentrations) Electronic supplementary material  The online version of this article (doi:) contains supplementary material, which is available to authorized users.     

A rapid screening method for routine congener-specific analysis of polychlorinated biphenyls in human serum by high-resolution gas chromatography with mass spectrometric detection

A screening method using gas chromatography/mass spectrometry in the single ion monitoring (SIM) mode for the routine congener-specific analysis of polychlorinated biphenyls (PCBs) in human serum has been developed and validated. A fast procedure incorporating both liquid-liquid and solid-phase extraction was used for clean up and enrichment. Interday and intraday precision and accuracy were assessed for the 12 congeners having dioxin-like activity and PCBs #180 and #170 by analyzing spiked samples on three subsequent days and using (13)C(12)-labelled analogues as internal standards. Furthermore, the relative errors for six non-dioxin-like congeners (PCBs #28, #52, #101, #138, #153 and #180) were measured by using certified reference materials, providing good accuracy at two different concentration levels. The limits of quantification and of detection were 0.5 and 0.2 micro g/L in serum for each congener, respectively. The method allows the chromatographic separation of at least 35 congeners and can therefore be applied to the routine monitoring of the general population for both dioxin-like and non-dioxin-like PCB congeners.     

Quantification and determination of enantiomeric ratios of chiral PCB 95, PCB 132, and PCB 149 in shark liver samples (C. coelolepis) from the Atlantic Ocean

Chiral 2,2′,3,5′,6-pentachlorobiphenyl (PCB 95), 2,2′,3,3′,4,6′-hexachlorobiphnyl (PCB 132) and 2,2′,3,4′,5′,6-hexachlorobiphenyl (PCB 149) were quantified in Atlantic Ocean shark liver samples (C. coelolepis) by gas chromatography-mass spectrometry (GC-MS) and their enantiomeric ratios were studied by multidimensional gas chromatography (MDGC) with an achiral-chiral column combination and detected by ECD and MS/SIM. The concentration range of the chiral PCBs was from 2 to 6 ng/g (fresh weight), which represents 2–6 % of the total PCB mean concentration. The investigations revealed a small enantiomeric bias of PCB 132 in most of the samples studied (ER = 0.75–0.89, ee = 6–14%), while PCB 95 and PCB 149 were present in racemic or almost racemic form.