Preparation and characterization of manganese-containing silicates with ZSM-48 structure

报道了新型杂原子分子筛Ｍｎ－ＺＳＭ－４８的合成与表征。红外光谱和紫外漫反射光谱测试表明Ｍｎ（Ⅱ）离子进入了分子筛骨架。Ｍｎ（Ⅱ）同晶取代Ｓｉ（Ⅳ）导致产物晶粒的形貌和热性质有所不同。反应混合物中１,６－己二胺的含量,水含量和ＳｉＭｎ比对产物的晶化有很大影响。Ｍｎ－ＺＳＭ－４８作为ＣＯ加氢合成低碳烯烃的催化剂载体较Ｓｉ－ＺＳＭ－４８显示出很高的催化活性和明显的选择性     

碳化钼催化材料的制备、表征及CO加氢反应性能的研究

以MoO3为前驱体,CH4/4H2为碳化介质,通过程序升温反应法(TPRe)制备了不同晶型碳化钼 (β-Mo2C和α-MoC1-x) 催化材料,并通过XRD、BET、TEM、SEM和XPS等表征手段对碳化钼材料的晶体结构、比表面积、形貌及电子特征进行了研究;同时考察了不同晶型碳化钼的CO加氢反应性能。结果表明,其具有很高CO加氢活性,产物主要为烷烃,同时有少量低碳醇生成。因此,碳化钼有望成为新型F T合成或低碳醇合成的催化剂。     

Preparation and characterization of organotin-oxomolybdate coordination polymers and their use in sulfoxidation catalysis

The organotin-oxomolybdates [(R(3)Sn)(2)MoO(4)].n H(2)O (R=methyl, n-butyl, cyclohexyl, phenyl, benzyl) have been prepared and tested as catalysts for the oxidation of benzothiophene with aqueous hydrogen peroxide, at 35 degrees C and atmospheric pressure. In all cases, the 1,1-dioxide was the only observed product. The kinetic profiles depend on the nature of the tin-bound R group and also on the addition of a co-solvent. For the tribenzyltin derivative, the apparent activation energies for sulfoxidation as a function of the co-solvent are in the order 1,2-dichloroethane (5 kcal mol(-1))相似文献   

铁镍纳米合金的制备与表征

铁镍纳米合金在高密度磁记录材料、吸波隐身材料及高效催化剂等领域具有广泛的用途,近年来在国内外倍受关注[1-3].     

Adsorption of Naphthalene and Quinoline on Pt,Pd and Rh: A DFT Study

The adsorption of naphthalene and quinoline on Pt(111), Pd(111) and Rh(111) surfaces is studied using density functional theory. The metal surfaces are simulated by means of large confined clusters and for Pt by means of a slab with periodic boundary conditions (PBC). Calculation parameters such as basis set convergence, basis set superposition error and effects of cluster relaxation and size are analyzed in order to assess the aptness of the cluster model. For all the metals, the preferred sites of adsorption are analyzed, thus revealing their different behaviors concerning structure and stability of adsorption modes. On Pt, the molecules have the richest theoretical configurational variety. Naphthalene and quinoline are found to adsorb preferentially on di‐bridge[7] sites on the three metals, and Rh exhibits higher adsorption energies than Pt and Pd. Structural features of the adsorbed molecules are correlated to the calculated adsorption energies. The di‐bridge[7] adsorption modes are studied in deeper detail decomposing the adsorption energies in two terms arising from molecular distortion and binding interaction to the metal. Molecular distortion is correlated to the HOMO–LUMO energy gap. The larger adsorption energies found for interactions with Rh result from the lower contribution of the distortion term. Binding interactions are described by analyzing the wave functions of naphthalene and quinoline adsorbed on a subunit of the large clusters in order to reduce the complexity of the analysis. Molecular orbitals are studied using concepts of Frontier Molecular Orbitals theory. This approach reveals that in the adsorption of naphthalene and quinoline on Pt and Pd, an antibonding state lies below the Fermi energy, while on Rh all antibonding states are empty, in agreement with the larger interaction energies. In addition, further insight is gained by projecting the density of states on the d band of the clean surfaces and of the adsorbed systems. This results in the rationalization of the structural features in terms of the concepts of electronic structure theory. The distributions of electronic density are described by means of Hirshfeld charges and isosurfaces of differential electron density. The net electron transfer from the metals to the molecules for most of the sites correlates with the trends of the adsorption energies.     

氰基衍生化制备胺的研究进展

胺是有机分子中最常见且重要的结构之一,广泛存在于天然产物分子、药物、染料、塑料等的分子结构中,开发合成胺的有效方法在化学工业中具有很高的需求但仍充满挑战。在诸多已知有机胺的合成方法中,以氰基为前体还原衍生化制备胺被认为是一条原子经济且绿色可行的方案。然而,氰基中存在稳定的碳氮三重键,还原过程涉及较多中间体,而部分中间体活性比氰基更高,因此反应受还原剂、催化剂、反应条件的影响很大,由氰基选择性制备目标胺结构仍充满挑战。本文从氰基的基本电子结构与反应活性出发,综述了近年来以氰基为原料的官能团胺基化反应,对部分重要反应的催化剂和反应机理做了简要讨论,为设计氰基制胺催化剂和应用工艺提供了新的视角。     

Preparation, characterization, activity and selectivity of highly loaded oxide promoted ruthenium catalysts for selective hydrogenation of benzene to cyclohexene

Summary The influence of promoters and precipitants of the catalyst precursor on the activity and selectivity of the hydrogenation of benzene to cyclohexene catalyzed by highly loaded oxide-promoted Ru/ZrO₂catalysts, carried out in a tetraphase reactor (in the presence of an aqueous solution of ZnSO₄), at 423 K and 5 Mpa, was studied. The effect of hydrogen diffusion on the reaction kinetics and on the selectivity has been taken into consideration, the internal pore diffusion being actually the limiting step. Hydrogen chemisorption measurements indicate that the catalyst activity is not influenced by the Ru dispersion, but rather by weakly chemisorbed species.     

Preparation and characterization of nanocrystalline ZnO by direct precipitation method

Nanocrystalline ZnO was prepared with ZnCl₂·2H₂O and (NH₄)₂CO₃ as raw materials by direct precipitation method. The precursor was proved to be [Zn₅(OH)₆(CO₃)₂] by TG-DTG-DTA and IR analysis. This precursor was calcined at 300°C for 1, 2 and 3 hours respectively, and then the nanocrystalline ZnO of different grain size were obtained. The nanocrystalline ZnO was characterized using X-ray diffraction (XRD), TEM and Brunner-Emmett-Teller method (BET). Experimental results for nanocrystalline ZnO showed that the minimum size was about 8nm, the maximum was about 15 nm and the mean grain size was 12 nm, the surface area was 80.56 m²/g and the purity was 99.9% when the precursor was calcined at 300°C for 2 h. __________ Translated from Journal of Inner Mongolia Normal University (Natural Science Edition), 2006, 35(1) (in Chinese)     

Preparation and characterization of manganese- and samarium-manganese-alumina pillared montmorillonites

A Na-montmorillonite was intercalated with manganese- and samarium-manganese-aluminium solutions. The pillared montmorillonites were characterized by X-ray diffraction and nitrogen adsorption. The presence of manganese and samarium-manganese citrates in the intercalation process modify the distance between the clay sheets and the microporous structure of the pillared montmorillonites.     

十八胺修饰镍微球的制备与表征

采用热分解方法,以醋酸镍为前驱体,以表面活性剂十八胺为溶剂、还原剂和稳定剂,在镍纳米微粒初生成时进行原位表面修饰,制备出接近单分散的镍微球.采用扫描电子显微镜、透射电子显微镜、X射线衍射仪、红外光谱仪等分析了产物的尺寸、形貌、晶体结构及成分.结果表明,所制备的镍微球具有面心立方结构,由分散性良好、尺寸为300～400nm的纳米微粒组成;其在有机介质中具有良好的分散性,同时保持磁性纳米微粒的特性,可望用于电磁屏蔽材料和吸波材料.     

Selective catalysis and nanoscience: an inseparable pair

Selective catalysts can be considered as nanomachines designed to perform the synthesis of molecules with high reaction activity and high selectivity. These properties arise from a precise control of the structure of the active sites, of the three-dimensional environment and of their relationship. In both homogeneous and heterogeneous catalysts the active site three-dimensional environment ensemble is always a complex structure resembling the tuneable structure of enzymes, which are the most efficient catalysts optimized by nature over billions of years. To illustrate this concept the structure of a few homogeneous and heterogeneous catalysts for alkenes hydrogenation and for olefin polymerization are chosen and discussed as examples.     

P-stereogenic trifluoromethyl derivatives of Josiphos: synthesis, coordination properties, and applications in asymmetric catalysis

Intermolecular nucleophilic substitution of a CF(3) group of bis(trifluoromethyl)phosphanes by a lithiated Ugi's amine (4) affords both diastereoisomers of the corresponding P-stereogenic trifluoromethylphosphanes 6 and 7. Separation of the isomers by column chromatography on silica gel followed by substitution of the dimethylamino group with phosphanes or pyrazoles yields the bidentate P^P (9 and 10) or P^N ligands (12 and 13) without epimerization at the stereogenic phosphorus center. The coordination properties of these bidentate ligands were investigated on the basis of crystal structures of the corresponding palladium and rhodium complexes. IR spectroscopic measurements of rhodium-carbonyl complexes 16-23 indicated the strongly electronic-withdrawing character of these phosphanes. The catalytic potential of these ligands was demonstrated in the rhodium-catalyzed hydrogenation of olefins as well as in the palladium-catalyzed allylic alkylation reaction, where high activities and enantioselectivities were observed.     

两亲性TS-1沸石的制备及其相界面催化反应性能的研究

采用三甲基氯硅烷和正十八烷基三氯硅烷对TS-1沸石样品进行表面修饰，制备出了两亲性含钛沸石样品．这类两亲性含钛沸石能分布于水、油两相界面处．改性后样品的骨架未遭破坏，其中钛仍然保持了四配位骨架钛的状态，但其晶貌发生了某些改变．这类两亲性样品在不加共溶剂及静置的反应条件下，对1-辛烯和双氧水的相界面环氧化催化反应表现出优良的催化活性．尤其是三甲基氯硅烷改性后的TS-1沸石，在相界面催化反应中，具有比改性前高得多的活性．我们还发现，在该相界面催化反应条件中，相界面的面积和催化剂用量是两个最重要的影响因素，当相界面面积(cm^2)与催化剂用量(mg)的比例控制在0．15左右时，两亲性TS-1沸石的催化活性达到最高值．     

Potential of thermal analysis in preparation and characterization of solid catalysis

Supported catalysts contain often only small amounts of active component(s) which renders their characterization difficult, particularly because they usually contain a substantial amount of water. Thermal analysis (TA) coupled with mass spectrometry (MS) offers an interesting potential for characterizing such material, various steps of catalyst preparation as well as crucial properties of fresh and used catalysts can be investigated. Some examples illustrating the versatility of TA-MS in catalysis research, such as solid-state reactions occurring upon exposure of the precursors or catalysts to reducing, oxidizing or inert atmosphere, are presented in this study. The combined use of TA and MS allows in many cases a much more detailed interpretation of the observed phenomena than could be achieved by one of these methods alone.     

Preparation,characterization and compatibility studies of poly(DFAMO/AMMO)

Poly(3-difluoroaminomethyl-3-methyl oxetane (DFAMO)/3-azidomethyl-3-methyl oxetane (AMMO)) (PDA) can be used as an energetic pre-polymer in the binder systems of solid propellants and polymer-bonded explosives (PBXs). The cationic solution polymerization affords PDA using butane diol (BDO) and boron trifluride etherate (TFBE) as initiator and catalyst, separately. Its molecular structure is characterized and thermal decomposition behavior is investigated by thermogravimetric analysis (TG), differential scanning calorimetry (DSC) and Fourier transform infrared spectroscopy (FTIR). The copolymer has good thermal stability and exhibits a three-step mass-loss process with the first two steps mainly belonging to the thermal decomposition of difluoroamino and azido groups, respectively. DSC method is performed to evaluate the compatibility of PDA with some energetic components and inert materials. More than half of the selected materials are compatible with PDA, which including cyclotrimethylenetrinitramine (RDX), 2,4,6-trinitrotoluene (TNT), 1,3,5-triamino-2,4,6-trinitrobenzene (TATB), pentaerythritol tetranitrate (PETN), ammonium perchlorate (AP), ammonium nitrate (AN), potassium nitrate (KNO₃), aluminum powder (Al), aluminum oxide (Al₂O₃), 2-nitrodiphenylamine (NDPA) and 1,3-diethyl-1,3-diphenyl urea (C₁).     

氧化铜纳米片及其自组装球状纳米结构的制备及催化作用

氧化铜具有独特的光电和光化学性能,可被用来制作太阳能电池或高能锂电池~([1,2]).纳米氧化铜还可以作为催化剂、载体以及电极活性材料等~([3-7]).在实际应用中,纳米材料的结构和形貌对其性能有很大影响.     

Chiral phosphane alkenes (PALs): simple synthesis, applications in catalysis, and functional hemilability

A simple synthesis of a chiral phosphane alkene (PAL) involves: 1) palladium-catalyzed Suzuki coupling of 10-bromo-5H-dibenzo[a,d]cyclohepten-5-ol (1) with phenylboronic acid to give quantitatively 10-phenyl-5H-dibenzo[a,d]cyclohepten-5-ol (2); 2) reaction of 2 with Ph(2)PCl under acidic conditions to give a racemic mixture of the phosphane oxide (10-phenyl-5H-dibenzo[a,d]cyclohepten-5-yl)diphenylphosphane oxide ((Ph)troppo(Ph), 3), which is separated into enantiomers by using high-pressure liquid chromatography (HPLC) on a chiral column; 3) reduction with trichlorosilane to give the enantiomerically pure phosphanes (R)- and (S)-(10-phenyl-5H-dibenzo[a,d]cyclohepten-5-yl)diphenylphosphane ((Ph)tropp(Ph), 4). This highly rigid, concave-shaped ligand serves as a bidentate ligand in Rh(I) and Ir(I) complexes. Catalysts prepared from [Rh(2)(mu(2)-Cl)(2)(C(2)H(4))(4)] and (S)-4 have allowed the efficient enantioselective 1,4-addition of arylboronic acids to alpha,beta-unsaturated carbonyls (Hayashi-Miyaura reaction) (5-0.1 mol % catalyst, up to 95% ee). The iridium complex (S,S)-[Ir((Ph)tropp(Ph))(2)]OTf ((S,S)-6; OTf=SO(3)CF(3)) has been used as a catalyst in the hydrogenation of various nonfunctionalized and functionalized olefins (turnover frequencies (TOFs) of up to 4000 h(-1)) and moderate enantiomeric excesses have been achieved (up to 67% ee). [Ir((Ph)tropp(Ph))(2)]OTf reversibly takes up three equivalents of H(2). The highly reactive octahedral [Ir(H)(2)(OTf)(CH(2)Cl(2))(H(2)-(Ph)tropp(Ph))(2)] could be isolated and contains two hydrogenated monodentate H(2)-(Ph)tropp(Ph) phosphanes, one CH(2)Cl(2) molecule, one triflate anion, and two hydrides. Based on this structure and extensive NMR spectroscopic studies, a mechanism for the hydrogenation reactions is proposed.     

纳米固体超强酸TiO2/SO42-的制备及其催化甲苯选择性硝化

采用溶胶-凝胶法制备了新型的纳米固体超强酸催化剂TiO2/SO42-,并用XRD、TEM进行了表征。结果表明:所研制的TiO2/SO42-催化剂为晶态纳米粒子,平均粒径为34 nm,分散性较好;以纳米固体超强酸催化剂TiO2/SO42-为催化剂时,甲苯硝化的区域选择性和活性提高。找出最佳反应条件为:催化剂活化温度600℃,反应温度60℃,n(硝酸)/n(甲苯)=2,w(甲苯)/w(催化剂)=35,反应时间4h,甲苯转化率为87.4%,对位硝基甲苯与邻位硝基甲苯之比(P/O)可达1.52。     

层状材料及催化

LDHs（1ayered double hydroxides）是一类结构可调的阴离子层状及插层结构功能材料,近些年来在催化领域得到了广泛的关注．本文综述了有关LDHs材料构筑原则的理论研究、组装方法及其在多相催化领域应用的最新进展．