Electrochemical Characterization of a Pyrolytic Carbon Film Electrode and the Effect of Anodization

A pyrolytic carbon (PC) film electrode was fabricated by the chemical vapor deposition (CVD) method. This report deals with the preparation, characterization and electrochemical behavior of this carbon film. Cyclic voltammetry, linear sweep voltammetry, Raman spectroscopy and scanning electron microscopy were employed to characterize the electrode. Low background current and capacitance were observed and the rate of charge transfer for Fe(CN) redox couple was determined via cyclic voltammetry. Also the effect of the anodic activation on the electrochemical activity was evaluated and characterized with respect to the sequence of voltage applied to the electrode. The excellent electrochemical activity and low background current are the reasons why this electrode is attractive for electroanalysis measurements with lower detection limit.     

Electrochemical sensor for Baicalein using a carbon paste electrode doped with carbon nanotubes

We report on the voltammetric determination of the flavonoid Baicalein by using a carbon paste electrode that was doped with multi-walled carbon nanotubes. The resulting sensor exhibits excellent redox activity towards Baicalein due to the large surface area and good conductivity of the electrode. Cyclic voltammetry at various scan rates was used to investigate the redox properties of Baicalein. At the optimum conditions, the sensor displays a linear current response to Baicalein in the 0.02–10 μM concentration range, with a limit of detection of 4.2 n M. The method was successfully applied to the determination of Baicalein in spiked human blood serum samples and in a Chinese oral liquid.

Photoelectrochemical properties of MWCNT-TiO2 hybrid materials as a counter electrode for dye-sensitized solar cells

The MWCNT-Ti02 hybrid materials were prepared by a simply mixing method and used as a counter electrode （CE） for dye-sensitized solar cells. Compared with the platinum CE, MWCNT-TiO2 CE has the similar redox voltage and current response in the cyclic voltammetry. The electrochemical catalytic activity was characterized by the electrochemical impedance spectroscopy and Tafel curve, including the equivalent circuit, the exchange current density, the limiting diffusion current density, and the diffusion coefficient of triiodide/iodide redox species. The results indicate that the reduction process from triiodide to iodide is determined by the kinetic-controlled and diffusion-limited processes. The device performance is optimal based on the MWCNT-TiO2 （mass ratio of 2：1） CE, such as the open-circuit voltage of 0.72 V, the short-circuit photocurrent density of 15.71 mA/cm2, the fill factor of 0.68, and the photon-to-electron conversion efficiency of 7.69%.     

Fabrication and Properties of Redox Ion Doped Few Monolayer Thick Polyelectrolyte Film for Electrochemical Biosensors at High Sensitivity and Specificity

Redox ions are deposited on a polyelectrolyte‐coated gold electrode by an electric field to fabricate an ion‐selective thin film electrode. The Fe(CN)${{{4- \hfill \atop 6\hfill}}}$ ions are deposited on a few monolayer‐coated polyelectrolyte gold electrode by a slow periodic potential cycle. The deposition process and electrode properties are quantitatively and simultaneously monitored by cyclic voltammetry and a novel technique, using a Scanning Electrometer for Electrical Double‐layers (SEED). No redox properties are obtained without the electric‐field‐deposition. Owing to the redox mediation and net charge due to the redox ion, the electrode is ion‐selective. We demonstrate the principle to detect 1 µM of dopamine in a mixture with 1 mM of ascorbic acid.     

Electrochemical determination of sugars by use of multilayer thin films of ferrocene-appended glycogen and concanavalin A

Multilayer thin films containing concanavalin A (Con A) and ferrocene-appended glycogen (FcGly) were prepared by a layer-by-layer deposition Con A and FcGly by biological affinity (lectin–sugar interaction) on a glassy-carbon electrode. The electrochemical response of the Con A–FcGly film-coated electrode to sugars was investigated. A cyclic voltammogram (CV), typical of redox species confined to the surface of the electrode, was obtained. The peak current (resulting from the electric charge involved in the redox reaction) in the CV from the electrode decreased on addition of sugars in the solution, because the amount of FcGly on the electrode surface decreased as a result of disintegration of the Con A–FcGly film on addition of sugar. Thus, d-glucose and other sugars at millimole per liter levels can be detected by use of Con A–FcGly films-coated electrodes.     

Optical manipulation of charged microparticles in polar fluids

In this study, we report a systematic study of the response of a charged microparticle confined in an optical trap and driven by electric fields. The particle is embedded in a polar fluid, hence, the role of ions and counterions forming a double layer around the electrodes and the particle surface itself has been taken into account. We analyze two different cases: (i) electrodes energized by a step‐wise voltage (DC mode) and (ii) electrodes driven by a sinusoidal voltage (AC mode). The experimental outcomes are analyzed in terms of a model that combines the electric response of the electrolytic cell and the motion of the trapped particle. In particular, for the DC mode we analyze the transient particle motion and correlate it with the electric current flowing in the cell. For the AC mode, the stochastic and deterministic motion of the trapped particle is analyzed either in the frequency domain (power spectral density, PSD) or in the time domain (autocorrelation function). Moreover, we will show how these different approaches (DC and AC modes) allow us, assuming predictable the applied electric field (here generated by plane parallel electrodes), to provide accurate estimation (3%) of the net charge carried by the microparticle. Vice versa, we also demonstrate how, once predetermined the charge, the trapped particle acts as a sensitive probe to reveal locally electric fields generated by arbitrary electrode geometries (in this work, wire‐tip geometry).     

Electronic characteristics of fluorene/TiO2 molecular heterojunctions

The electronic properties of molecular junctions of the general type carbon/molecule/TiO2Au were examined as examples of "molecular heterojunctions" consisting of a molecular monolayer and a semiconducting oxide. Junctions containing fluorene bonded to pyrolyzed photoresist film (PPF) were compared to those containing Al2O3 instead of fluorene, and those with only the TiO2 layer. The responses to voltage sweep and pulse stimulation were strongly dependent on junction composition and temperature. A transient current response lasting a few milliseconds results from injection and trapping of electrons in the TiO2 layer, and occurred in all three junction types studied. Conduction in PPFTiO2Au junctions is consistent with space charge limited conduction at low voltage, then a sharp increase in current once the space charge fills all the traps. With fluorene present, there is a slower, persistent change in junction conductance which may be removed by a reverse polarity pulse. This "memory" effect is attributed to a redox process in the TiO2 which generates TiIII and/or TiII, which have much higher conductance than TiO2 due to the presence of conduction band electrons. The redox process amounts to "dynamic doping" of the TiO2 layer by the imposed electric field. The memory effect arises from a combination of the properties of the molecular and oxide layers, and is a special property of the molecular heterojunction configuration.     

Influence of surface states on electron transport through intrinsic Ge nanowires

Solution-grown single-crystal Ge nanowires were used as conductive channels in field effect transistor devices to study the influence of surface states on their electron transport properties. Nanowires contacted with Pt electrodes using focused ion beam metal deposition exhibited linear current-voltage (IV) curves at room temperature with apparent resistivities ranging from 10(1) to 10(-1) Omega cm. In all cases, the nanowire conductance decreased with positive external electric fields applied perpendicular to the nanowire surface by a gate electrode, characteristic of p-type carrier accumulation at the nanowire surface. The field-induced change in conductance exhibited a time-dependent relaxation, with response time and magnitude of current decrease that depended on the nanowire surface chemistry. Nanowires treated with an organic passivation layer using a thermally initiated hydrogermylation reaction exhibited 2 orders of magnitude slower current relaxation and a smaller decrease in current relative to "bare" nanowires with oxidized surfaces.     

Voltammetric sensing of paracetamol, dopamine and 4-aminophenol at a glassy carbon electrode coated with gold nanoparticles and an organophillic layered double hydroxide

A differential pulse voltammetric method was developed for the simultaneous determination of paracetamol, 4-aminophenol and dopamine at pH 7.0 using a glassy carbon electrode (GCE) coated with gold nanoparticles (AuNPs) and a layered double hydroxide sodium modified with dodecyl sulfate (SDS-LDH). The modified electrode displays excellent redox activity towards paracetamol, and the redox current is increased (and the corresponding over-potential decreased) compared to those of the bare GCE, the AuNPs-modified GCE, and the SDS-LDH-modified GCE. The modified electrode enables the determination of paracetamol in the concentration range from 0.5 to 400???M, with a detection limit of 0.13???M (at an S/N of 3). The sensor was successfully applied to the stimultaneous determination of paracetamol and dopamine, and of paracetamol and 4-aminophenol, respectively, in pharmaceutical tablets and in spiked human serum samples.

Charge accumulation and polarization in titanium dioxide electrodes

Nanocrystalline TiO(2) electrodes were studied spectroelectrochemically by observing the simultaneous relaxation of the current and absorbance after applying a voltage step. The absorbance behaved differently in two time regimes: (1) ionic polarization in the oxide electrode, in which charged ions, such as Ti(3+) sites and/or interstitial Ti(4+) sites, move in response to the applied electric field, and (2) the diffusion of Li(+) ions into the TiO(2). These two behaviors were analyzed with equivalent circuit models. Li(+) ions reduce the resistance of the TiO(2) by approximately 90%, increase the capacitance by approximately 350%, and decrease the inductance by approximately 30%. Voltage cycling produces a buildup of intercalated Li(+) ions, lessening the electrode's response to the potential step, and causing it to become a more efficient inductor. The potential distribution in the nanoparticles is described by using a dielectric model in which roughly half the applied potential is dropped across the interface with a Li(+)-ion-containing electrolyte.     

Voltammetric Characterization of Grafted Polymer Modified with ZnO Nanoparticles on Glassy Carbon Electrode

In this study, a grafted polymer (GP) with ZnO nanoparticles (GP/ZnO NPs) was attached on the surface of glassy carbon electrode (GCE), in order to produce a new modified electrode (GP/ZnO NPs-GCE). The gamma irradiation method was used to grafted polystyrene (polymer) with acrylonitrile (monomer), while slow evaporation process was used to prepare the new modified electrode. The cyclic voltammetry (CV) of K₄[Fe(CN)₆] was used to study the electrochemical properties GP/ZnO NPs-GCE. The peak separation (ΔE_pa-c) was 500 mV between the redox peaks of Fe(II)/Fe(III) in an aqueous solution of 1 M KCl and the current ratio of redox current peaks (I_pa/I_pc) was ≈ 1 for the modified electrode. This indicated that the modified electrode has s good reversibility and conductivity, wherefore; it was applied in the voltammetric filed. It was found that the modified electrode GP/ZnO NPs-GCE have a reasonable solubility and stability at various pH medium. Additionally, the sensitivity of the electrochemical analysis by cyclic voltammetric (CV) method is extensively subjected to the pH medium and the scan rate (SR). A couple of redox current peaks of K₄[Fe(CN)₆] in KCl solution was observed with a reversible process: Fe³⁺/Fe²⁺. Finally a good diffusion coefficient of electroactive species (D) for the new modified electrode was found in this study by chronoamperometry method using Cottrell equation.     

The Open Circuit Voltage in Biofuel Cells: Nernstian Shift in Pseudocapacitive Electrodes

In the development of biofuel cells great effort is dedicated to achieving outstanding figures of merit, such as high stability, maximum power output, and a large open circuit voltage. Biofuel cells with immobilized redox mediators, such as redox polymers with integrated enzymes, show experimentally a substantially higher open circuit voltage than the thermodynamically expected value. Although this phenomenon is widely reported in the literature, there is no comprehensive understanding of the potential shift, the high open circuit voltages have not been discussed in detail, and hence they are only accepted as an inherent property of the investigated systems. We demonstrate that this effect is the result of a Nernstian shift of the electrode potential when catalytic conversion takes place in the absence or at very low current flow. Experimental evidence confirms that the immobilization of redox centers on the electrode surface results in the assembled biofuel cell delivering a higher power output because of charge storage upon catalytic conversion. Our findings have direct implications for the design and evaluation of (bio)fuel cells with pseudocapacitive elements.     

Determination of melamine in food contact materials using an electrode modified with gold nanoparticles and reduced graphene oxide

We describe an electrochemical sensor for melamine based on a glassy carbon electrode (GCE) modified with reduced graphene oxide that was decorated with gold nanoparticles (AuNP/rGO). The AuNPs/rGO nanocomposite was synthesized by co-reduction of Au(III) and graphene oxide and characterized by transmission electron microscopy, Raman spectroscopy, X-ray diffraction and X-ray photoelectron spectroscopy. The response of the modified GCE to melamine was investigated by using hexacyanoferrate as an electrochemical reporter. It is found that the electrochemical response to hexacyanoferrate is increasingly suppressed by increasing concentration of melamine. This is attributed to competitive adsorption of melamine at the AuNP/rGO composite through the interaction between the amino groups of melamine and the AuNPs. The presence of rGO, in turn, provides a platform for a more uniform distribution of the AuNPs and enhances the electron transfer rate of the redox reaction. The findings were used to develop a sensitive method for the determination of melamine. Under optimized conditions, the redox peak current of hexacyanoferrate at a working voltage of 171 mV (vs. SCE) is linearly related to the concentration of melamine in 5.0 to 50 nM range. The method was successfully applied to the determination of melamine in food contact materials.

A simple electrochemical sensor based on gold nanoparticles decorated reduced graphene oxide was developed for highly sensitive measurement of melamine in food contact materials.

     

Amperometric Detection of Catecholamine Neurotransmitters Using Electrocatalytic Substrate Recycling at a Laccase Electrode

An enzyme electrode based on the coimmobilization of an osmium redox polymer and laccase on glassy carbon electrodes has been applied to ultra sensitive amperometric detection of the catecholamine neurotransmitters dopamine, epinephrine and norepinephrine, resulting in nanomolar detection limits, as low as 4 nM for dopamine. The sensitivity of the electrode is due to signal amplification via oxidation of the catecholamine by the immobilized laccase, which is regenerated by concomitant reduction of oxygen to water, coupled to the electrocatalytic re‐reduction of the oxidized catecholamine by the osmium redox complex: electrocatalytic substrate recycling. In addition because the sensor can be operated in reductive mode at ?0.2 V (vs. Ag/AgCl), noise and interferences are diminished. Combined with its high sensitivity this enzyme electrode also exhibited excellent selectivity allowing the detection of catecholamines in the presence of ascorbic acid. However, differentiation between the current responses achieved for the three catecholamines is not possible. The effective mode of constant recycling, resulting in amplification of the current response, of the laccase enzyme electrode sensor combined with the inherent advantages of using electrochemical techniques holds great promise for the future of catecholamine detection and monitoring.     

Screening and separation of charges in microscale devices: complete planar solution of the Poisson-Boltzmann equation

The Poisson-Boltzmann (PB) equation is widely used to calculate the interaction between electric potential and the distribution of charged species. In the case of a symmetrical electrolyte in planar geometry, the Gouy-Chapman (GC) solution is generally presented as the analytical solution of the PB equation. However, we demonstrate here that this GC solution assumes the presence of a bulk region with zero electric field, which is not justified in microdevices. In order to extend the range of validity, we obtain here the complete numerical solution of the planar PB equation, supported with analytical approximations. For low applied voltages, it agrees with the GC solution. Here, the electric double layers fully absorb the applied voltage such that a region appears where the electric field is screened. For higher voltages (of order 1 V in microdevices), the solution of the PB equation shows a dramatically different behavior, in that the double layers can no longer absorb the complete applied voltage. Instead, a finite field remains throughout the device that leads to complete separation of the charged species. In this higher voltage regime, the double layer characteristics are no longer described by the usual Debye parameter kappa, and the ion concentration at the electrodes is intrinsically bound (even without assuming steric interactions). In addition, we have performed measurements of the electrode polarization current on a nonaqueous model electrolyte inside a microdevice. The experimental results are fully consistent with our calculations, for the complete concentration and voltage range of interest.     

Thioether‐Functionalized Quinone‐Based Resorcin[4]arene Cavitands: Electroswitchable Molecular Actuators

The utility of molecular actuators in nanoelectronics requires activation of mechanical motion by electric charge at the interface with conductive surfaces. We functionalized redox‐active resorcin[4]arene‐quinone cavitands with thioethers as surface‐anchoring groups at the lower rim and investigated their propensity to act as electroswitchable actuators that can adopt two different conformations in response to changes in applied potential. Molecular design was assessed by DFT calculations and X‐ray analysis. Electronic properties were experimentally studied in solution and thin films electrochemically, as well as by X‐ray photoelectron spectroscopy on gold substrates. The redox interconversion between the oxidized (quinone, Q ) and the reduced (semiquinone, SQ ) state was monitored by UV‐Vis‐NIR spectroelectrochemistry and EPR spectroscopy. Reduction to the SQ state induces a conformational change, providing the basis for potential voltage‐controlled molecular actuating devices.     

A liquid crystal microlens obtained with a non-uniform electric field

A homogeneously aligned nematic liquid crystal cell with a hole-patterned electrode and with an indium-tin oxide (ITO-) coated counter-electrode has been prepared. A non-uniform electric field can be produced by the asymmetrical electrode structure. The liquid crystal director can be reoriented by applying a voltage across the electrodes, and this produces an axially symmetrical profile of the refractive index. This liquid crystal cell is expected to have a lens effect and so its optical properties have been investigated. The profile of the output light intensity was measured by using a detecting system with an optical fibre. Some relationships between the lens properties, the diameter of the hole and the thickness of the liquid crystal layer have been examined. The liquid crystal cell becomes a convex (converging) lens with a relatively low voltage. A focal length of several millimetres can be obtained by applying voltages of 3-4 V. As the applied voltage increases, the focal length becomes longer, and the cell changes to a concave (diverging) lens when a high voltage is applied (≳ 20 V). These properties are discussed from the viewpoint of the director orientation effects resulting from the non-uniform electric fields in the cell.     

Photoinduced thermal copper reduction onto gold nanocrystals under potentiostatic control

We study the photoreduction of adsorbed copper ions onto Au nanoparticles, on an indium tin oxide (ITO) electrode in an aqueous electrochemical cell, as a function of applied voltage and laser intensity. The photocurrent is a nonlinear function of laser intensity and increases sharply with cathodic voltage in the underpotential deposition region. The photoreduction is attributed to laser heating of the Au nanoparticles rather than "hot electron" processes. Numerical simulation of the Butler-Volmer kinetic equation using experimental parameters predicts a several orders of magnitude increase in current for a temperature rise of a few Kelvin.     

A Photoelectrochemical Solar Cell Consisting of a Cadmium Sulfide Photoanode and a Ruthenium–2,2′‐Bipyridine Redox Shuttle in a Non‐aqueous Electrolyte

A photoelectrochemical (PEC) cell consisting of an n‐type CdS single‐crystal electrode and a Pt counter electrode with the ruthenium–2,2′‐bipyridine complex [Ru(bpy)₃]^2+/3+ as the redox shuttle in a non‐aqueous electrolyte was studied to obtain a higher open‐circuit voltage (V_OC) than the onset voltage for water splitting. A V_OC of 1.48 V and a short‐circuit current (I_SC) of 3.88 mA cm^?2 were obtained under irradiation by a 300 W Xe lamp with 420–800 nm visible light. This relatively high voltage was presumably due to the difference between the Fermi level of photo‐irradiated n‐type CdS and the redox potential of the Ru complex at the Pt electrode. The smooth redox reaction of the Ru complex with one‐electron transfer was thought to have contributed to the high V_OC and I_SC. The obtained V_OC was more than the onset voltage of water electrolysis for hydrogen and oxygen generation, suggesting prospects for application in water electrolysis.     

Amperometric Determination of Ascorbic Acid at an Electrodeposited Redox Polymer Film Modified Gold Electrode

A sensitive and selective electrochemical method for the determination of ascorbic acid was developed. It was shown that a hydrated osmium complex‐containing redox polymer film can be electrodeposited at the gold electrode and it exhibits excellent electrocatalytic activity towards the oxidation of ascorbic acid. In contrast to a bare gold electrode, the oxidation current of ascorbic acid increased greatly and the oxidation peak potential shifted negatively to about 0.01 V (vs. SCE) at the modified electrode. Amperometric measurements were performed at an applied potential of 0.01 V and a linear response was obtained in the range of 2–400 μM with a limit of detection (LOD) of 0.6 μM (S/N=3). The interference studies showed that the modified electrode exhibits excellent selectivity in the presence of large excess of uric acid and dopamine. The proposed procedure was successfully applied to the determination of ascorbic acid in human urine samples.