A Copper‐Based Metal–Organic Framework Acts as a Bifunctional Catalyst for the Homocoupling of Arylboronic Acids and Epoxidation of Olefins

A copper(I)‐based metal–organic framework ({[Cu₂Br₂(pypz)]_n?nH₂O} (Cu—Br–MOF) [pypz=bis[3,5‐dimethyl‐4‐(4’‐pyridyl)pyrazol‐1‐yl] methane] has been synthesized by using an elongated and flexible bridging ligand. The structure analysis reveals that each pypz ligand acts as a tritopic ligand connected to two Cu₂Br₂ dimeric units, forming a one‐dimensional zig–zag chain, and these chains further connected by a Cu₂Br₂ unit, give a two‐dimensional framework on the bc‐plane. In the Cu₂Br₂ dimeric unit, the copper ions are four coordinated, thereby possessing a tetrahedral geometry; this proves to be an excellent heterogeneous catalyst for the aerobic homocoupling of arylboronic acids under mild reaction conditions. This method requires only 3 mol % of catalyst and it does not require any base or oxidant—compared to other conventional (Cu, Pd, Fe, and Au) catalysts—for the transformation of arylboronic acids in very good yields (98 %). The shape and size selectivity of the catalyst in the homocoupling was investigated. The use of the catalyst was further extended to the epoxidation of olefins. Moreover, the catalyst can be easily separated by simple filtration and reused efficiently up to 5 cycles without major loss of reactivity.     

Functionalization of superparamagnetic Fe3O4@SiO2 nanoparticles with a Cu(II) binuclear Schiff base complex as an efficient and reusable nanomagnetic catalyst for N‐arylation of α‐amino acids and nitrogen‐containing heterocycles with aryl halides

Fe₃O₄@SiO₂ nanoparticles was functionalized with a binuclear Schiff base Cu(II)‐complex (Fe₃O₄@SiO₂/Schiff base‐Cu(II) NPs) and used as an effective magnetic hetereogeneous nanocatalyst for the N‐arylation of α‐amino acids and nitrogen‐containig heterocycles. The catalyst, Fe₃O₄@SiO₂/Schiff base‐Cu(II) NPs, was characterized by Fourier transform infrared (FTIR) and ultraviolet‐visible (UV‐vis) analyses step by step. Size, morphology, and size distribution of the nanocatalyst were studied by transmission electron microscopy (TEM), scanning electron microscopy (SEM), and dynamic light scatterings (DLS) analyses, respectively. The structure of Fe₃O₄ nanoparticles was checked by X‐ray diffraction (XRD) technique. Furthermore, the magnetic properties of the nanocatalyst were investigated by vibrating sample magnetometer (VSM) analysis. Loading content as well as leaching amounts of copper supported by the catalyst was measured by inductive coupled plasma (ICP) analysis. Also, thermal studies of the nanocatalyst was studied by thermal gravimetric analysis (TGA) instrument. X‐ray photoelectron spectroscopy (XPS) analysis of the catalyst revealed that the copper sites are in +2 oxidation state. The Fe₃O₄@SiO₂/Schiff base‐Cu(II) complex was found to be an effective catalyst for C–N cross‐coupling reactions, which high to excellent yields were achieved for α‐amino acids as well as N‐hetereocyclic compounds. Easy recoverability of the catalyst by an external magnet, reusability up to eight runs without significant loss of activity, and its well stability during the reaction are among the other highlights of this catalyst.     

Air‐stable and recoverable catalyst for copper‐catalyzed controlled/living radical polymerization of styrene; In situ generation of Cu(I) species via electron transfer reaction

Copper‐catalyzed controlled/living radical polymerization (LRP) of styrene (St) was conducted using the silica gel‐supported CuCl₂/N,N,N′,N′,N″‐pentamethyldiethylenetriamine (SG‐CuCl₂/PMDETA) complex as catalyst at 110 °C in the presence of a definite amount of air. This novel approach is based on in situ generation and regeneration of Cu(I) via electron transfer reaction between phenols and Cu(II). Sodium phenoxide or p‐methoxyphenol was used as a reducing agent of Cu(II) complexes in LRP. The number–average molecular weight, M_n,GPC, increases linearly with monomer conversion and agrees well with the theoretical values up to 85% conversion The molecular weight distribution, M_w/M_n, decreases as the conversion increases and reaches values below 1.2. The catalyst was recovered in aerobic condition and reused in copper‐catalyzed LRP of St. For the second run, the number–average molecular weights increased with monomer conversion and the polydispersities decreased as the polymerization proceeded and reached to the value <1.3 at 81% conversion. The recycled catalyst retained 90% of its original activity in the subsequent polymerization. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 77–87, 2006     

Dendrimer‐encapsulated Cu(Π) nanoparticles immobilized on superparamagnetic Fe3O4@SiO2 nanoparticles as a novel recyclable catalyst for N‐arylation of nitrogen heterocycles and green synthesis of 5‐substituted 1H‐tetrazoles

In this study, dendrimer‐encapsulated Cu(Π) nanoparticles immobilized on superparamagnetic Fe₃O₄@SiO₂ nanoparticles were prepared via a multistep‐synthesis. Then, the synthesized composite was fully characterized by various techniques such as fourier transform infrared (FT‐IR) spectroscopy, X‐ray diffraction (XRD), dynamic light scattering (DLS), UV‐vis spectroscopy, energy dispersive X‐ray analysis (EDX), thermogravimetric analysis (TGA) and vibration sample magnetometer (VSM). From the information gained by FE‐SEM and TEM studies it can be inferred that the particles are mostly spherical in shape and have an average size of 50 nm. Also, the amount of Cu is determined to be 0.51 mmol/g in the catalyst by inductively coupled plasma (ICP) analyzer. This magnetic nano‐compound has been successfully applied as a highly efficient, magnetically recoverable and stable catalyst for N‐arylation of nitrogen heterocycles with aryl halides (I, Br) and arylboronic acids without using external ligands or additives. The catalyst was also employed in a one‐pot, three‐component reaction for the efficient and green synthesis of 5‐substituted 1H‐tetrazoles using various aldehydes, hydroxylamine hydrochloride and sodium azide in water. The magnetic catalyst can be easily separated by an external magnet bar and is recycled seven times without significant loss of its activity.     

Efficient Synthesis of Triarylamines Catalyzed by Copper(I) Diazabutadiene Complexes

Cuprous chloride was coordinated by diazabutadiene (DAB‐R) ligands to form Cu(I)‐(DAB‐R) complexes, most of which have a 1:1 ratio of Cu to DAB‐R as reported. In the case of a special DAB‐ⁱPP, N,N′‐bis(2,6‐diisopropylphenyl)‐1,4‐diaza‐1,3‐butadiene, an unexpected composition of complex was found with the formula Cu(I)Cl(DAB)₂. When employed as catalyst for triarylamine synthesis from the coupling of aryl halides with primary and secondary arylamines, the new Cu(I)‐(DAB‐ⁱPP) complex displayed high efficiency.     

New structures in the bi­pyridine–copper(II) nitrate–methanol system: [(bpy)2Cu(NO3)]NO3·CH3OH and [(bpy)2Cu(NO3)]NO3

Reaction of 2,2′‐bi­pyridine (bpy) and copper(II) nitrate in methanol results in two complexes, namely light‐blue bis(2,2′‐bi­pyridine)­nitrato­copper(II) nitrate methanol solvate, [Cu(NO₃)(C₁₀H₈N₂)₂]NO₃·CH₃OH, (I), which is unstable in air, and the product of its decomposition, catena‐poly­[[[bis(2,2′‐bi­pyridine)copper(II)]‐μ‐nitrato‐O:O′] nitrate], {[Cu(NO₃)(C₁₀H₈N₂)₂]NO₃}_n, (II). The crystal structures of both compounds were determined from one crystal at room temperature. Later, the structure of (I) was redetermined at low temperature. In (I) and (II), the Cu atom is coordinated by two bpy and one or two nitrate ions, respectively. The second nitrate ion in (I), along with the methanol solvent mol­ecule, is found in the outer coordination sphere, not bonded to Cu. The nitrate in (I) is chelating, while in (II), it bridges (bpy)₂Cu complexes, forming a one‐dimensional chain structure. The Cu cation in (II) lies on a twofold axis and the uncoordinated NO₃^? ion is located close to a twofold axis and is therefore disordered. Compound (I) converts into (II) upon loss of solvent.     

An efficient heterogeneous cross‐coupling of aryl iodides with diphenylphosphine catalyzed by copper (I) immobilized in MCM‐41

The heterogeneous cross‐coupling reaction of aryl iodides with diphenylphosphine was achieved in toluene at 115 °C in the presence of 10 mol% of phenanthroline‐functionalized MCM‐41‐supported copper (I) complex (Phen‐MCM‐41‐CuI) with Cs₂CO₃ as base, yielding various unsymmetric triarylphosphines in good to excellent yields. This protocol can tolerate a wide range of functional groups and does not need the use of expensive additives or harsh reaction conditions. This heterogeneous Cu (I) catalyst exhibited the same catalytic activity as homogeneous CuI/Phen system, and could easily be recovered by a simple filtration of the reaction solution and recycled up to seven times without significant loss of activity.     

A one‐pot method for synthesis of reduced graphene oxide‐supported Cu–Cu2O and catalytic application in tandem reaction of halides and sodium azide with terminal alkynes

Reduced graphene oxide (RGO)‐supported Cu–Cu₂O nanocomposite material (Cu‐Cu₂O@RGO) was prepared through a one‐pot reflux synthesis method. The morphology, crystal structure and composition of the prepared Cu‐Cu₂O@RGO were characterized using transmission electron microscopy, X‐ray diffraction, and X‐ray photoelectron, infrared and Raman spectroscopies. Cu‐Cu₂O@RGO as a heterogeneous catalyst was applied to tandem reactions of halides and sodium azide with terminal alkynes to synthesize effectively 1,4‐disubstituted 1,2,3‐triazoles. Moreover, the catalyst showed excellent recyclability performance with very little leaching of the metal. Compared with homogeneous catalysts, Cu‐Cu₂O@RGO as a green and efficient catalyst was recoverable, easy to separate and highly stable in the tandem method for the synthesis of 1,2,3‐triazole compounds.     

Effect of variation of [PMDETA]0/[Cu(I)Br]0 ratio on atom transfer radical polymerization of n‐butyl acrylate

A kinetic study was conducted to examine the effect of varying the ratio of ligand to transition metal in a Cu(I)Br/N,N,N′,N″,N″‐pentamethyldiethylenetriamine (PMDETA) catalyst system for atom transfer radical polymerization (ATRP) of n‐butyl acrylate (nBA) using methyl 2‐bromopropionate as the initiator. Experimental molecular weights were higher than theoretical when low molecular weight polymers were targeted at low ratios of [PMDETA]₀/[Cu(I)Br]₀ (< 1), indicating inefficient initiation/deactivation. A downward curvature in the plot of M_n versus conversion was observed at high monomer conversion when targeting high molecular weight polymers. This deviation became more significant when an excess of ligand was used, indicating a contribution of chain transfer to ligand. The maximum rate of polymerization was obtained at [PMDETA]₀/[Cu(I)Br]₀ ≈ 0.5 for bulk ATRP of nBA; however for polymerization in the presence of 10 vol% DMF, the maximum appeared at the ratio ≈ 1:1. Addition of acetone or DMF improved solubility of Cu(II) complex, which consequently improved the level of control over the polymerization at low ratios of [PMDETA]₀/[Cu(I)Br]₀, but also reduced the reaction rate. The polymerization rate increased with temperature, but at the expense of increased polydispersities. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 3285–3292, 2004     

Copper(I)-anilide complex [Na(phen)3][Cu(NPh2)2]: an intermediate in the copper-catalyzed N-arylation of N-phenylaniline

Complex [Na(phen)₃][Cu(NPh₂)₂] ( 2 ), containing a linear bis(N‐phenylanilide)copper(I) anion and a distorted octahedral tris(1,10‐phenanthroline)sodium counter cation, has been isolated from the catalytic C? N cross‐coupling reaction with the CuI/phen/tBuONa (phen=1,10‐phenanthroline) catalytic system. Complex 2 can react with 4‐iodotoluene to produce 4‐methyl‐N,N‐diphenylaniline ( 3 a ) with 70.6 % yield. In addition, 2 can work as an effective catalyst for C? N coupling under the same reaction conditions, thus indicating that 2 is the intermediate of the catalytic system. Both [Cu(NPh₂)₂]^? and [Cu(NPh₂)I]^? have been observed by in situ electron ionization mass spectrometry (ESI‐MS) under catalytic reaction conditions, thus confirming that they are intermediates in the reaction. A catalytic cycle has been proposed based on these observations. The molecular structure of 2 has been determined by single‐crystal X‐ray diffraction analysis.     

Copper(I)-mediated radical polymerization of methacrylates in aqueous solution

α-Methoxypolyethylene oxide methacrylate was polymerized by copper(I)-mediated living radical polymerization in aqueous solution to give polymers with controlled number-average molecular masses and narrow polydispersities. When equimolar quantities of initiator with respect to copper(I) bromide were used, the reaction was extremely fast with quantitative conversion achieved in less than 5 min at ambient temperature. However, the molecular weight distribution was broad, and control over the number-average molecular weight (M_n) growth was extremely poor; this is ascribed to an increase in termination because of the increased rate as a result of the coordination of water at the copper center. The complex formed between copper(I) bromide and N-(n-propyl)-2-pyridylmethanimine, bis[N-(n-propyl)-2-pyridylmethanimine]copper(I), was demonstrated to be stable in aqueous solution by ¹H NMR over 10 h at 25 °C. However, on increasing the temperature to 50 °C, decomposition occurred rapidly. Thus, polymerization temperatures were maintained at ambient temperature. When longer alkyl chains were utilized in the ligand, that is, pentyl and octyl, the complex acted as a surfactant leading to heterogeneous solutions. When the catalyst concentration was reduced by two orders of magnitude, the rate of polymerization was reduced with 100% conversion achieved after 60 min with the M_n of the final product being higher than that predicted and the polydispersity equal to 1.43. Copper(II) was added as an inhibitor to circumvent these problems. When 10% of Cu(I) was replaced by Cu(II) {[Cu(I)] + [Cu(II)]/[I] = 1/100}, the mass distribution showed a bimodal distribution, and the rate of polymerization decreased significantly. With a catalyst composition [Cu(I)]/[Cu(II)] = 0.5/0.5 {[Cu(I)] + [Cu(II)]}/[I] = 1/100, polymerization proceeded slowly with 80% conversion reached after 22 h. Thus, the concentration of Cu(I) was further reduced with [Cu(I)]/[Cu(II)] = 10/90, {[Cu(I)] + [Cu(II)]}/[I] = 1/100. The system then contained [Initiator]/[Cu(I)] = 1000/1 and [I]/[Cu(II)] = 1000/9. Under these conditions, the reaction reached 50% after 5 h with the polymer having both an M_n close to the theoretical value and a narrow polydispersity of PDi = 1.15. Optimum results were obtained by increasing the amount of catalyst. When a ratio of [Cu(I)]/[Cu(II)] = 10/90 with a ratio of [Cu]/[I] = 1/1, a conversion of 100% was achieved after less than 20 h, leading to a product having M_n = 8500 and PDi = 1.15. Decreasing the amount of Cu(II) relative to Cu(I) to [Cu(I)]/[Cu(II)] = 0.5/0.5 (maintaining the overall amount of copper) led to 100% conversion after 75 min: M_n = 9500, PDi = 1.10. Block copolymers have been demonstrated by sequential monomer addition with excellent control over M_n and PDi. © 2001 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 39: 1696–1707, 2001     

Electrochemical Characterization of Biochemically Active Cu(II) Mixed Ligand Complex with Histidine and Cysteine

Copper(II) complexes with cysteine and histidine, amino acids that coordinate copper(II) in human body, were investigated. Cu‐His and Cu‐Cys complexes were detected in pH range from 5.0 to 9.0 using voltammetric techniques. [CuHis₂] complex reduces by two‐electron reversible process at ≈−0.40 V, while [CuCys] complex by one‐electron quasireversible process at −0.6 V, revealing strong adsorption at the electrode surface. When both amino acids are present in the solution, new peak appeared at −0.5 V, which corresponded to the [CuHisCys] complex reduction. Formation and characterization of mixed ligand complex was also supported by UV‐Vis spectra recorded at fixed histidine and various cysteine concentrations. Formation of [CuHisCys] complex in the solution was detected and stability constant calculated to amount to log K Cu_HisCys=16.9±0.3. This study was the first attempt to characterize formation of Cu(II) mixed ligand complexation process with biochemically important amino acids in electron transport and oxygenation reactions in human body.     

Polyelectrolyte brushes as efficient platform for synthesis of Cu and Pt bimetallic nanocrystals onto TiO2 nanowires

A Cu–Pt nanoparticle catalyst supported on TiO₂ nanowires (NWs) was prepared through regenerative counterion exchange–reduction using polyelectrolyte brush as template. Cationic polydimethyl aminoethyl methacrylate brushes were grafted onto TiO₂ NWs. Cu–Pt nanocrystals were produced by anionic counterions CuCl₄^2? and PtCl₆^2? bound with the polymer brush through in situ reduction with NaBH₄ of high density and low polydispersity. The as‐prepared TiO₂ NWs/polymer brush/Cu–Pt was characterized by Fourier transform infrared spectroscopy (FT‐IR spectrometry), X‐ray photoelectron spectroscopy, transmission electron microscopy, and UV–Vis adsorption spectrometry analyses. Results showed that the highly dispersed Cu and Pt nanoparticles were present on the surface of the TiO₂ NWs/polymer brush. The resultant TiO₂ NWs/polymer brush/Cu–Pt exhibited extremely high catalytic activity and reduced p‐nitrophenol at room temperature. Copyright © 2017 John Wiley & Sons, Ltd.     

Atom transfer radical polymerization of N‐vinyl carbazole: Optimization to characterization

The homopolymerization of N‐vinylcarbazole was performed with atom transfer radical polymerization (ATRP) with Cu(I)/Cu(II)/2,2′‐bipyridine (bpy) as the catalyst system at 90 °C in toluene. N‐2‐Bromoethyl carbazole was used as the initiator, and the optimized ratio of Cu(I) to Cu(II) was found to be 1/0.3. The resulting homopolymer, poly(N‐vinylcarbazole) (PVK), was formed after a monomer conversion of 76% in 20 h. The molecular weight as well as the polydispersity index (PDI) showed a linear relation with the conversion, which showed control over the polymerization. A semilogarithmic plot of the monomer conversion with time was linear, indicating the presence of constant active species throughout the polymerization. The initiator efficiency and the effect of the variation of the initiator concentration on the polymerization were studied. The effects of the addition of CuBr₂, the variation of the catalyst concentration with respect to the initiator, and CuX (X = Br or Cl) on the kinetics of homopolymerization were determined. With Cu(0)/CuBr₂/bpy as the catalyst, faster polymerization was observed. For a chain‐extension experiments, PVK (number‐average molecular weight = 1900; PDI = 1.24) was used as a macroinitiator for the ATRP of methyl methacrylate, and this resulted in the formation of a block copolymer that gave a monomodal curve in gel permeation chromatography. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 1745–1757, 2006     

Design,Synthesis and Characterization of Coordination Polymer from [Cu(DMF)4(SCN)2] as a Precursor

This paper is focused on investigation of coordination polymers constructed by Cu(II) and rigid pyridyl ligands, such as 4,4′‐bipyridyl‐1,2,4‐triazole (Hpytz) and 1,10‐phenanthroline (phen) from a mononuclear precursor [Cu(DMF)₄(NCS)₂] ( 1 ). As expected, the complex was self‐assembled with phen to form a 1D double‐stranded chain of [Cu(phen)(µ‐SCN)₂]_∞ ( 2 ), with Hpytz to form 1D zigzag chain of [Cu₂(µ‐Hpytz)₂(NCS)₂(DMF)₂(µ‐SCN)₂]_∞ ( 3 ) in which thiocyanate anion linked the Cu‐µ‐Hpytz‐Cu chain into an infinite 2D network via weak Cu···S interaction. To treat 3 with the bridged anion dca, a novel 3D framework [Cu(µ‐Hpytz)(µ‐dca)(µ‐SCN)] _∞ ( 4 ) was obtained in which Cu‐µ‐Hpytz‐Cu chain is preserved and both thiocyanate anion and dicyanamide (dca) act as bridging ligands. In addition, complex 3 was applied as a metal catalyst in polymerization of MMA in aqueous solution at room temperature.     

Sodalite‐type Cu‐based Three‐dimensional Metal–Organic Framework for Efficient Oxygen Reduction Reaction

Inspired by copper‐based oxygen reduction biocatalysts, we have studied the electrocatalytic behavior of a Cu‐based MOF (Cu‐BTT) for oxygen reduction reaction (ORR) in alkaline medium. This catalyst reduces the oxygen at the onset (E_onset) and half‐wave potential (E^1/2) of 0. 940 V and 0.778 V, respectively. The high halfway potential supports the good activity of Cu‐BTT MOF. The high ORR catalytic activity can be interpreted by the presence of nitrogen‐rich ligand (tetrazole) and the generation of nascent copper(I) during the reaction. In addition to the excellent activity, Cu‐BTT MOF showed exceptional stability too, which was confirmed through chronoamperometry study, where current was unchanged up to 12 h. Further, the 4‐electrons transfer of ORR kinetics was confirmed by hydrodynamic voltammetry. The oxygen active center namely copper(I) generation during ORR has been understood by the reduction peak in cyclic voltammetry as well in the XPS analysis.     

SET‐LRP of vinyl chloride initiated with CHBr3 and catalyzed by Cu(0)‐wire/TREN in DMSO at 25 °C

The single‐electron transfer living radical polymerization (SET‐LRP) of vinyl chloride (VC) initiated with CHBr₃ in dimethylsulfoxide (DMSO) at 25 °C was investigated using Cu(0) powder and Cu(0) wire as the catalyst. It was determined that living kinetics and high conversion are achieved only through the proper calibration of the ratio between Cu(0) and TREN and the concentration of VC in DMSO. For both Cu(0) powder and Cu(0) wire, optimum conversion was achieved with higher levels of TREN than reported in earlier preliminary reports and under more dilute conditions. Using these conditions, 85+% conversion of VC could be achieved with Cu(0) powder and wire to produce white poly(vinyl chloride) (PVC) with M_n = 20,000 and M_w/M_n = 1.4–1.6 in 360 min. The use of Cu(0) wire provides the most effective catalytic system for the LRP of PVC allowing for simple removal and recycling of the catalyst. In the Cu(0) wire‐catalyzed SET‐LRP of VC, the consumption of Cu(0) was monitored as a function of conversion. From these studies, it is evident that the catalyst can be recycled extensively before significant exchange of Cu(0) into Cu(II)X₂ and change in catalyst surface area is observed. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 164–172, 2010     

Tubular bimetal oxysulfide CuMgOS catalyst for rapid reduction of heavy metals and organic dyes

Tubular bimetal oxysulfide CuMgOS catalyst was prepared using a feasible method at a low process temperature of 95°C. X‐ray diffractometry, X‐ray photoelectron spectrometry, field emission‐scanning electron microscopy, transmission electron microscopy, UV–Vis diffuse reflectance spectroscopy, photoluminescence emission spectrum, and nitrogen adsorption–desorption isotherms were used for CuMgOS characterizations. The CuMgOS reduction activities were investigated through the reduction of heavy metals of Cr (VI), Pb (II) and Hg (II) solutions, and the organic dyes of rhodamine‐B (RhB), methyl orange (MO) and methylene blue (MB) solutions under dark. The results showed that the CuMgOS prepared with an appropriate N₂H₄ amount for a suitable Cu (I)/Cu (II) ratio exhibited fast reduction activity without adding any reagents, with which the 100 mL Cr (VI), Pb (II) and Hg (II) solutions of 50 ppm were 100% reduced by 20 mg CuMgOS within 4 min, 6 min and 4 min, respectively. The 100 mL RhB, MO and MB solutions of 50 ppm were 100% reduced by 10 mg CuMgOS within 4 min, 5 min and 1 min, respectively, under the existence of NaBH₄. CuMgOS displayed excellent chemical stability for the re‐use tests on heavy metal ions and organic dyes. The excellent performance is attributed to CuMgOS bimetal oxysulfide catalyst with active surface reaction centers to interact with reactants, and the carrier hopping between Cu (I) and Cu (II).     

Cu‐Based Catalyst Resulting from a Cu,Zn,Al Hydrotalcite‐Like Compound: A Microstructural,Thermoanalytical, and In Situ XAS Study

A Cu‐based methanol synthesis catalyst was obtained from a phase pure Cu,Zn,Al hydrotalcite‐like precursor, which was prepared by co‐precipitation. This sample was intrinsically more active than a conventionally prepared Cu/ZnO/Al₂O₃ catalyst. Upon thermal decomposition in air, the [(Cu_0.5Zn_0.17Al_0.33)(OH)₂(CO₃)_0.17] ? mH₂O precursor is transferred into a carbonate‐modified, amorphous mixed oxide. The calcined catalyst can be described as well‐dispersed “CuO” within ZnAl₂O₄ still containing stabilizing carbonate with a strong interaction of Cu²⁺ ions with the Zn–Al matrix. The reduction of this material was carefully analyzed by complementary temperature‐programmed reduction (TPR) and near‐edge X‐ray absorption fine structure (NEXAFS) measurements. The results fully describe the reduction mechanism with a kinetic model that can be used to predict the oxidation state of Cu at given reduction conditions. The reaction proceeds in two steps through a kinetically stabilized Cu^I intermediate. With reduction, a nanostructured catalyst evolves with metallic Cu particles dispersed in a ZnAl₂O₄ spinel‐like matrix. Due to the strong interaction of Cu and the oxide matrix, the small Cu particles (7 nm) of this catalyst are partially embedded leading to lower absolute activity in comparison with a catalyst comprised of less‐embedded particles. Interestingly, the exposed Cu surface area exhibits a superior intrinsic activity, which is related to a positive effect of the interface contact of Cu and its surroundings.     

Electronic structure and properties of camphorimine Cu(I) coordination polymers

The first Cu(I) coordination polymer with an aromatic‐substituted camphorimine ligand [(CuCl)(μ‐Cl) (Cu(H₂NC₆H₄NC₁₀H₁₄O)]_n was obtained from reaction of CuCl with 3‐(4‐aminophenylimino)‐1,7,7‐trimethylbicyclo[2.2.1]heptan‐2‐one (H₂NC₆H₄NC₁₀H₁₄O). The electronic and the surface properties (studied by X‐ray photoelectron spectroscopy) are consistent with two distinct coordination environments for the copper(I) atoms—tetrahedral and linear—for the polymer family [(CuCl)(μ‐Cl){Cu(YNC₁₀H₁₄O)}]_n. DFT band calculations reveal that the highest energy bands are more localized on the copper(I) tetrahedral sites than on the copper(I) linear sites. The redox properties of [(CuCl)(μ‐Cl){Cu(YNC₁₀H₁₄O)}]_n [Y = NMe₂ ( 2b ), NH₂, and H₂NC₆H₄NC₁₀H₁₄O ( 2a )] studied by cyclic voltammetry show that the oxidation potentials of the two copper centers are in fact indistinguishable. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012