Magnetic and structural studies of Cr2O5 and Cr3O8

The infrared spectra, indexed X-ray powder diffraction patterns, magnetic susceptibilities between 80 and 300 K, and electron paramagnetic resonance spectra at 80 and 300 K are reported for Cr₂O₅ and Cr₃O₈. The results indicate that both oxides are Cr³⁺/Cr⁶⁺ mixed-valence compounds which contain CrO₆ octahedra and CrO₄ tetrahedra in different ratios. The valence formula for Cr₂O₅ is Cr³⁺₂Cr⁶⁺₄O₁₅ and that of Cr₃O₈ is Cr³⁺₂Cr⁶⁺₇O₂₄. The X-ray powder data for Cr₂O₅ and Cr₃O₈ could be indexed on the basis of a monoclinic unit cell $\text{(a = 12.01(2), b = 8.52(1), c = 9.39(1)}\text{A}\text{?}\text{β = 92.0(1)°)}$ and an orthorhombic unit cell $\text{(a = 12.01(7), b = 36.60(7) and c = 3.82(1)}\text{A}\text{?}\text{)}$, respectively.     

The elastic constants of V2O3 in the insulating phase

The initial slopes of the acoustic phonon dispersion curves in (V_0.98Cr_0.02)₂O₃ have been measured at room temperature in several of the high symmetry directions by inelastic neutron scattering. From these data several sound velocities and four independent elastic constants have been determined. Although the Cr doped specimen is in the insulating phase and pure V₂O₃ is metallic, these results are in good agreement with recent data (1) obtained by ultrasonic measurements on pure V₂O₃.     

Electrical conduction in Fe2O3 and Cr2O3

The influence of some impurities on the conduction properties of Cr₂O₃ and Fe₂O₃ are examined and contrasted. A mechanism is proposed to account for the effect of Ti in Cr₂O₃.     

Enhancement of magnetic anisotropy in mechanically attrited Cr2O3 nanoparticles

Cr₂O₃ nanoparticles of sizes from 24 to 12 nm were synthesized by mechanical grinding. Magnetic hysteresis loops were observed in the temperature range 5-300 K. Zero-field magnetization measurements showed two peaks, at low temperature in the range 36-52 K and at high temperature in the range 255-290 K. They were found to shift to higher temperatures as the particle size was reduced. This was ascribed due to the enhancement of the effective anisotropy constant with a decrease in particle size. The exchange bias was found to increase as the particle size became smaller. This is believed to arise due to an increase in uncompensated spins as a result of large surface area created.     

Y2O3·Cr2O3复合氧化物热力学性质的研究

在1182—1386K温度范围内,用固体电解质氧浓差电池:Mo|Cr,Y₂O₃,Y₂O₃·Cr₂O₃|ZrO₂(+MgO)|Cr,Cr₂O₃|Mo测定了复合氧化物Y₂O₃·Cr₂O₃的热力学性质。对于反应Y_{2关键词：}     

EPR of Cr2O3 in the phase transition region

The temperature dependence of the Cr₂O₃ EPR spectra is obtained. The linewidth of the EPR is defined by the phonon's modulation of the exchange interactions at T >T_N + 4–5 K though at T_N < T < T_N + 4 K the critical broadening of the EPR in Cr₂O₃ is determined by fluctuation effects.     

Electrical conductivity and defect structure of Mg-doped Cr2O3

The electrical conductivity of Cr₂O₃ nominally doped with 2 mol% MgO has been studied by the four point a.c. technique as a function of the oxygen activity (O₂ + Ar, CO + CO₂ and H₂ + H₂O) in the temperature range 400–1200 °C. It is concluded that Cr₂O₃ doped with MgO is an extrinsic conductor and that the dissolved Mg-dopant is compensated by the formation of electron holes at near atmospheric oxygen pressures and by oxygen vacancies (or possibly interstitial chromium ions) at highly reduced oxygen activities (in CO + CO₂ and H₂ + H₂O gas mixtures). In H₂ + H₂O mixtures Mg-doped chromia also dissolves hydrogen as protons and significantly affects the defect structure and electrical conductivity. The defect structure of the oxide under various conditions is discussed.     

Spin structure and magnetic anisotropy of Cr5S6 and rhombohedral Cr2S3

The magnetic properties of single crystals of rhombohedral Cr₂S₃ have been measured. The data indicate a preferred orientation of the spins of the Cr atoms in a plane perpendicular to the trigonal axis. New neutron diffraction data for powdered samples which confirm this conclusion are presented.     

Intrinsic magnetic properties of In2O3 and transition metal-doped-In2O3

This paper reports on the influence of the sintering temperature and atmosphere and transition-metal doping on the magnetic properties of nanocrystalline and bulk In₂O₃. Undoped nanocrystalline In₂O₃ is diamagnetic whatever the sintering temperature and atmosphere. All single-phase transition-metal-doped In₂O₃ samples are paramagnetic, with a paramagnetic effective moment originating from weakly interacting transition metal ions. No trace of ferromagnetism has been detected even with samples sintered under argon, except extrinsic ferromagnetism for samples with magnetic dopant concentrations exceeding the solubility limit.     

Pressure dependence of elastic constants of orthorhombic Li2Ge7O15 above and below the ferroelectric transition

The pressure derivatives of the elastic constants c_ij of orthorhombic Li₂Ge₇O₁₅ have been determined at 293 K by the method of pressure-induced shifts of resonance frequencies of thick plates at ca. 15 MHz in the range between 0 and 1500 bar. Approaching the transition at ca. 630 bar, all P_ij = dc_ij/dp (i, j = 1, 2, 3; p pressure) develop strongly negative values. At higher pressures a similar behaviour with reversed sign is observed. The pressure derivatives of the pure “shear resistances” c₄₄, c₅₅, and c₆₆ depend only slightly on pressure even in the vicinity of the transition. The main interactions driving the transition are of the totally symmetric type. The values dK^?1/dp (K volume compressibility) deviate strongly from the quasi-invariant value of ca. 5 observed in almost all stable crystals (dK^?1/dp = ? 1750 at 620 bar and 1380 at 700 bar). The anomalous piezoelastic behaviour reflects the anomalous thermoelastic behaviour: negative P_ij in the low pressure (high temperature) phase correspond to positive T_ij = d log c_ij/dT (T temperature) and vice versa.     

Ultraviolet absorption spectrum of Cr2O3 from reflectivity measurements

Reflectivity measurements have been made on Cr₂O₃ single crystals in the energy range 1.2 eV to 20.0 eV. The results, which include three absorption peaks not previously reported, have been analysed both in terms of the crystal splitting of energy levels of the Cr³⁺ ion and of charge transfer.     

The pressure effect on the Curie temperature and exchange striction of Cr2S3 and Cr2Te3

The pressure derivative of T_c was found to be 1.0 deg/kbar for Cr₂S₃ and -1.78 deg/kbar for Cr₂Te₃. The volume exchange striction was found to be negative for Cr₂S₃ and positive for Cr₂Te₃. From these results, it was found that the exchange striction was dominant in the a-axis direction.     

Synthesis and electronic behaviors of TiO2/carbon clusters/Cr2O3 composite materials

Nano-structured TiO₂/carbon clusters/Cr₂O₃ composite material has been successfully obtained by the microwave treatment of a TiO(acac)/Cr(acac)₃/epoxy resin complex. The compositions of the composite materials were determined using ICP, elemental analysis and surface characterization by SEM-EDX, TEM and XRD. ESR spectral examinations suggest the possibility of an electron transfer in the process of TiO₂ → carbon clusters → Cr₂O₃ with an oxidation site at TiO₂ particles and a reduction site at Cr₂O₃ particles. The preliminary experimental results show that the calcined materials could decompose methylene blue under visible-light irradiation.     

The high quality ZnO growth on c-Al2O3 substrate with Cr2O3 buffer layer using plasma-assisted molecular beam epitaxy

High quality epitaxial ZnO films were grown on c-Al₂O₃ substrates with Cr₂O₃ buffer layer by plasma-assisted molecular beam epitaxy (P-MBE). The hexagonal crystalline Cr₂O₃ layer was formed by oxidation of the Cr-metal layer deposited on the c-Al₂O₃ substrate using oxygen plasma. The epitaxial relationship was determined to be ZnO//Cr₂O₃//Cr//Al₂O₃ and ZnO//Cr₂O₃//[0 0 1]Cr//Al₂O_3. The Cr₂O₃ buffer layer was very effective in improving the surface morphology and crystal quality of the ZnO films. The photoluminescence spectrum showed the strong near band-edge emissions with the weak deep-level emission, which implies high optical quality of the ZnO films grown on the Cr₂O₃ buffer.     

Exchange bias in thin-film (Co/Pt)3/Cr2O3 multilayers

We have fabricated exchange-biased Co/Pt layers ((0.3 nm/1.5 nm)×3) on (0 0 1)-oriented Cr₂O₃ thin films. The multilayered films showed extremely smooth surfaces and interfaces with root mean square roughness of ≈0.3 nm for 10 μm×10 μm area. The Cr₂O₃ films display sufficient insulation with a relative low leakage current (1.17×10⁻² A/cm² at 380 MV/m) at room temperature which allowed us to apply electric field as high as 77 MV/m. We find that the sign of the exchange bias and the shape of the hysteresis loops of the out-of-plane magnetized Co/Pt layers can be delicately controlled by adjusting the magnetic field cooling process through the Néel temperature of Cr₂O₃. No clear evidence of the effect of electric field and the electric field cooling was detected on the exchange bias for fields as high as 77 MV/m. We place the upper bound of the shift in exchange bias field due to electric field cooling to be 5 Oe at 250 K.     

Crystal field analysis of energy level structure of the Cr2O3 antiferromagnet

A detailed analysis of the energy level structure of the six-fold coordinated Cr³⁺ ion in the chromium oxide Cr₂O₃ is performed using the exchange charge model of the crystal field theory. Parameters of the crystal field acting on the Cr³⁺ optical electrons are calculated from the crystal structure data for the [CrO₆]⁹⁻ impurity center. The energy levels obtained are compared with the experimental absorption spectra for the considered crystal; a good agreement with experimental data is demonstrated. One possible explanation for the ultraviolet p₁ absorption band is proposed based on the results of crystal field calculations.     

Elastic constants of Cr3Si

Elastic constants of Cr₃Si have been measured on single crystals oriented along [110] and [100] as a function of temperature between 4.2 and 300 K. Their magnitudes at 4.2 K are in unit of 10¹¹ Nm^-2C₄₄ = 1.32C' = (C₁₁?C₁₂)/2 = 1.58B = 1.99 There is no peculiar behaviour as a function of temperature.     

Features of the local structural disorder in Li2O-CaF2-P2O5 glass-ceramics with Cr2O3 as nucleating agent

Li₂O-CaF₂-P₂O₅ glasses mixed with different concentrations of Cr₂O₃ (ranging from 0 to 1.0 mol%) were crystallized. The samples were characterized by X-ray diffraction, scanning electron microscopy, energy dispersive spectroscopy (EDS), differential thermal analysis and conventional spectroscopic techniques. The X-ray diffraction and scanning electron microscopic studies reveal the presence of lithium phosphate, calcium phosphate and chromium phosphate (complexes of Cr³⁺, Cr⁵⁺ and Cr⁶⁺ ions) crystal phases. The study on DTA suggests that the crystallization is predominantly due to the surface crystallization when the concentration of nucleating agent Cr₂O₃ is around 0.8 mol%. The IR and Raman spectral studies of these samples indicate that the sample crystallized with 0.8 mol% Cr₂O₃ is more compact and possesses high rigidity due to the presence of chromium ions largely in tetrahedral positions.     

Effect of rare earth (Pr2O3, Nd2O3, Sm2O3, Eu2O3, Gd2O3 and Er2O3 ) on the acoustic properties of glass belonging to bismuth-borate system

Bismuth-borate glasses doped with some rare earth ions were studied with respect to the density, molar volume and the elastic moduli, Poisson’s ratio, Debye temperature, microhardness, softening temperature, acoustic impedance, diffusion constant and latent heat of melting. Ultrasonic velocities were measured by the pulse echo overlap technique at a frequency of 10 MHz and at room temperature. From these velocities and density values, various elastic moduli were calculated. The correlation of elastic stiffness, the cross link density, and the fractal bond connectivity of these glasses are discussed. The derived experimental values of shear modulus, bulk modulus, Young’s modulus, and Poisson’s ratio for our glasses are compared with the theoretically calculated values in terms of the bond compression model and Makishima-Mackenize theory.     

Mode softening and the elastic constants of CeSn3

The transverse and longitudinal acoustic velocities have been measured in the [100] and [111] directions of CeSn₃ as a function of temperature for 4.2 ≤ T ≤ 290 K. The elastic constants c₄₄ and $\text{1}\text{2}\text{(c}{}_{11}\text{?c}{}_{12}\text{)}$ increase smoothly with decreasing temperature and become temperature independent below 10 K but the bulk modulus has a 2% decrease at 135 K which is indicative of an electronically driven mode softening.