Self-assembly and encoding of polymer-stabilized gold nanoparticles with surface-enhanced Raman reporter molecules

Polymer-stabilized gold nanoparticles (AuNPs) were prepared and encoded with a range of surface-enhanced Raman reporter molecules. A range of as-synthesized polymers produced by reversible addition fragmentation chain transfer (RAFT) polymerization were demonstrated to self-assemble at the surface of AuNPs dispersed in water. The method involved the coprecipitation of polymer-gold conjugates by the addition of polymer dissolved in a water-miscible solvent to gold AuNPs dispersed in water. This method represents a simplification of the preparation of polymer-stabilized AuNPs compared with other published methods, in that the AuNPs do not need to be first transferred to an organic solvent. The process enabled the polymer stabilized AuNPs to be easily recovered by filtration or by phase transfer of the AuNPs to an organic solvent in which the RAFT polymer was soluble. The polymer-stabilized AuNPs were characterized by a range of methods including UV-visible spectrophotometry, transmission electron microscopy, thermogravimetric analysis, dynamic light scattering, and attenuated total reflection Fourier transform infrared spectroscopy. Furthermore, 1H pulsed field gradient spin echo NMR was utilized to characterize the self-diffusion of the polymer-stabilized AuNPs. Finally, we then demonstrated that these polymer-stabilized AuNPs maintained their ability to be encoded with surface-enhanced Raman spectroscopy reporter molecules.     

Structural organization of gold nanoparticles onto the ITO surface and its optical properties as a function of ensemble size

Self-assembly of citrate-stabilized gold nanoparticles (AuNPs) onto an optically transparent indium tin oxide (ITO) surface followed by neutralization of these particles using dodecanethiol as a surfactant have been demonstrated. X-ray photoelectron spectroscopic (XPS) studies revealed the partial removal of citrate ions from the immobilized AuNPs, which advances the dilution of electrostatic attraction between AuNPs and the APS (amino-terminated monolayer)-functionalized ITO surface. The resultant AuNPs restore their mobility to some extent and form small ensembles. Some of the immobilized AuNPs were completely removed from the surface due to neutralization, as confirmed by XPS studies. Interparticle distance and size of ensembles were manipulated by consecutive cycles of immobilization and neutralization of AuNPs. Controlled nanostructural fabrication progression, which leads to two-dimensional lateral growth of AuNPs, provides a method for systematically shifting the surface plasmon resonance band based on the increase in plasmon coupling among the closely placed AuNPs of an ensemble. The magnitude of shift increases with the size of ensemble. This manipulated chemical strategy offers a convenient and simple method to tune the optical properties of materials on a nanoscale.     

溶胶-凝胶法原位复合PVA/HA水凝胶的结构表征与性能研究

采用溶胶-凝胶原位复合的方法制备了聚乙烯醇/羟基磷灰石生物活性复合水凝胶,探讨了HA含量对复合水凝胶结构性能的影响,用X射线衍射分析、红外光谱分析、DSC、扫描电镜等方法对HA在PVA水凝胶体系中的晶态结构及分散状态进行了表征,并与物理共混复合法进行了比较.研究发现,采用溶胶-凝胶法原位复合可在PVA水凝胶中形成具有生物活性的HA结晶结构,且分散良好,分布均匀.HA粉体作为异相成核剂,促进了PVA水凝胶基体的结晶,提高了复合水凝胶的力学性能.     

Effect of freeze-thawing on lipid bilayer-protected gold nanoparticles

In this study, varieties of lipid bilayer-protected gold nanoparticles (AuNPs) were synthesized through a simple wet chemical method, and then the effect of freeze-thawing on the as-prepared AuNPs was investigated. The freeze-thawing process induced fusion or fission of lipid bilayers tethered on the AuNPs. The UV-vis spectra and transmission electron microscopy experiments revealed that the disruption of lipid bilayer structures on the nanoparticles led to the fusion or aggregation of AuNPs. The role of freeze-thawing in the evolution of lipid bilayer-protected AuNPs was studied. The addition of adequate sucrose, a well-known cryoprotectant, effectively prevented the fusion or aggregation of lipid bilayer-protected AuNPs undergoing the freeze-thawing process. The possible mechanism of sucrose preserving the integrity of the lipid bilayer-protected AuNPs was also discussed.     

Gold Nanoparticles Based Colorimetric Detection of Target DNA After Loop-mediated Isothermal Amplification

We have developed a rapid, simple and label-free colorimetric method for the identification of target DNA. It is based on loop-mediated isothermal amplification(LAMP). Plain gold nanoparticles(AuNPs) are used to indicate the occurrence of LAMP. The amplified product is mixed with AuNPs in an optimized ratio, at which the deoxyribonucleotides(dNTPs) bind to the AuNPs via ligand-metal interactions and thus enhance AuNPs stability. If a target DNA is amplified, the dramatic reduction of the dNTPs leads to the aggregation of AuNPs and a color change from red to blue. The success of the method strongly depends on the ionic strength of the solution and the initial concentration of dNTPs. Unlike other methods for the identification of isothermal products, this method is simple and can be readily applied on site where instrumentation is inadequate or even lacking.     

金纳米粒子膜的电化学合成及SERS活性分析

Surface-enhanced Raman scattering(SERS)-active gold nanoparticles(AuNPs) films were prepared with a one-step electrochemical method. The orthogonal design was used to investigate the experimental conditions influencing the morphologies and the SERS activity of the AuNPs. A condition was found to obtain the optimal SERS activity. The SEM study reveals that the AuNPs films were composed of closely packed AuNPs. The Finite Difference Time Domain(FDTD) simulation result indicates that the coupling between particles plays an important role in the enhancement SERS of AuNPs.     

Visual chiral recognition of tryptophan enantiomers using unmodified gold nanoparticles as colorimetric probes

A simple protocol to distinguish enantiomers is extremely intriguing and useful. In this study, we propose a low-cost, facile, sensitive method for visual chiral recognition of enantimers. It is based on the inherent chirality of gold nanoparticles (AuNPs), and the unmodified AuNPs are used as chiral selector for d- and l-Tryptophan (Trp). In the presence of d-Trp, an appreciable red-to-blue color change of AuNPs solution can be observed, whereas no color change is found in the presence of l-Trp. The method can be used to detect d-Trp in the range of 0.2–10 μM, and the limit of detection is 0.1 μM. The chiral assay described in this work is easily readout with the naked eye or using a UV-vis spectrometer. Furthermore, the AuNPs can selectively adsorb d-Trp, and simple centrifugation can allow the precipitation of d-Trp with AuNPs and leave a net excess of the other enantiomer in solution, thus resulting in enantioseparation. In this method, AuNPs do not need any labeling or modifying with chiral molecules. The method is more attractive because of its high sensitivity, low cost, ready availability and simple manipulation.     

Vibrational spectroscopic characterization of 4-acylamidobenzenethiol-stabilized gold nanoparticles

A simple preparation method of gold nanoparticles (AuNPs) with 4-acylamidobenzenethiol derivative (BD) was improved to obtain the larger size of AuNPs which exhibited localized surface plasmon resonance. The spectroscopic characterizations of two kinds of BD-stabilized AuNPs were carried out by means of ATR-FTIR and Raman spectroscopy in order to clarify the conformation and orientation of BDs adsorbed on AuNPs. The relation between the stability of AuNPs and the adsorbed states of BDs were also discussed. The average sizes of the resulting AuNPs were 18 nm for BD1 and 30 nm for BD2, respectively. It was found that the BD1-capped AuNPs formed large aggregates. The results of vibrational spectroscopy revealed that loosely packed self-assembled monolayer (SAM) of BD1 molecules was formed on the surface of the AuNPs; on the other hand, densely packed SAM was formed in the case of BD2. We concluded the difference behavior between the two types of molecules was caused by the functional groups. The sulfuryl groups of BD2 induced highly ordered SAM and suppressed aggregate formation of AuNPs.     

Synthesis of gold nanoparticles using herbal Acorus calamus rhizome extract and coating on cotton fabric for antibacterial and UV blocking applications

Gold nanoparticles (AuNPs) have been synthesized by greener method using chloroauric acid as precursor and extract of Acorus calamus rhizome as reducing agent. Formation of AuNP was confirmed by the presence of Surface Plasmon Resonance (SPR) peak in UV–Visible spectral analysis. XRD and FT-IR spectral analyses were performed for characterization. SEM images show spherical morphology and HR-TEM images reveal nanosize of AuNPs. The AuNPs were then coated on cotton fabric by pad-dry-cure method and characterized by SEM with EDAX technique. The results reveal the deposition of AuNPs on the surface of cotton fabric. Uncoated cotton, neat extract coated cotton and extract containing AuNPs coated cotton fabrics were then tested for antibacterial activity against Gram positive (Staphylococcus aureus) and Gram negative (Escherichia coli) bacterial strains by AATCC 100 test method. It showed that the extract containing AuNPs coated cotton fabric had higher antibacterial activity than other test samples against E. coli. UV-DRS analysis performed on extract containing AuNPs coated cotton fabric showed improved UV-blocking property than uncoated cotton fabric and neat extract coated cotton fabric.     

A simple visual method for DNA detection based on the formation of gold nanoparticles

A simple visual method for DNA detection during the formation of gold nanoparticles (AuNPs) was developed based on different electrostatic properties of single strand DNA (ssDNA) and double strand DNA (dsDNA). Since the ssDNA is easy to bind to AuNPs due to its exposed bases which could prevent salt-induced aggregation of AuNPs. The dsDNA always present negative charge because its negatively charged phosphate backbone is exposed. In this case, the dsDNA could disturb the adsorption between dsDNA and AuNPs and result in non-aggregation of AuNPs. After hybridization, chloroauric acid and ascorbic acid were added to the mixture solution, and the solution changed to red immediately and turned to purple in 10 min in the present of target DNA. TEM results confirmed that the change of color stemed from aggregation of AuNPs. In order to obtain accurate results by naked eye, the DNA detection assay should be conducted under pH 7.0.     

Label free colorimetric sensing of thiocyanate based on inducing aggregation of Tween 20-stabilized gold nanoparticles

Based on inducing the aggregation of gold nanoparticles (AuNPs), a simple colorimetric method with high sensitivity and selectivity was developed for the sensing of thiocyanate (SCN(-)) in aqueous solutions. Citrate-capped AuNPs were prepared following a classic method and Tween 20 was subsequently added as a stabilizer. With the addition of SCN(-), citrate ions on AuNPs surfaces were replaced due to the high affinity between SCN(-) and Au. As a result, Tween 20 molecules adsorbed on the AuNPs surfaces were separated and the AuNPs aggregated. The process was accompanied by a visible color change from red to blue within 5 min. The sensing of SCN(-) can therefore be easily achieved by a UV-vis spectrophotometer or even by the naked eye. The potential effects of relevant experimental conditions, including concentration of Tween 20, pH, incubation temperature and time, were evaluated to optimize the method. Under optimized conditions, this method yields excellent sensitivity (LOD = 0.2 μM or 11.6 ppb) and selectivity toward SCN(-). Our attempt may provide a cost-effective, rapid and simple solution to the inspection of SCN(-) ions in saliva and environmental aqueous samples.     

A simple visual method for DNA detection based on the formation of gold nanoparticles

A simple visual method for DNA detection during the formation of gold nanoparticles (AuNPs) was developed based on different electrostatic properties of single strand DNA (ssDNA) and double strand DNA (dsDNA). It could identify target DNA in 10 min.     

In situ synthesis of gold nanoparticles on porous polyacrylonitrile nanofibers for sensing applications

A simple and cost-effective method was reported to synthesize small size (6 nm) gold nanoparticles (AuNPs) on polyacrylonitrile (PAN) electrospun nanofibers (AuNPs/PAN). The formation of AuNPs is attributed to the in situ reduction of Au(III) to Au(0) by 4-(dimethylamino)benzaldehyde doped in the PAN nanofibers. Electrochemical impedance spectroscopy (EIS) and cyclic voltammetry (CV) confirmed that the AuNPs/PAN nanofibers showed good conductivity. The AuNPs/PAN nanofibers were used to immobilize tris(2,2'-bipyridyl)ruthenium(II) ions (Ru(bpy)(3)(2+)) to form an electrochemiluminescence (ECL) sensor. The AuNPs on the PAN nanofibers exhibited an excellent catalytic effect on the ECL of Ru(bpy)(3)(2+) which could be employed to detect low concentrations of phenolic compounds. The linear response range of the ECL sensor to hydroquinone is 0.55-37 μM with limit of detection of 80 nM (S/N = 3). This sensor has been successfully applied to determine the hydroquinone content in photographic developer samples. Our work provides a very simple and cost-effective method to synthesize AuNPs on polymer nanofibers which shows great potential in the field of electrocatalysis and chemo/biosensors.     

Controllable synthesis of water-soluble gold nanoparticles and their applications in electrocatalysis and surface-enhanced Raman scattering

We report a facile method to synthesize water-soluble gold nanoparticles (AuNPs) using a biosurfactant sodium cholate as reducing reagents and protective groups in aqueous solution at ambient temperature. The diameters (13-70 nm) of uniform AuNPs can be readily adjusted by changing the initial molar ratio of sodium cholate to chloroauric acid (HAuCl(4)). Also, the alkaline condition of preparative solution is found to affect the size of as-synthesized AuNPs. This synthetic approach is one-step and "green". The obtained AuNPs exhibit a good electrocatalytic activity toward methanol oxidation. Meanwhile, the AuNPs thin films can serve as an efficient substrate for surface-enhanced Raman scattering (SERS). Furthermore, platinum nanoparticles (PtNPs) are also prepared by reducing sodium tetrachloro platinate hydrate with sodium cholate.     

Use of alkaline or enzymatic sample pretreatment prior to characterization of gold nanoparticles in animal tissue by single-particle ICPMS

Inductively coupled plasma mass spectrometry in single-particle mode (spICPMS) is a promising method for the detection of metal-containing nanoparticles (NPs) and the quantification of their size and number concentration. Whereas existing studies mainly focus on NPs suspended in aqueous matrices, not much is known about the applicability of spICPMS for determination of NPs in complex matrices such as biological tissues. In the present study, alkaline and enzymatic treatments were applied to solubilize spleen samples from rats, which had been administered 60-nm gold nanoparticles (AuNPs) intravenously. The results showed that similar size distributions of AuNPs were obtained independent of the sample preparation method used. Furthermore, the quantitative results for AuNP mass concentration obtained with spICPMS following alkaline sample pretreatment coincided with results for total gold concentration obtained by conventional ICPMS analysis of acid-digested tissue. The recovery of AuNPs from enzymatically digested tissue, however, was approximately four times lower. Spiking experiments of blank spleen samples with AuNPs showed that the lower recovery was caused by an inferior transport efficiency of AuNPs in the presence of enzymatically digested tissue residues.     

Facile green synthesis of gold nanoparticles using leaf extract of antidiabetic potent Cassia auriculata

A simple biological method for the synthesis of gold nanoparticles (AuNPs) using Cassia auriculata aqueous leaf extract has been carried out in the present study. The reduction of auric chloride led to the formation of AuNPs within 10 min at room temperature (28°C), suggesting a higher reaction rate than chemical methods involved in the synthesis. The size, shape and elemental analysis were carried out using X-ray diffraction, TEM, SEM-EDAX, FT-IR and visible absorption spectroscopy. Stable, triangular and spherical crystalline AuNPs with well-defined dimensions of average size of 15-25 nm were synthesized using C. auriculata. Effect of pH was also studied to check the stability of AuNPs. The main aim of the investigation is to synthesize AuNPs using antidiabetic potent medicinal plant. The stabilizing and reducing molecules of nanoparticles may promote anti-hyperglycemic if tested further.     

Ultrasensitive colorimetric detection of heparin based on self-assembly of gold nanoparticles on graphene oxide

A novel colorimetric method was developed for ultrasensitive detection of heparin based on self-assembly of gold nanoparticles (AuNPs) onto the surface of graphene oxide (GO). Polycationic protamine was used as a medium for inducing the self-assembly of citrate-capped AuNPs on GO through electrostatic interaction, resulting in a shift in the surface plasmon resonance (SPR) absorption of AuNPs and exhibiting a blue color. Addition of polyanionic heparin disturbed the self-assemble of AuNPs due to its strong affinity to protamine. With the increase of heparin concentration, the amounts of self-assembly AuNPs decreased and the color changed from blue to red in solution. Therefore, a "blue-to-red" colorimetric sensing strategy based on self-assembly of AuNPs could be established for heparin detection. Compared with the commonly reported aggregation-based methods ("red-to-blue"), the color change from blue to red was more eye-sensitive, especially in low concentration of target. Moreover, stronger interaction between protamine and heparin led to distinguish heparin from its analogues as well as various potentially coexistent physiological species. The strategy was simply achieved by the self-assembly nature of AuNPs and the application of two types of polyionic media, showing it to be label-free, simple, rapid and visual. This method could selectively detect heparin with a detection limit of 3.0 ng mL(-1) in standard aqueous solution and good linearity was obtained over the range 0.06-0.36 μg mL(-1) (R = 0.9936). It was successfully applied to determination of heparin in fetal bovine serum samples as low as 1.7 ng mL(-1) with a linear range of 0-0.8 μg mL(-1).     

基于DNA电化学发光传感器研究金纳米颗粒对量子点的电化学发光影响

纳米金颗粒具有高的消光系数和良好的表面等离子体共振特性, 其等离子体共振特性受纳米金颗粒的尺寸和周围环境等因素的影响. 本文基于半导体纳米晶电化学发光信号对金纳米颗粒的距离依赖性制备了DNA电化学发光传感器. 首先利用循环伏安法(CV)在玻碳电极(GCE)表面原位沉积金纳米颗粒(AuNPs), 巯基丙酸包裹的CdS量子点(QDs)与氨基修饰的双链DNA (dsDNA)通过酰胺键缩合, 形成量子点修饰的双链DNA(QDs-dsDNA). 最后将QDs-dsDNA 通过dsDNA 另一端的巯基组装到纳米金表面, 得到CdS QDs-DNA/AuNPs/GCE电化学发光传感器. 在优化电极表面QDs-dsDNA密度、金纳米颗粒沉积方法等实验条件的基础上, 对不同传感器的表面性质进行了表征, 如形貌和电化学阻抗等. 进一步通过控制纳米金和CdS QDs之间的DNA研究了纳米金对CdS QDs发光信号的影响作用. 结果显示DNA链的长度和类型对发光信号有着重要的影响. 最后将此传感器用于环境污染物的DNA损伤检测, 显示出很好的灵敏响应.     

Glucose detection at attomole levels using dynamic light scattering and gold nanoparticles

Glucose is directly related to brain activity and to diabetes.Therefore,developing a rapid and sensitive method for glucose detection is essential.Here,label-free glucose detection at attomole levels was realized by detecting the average diameter change of gold nanoparticles(AuNPs)utilizing dynamic light scattering(DLS).Single-strand DNA(ssDNA)adsorbed into the AuNPs’surfaces and prevented them from aggregating in solution that contained NaCl.However,ssDNA cleaved onto ssDNA fragments upon addition of glucose,and these fragments could not adsorb onto the AuNPs’surfaces.Therefore,in high-salt solution,AuNPs would aggregate and their average diameter would increase.Based on monitoring the average diameter of AuNPs with DLS,glucose could be detected in the range from 15 pmol/L to 2.0 nmol/L,with a detection limit of 8.3 pmol/L.Satisfactory results were also obtained when the proposed method was applied in human serum glucose detection.     

组装在贵金属基底上的金纳米粒子对CO的电化学催化氧化

研究了组装在Au, Pt电极表面的金纳米粒子对CO的电化学催化氧化行为, 首次在实验上观察到较大粒径金纳米粒子(粒径＞10 nm)对CO的电催化氧化活性. 考察了金粒子表面金氧化物对粒子电催化活性的影响, 发现表面金氧化物的形成是金纳米粒子对CO具有电催化氧化活性的前提. 对于相同粒径的金纳米粒子, 随着粒子表面金氧化物量的增加,催化活性增大.