近邻层对相邻层界面能的影响

本文采用密度泛函理论比较了三层异质结(石墨烯/石墨烯/石墨烯,石墨烯/石墨烯/氮化硼和氮化硼/石墨烯/氮化硼)和双层异质结(石墨烯/石墨烯,石墨烯/氮化硼)的结合能和广义堆垛能的差异,以研究近邻层的影响. 由于近邻层的影响,相邻层结合能会有从-2.3%到22.55%的变化,但层间距的变化很小. 此外近邻层也会影响相邻层的广义堆垛能,变化值从-2%到10%,具体的变化值依赖于相邻层的性质.     

纳米石墨烯片-正十八烷复合相变材料制备及热物性研究

本文分别制备了纳米石墨烯片质量分数为0%, 0.5%, 1%, 1.5%, 2%的纳米石墨烯片-正十八烷复合相变材料,并通过扫描电镜测试、红外光谱分析、差示扫描量热实验及导热分析等实验对其形貌结构及热物性进行表征和研究.实验表明本文制备的纳米石墨烯-正十八烷复合相变材料具有很好的相变稳定性;当纳米石墨烯片的质量分数达到2%时,复合相变材料的导热系数相对于纯十八烷高出了89.4%.     

金属Ni原子对石墨烯生长结构的影响

基于Material Studio软件平台,利用分子动力学方法,对Ni原子与石墨烯层状结构相互作用和晶体结构变化过程进行模拟分析,得到如下结论：低浓度Ni原子会吸附在石墨烯表面层沿边缘生长,活性从中心向边缘逐渐降低,高浓度的Ni原子会溶解到内层石墨烯中.当石墨烯层数增加,附着在表层石墨烯的Ni原子生长排列范围扩大,且在石墨烯表面形成的点阵排列被破坏,附着在内层石墨烯的Ni原子比表层石墨烯Ni原子排列更散乱,同时石墨烯生长结构逐渐出现弯曲;随着层数增多和Ni原子浓度增加,石墨烯的拉伸强度也随之增加,石墨烯生长缺陷的偏转角度也随之增大.通过计算以上结构的径向分布函数(RDF),验证了石墨烯长程有序到短程有序的结构变化过程.     

石墨烯气凝胶复合相变材料的热物性研究

相变材料利用其相变潜热能力可吸收储存和释放利用热量,同时在相变过程中其温度浮动小,能够实现温度控制从而用于热管理.但是其低热导率和易泄露问题严重制约了其性能.石墨烯气凝胶因其丰富的多孔结构而具有较大的比表面积,可吸附相变材料解决其泄露问题,同时石墨烯的高导热系数可提高相变材料的热导率.这里选取正十八烷为相变材料,制备了不同质量分数的石墨烯气凝胶复合相变材料.测得石墨烯气凝胶含量为13.99 wt%的样品,其导热系数比纯正十八烷高出306.2%,熔化潜热和凝固潜热分别下降了13.8%和10.8%.分子动力学模拟结果表明,石墨烯气凝胶的引入会在一定程度上增强正十八烷分子的有序性和一致性,即在同一温度下复合相变材料中的正十八烷分子比纯正十八烷分子拥有更集中分布的末端距和扭转角,径向分布函数和自扩散系数都相对较低,说明石墨烯材料的引入可以提升正十八烷的导热系数.     

金属衬底上高质量大面积石墨烯的插层及其机制

石墨烯作为一种新型二维材料,因其优异的性质,在科学和应用领域具有非常重要的意义.而其超高的载流子迁移率、室温量子霍尔效应等,使其在信息器件领域备受关注.如何获得高质量并且与当代硅基工艺兼容的石墨烯功能器件,是未来将石墨烯应用于电子学领域的关键.近年来,研究人员发展了一种在外延石墨烯和金属衬底之间实现硅插层的技术,将金属表面外延石墨烯高质量、大面积的特点与当代硅基工艺结合起来,实现了无需转移且无损地将高质量石墨烯置于半导体之上.通过系统的实验研究并结合理论计算,揭示了插层过程包含四个主要阶段:诱导产生缺陷、异质原子插层、石墨烯自我修复和异质原子扩散成膜,并证实了这一插层机制的普适性.拉曼和角分辨光电子能谱实验结果表明,插层后的石墨烯恢复了本征特性,接近自由状态.此外,还实现了多种单质元素的插层.不同种类的原子形成不同的插层结构,从而构成了多种石墨烯/插层异质结.这为调控石墨烯的性质提供了实验基础,也展现了该插层技术的普适性.     

Calculation of electron spectra and some problems in the thermodynamics of graphene layers

The expressions for the energy spectra of monolayer, bilayer, and multilayer graphene, as well as epitaxial graphene, are derived using the quantum Green’s functions method. Analytic expressions are obtained for the densities of states of these systems. It is shown that a bandgap can appear the spectrum of an epitaxial graphene bilayer. A number of problems in the thermodynamics of electrons in free and epitaxial graphene layers are considered as applications. Analytic expressions are obtained for the chemical potential and heat capacity in the limiting cases of low and high temperatures. Quantum oscillations of heat capacity in graphene are analyzed taking into account the Coulomb interaction. The Berry phase of epitaxial graphene is investigated.     

Raman Spectrum of Epitaxial Graphene on SiC （0001） by Pulsed Electron Irradiation

We report new Raman features of epitaxial graphene （EG） on Si-face 4H-SiC prepared by pulsed electron irradiation （PEI）. With increasing graphene layers, frequencies of G and 2D peaks show blue-shifts and approach those of bulk highly-oriented pyrolytic graphite. It is indicated that the EG is slightly tension strained and tends to be strain-free. Meanwhile, single Lorentzian line shapes are well fitted to the 2D peaks of EG on SiC（O001） and their full widths at half maximum decrease with the increasing graphene layers, which indicates that the multilayer EG on Si-face can also contain turbostratic stacking by our PEI route instead of only AB Bernal stacking by a traditional thermal annealing method. It is worth noting that the stacking style plays an important role on the charge carrier mobility. Therefore our findings will be a candidate for growing quality graphene with high carrier mobility both on the Si- and C-terminated SiC substrate. Mechanisms behind the features are studied and discussed.     

Quantum spin Hall and quantum valley Hall effects in trilayer graphene and their topological structures

The present study pertains to the trilayer graphene in the presence of spin orbit coupling to probe the quantum spin/valley Hall effect. The spin Chern-number C_s for energy-bands of trilayer graphene having the essence of intrinsic spin–orbit coupling is analytically calculated. We find that for each valley and spin, C_s is three times larger in trilayer graphene as compared to single layer graphene. Since the spin Chern-number corresponds to the number of edge states,consequently the trilayer graphene has edge states, three times more in comparison to single layer graphene. We also study the trilayer graphene in the presence of both electric-field and intrinsic spin–orbit coupling and investigate that the trilayer graphene goes through a phase transition from a quantum spin Hall state to a quantum valley Hall state when the strength of the electric field exceeds the intrinsic spin coupling strength. The robustness of the associated topological bulk-state of the trilayer graphene is evaluated by adding various perturbations such as Rashba spin–orbit(RSO) interaction αR, and exchange-magnetization M. In addition, we consider a theoretical model, where only one of the outer layers in trilayer graphene has the essence of intrinsic spin–orbit coupling, while the other two layers have zero intrinsic spin–orbit coupling.Although the first Chern number is non-zero for individual valleys of trilayer graphene in this model, however, we find that the system cannot be regarded as a topological insulator because the system as a whole is not gaped.     

Three Dimensional Branched Gold Nanostructures on Reduced Graphene Oxide Films Formed at a Liquid/Liquid Interface

Interfacing anisotropic gold nanostructures with graphene can open up new avenues for modifying the light–matter interaction of graphene. A chemical route is explored to synthesize branched gold nanostructures on reduced graphene oxide (rGO) layers by in situ reduction, assisted by binary surfactant mixtures containing tetraoctylammonium bromide with cetyltrimethy­lammonium bromide, sodium dodecylsulfate, or sodium citrate. The hybrid material self‐assembles at a liquid/liquid interface forming a free‐standing film. Electron microscopy studies reveal the morphology, microstructure, and crystallinity of the hybrids. The gold nanostructures are branched in three dimensions and possess various shapes, such as irregular stars, multipods, and spiky features, interspersed with rGO layers. The hybrids exhibit plasmon modes in the visible and near‐infrared region due to the shape anisotropy. The enhancement effect of the spiky features is also observed in the Raman spectra. The growth mechanism of the branched nanostructures is followed by kinetic studies and indicates that the formation of multiple twinned crystals is the key factor for branching.     

基于石墨烯的太赫兹波散射可调谐超表面

设计了一个可调谐的太赫兹超表面,由在随机反射超表面基底中嵌入可偏置的双层石墨烯构成,可以实现对太赫兹波散射特性的动态调控.全波仿真试验结果证实了所预期的超表面散射可调性能.通过增大偏置电压提升石墨烯的费米能级,使得该超表面的太赫兹波散射样式从漫反射逐渐向镜面反射过渡,从而实现散射特性的连续调控,且该超表面具有对电磁波极化角度不敏感的特点.这些特性使得该超表面能很好地融合到变化的环境中,在太赫兹隐身方面具有潜在的应用价值.     

Structural analysis of PTCDA monolayers on epitaxial graphene with ultra-high vacuum scanning tunneling microscopy and high-resolution X-ray reflectivity

Epitaxial graphene, grown by thermal decomposition of the SiC (0001) surface, is a promising material for future applications due to its unique and superlative electronic properties. However, the innate chemical passivity of graphene presents challenges for integration with other materials for device applications. Here, we present structural characterization of epitaxial graphene functionalized by the organic semiconductor perylene-3,4,9,10-tetracarboxylic dianhydride (PTCDA). A combination of ultra-high vacuum scanning tunneling microscopy (STM) and high-resolution X-ray reflectivity (XRR) is used to extract lateral and vertical structures of 0, 1, and 2 monolayer (ML) PTCDA on epitaxial graphene. Both Fienup-based phase-retrieval algorithms and model-based least-squares analyses of the XRR data are used to extract an electron density profile that is interpreted in terms of a stacking sequence of molecular layers with specific interlayer spacings. Features in the STM and XRR analysis indicate long-range molecular ordering and weak π–π* interactions binding PTCDA molecules to the graphene surface. The high degree of both lateral and vertical ordering of the self-assembled film demonstrates PTCDA functionalization as a viable route for templating graphene for the growth and deposition of additional materials required for next-generation electronics and sensors.     

石墨烯层间纳米摩擦性质的第一性原理研究

基于密度泛函理论的第一性原理计算方法研究了纳米尺度下石墨烯层间摩擦现象, 探讨了对称和非对称两种情况下双层石墨烯层间沿不同方向的摩擦性质. 研究发现对于对称的双层石墨烯, 层间摩擦沿不同方向同性; 摩擦因数依赖于正压力, 随正压力增大, 摩擦因数的变化曲线分为三个阶段, 在较小以及较大压力下, 摩擦因数遵循Amonton法则不随压力变化而变化; 而在中间3-6 nN阶段, 摩擦因数随压力增加线性增加. 整个研究压力范围内摩擦因数在0.05-0.25之间. 对于非对称性双层石墨烯层间摩擦, 不同压力下摩擦因数在0.006上下波动, 摩擦因数较两层对称性石墨烯大大降低. 上述研究结果与实验一致.     

Modeling of Phase Transitions of Graphites to Diamond-Like Phases

The method of the density functional theory is used to study structural transformations between graphites and diamond-like phases. The calculations have been carried out in two approximations: a local density approximation and a generalized gradient approximation. It is found that the phase transitions of hexagonal graphene layers to a cubic diamond and diamond-like phases must occur at uniaxial compressions of ~57–71 GPa, whereas some diamond-like phases can be obtained from tetragonal graphene layers at significantly lower pressures of 32–52 GPa. The X-ray diffraction patterns have been calculated for the phase transition of graphite I4₁/amd to tetragonal LA10 phase that takes place at the minimum pressure that can be used for experimental identification of these compounds.     

Influence of disorder on the magnetism of graphene bilayers

We numerically calculate the impact of site-energy disorder on the magnetism of biased bilayer graphene formed with the Bernal stacking. By using the mean-field method, we approximately solve the Hubbard Hamiltonian and calculate the average magnetization of the two layers, which indicates that the disorder does not change the nature of the first-order phase transition between paramagnetism and ferromagnetism, but may increase the critical interaction strength U_c of the Hubbard Hamiltonian for the system to become the ferromagnetic phase. We also calculate the dependencies of relevant physical quantities on temperature. The implications of the results are discussed.     

Instability of dipole magnetoexcitons in quantum wells' and graphene superlattices

We propose the Bose-Einstein condensation and superfluidity of quasi-two-dimensional spatially indirect magnetobiexcitons in a slab of superlattice with alternating electron and hole layers consisting from the semiconducting quantum wells (QWs) and graphene superlattice in high magnetic field. For this system the instability of the ground state of interacting two-dimensional indirect magnetoexcitons in a slab of superlattice with alternating electron and hole layers in high magnetic field is found. The density of superfluid component ns(T) and the temperature of the Kosterlitz-Thouless phase transition to the superfluid state in the system of two-dimensional indirect magnetobiexcitons, interacting as electrical quadrupoles, are obtained for both QW and graphene realizations.     

扭转双层石墨烯物理性质、制备方法及其应用的研究进展

石墨烯是一种准二维蜂窝网状结构新型纳米材料,石墨烯的层数和构型对其性能产生重要影响.固体中准粒子的量子状态由其本身的对称性质所决定,扭转双层石墨烯打破了对称性,引起了强烈的层间耦合作用,改变了扭转双层石墨烯的电子能带、声子色散、形成能垒等物性,产生了独特的性能,如可以连续调控带隙0-250 meV,光电效应的响应度相比于单层石墨烯提高了80倍,因此对扭转双层石墨烯功能化研究有重大意义.本文同时还论述了扭转双层石墨烯向类金刚石转变的理论与实验研究进展,发现扭转双层石墨烯呈现出具有类金刚石结构与性能特征.进一步阐述调控扭转双层石墨烯的扭转角度对其内在性能的影响,揭示这种新型纳米结构在原子层次的行为特征.最后介绍了如何调控制备扭转双层石墨,分析其调控机理,讨论了各种制备工艺的不足与发展趋势.因此本文从扭转双层石墨烯的输运性质、晶体结构转变、制备三个方面展开阐述,并对其在先进电子器件领域的潜在应用进行了展望.     

Geometry and temperature effects of the interfacial thermal conductance in copper- and nickel-graphene nanocomposites

Graphene has excellent mechanical, electrical and thermal properties. Recently, graphene-metal composites have been proposed as a means to combine the properties of metals with those of graphene, leading to mechanically, electrically and thermally functional materials. The understanding of metal-graphene nanocomposites is of critical importance in developing next-generation electrical, thermal and energy devices, but we currently lack a fundamental understanding of how their geometry and composition control their thermal properties. Here we report a series of atomistic simulations, aimed at assessing the geometry and temperature effects of the thermal interface conductance for copper- and nickel-graphene nanocomposites. We find that copper-graphene and nickel-graphene nanocomposites have similar thermal interface conductances, but that both cases show a strong performance dependence on the number of graphene layers between metal phases. Single-graphene-layer nanocomposites have the highest thermal interface conductance, approaching ~500 MW m(-2) K(-1). The thermal interface conductance reduces to half this value in metal-bilayer graphene nanocomposites, and for more than three layers of graphene the thermal interface conductances further reduces to ~100 MW m(-2) K(-1) and becomes independent with respect to the number of layers of graphene. This dependence is attributed to the relatively stronger bonding between the metal and graphene layer, and relatively weaker bonding between graphene layers. Our results suggest that designs combining metal with single graphene layers provide the best thermal properties.     

Adsorption and desorption of fullerene on graphene/SiC(0001)

Adsorption and desorption of fullerene on a single layer of graphene grown on SiC(0001) were investigated by photoemission spectroscopy (PES). No significant change in the band structure of graphene was observed after fullerene deposition on the graphene layer under vacuum conditions, and subsequent exposure to the air. After annealing the fullerene layer at 275 °C in a vacuum, complete desorption of fullerene was observed without any resulting damage to the graphene structure. The desorption temperature of fullerene was significantly higher than that of pentacene, indicating that fullerene layers show higher stability than pentacene as protection layers of graphene-based devices.     

不同基底石墨烯涂层的层间滑移减磨性能研究

石墨烯薄膜作为一种二维材料,是提高微/纳机电系统(MEMS/NEMS)摩擦力学性能的优异润滑剂.为了探究基底材料和石墨烯层数对其减磨性能的影响,本文通过在不同基底制备了不同层数的石墨烯涂层,利用原子力显微镜(AFM)实验和分子动力学(MD)仿真结合的方法,研究了石墨烯层数对减磨效应的影响.并且通过建立不同层数石墨烯涂层的摩擦性能分析模型,探究出石墨烯层间滑移是产生减磨的主要因素.结果表明:在不同载荷下,石墨烯涂层对硅基底和铜基底均有优异的减磨效果,摩擦力随着石墨烯层数的增加逐渐降低,当石墨烯层数大于10层时,达到最优99.3%的减磨效果.通过仿真分析发现,随着层数增加,石墨烯与基底的干摩擦转变为石墨烯的层间摩擦,并产生层间剪切滑移,石墨烯层间滑移是导致多层石墨烯优异减磨性能的主要因素.     

Secondary electron emission characteristics of graphene films with copper substrate

For modern and future circular accelerators, especially high-intensity proton synchrotrons or colliders, the electron cloud effect is a key issue. So, in order to reduce the electron cloud effect, exploring very low secondary electron yield (SEY) material or coating used in vacuum tubes becomes necessary. In this article, we studied the SEY characteristics of graphene films with different thicknesses which were deposited on copper substrates using chemical vapor deposition. The SEY tests were done at temperatures of 25℃ and vacuum pressure of (2-6)×10^-9 torr. The properties of the deposited graphene films were investigated by X-ray photoelectron spectroscopy (XPS) and Raman spectroscopy. The SEY curves show that the number of graphene layers has a great effect on the SEY of graphene films. The maximum SEY of graphene films decreases with the increase of the number of layers. The maximum SEY of 6-8 layers of graphene film is 1.25. These results have a great significance for next-generation particle accelerators.