毛细管电泳—钴钛菁碳糊修饰电极电化学催化氧化测定羟胺和巯基类…

本文利用自制的毛细管电泳－电化学安培检测装置，以钴钛菁碳糊修饰电极为工作电极。在中性磷酸体系缓冲溶液中，对四种羟胺和巯基类化合物的混合物进行了分离和测定，检测下限羟胺类化合物为５．０×１０＾－６ｍｏｌ／Ｌ巯基类化合物为１．０×１０＾－５ｍｏｌ／Ｌ。对     

用流动注射法研究巯基化合物-铈(Ⅳ)-氢化可的松的化学发光反应

采用流动注射法研究了巯基化合物－铈（Ⅳ）－氢化可的松（ＨＣＲｓ）体系的化学发光行 为，对影响化学发光强度的诸因素进行试验和探讨，建立了流动注射化学发光法检测谷胱甘 肽（ＧＳＨ），半胱氨酸（Ｃｙｓ）等含巯基化合物的新方法。检测ＧＳＨ和Ｃｙｓ和线性范围分别为 ２．０×１０－６～１０．０×１０－５ｍｏｌ／Ｌ和１．０×１０－６ｍｏｌ／Ｌ～１０．０×１０－５ｍｏｌ／Ｌ；检测限分别为２．０ ×１０－７ｍｏｌ／Ｌ和１．４×１０－６ｍｏｌ／Ｌ（Ｓ／Ｎ＝３）；ＧＳＨ、Ｃｙｓ加入血清中进行回收测定的回收率 为９０％～９５％，相对标准偏差小于４％。     

用流动注射法研究巯基化合物—铈（IV）—氢化可的松的化学发光反应

采用流动注射法研究了巯基化合物－铈（Ⅳ）－氢化可的松（ＨＣＲｓ）体系的化学发光行为，对影响化学发光强度的诸因素进行试验和探讨，建立了流动注射化学发光法检测谷胱甘肽（ＧＳＨ），半胱氨酸（Ｃｙｓ）等含巯基化合物的新方法。检测ＧＳＨ和Ｃｙｓ和线性范围分别为２．０×１０＾－６￣１０．０×１０＾－５ｍｏｌ／Ｌ和１．０×１０＾－６ｍｏｌ／Ｌ￣１０．０×１０＾－５ｍｏｌ／Ｌ；检测限分别为２．０×１０＾－７ｍｏｌ     

聚吡咯碳糊电极的研制及应用

研制了聚吡咯电极，探讨了该电极的性能和实用性，实验结果表明，该电极可用于伏安法快速测定Ｌ－抗坏血酸，在０．１ｍｏｌ／ＬＫＮＯ３底液中，线性范围为１．０×１０＾－１１～９．０×１０＾－９ｍｏｌ／Ｌ检测限为５．０×１０＾－１２ｍｏｌ／Ｌ，电极具有具有良好的重现性和高选择性，响应迅速，使用寿命３个月以上。     

全固态林可霉素选择电极的研制及应用

本以石墨棒为导电基体，以硅钨酸，林可霉素为电活性和的制成了全固态林可霉素离子选择电极。所制电极在１．０×１０＾－１－５．０×１０＾－５ｍｏｌ／Ｌ浓度范围内有线性响应，斜率为５８．３ｍＶ／ｐＣ，检测下限为２．５×１０＾－５ｍｏｌ／Ｌ。电极响应迅速，具有良好的稳定性，可用于林可霉素含量的快速测定。     

L—氨基酸氧化酶电极的制作及电极特性的研究

报道了一种新的Ｌ－氨基酸氧化酶电极，这种酶电极系由氨气敏电极和以氨基化玻璃布为载体的酶膜所组成；研究了固定化条件对酶膜活性的影响以及底物浓度、温度和ｐＨ对电极响应特性的影响。该电极在６．０×１０＾－５～４．０×１０＾－３ｍｏｌ／Ｌ的底物浓度范围内呈良好的线性关系，检测下限为５．０×１０＾－５ｍｏｌ／Ｌ。在最宜条件下，酶电极具有良好的稳定性。     

巯基钴卟啉自组装膜的表征及催化性能

用自制的新型尾式巯基钴（Ⅱ）卟啉在金电极上制成自组装单分子膜,并用ＸＰＳ,ＳＥＭ和电化学的方法进行了表征。该膜对抗坏血酸具有良好的催化作用,其氧化过电位较裸金电极上降低了１４０ ｍＶ,响应电流与抗坏血酸（ＡＡ）的浓度在 ７．８ × １０－５ｍｏｌ／Ｌ～１．０×１０－２ｍｏｌ／Ｌ的范围内具有良好的线性关系,相关系数为 ０．９９８１;检测下限为 １．３ × １０－８ｍｏｌ／Ｌ（富集 １０ｍｉｎ）。     

L—天冬门酰胺微生物电极的研制

以谷氨酸棒状杆菌作为生物催化剂，与基础氨气敏电极结合制成对Ｌ－天冬门酰胺响应的微生物电极，在３０℃时选择ＰＨ＝８．５的硼酸缓冲体系，测得电极的线性范围为７．１×１０＾－５－１．１×１０＾－２ｍｏｌ／Ｌ，斜率为５１．４ｍＶ／ｄｅｃ，检测下限为２．０×１０＾－５ｍｏｌ／Ｌ，响应时间为４－７ｍｉｎ寿命达３０ｄ以上。     

苄氧基甲基12—冠—3的合成与锂离子选择性电极研究

报道了苄氧基甲基－１２－冠－３－的合成，并以此化合物作载体研制成锂离子选择电极。用苄氧基甲基－１２冠－３－为载体的电极对锂离子响应拇性范围为１．０×１０＾－１－８．３×１０＾－５ｍｏｌ／Ｌ．检测限为４．２×１０＾－５ｍｏｌ／Ｌ，斜率为５７．４ｍＶ／ｐＬｉ。电极具有好的稳定性和重现性。     

聚氯乙烯膜氧氟沙星和曲马多选择电极的研制与应用

报道了以氧氟沙星碘化物与碘化铋的分子缔合物为电活性物的新型聚氯乙烯膜氧氟沙星选择电极。并以类似的方法报道了曲马多选择电极。氧氟沙星电极的特响应范围为１．０×１０＾－２－２．２×１０＾－５ｍｏｌ／Ｌ，斜率为３０ｍＶ／ＰＣ，检测限为１．６×１０＾－５ｍｏｌ／Ｌ。     

二氧化碳和丙烯直接合成甲基丙烯酸的NiPMo/TiO2催化剂的研究

用溶胶-凝胶法以磷钼酸(MPA)的镍盐溶液水解钛酸四丁酯制备了NiPMo/TiO2催化剂.使用ICP、 XRD、 TG-DTA、 IR、 TPD-MS和微反应技术研究了催化剂的化学组成、热稳定性、化学吸附性质和催化反应性能.杂多钼酸盐与TiO2通过O2-在TiO2表面发生了键合.在623 K下,杂多阴离子仍保持原有的Keggin结构.CO2在Lewis酸位Ni(Ⅱ)和Lewis碱位Ni-O-Mo的桥氧协同作用下生成CO2卧式吸附态Ni(Ⅱ)←O-(CO)←(O--Ni).丙烯有多种吸附态在催化剂上吸附.在563 K、 1 MPa和空速1500 h-1的反应条件下,丙烯的摩尔转化率为3.2%,产物MAA选择性为95%.     

Toward new camptothecins. Part 6: Synthesis of crucial ketones and their use in Friedländer reaction

In the context of the preparation of camptothecin and luotonin A analogs, the synthesis of some key keto-precursors and their use in Friedländer condensation are described. This paper also focuses on the stability of these keto intermediates and emphasizes the major differences between indolizinones and pyrroloquinazolinones series. Noteworthy is also the report of some original structures isolated as by-products of some experiments.     

CoFe2O4自形成磁性液体场致结构化对磁化的影响

The Langevin paramagnetic theory can’t describe the relation between magnetization of ferrofluids and applied magnetic field. The structuralization of ferrofluids, which is considered the main influence factor of the magnetization, is regarded. The part of magnetization works is deposited when the structure is forming. This action influences the magnetization of ferrofluids directly or indirectly. On the base of the “compressing” model, the Langevin function that usually describes the magnetization of ferrofluid is modified, and a well-fitted curve is obtained. An equation of the relation between the equivalent volume fraction after being “compressed” and the intensity of magnetic field is discovered, which approximately describes the process of magnetization. The relation between the approximate initial susceptibility and the volume fraction can be obtained from modified formula.     

Highly regioselective Buchwald–Hartwig amination at C-2 of 2,4-dichloropyridine enabling a novel approach to 2,4-bisanilinopyridine (BAPyd) libraries

The highly regioselective Buchwald–Hartwig amination at C-2 of the cheap and readily accessible reagent, 2,4-dichloropyridine with a range of anilines and heterocyclic amines is described. This new methodology is robust and provides a facile access to 4-chloro-N-phenylpyridin-2-amines on 0.25 mol scale. These intermediates undergo a further Buchwald–Hartwig amination at higher temperature to enable rapid exploration of the chemical space at C-4 and to provide a library of 2,4-bisaminopyridines.     

KMnO4-mediated oxidative CN bond cleavage of tertiary amines: Synthesis of amides and sulfonamides

KMnO₄-mediated oxidative CN bond cleavage of tertiary amines producing secondary amine was introduced, which was trapped by electrophiles (acyl chloride and sulfonyl chloride) to form amides and sulfonamides. The reaction could take place at mild condition, tolerating a wide range of function groups and affording products in moderate to excellent yields.     

Chemistry of heterocyclic compounds at the A. E. Favorsky Irkutsk Institute of Chemistry, Siberian Branch of the Russian Academy of Sciences, over 50 years (Review)

The review contains a concise historical account and information on the most significant researches undertaken by the staff at the A. E. Favorsky Irkutsk Institute of Chemistry, Siberian Branch of the Russian Academy of Sciences on the Chemistry of Heterocyclic Compounds. Dedicated to Academician of the Russian Academy of Sciences B. A. Trofimov on his 70th jubilee. Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 10, pp. 1443–1502, October, 2008.     

Sulfur-directed metal-free and regiospecific methyl C(sp3)–H imidation of thioanisoles

Regiospecific and direct imidation of the methyl C(sp³)–H bond of thioanisoles is realized under mild and metal-free conditions with N-fluorobis(benzenesulfonyl)imide as an oxidant and nitrogen source. Proposed mechanism suggests that thionium ion intermediates and a Pummerer-type reaction are involved. The imidation has advantages such as high step-economy, excellent functionality tolerance, and regiospecificity, giving structurally diverse imidation products.     

Selective syntheses of 2H-1,3-oxazines and 1H-pyrrol-3(2H)-ones via temperature-dependent Rh(II)-carbenoid-mediated 2H-azirine-ring expansion

The Rh(II)-catalyzed reaction of 2-carbonyl-substituted 2H-azirines with ethyl 2-cyano-2-diazoacetate or 2-diazo-3,3,3-trifluoropropionate provides an easy access to 2H-1,3-oxazines and 1H-pyrrol-3(2H)-ones. These compounds can be selectively prepared from the same starting material using temperature as the only varied parameter. The 2-azabuta-1,3-diene intermediate, a common precursor for both heterocyclic products, isomerizes into 2H-1,3-oxazine under kinetic control, while 1H-pyrrol-3(2H)-one is the sole product of the reaction at elevated temperatures. According to DFT-calculations a one-atom oxazine ring contraction involving ring-opening to a 2-azabuta-1,3-diene intermediate, followed by a 1,5- and 1,2-prototropic shift leads to the consecutive formation of imidoylketene and azomethine ylide, which then further undergo cyclization to the pyrrole derivative.     

Synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives

Different approaches for the synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives from simple amino acids have been investigated. A library of 33 precursors for the preparation of N-hydroxy pyrazinones was obtained in moderate to good yields.