Image guide couplers used in millimeter wave integrated circuits

The dispersion and coupling characteristics of the coupled image guides are studied by using the odd-even mode principle and effective dielectric constant method. The practical design of the image guide directional couplers is presented. The experiments of 3-dB and 10-dB couplers in ka band show several good features which are very useful to millimeter wave integrated circuits with flat coupling, easy design and fabrication, mechanical stability and low losses.     

Characteristic impedance of nonradiative dielectric waveguide and its application

In this paper a formula for determining the characteristic impedance of the nonradiative dielectric waveguide (NRD-guide) is presented. The numerical results are obtained, which are very useful for designing NRD waveguide components, such as impedance transformers, filters, branch-line hybrids, and active circuits. As a practical example for applying the formula, a 3 dB brainched NRD-guide directional coupler was designed and fabricated. The experiments show good consistency with the theory.     

Graphical Representation of the Supermode Theory of a Waveguide Directional Coupler

A novel graphical representation of the supermode theory of a waveguide directional coupler based on phasor analysis is described. Following this approach, dependence of the magnitudes and phases of the output fields on the splitting ratio of a directional coupler is discussed. Both the cases of phase-matched (identical) and non-phase-matched (non-identical) waveguides constituting a directional coupler are investigated. This approach directly illustrates the fact that the phase shift suffered by the coupled light relative to the throughput light is π/2, regardless of the splitting ratio for identical guides, which is not the case for couplers with non-identical waveguides. It also yields additional information about the phases of the output fields of a directional coupler. The usefulness of this approach in the context of wavelength-flattened couplers, wavelength division multiplexing couplers, and polarization effects in directional couplers is also discussed. This approach should also be helpful in the analysis of guided wave interferometric devices such as wavelength interleave filters and modulators, based on concatenated directional couplers.     

Determination and stability analysis of the supermodes in nonlinear directional couplers through a variational approach

The even and the odd supermodes of nonlinear directional couplers are determined by means of a variational approach; both slab and channel nonlinear couplers are considered. The validity of the solutions given by the analytical method and their stability properties are analysed through numerical integration of the governing equations. It is shown that channel nonlinear directional couplers improve the stability of the eigenmodes.     

Crosstalks of two-waveguide and three-waveguide directional couplers

Crosstalks of two-waveguide and three-waveguide directional couplers are analyzed mathematically based on the relationship between the coupled mode and the normal mode. Numerical techniques such as the finite-difference method and the beam propagation method are employed to confirm the validity of the derived expressions. The calculation results show that two-waveguide directional coupler is superior to any type of three-waveguide couplers from the practical viewpoint of the crosstalk and the coupling length.     

光脉冲在半导体中非线性传输特性的时域和频域分析

本文从理论上研究了半导体非共振透明区光脉冲非线性传输的时域和频域行为,并对应用自由载流子非线性折射效应来构造非线性方向耦合器的可能性进行了分析。     

仅有相邻波导耦合的定向耦合器的一般解法

应用切比雪夫多项式 ,求得了仅有相邻波导耦合的 (N +1)× (N +1)定向耦合器在弱耦合、无损耗和忽略正交偏振模场分量间耦合的情形下波导耦合方程的通解。列出线形排列 2× 2 ,3× 3,4× 4定向耦合器的解的表达式 ,并对环形排列 3× 3定向耦合器的解作了较详细的分析     

Effect of wall tilt on the optical properties of integrated directional couplers

The effect of wall tilt on the performance of directional couplers has been studied. There is a significant reduction in the coupling length as the tilt decreases when nonvertical walls, which are inherent in nearly all clean-room waveguide fabrication processes, are considered. Comparison of 90 degrees and 45 degrees coupling lengths reveals a difference of nearly a factor of 2 between them. Experimental data obtained with antiresonant reflecting optical waveguide directional couplers confirm that tilt effects should be considered in any device with large core thickness.     

Characteristic analysis of a directional coupler in horizontal multiple-slotted silicon wires with slanted sidewalls

The characteristics of the directional couplers based on the horizontal multiple-slotted waveguides with slanted sidewalls are analyzed in detail by using a mode solver based on the full-vectorial finite element method with perfectly matched layers absorbing boundary conditions. The coupling length of the directional coupler as functions of the structural parameters including waveguide spacing, sidewalls angle, the thickness and refractive index of the slot regions, both in quasi-TE and quasi-TM modes, is obtained. The effective indexes and the field distributions of the even and odd modes also are presented. The numerical results show that polarization-independent directional couplers can be realized by properly choosing structural and material parameters.     

圆波导定向耦合器在高功率微波测量中的应用

介绍了大功率容量定向耦合器的设计、标定、测试与应用情况。以X波段圆波导定向耦合器为例,在9.2~10.2 GHz的频带范围内,基于小孔耦合理论优化设计的结构,其耦合度可以稳定在(55±2)dB以内,隔离度大于80 dB。在此基础上,设计加工了X波段圆波导定向耦合器并进行了标定测试,测试与仿真结果吻合较好,高功率微波实验证实了其具有较高功率容量,能够满足实验需求。该类圆波导定向耦合器已广泛应用于实验室高功率微波源的在线测量装置中。     

A Novel UWB Antenna with Small Side-Leakage

A successful design for a UWB (ultra-wideband antennas) antenna based on NRD-guide (nonradiative dielectric waveguide) with small side-leakage is presented. The rule of the theoretical selection of its parameters, if NRD-guide is used as the UWB antennas, is studied firstly, then the temporal propagation characteristics of the NRD-guide and the radiation characteristics for an tapered open-ended NRD-guide are calculated by FDTD (finite-difference time-domain) method.     

Non-radiative phenomenon in couple dielectric guide

The solutions of electromagnetic field equations for non-radiative coupled dielectric guides are derived using mode matching technique. Dispersion curves are plotted for various dielectric materials and dimensional parameters. The non-radiative phenomenon in the coupled dielectric guide has been discussed in detail. The hybrid directional couplers in the above configuration have been theoretically designed by computing the normalized propagation constants. The superiority of such directional couplers is discussed.     

Adjustment of the coupling ratio by laser ablation of Ti:LiNbO3 directional couplers

The coupling ratio of directional couplers in Z-cut Y-propagation and X-cut Z-propagation LiNbO₃ crystals was adjusted by laser ablation. The coupling ratio change is more efficient for the TM-mode of Z-cut couplers. The method can be used to correct the uncertainty of the coupling ratio for directional couplers that occurs during fabrication process.     

常用微波衰减器脉冲功率容量测试

提出了一种微波衰减器脉冲功率容量的测试方法,该方法可概括为利用定向耦合器组测试比对法,测试系统主要由微波源、定向耦合器组、衰减器、检波器及示波器等器件及设备组成。选取了广泛应用于高功率微波测试系统的波导衰减器及同轴衰减器进行了功率容量测试。初步测试结果表明:在X波段,对于μs量级脉冲宽度的单脉冲,衰减材料为羟基铁的BJ-100矩形波导式衰减器的脉冲功率容量可达50 kW,厚膜电阻为衰减材料的N型接头的同轴式衰减器的功率容量可达10 kW以上。     

Variational analysis of directional couplers with graded index profile

A variational analysis of graded optical directional couplers is presented. Fabrication of such directional couplers by an electron-beam writing method has recently been reported. We have shown that our analysis gives better results than the WKB method which has been used previously to analyse such couplers. Further, our analysis involves much less algebraic and numerical work than the WKB method.     

Circuit-oriented modelling of ring-resonators

In this work we propose a circuit-based analysis of both a ring phase shifter and a single ring filter, taking into account the effects of imperfections in the directional couplers and polarization conversion in bent waveguides. New models for the directional coupler and for the bent waveguide are proposed and used to find an analytical expression of the transfer functions of ring based devices. The numerical results obtained with the new models show that defects in directional couplers and polarization conversion in bent waveguides are responsible of spectral impairments often observed experimentally, confirming the validity of the model.     

Coupling coefficients evaluation of a directional coupler using gain guided and index antiguided fibers

In this paper, we have investigated the mutual and self coupling characteristics of directional couplers using two individual gain guided and index antiguided fibers, which can deliver robust single mode operation with large mode area, respectively owing to the combined adequately large gain coefficients in the core; Some interesting and distinguishing properties from conventional index guided fiber couplers are obtained that: The variations of coupling coefficients are complex-valued and spatially damping oscillated, but not exponential-like decreasing as conventional index guided couplers.     

Effective index method for planar lightwave circuits containing directional couplers

A simple and intuitive effective index method for planar lightwave circuits containing directional couplers is proposed. The optimal cladding refractive index of the effective two-dimensional planar waveguide is found according to the coupling length of the directional coupler involved. Numerical examples indicate that this proposed effective index method gives accurate results while saving significant computation time in simulation and design of planar lightwave circuits containing directional couplers.     

Semi-Analytical Simulation of Titanium-Indiffused Lithium Niobate-Integrated Optic Directional Couplers Consisting of Curved Waveguides

Integrated optic directional couplers consisting of curved waveguides are simulated analytically by solving the Riccati equation. The coupling coefficient between the curved waveguides with a parabolically varying gap and the condition of total power transfer between the waveguides are derived. In order to compute the overall coupling coefficient and hence the power distribution along the waveguides for Ti:LiNbO₃ curved waveguide directional couplers, the coupling coefficient for straight waveguide couplers is computed for different gaps using the effective-index-based matrix method (EIMM). Finally, the power distribution in the curved waveguides along the length is computed. The method is mostly analytical except the effective-index method and is computationally simple.     

Wavelength division with three-dimensional couplers fabricated by filamentation of femtosecond laser pulses

Refractive-index changes can be induced by filamentation of 800-nm, 1-kHz femtosecond laser pulses in silica glass. Two-dimensional translation of a 40-microm-long filament leads to the formation of a curved waveguide because of bending by the previously induced refractive-index change. The fabrication of 2-mm directional couplers to split the coupled beam into 1:1 at a wavelength of 632.8 nm is demonstrated. The realization of three-dimensional directional couplers and wavelength division in the output from the couplers is also demonstrated.