Polystyrene-supported triphenylarsines: useful ligands in palladium-catalyzed aryl halide homocoupling reactions and a catalyst for alkene epoxidation using hydrogen peroxide

The utility of both soluble (non-cross-linked) and insoluble (cross-linked) polystyrene-supported triphenylarsine reagents were examined. These reagents were prepared by standard radical polymerization methodology and used in palladium-catalyzed homocoupling reactions of aryl halides. The insoluble reagent was also used as a catalyst precursor in heterogeneous alkene epoxidation reactions in which aqueous hydrogen peroxide was the stoichiometric oxidant. For the aryl halide homocoupling reactions, both reagents worked well and afforded similar results. Unhindered aryl iodides afforded the best yields in the shortest reaction times compared to aryl bromides. The epoxidation reactions of unfunctionalized alkenes were not very efficient. This was probably due to the hydrophobicity of the polystyrene matrix, which did not swell in the reaction medium. Thus, since a microporous, gel-type polystyrene matrix was used, the majority of the arsine groups were inaccessible to the reaction components and therefore incapable of participating in catalysis.     

Interaction of apo cytochrome c with sulfonated polystyrene nanoparticles

Stable nanoparticle dispersion in aqueous solutions was obtained with partially sulfonated polystyrene. The hydrophobic association of the backbone chains and phenyl groups is balanced by the electrostatic repulsion of the sulfonate groups on the particle surface. The size distribution of the sulfonated polystyrene particles in relation to concentration, degree of sulfonation and chain length, and pH was characterized by dynamic laser light-scattering. The structure and morphology of the particles were characterized with fluorescence and atom force microscopy. Highly sulfonated polystyrene particles can form large complex particles with positively charged protein, apo cytochrome c. Dynamic laser light-scattering and atom force microscopy studies show that the size and distribution of the complex particles depend on the relative amount of apo cytochrome c and sulfonated polystyrene. When sulfonated polystyrene is in excess, apo cytochrome c interacts with sulfonated polystyrene particles forming stable complexes and excessive sulfonated polystyrene particles bind to the periphery of the complexes preventing them from further aggregation. When apo cytochrome c is in excess, apo cytochrome c links the complexes forming much larger particles. Fluorescence study demonstrates that the hydrophobicity/hydrophility of the complex particles is relative to the ratio of apo cytochrome c and sulfonated polystyrene, degree of sulfonation, and pH. Apo cytochrome c not only can neutralize the negative charges on the surface of sulfonated polystyrene particles, but may also insert into the cores disrupting the original structure of sulfonated polystyrene particles.     

Preparation of raspberry-like silica microcapsules via sulfonated polystyrene template and aniline medium assembly method

Raspberry-like composite particles and microcapsules were prepared with anionic sulfonated polystyrene (PSS) particles as templates and cationic aniline monomer as assembly medium. With the help of the sulfonated microgel shells, aniline and silica particles could not only adsorbed onto template surfaces but also go inward shells and finally form microcapsules with varied silica shell thickness. The sulfonation extent of PSS particles first climbed up and then decreased with sulfonation time due to the competition of sulfonation reaction and PSS chain detachment. The silica content in composite particles and shell thickness of microcapsules followed similar trend with sulfonation extent. The choice of aniline as assembly medium was checked by comparing with methyl methacrylate and [2-(methacryloyloxy) ethyl] trimethylammonium chloride, and it was found that the cationic and water-insoluble properties of aniline are both important for the composite efficiency.     

Blends from redox active liquid crystal ionomers and amorphous ionomers

Abstract

Biphasic blends (mixtures) of liquid crystal ionomers (prepared from ferrocene containing liquid crystal polymers by a redox reaction) and partially sulfonated polystyrene combine the constituent properties in a way, which is dependent on the measuring method. Polarizing microscopy shows homogenous textures similar to the pure liquid crystal polymer. Mechanical measurements show however the elastomeric behaviour of sulfonated polystyrene. The phase separated structure of these blends is proved by differential scanning calorimetry measurements.     

Improvement of thermal stability of sulfonated polyphosphazenes by introducing a self‐crosslinkable group

We prepared sulfonated polyphosphazenes having various aryloxy substituents, and studied their thermal stabilities and membrane properties. Sulfonated polyphosphazenes were synthesized by the reaction of polydichlorophosphazene with sodium aryloxides and subsequent sulfonation with fuming sulfuric acid. With increasing the degree of sulfonation, the polymers showed higher proton conductivity, but suffered more from swelling in an aqueous solution. We introduced a hydroxymethylphenoxy group onto the phosphazene backbone as a self‐crosslinkable group by reaction of poly(dichlorophosphazene) and a sodium salt of 4‐hydroxymethylphenol. When a film of a sulfonated polymer having a methylol group was heated at 80 °C under vacuum for 1 h, it became insoluble in NMP, indicating the formation of a network structure. We investigated the crosslinking reaction of the polymers by DSC and FTIR. The crosslinking reaction proceeded only in the sulfonated polymers. Because the sulfonated polymers provide acidic protons, the methylol groups became more electrophilic and reacted with neighboring aromatic rings. A condensation reaction between themselves could also occur. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 5850–5858, 2008     

Determination of hydrogen peroxide and organic peroxides in micellar and aqueous–organic media using a spectrophotometric biosensor based on horseradish peroxidase

The expedience of the target-specific control of the properties of a medium (using micellar and aqueous–organic media), in which an indicator process providing the background for the operation of a spectrophotometric sensor based on a polyelectrolyte complex (horseradish peroxidase–chitosan) is conducted, is shown experimentally and proved by calculations of kinetic parameters of the enzymatic reaction. The application of the sensor ensures an increase in the sensitivity of the determination of peroxides of different nature and structures (e.g., hydrogen and urea peroxides, benzoyl peroxide, 2-butanone peroxide and tertbutyl hydroperoxide) in complex matrixes. The proposed approach allows the analyst not only to regulate the performance characteristics of the developed procedures for the determination of peroxides depending on the analytical task, but also to extend the range of test samples (including those insoluble in water) analyzed with no sample preparation.     

Über die Entstehung von Oligoanthrylen bei der milden Sulfonierung von Anthracen

The sulfonation of anthracene yields a variety of products and byproducts by different reaction paths depending on the reaction conditions. While trying to reduce the number of products formed by sulfonation under mild conditions, a new reaction was found: under certain sulfonation conditions anthracene is not sulfonated but reacts to form oligoanthrylenes. The highest average molecular weight of a fraction, insoluble in benzene, is about 3,000.     

Dynamic mechanical properties of ionomer/ionomeric microbead composites

Composites of sulfonated polystyrene (PS-SSA) (0-8 mol % sulfonation) mixed with submicronic styrene-4 vinylpyridine (PS-4VP) (31 mol % 4VP content) microspheres were investigated by differential scanning calorimetry, Fourier transform infrared spectroscopy, and dynamic mechanical spectroscopy at 1 Hz in the glass transition region. The resulting proton transfer reaction from the SSA to the 4VP units was confirmed by IR spectroscopy, and led to a significant increase in the post-T_g Young's modulus as well as a lengthening of the rubbery plateau. Surprisingly, the addition of sulfonated polystyrene microspheres to styrene-vinyl pyridine copolymers had no such effects, possibly because of steric factors. © 1995 John Wiley & Sons, Inc.     

Molecular weight standards from sulfonation of polystyrene

Polystyrene was sulfonated with sulfur trioxide–triethyl phosphate complexes in dichloroethane, the object being to prepare polystyrene sulfonates substantially free of sulfone links between polymer chains. Variations in the sulfone content with reaction conditions were conveniently followed by exclusion chromatography, the sulfone peak appearing at about twice the molecular weight of the main peak. The desired products were obtained from polystyrenes with molecular weights between 1.1 × 10⁵ and 8.7 × 10⁵ by using (at ?20 to +25°C) a 5:1 excess of a 1.5:1 complex, the last at a concentration of 0.5M. Completely soluble polystyrene sulfonate was also obtained from polystyrene of molecular weight 2.05 × 10⁶. Requirements for the successful use of the 1.5:1 complex include careful purification of the dichloroethane and, if 2 g or more polystyrene is to be sulfonated, formation of the complex at ?20°C. A method is given for measuring the sulfonating capability of the reagent before adding the polymer.     

磺化聚苯乙烯的无溶剂制备及其催化性能研究

本文以聚苯乙烯为底物,发烟硫酸为磺化剂,在无溶剂和无催化剂条件下制得了磺化聚苯乙烯,对其酸度和结构性能进行了表征,并详细研究了其催化肉桂酸与正丁醇酯化反应的性能。在醇酸摩尔比为15∶1、环己烷作带水剂的条件下,分别考察了催化剂用量、回流温度、回流时间对酯化反应的影响,优化了反应条件,并在优化条件下,探究了其重复催化使用性能,结果表明,该催化剂重复使用15次,产率基本保持不变,仍可达到69.6%。该催化剂对肉桂酸与其他低级脂肪醇的酯化反应也具有良好的催化效果,是一种环境友好型具有潜在应用价值的固体酸催化剂。     

Enhanced chemiluminescence determination of alpha-amylase by use of amylose labelled with horseradish peroxidase

An enhanced chemiluminescence method for determining soluble and immobilized alpha-amylase has been developed, based on use of an insoluble amylose substrate labelled with horseradish peroxidase. Soluble peroxidase-labelled fragments of the substrate, released by the action of alpha-amylase, are quantified by the peroxidase-catalyzed luminol-peroxide-p-iodophenol reaction. The detection limit for alpha-amylase was 125 fmole (12.5 nM). An insoluble amylopectin labelled with horseradish peroxidase was also effective as a substrate for this type of assay.     

壳层可控导电聚吡咯/聚苯乙烯复合微球及聚吡咯中空微胶囊的制备

在导电聚合物含量较小时,含核壳结构的导电聚合物复合粒子就可以具有和本体相当的导电率,且加工性好,近年来这种核壳结构微粒的制备已引起了科学家们的广泛关注．Armes等[制备了导电聚吡咯、导电聚苯胺包覆聚苯乙烯的核壳结构胶体粒子及聚苯胺和二氧化硅的纳米复合物．刘正平等用改进的方法在粒径为116nm的单分散聚苯乙烯乳胶粒子上包覆聚吡咯,     

New Composite Proton-Conducting Membranes Based on Nafion and Cross-Linked Sulfonated Polystyrene

New composite membranes based on commercial perfluorinated Nafion-115 membrane and cross-linked sulfonated polystyrene were synthesized and investigated. The membranes were prepared by radical polymerization of styrene in the presence of a cross-linking agent divinylbenzene in Nafion polymer matrix and subsequent sulfonation of formed polystyrene. The membranes containing approximately 5 and 10 wt % of cross-linked polystyrene with ion-exchange capacity of 1.1 to 1.3 mg-eq/g were obtained. Modification with sulfonated polystyrene leads to an increase in the moisture content and proton conductivity of membranes in the humidity range of 15 to 100 RH.     

Uniform chitosan hollow microspheres prepared with the sulfonated polystyrene particles templates

Biodegradable chitosan hollow microspheres have been fabricated by employing uniform sulfonated polystyrene (PS) particles as templates. The chitosan was adsorbed onto the surface of the sulfonated polystyrene templates through the electrostatic interaction between the sulfonic acid groups on the templates and the amino groups on the chitosan. Subsequently, the adsorbed chitosan was crosslinked by adding glutaraldehyde. After the removal of the sulfonated polystyrene core, chitosan hollow microspheres were obtained. The longer the sulfonation time used, the smaller the size of the hollow particles and the thicker the chitosan wall obtained. Fourier transform infrared spectrometry was used to characterize the component of the microspheres. The morphologies of the PS templates and the chitosan microspheres were observed by transmission electron microscopy and scanning electron microscopy. The controlled release behavior of the chitosan hollow microspheres was also primarily investigated.     

Protonation of polyaniline with lightly sulfonated polystyrene

Protonation of polyaniline base with lightly sulfonated polystyrene in polar solvents such as dimethyl sulfoxide and N-methyl-2-pyrrolidone was investigated by UV-Vis absorption spectra. As the molar ratio of sulfonated polystyrene/polyaniline increases, the conversion from polyaniline base form to salt form is observed owing to increased protonation. The isosbestic point clearly shows that quinoid unit and semiquinoid unit are in equilibrium. They are functions of the sulfonic acid concentration and solvent media.     

Determination of Mercury at the Picogram per Milliliter Level Using Immobilized Horseradish Peroxidase

Abstract

New test method and test device for the mercury (II) determination at the pg/mL level were developed based on the mercury inhibitory action on horseradish peroxidase immobilized on solid supports – in the cells of the polystyrene plate and on the chromatographic paper. The reactions of o-dianisidine, 3,3′,5,5′-tetramethylbenzidine and o-phenylenediamine oxidation by hydrogen peroxide were used as the indicator reactions. The mercury inhibitory effect increased in the presence of thiourea. Under the elucidated optimal conditions the calibration curves for the mercury determination showed a linear relationship between the peroxidase inhibition degree and the mercury concentration in the range of 0,1–1000 pg/mL. The mercury detection limits were 0,1–10 pg/mL in dependence on the concrete indicator reaction. The analysis completed in 15 min. The proposed test device was applied to the mercury determination in underground waters of Moscow region. The mercury content obtained was coincident with that obtained by atomic-fluorescent method with cold vapour.     

Novel ion‐exchange resin beads with acid–base indicator property

Copolymers of styrene and methyl acrylate were synthesized in the form of spherical beads (0.4–1.2 mm) and sulfonated with concentrated sulfuric acid. The sulfonated copolymer shows an in‐built acid–base indicator property; the yellow color in the acid medium changes to an intense pink color at the equivalence point. Also, the ion‐exchange capacity of the sulfonated copolymer increases with time, reaches a maximum, and decreases thereafter. The results were explained in terms of Fourier transform infrared spectroscopic analysis considering internal Friedel–Craft acylation followed by cyclic dehydration leading to a conjugated structure. The developed ion‐exchange resin also demonstrated better performance in demineralization of water as compared with the conventional polystyrene‐based beads. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 2166–2170, 2003     

Polystyrene resins with immobilized polyamines: Preparation,characterization, and ability to bind Cu(II) ions

Three polyamine ligands, ethylenediamine (EDA), diethylenetriamine (DTA), and triethylenetetramine (TETA), were bound to three chloromethylated “popcorn” polystyrene resins (16, 50, and 100% phenyl ring substitution) with the use of pyridine as the reaction medium. The rate of chloride displacement decreased with increasing molecular weight of the amine and higher degree of resin chloromethylation, while the extent of multiple attachments to the polymer matrix increased. The additional crosslinking, a result of multiple attachments, caused the polyamine resins to swell to a lesser extent in pyridine and water. The ability of the insoluble polyamine–polystyrene resins to chelate Cu²⁺ ions from dilute solutions (200 ppm) was determined at pH 5. With EDA resins the capacity for Cu²⁺ increased with increasing amount of the bound polyamine, with DTA it remained unchanged, while with TETA it was found to decrease.     

Fe–Co/sulfonated polystyrene as an efficient and selective catalyst in heterogeneous Baeyer–Villiger oxidation reaction of cyclic ketones

A highly efficient catalyst Fe–Co/sulfonated polystyrene (Fe–Co/SPS) was introduced and synthesized, which catalyzed BV oxidation of ketones with aqueous hydrogen peroxide to give the corresponding lactones in high yield and selectivity. Solid acid catalyst of Fe–Co/SPS has been prepared by using the 98-wt% sulfuric acid as the sulfonating agent and CoCl₂ combined FeCl₃ as sources of metal ions. Various physical–chemical characterizations including FT-IR, XRD, SEM and TGA, revealed that bimetallic ions Fe³⁺–Co²⁺ species in the sulfonated polystyrene framework were responsible for the catalytic activities. The BV reaction catalyzed by Fe–Co/SPS highlighted the special effects between metal ions and protonic acids as well as solvent-free heterogeneous catalytic oxidation with excellent conversion.     

Amperometric Determination of Galactose,Lactose and Dihydroxyacetone Using Galactose Oxidase in a Flow Injection System with Immobilized Enzyme Reactors and On-Line Dialysis

Abstract

A flow injection manifold containing a dialyzer and reactors with immobilized galactose oxidase and peroxidase was used for the determination of galactose in urine, lactose in milk and dihydroxyacetone in a biotechnological reaction medium. The hydrogen peroxide which is formed by the galactose oxidase reaction was detected by amperometric reduction of a mediator. The latter had been produced from hydrogen peroxide in a peroxidase catalyzed reaction. The hydrogen peroxide detection step was studied with several mediators and hexacyanoferrate (II) was selected. An ion exchange HPLC procedure was used to purify the galactose oxidase, in particular from catalase, and the kinetics and the selectivity of a reactor containing the immobilized enzyme was investigated. Columns for removal of certain interferents such as ascorbic acid were used in the determination of galactose in urine. The response to galactose standards was linear from the detection limit of 2 μM to 60 mM. The throughput was 45 samples per hour and the relative standard deviation 0.4%.