ZnO/ZnS核-壳量子点的双光子吸收效应

利用飞秒激光Z-扫描与泵浦-探测技术,研究了室温下ZnO/ZnS与ZnO/ZnS/Ag核-壳胶体量子点的双光子吸收效应.研究发现:ZnO基核-壳量子点的本征双光子吸收系数比ZnO体材料增大了3个数量级;测量得到的660 nm处的ZnO/ZnS核-壳量子点双光子吸收截面约为4.3×10^-44 cm⁴·s·photon^-1,比相应的ZnS、ZnSe及 CdS量子点大2个数量级;当ZnO/ZnS核-壳量子点镶嵌了银纳米点时,非线性吸收有所增强.ZnO基复合纳米结构的双光子吸收增强可归因于量子限域与局域场效应.     

用非本征吸收区的透射系数研究CdSeS量子点玻璃的非线性系数

通过CdSeS量子点玻璃在非本征吸收区的透射系数,研究CdSeS量子点玻璃的非线性光学系数与量子点半径的关系。实验测量了嵌有不同尺寸CdSeS量子点玻璃的吸收光谱,在非本征吸收区量子点玻璃的透射系数随量子点半径的增大,先增大后减小;理论分析了半导体量子点玻璃非本征吸收区透射系数与非线性光学系数之间的关系;实验与理论相结合,建立了非本征吸收区透射系数与非线性光学系数之间的联系。研究分析了CdSeS量子点玻璃的非线性光学系数随量子点半径的变化,得到CdSeS量子点玻璃在非本征吸收区的非线性光学系数随量子点半径的增大,先减小后增大的结果。     

Enhanced Oxidation Stability of Quasi Core-Shell Alloyed CdSeS Quantum Dots Prepared Through Aqueous Microwave Synthesis Technique

Quasi core shell alloyed CdSeS quantum dots (QDs) have been prepared through a facile aqueous-phase route employing microwave irradiation technique. The optical spectroscopy and structure characterization evidenced the quasi core shell alloyed structures of CdSeS QDs. The X-ray diffraction patterns of the obtained CdSeS QDs displayed peak positions very close to those of bulk cubic CdS crystal structures and the result of X-ray photoelectron spectroscopy data re-confirmed the thick CdS shell on the CdSe core. The TEM images and HRTEM images of the CdSeS QDs ascertained the well-defined spherical particles and a relatively narrow size distribution. On the basis, the stability of the obtained QDs in an oxidative environment was also discussed using etching reaction by H₂O₂. The experiments result showed the as-prepared QDs present high tolerance towards H₂O₂, obviously superior to the commonly used CdTe QDs and core-shell CdTe/CdS QDs, which was attributed to the unique quasi core-shell CdSeS crystal structure and the small lattice mismatch between CdSe and CdS semiconductor materials. This assay provided insight to obtain high stable crystal structured semiconductor nanocrystals in the design and synthesis process.     

Large two-photon absorbance of chitosan–ZnS quantum dots nanocomposite film

ZnS semiconductor nanoparticles with average size of 3.4 nm were prepared in situ in chitosan film. TEM, UV–vis spectra and PL spectra show the ZnS nanoparticles in chitosan template were monodispersed and well passivated. The two-photon absorption coefficient (β) of the chitosan–ZnS quantum dots (QDs) nanocomposite film was obtained to be 2.29×10² cm/Gw from a standard Z-scan setup with femtosecond laser pusles at 790 nm wavelength. Results show the novel biomacromolecule/QDs nanocomposite film has large third-order optical nonlinear absorption, the mechanism responsible for which was discussed.     

Multilayer Au/TiO2Composite Films with Ultrafast Third-Order Nonlinear Optical Properties

We report on the ultrafast third-order optical nonlinearity in multilayer Au/TiO2 composite films fabricated on quartz substrates by pulsed laser deposition technique. The linear optical properties of the films are determined and optical absorption peaks due to surface plasmon resonance of Au particles are observed at about 590hm. The third-order optical nonlinearities of the films are investigated by z-scan method using a femtosecond laser （50 fs） at the wavelength of 800 nm. The sample showed fast nonlinear optical responses with nonlinear absorption coefficient and nonlinear refractive index being -3.66 × 10^-10 m/W and -2.95 × 10^-17 m^2/W, respectively. The results also show that the nonlinear optical effects increase with the increasing Au concentration in the composite films.     

Nonlinear optical properties in SrTiO3 thin films by pulsed laser deposition

Well-crystallized 250 nm-thick SrTiO₃ thin films on fused-quartz substrate were prepared by pulsed laser deposition. The band-gap of SrTiO₃ thin film by transmittance spectra is equal to 3.50 eV, larger than 3.22 eV for the bulk crystal. The nonlinear optical properties of the films were examined with picosecond pulses at 1.064 μm excitation. A large two-photon absorption (TPA) with absorption coefficient of 87.7 cm/GW was obtained, larger than 51.7 cm/GW for BaTiO₃ thin films. The nonlinear refractive index n₂ is equal to 5.7×10⁻¹⁰ esu with a negative sign, larger than 0.267×10⁻¹¹ esu for bulk SrTiO₃. The large TPA is attributed to intermediate energy levels introduced by the grain boundaries, and the optical limiting behaviors stemming from both TPA and negative nonlinear refraction were also discussed.     

Two-Photon Excited Diffraction Grating: Self-Diffraction and Nonlinear Optical Properties of Colloidal CdSe/ZnS QDs

Specific features have been revealed of nonlinear optical processes occurring when the total energy of two photons of a mode-locked Nd³⁺:YAG laser coincides with the energy of the main electron—hole (exciton) transition in colloidal CdSe/ZnS QDs and the effective self-diffraction of two laser beams arises on the induced diffraction grating.     

Complex formation of CdSe/ZnS/TOPO nanocrystal vs. molecular chaperone in aqueous solution by hydrophobic interaction

Feasibilities to stabilize CdSe/ZnS/trioctylphosphineoxide (TOPO) nanocrystals (quantum dots, QDs) in aqueous solutions with prefoldin macromolecules in their bioactive states are reported. Prefoldin is a jellyfish-shaped hexameric co-chaperone of the group II chaperonins. As a protein folding intermediate is captured within its central cavity, so CdSe/ZnS/TOPO QDs would also be included within this cavity. It is also found the QDs can be much more dispersed in aqueous solutions and suspended for certain period of time by adding trace amount of t-butanol in the buffer prior to the mixing of the QDs mother solution. While biochemical procedures are evaluated with ordinary fluorescence measurements, possible complex formations are also evaluated with TIRFM single-molecule detection techniques.     

Two and four photon absorption and nonlinear refraction in undoped,chromium doped and copper doped ZnS quantum dots

The ZnS quantum dots (QDs) with Cr and Cu doping were synthesized by chemical co-precipitation method. The nanostructures of the prepared undoped and doped ZnS QDs were characterized by UV–vis spectroscopy, Transmission electron microscopy (TEM) and X-ray diffraction (XRD). The sizes of QDs were found to be within 3–5 nm range. The nonlinear parameters viz. Two photon absorption coefficient (β₂), nonlinear refractive index (n₂), third order nonlinear susceptibility (χ³) at wavelength 532 nm and Four photon absorption coefficient (β₄) at wavelength 1064 nm have been calculated by Z-scan technique using nanosecond Nd:YAG laser in undoped, Cr doped and Cu doped ZnS QDs. Higher values of nonlinear parameters for doped ZnS infer that they are potential material for the development of photonics devices and sensor protection applications.     

Preparation of Highly Stable and Photoluminescent Cadmium-Free InP/GaP/ZnS Core/Shell Quantum Dots and Application to Quantitative Immunoassay

Indium phosphide (InP) quantum dots (QDs) are ideal substitutes for widely used cadmium-based QDs and have great application prospects in biological fields due to their environmentally benign properties and human safety. However, the synthesis of InP core/shell QDs with biocompatibility, high quantum yield (QY), uniform particle size, and high stability is still a challenging subject. Herein, high quality (QY up to 72%) thick shell InP/GaP/ZnS core/shell QDs (12.8 ± 1.4 nm) are synthesized using multiple injections of shell precursor and extension of shell growth time, with GaP serving as the intermediate layer and 1-octanethiol acting as the new S source. The thick shell InP/GaP/ZnS core/shell QDs still keep high QY and photostability after transfer into water. InP/GaP/ZnS core/shell QDs as fluorescence labels to establish QD-based fluorescence-linked immunosorbent assay (QD-FLISA) for quantitative detection of C-reactive protein (CRP), and a calibration curve is established between fluorescence intensity and CRP concentrations (range: 1–800 ng mL⁻¹, correlation coefficient: R² = 0.9992). The limit of detection is 2.9 ng mL⁻¹, which increases twofold compared to previously reported cadmium-free QD-based immunoassays. Thus, InP/GaP/ZnS core/shell QDs as a great promise fluorescence labeling material, provide a new route for cadmium-free sensitive and specific immunoassays in biomedical fields.     

ZnS/PVA nanocomposites for nonlinear optical applications

We have found a correlation between ZnS nanocomposite nonlinear optical features and technological processing using electrolytic method. In the earlier researches this factor was neglected. However, it may open a new stage for operation by photovoltaic features of the well known semiconductors within a wide range of magnitudes. The titled nanostructured zinc sulfide (ZnS) was synthesized by electrolytic method. The obtained ZnS nano-crystallites possessed nano-particles sizes varying within 1.6 nm…1.8 nm. The titled samples were analyzed by XRD, HR-TEM, STEM, and nonlinear optical methods such as photo-induced two-photon absorption (TPA) and second harmonic generation (SHG). For this reason the nano-powders were embedded into the photopolymer poly(vinyl) alcohol (PVA) matrices. Role of aggregation in the mentioned properties is discussed. Possible origin of the such correlations are discussed.     

Self-assembly of dandelion-like Fe3O4@C@BiOCl magnetic nanocomposites with excellent solar-driven photocatalytic properties

In comparison with conventional organic dyes, quantum dots (QDs) have unique optical and electronic properties, which provide QDs with a wide scope of prospective application in biology and biomedicine. However, the toxicity of QDs and the fluorescence intensity of labeled bacteria must precede their application in bacterial imaging and tracing in vivo. Here, we show that treatment with CaCl₂ significantly improved bacterial labeling efficiency of CdSe/ZnS QDs with the CdSe core size of ~3.1 nm (relative fluorescence unit (RFU) value and ratio of fluorescent E. coli) with rising CdSe/ZnS QDs concentration in a concentration-dependent manner. At 12.5 nmol/L CdSe/ZnS QDs concentration, labeled Escherichia coli (E. coli) DH5α appeared as short rod-shaped and luminescent with normal size, and the survival rate and ultrastructure did not change in comparison to the control. But the ratio of fluorescent bacteria and RFU were very low. However, the survival rate of transformed E. coli was significantly inhibited by high CdSe/ZnS QDs concentrations (≥25 nmol/L). Moreover, internalization of CdSe/ZnS QDs resulted in ultrastructure damage of transformed E. coli in a concentration-dependent manner (≥25 nmol/L). Therefore, CdSe/ZnS QDs may not suitable for tracing of bacteria in vivo. Moreover, our study also revealed that colony-forming capability assay and transmission electron microscopy could be used to comprehensively evaluate the toxicity of QDs on labeled bacteria. Our findings do provide a new direction toward the improvement and modification of QDs for use in imaging and tracing studies in vivo.     

Efficient two-photon absorption of CdSe-CdS/ZnS core-multishell quantum dots under the excitation of near-infrared femtosecond pulsed laser

We report that two-photon absorption (TPA) properties of semiconductor CdSe-core CdS/ZnS-multishell quantum dots (QDs) in toluene under excitation of femtosecond laser at 800 nm. The results show efficient TPA process and large TPA cross section of three types of size QDs, which is 1900, 5710, and 16060 GM (1 GM = 10⁻⁵⁰ cm⁴ s photon⁻¹), respectively. TPA cross section dramatically increases with increased core size, showing a strong size-dependence effect. Furthermore, two-photon excitation (TPE) fluorescence intensity not only depends on TPA capacity, but also relies on improved quantum yield resulting from passivation of QD surface by different coated monolayers (MLs). These facts in combination with the narrow fluorescence bandwidth make these QDs as promising probes for multicolor two-photon microscopy.     

Extremely Low Density InAs Quantum Dots with No Wetting Layer

Extremely low density InAs quantum dots （QDs） are grown by molecular beam droplet epitaxy. The gallium deposition amount is optimized to saturate exactly the excess arsenic atoms present on the GaAs substrate surface during growth, and low density InAs/GaAs QDs （4× 10^6 cm^-2） are formed by depositing 0.65 monolayers （MLs） of indium. This is much less than the critical deposition thickness （1.7 ML）, which is necessary to form InAs/GaAs QDs with the conventional Stranski-Krastanov growth mode. The narrow photoluminescence linewidth of about 24 meV is insensitive to cryostat temperatures from IO K to 250K. All measurements indicate that there is no wetting layer connecting the QDs.     

ZnS overlayer on in situ chemical bath deposited CdS quantum dot-assembled TiO2 films for quantum dot-sensitized solar cells

ZnS overlayers were deposited on the CdS quantum dot (QD)-assembled TiO₂ films, where the CdS QDs were grown on the TiO₂ by repeated cycles of the in situ chemical bath deposition (CBD). With increasing the CdS CBD cycles, the CdS QD-assembled TiO₂ films were transformed from the TiO₂ film partially covered by small CdS QDs (Type I) to that fully covered by large CdS QDs (Type II). The ZnS overlayers significantly improved the overall energy conversion efficiency of both Types I and II. The ZnS overlayers can act as the intermediate layer and energy barrier at the interfaces. However, the dominant effects of the ZnS overlayers were different for the Types I and II. For Type I, ZnS overlayer dominantly acted as the intermediate layer between the exposed TiO₂ surface and the electrolyte, leading to the suppressed recombination rate for the TiO₂/electrolyte and the significantly enhanced charge-collection efficiency. On the contrary, for Type II, it dominantly acted as the efficient energy barrier at the interface between the CdS QDs and the electrolyte, leading to the hindered recombination rate from the large CdS QDs to the electrolyte and thus enhanced electron injection efficiency.     

Synthesis and investigation of nonlinear optical properties of semiconductor ZnS nanoparticles

ZnS nanoparticles were prepared by a simple chemical method and using PVP (poly vinylpyrrolidone) as capping agent. The sample was characterized by UV-vis spectrophotometer, X-ray diffraction (XRD) and Z-scan technique. XRD pattern showed that the ZnS nanoparticles had zinc blende structure with an average size of about 2.18 nm. The value of band gap of these nanoparticles was measured to be 4.20 eV. The nonlinear optical properties of ZnS nanoparticles in aqueous solution were studied by Z-scan technique using CW He-Ne laser at 632.8 nm. The nonlinear absorption coefficient (β) was estimated to be as high as 3.2×10⁻³ cm/W and the nonlinear refractive index (n₂) was in order of 10⁻⁸ cm²/W. The sign of the nonlinear refractive index obtained negative that indicated this material exhibits self-defocusing optical nonlinearity.     

Energy transfer dynamics between Alq3 and CdTeS/ZnS core shell nanocrystals

The photoluminescence (PL) properties of the guest-host films, using CdTeS/ZnS core shell quantum dots (QDs) as the guest and organic small-molecule material Alq₃ as the host, are studied by steady-state and time-resolved PL spectroscopy. Both the relative intensity and the PL lifetime are intensively dependent on the weight ratio of Alq₃ and CdTeS/ZnS QDs. The detailed analysis provides clear evidence for a Förster energy transfer from Alq₃ host to QDs guest, based on the nonradiative resonant transfer mechanism. The results are relevant to the application of hybrid organic/inorganic systems to OLEDs.     

CdSe/ZnSe/ZnS多壳层结构量子点的制备与表征

展示了一种简捷的多壳层量子点合成路线。在含有过量Se源的CdSe体系中直接注入Zn源,"一步法"合成了CdSe/ZnSe量子点;进一步以CdSe/ZnSe为"核",表面外延生长ZnS壳层制备了核/壳/壳结构CdSe/ZnSe/ZnS量子点。相对于以往报道的多壳层结构量子点的制备方法,该方法通过减少壳层的生长步骤有效地简化了实验操作,缩短了实验周期,同时减少对原料的损耗。对量子点进行高温退火处理,能够大幅提高CdSe/ZnSe/ZnS量子点的发光量子产率。透射电镜、XRD以及光谱研究表明:所制备的量子点接近球形,核与壳层纳米晶均为闪锌矿结构,最终获得的CdSe/ZnSe/ZnS量子点的光致发光量子产率达到53％。为了实现量子点的表面生物功能化,通过巯基酸进行了表面配体交换修饰,使量子点表面具有水溶性的羧基功能团,并且能够维持较高的光致发光量子产率。     

Femtosecond Third-Order Optical Nonlinearity of Au：Bi203 Nanocomposite Films

Ultrafast third-order optical nonlinearities of the as-deposited and annealed Au：Bi2O3 nanocomposite films deposited by magnetron cosputtering are investigated by using femtosecond time-resolved optical Kerr effect （OKE） and pump probe techniques. The third-order optical nonlinear susceptibility is estimated to be 2.6Ф×10^- 10 esu and 1.8 × 10.9 esu at wavelength of 800nm, for the as-deposited and the annealed film, respectively. The OKE signal of the as-deposited film is nearly temporally symmetrical with a peak centred at zero delay time, which indicates the dominant contribution from intraband transition of conduction electrons. For the annealed film, the existence of a decay process in OKE signal implies the important contribution of hot electrons. These characteristics are in agreement with the hot electron dynamics observed in pump probe measurement.     

Facile synthesis of near-infrared CuInS<Subscript>2</Subscript>/ZnS quantum dots and glycol-chitosan coating for in vivo imaging

This study describes the synthesis method of water-soluble, low-toxicity, photostable highly luminescent probes based on I–III–VI₂ type semiconductor quantum dots (QDs) and the possibility of tumor targeting in living animals. Cd-free high-quality CuInS₂/ZnS core/shell QDs were synthesized, and their surfaces were reacted with mercaptoundecanoic acid for aqueous phase transfer followed by reaction with glycol-chitosan; lastly, Arg-Gly-Asp (RGD) integrin-binding peptide was covalently attached for in vivo tumor targeting. Dowtherm A, a highly viscous heat-transfer organic fluid, was used to control semiconductor crystal growth at high temperature (>230 °C) during organic synthesis. The structural and optical properties of the resulting CuInS₂/ZnS QDs were investigated. The average diameters of CuInS₂ and CuInS₂/ZnS QDs were 3.0 and 3.7 nm, respectively. Cell toxicity and in vivo tumor targetability in RR1022 cancer cell-xenografted mice were further evaluated using cRGDyk-tagged glycol-chitosan-coated CuInS₂/ZnS QDs. Glycol-chitosan-coated MUA-QDs displayed a Z-average diameter of 203.8 ± 7.67 nm in water by dynamic light scattering.

Open image in new window

Graphical abstract In vivo tumor targeting using cRGDyk-tagged glycol-chitosan-coated MUA-CuInS₂/ZnS QDs nanoparticles