Synthesis and activity of ruthenium alkylidene complexes coordinated with phosphine and N-heterocyclic carbene ligands

This paper reports the synthesis and characterization of a variety of ruthenium complexes coordinated with phosphine and N-heterocyclic carbene (NHC) ligands. These complexes include several alkylidene derivatives of the general formula (NHC)(PR(3))(Cl)(2)Ru=CHR', which are highly active olefin metathesis catalysts. Although these catalysts can be prepared adequately by the reaction of bis(phosphine) ruthenium alkylidene precursors with free NHCs, we have developed an alternative route that employs NHC-alcohol or -chloroform adducts as "protected" forms of the NHC ligands. This route is advantageous because NHC adducts are easier to handle than their free carbene counterparts. We also demonstrate that sterically bulky bis(NHC) complexes can be made by reaction of the pyridine-coordinated precursor (NHC)(py)(2)(Cl)(2)Ru=CHPh with free NHCs or NHC adducts. Two crystal structures are presented, one of the mixed bis(NHC) derivative (H(2)IMes)(IMes)(Cl)(2)Ru=CHPh, and the other of (PCy(3))(Cl)(CO)Ru[eta(2)-(CH(2)-C(6)H(2)Me(2))(N(2)C(3)H(4))(C(6)H(2)Me(3))], the product of ortho methyl C-H bond activation. Other side reactions encountered during the synthesis of new ruthenium alkylidene complexes include the formation of hydrido-carbonyl-chloride derivatives in the presence of primary alcohols and the deprotonation of ruthenium vinylcarbene ligands by KOBu(t). We also evaluate the olefin metathesis activity of NHC-coordinated complexes in representative RCM and ROMP reactions.     

Ruthenium carbene complexes bearing an anionic carboxylate chelated to a hemilabile ligand

A series of bidentate ruthenium-based NHC complexes with the general formula [(H(2)IMes)(kappa(2)-L-COO)ClRu=CHPh)], where L is either PAr(3), HNR(2), or ROR, were prepared from commercially available [(H(2)IMes)(PCy(3))Cl(2)Ru(CHPh)] (2) and the appropriate ligand. The catalytic activities of the complexes were evaluated in ring-closing metathesis reactions. The type of donor ligand has a major impact on both the initiation behavior and also the stability of the complexes. Upon addition of CuCl to the reaction mixture the initiation is improved for the phosphine or amine containing chelates. For the P,O-chelate, the fast initiation was followed by decomposition. In the case of the N,O-containing chelate, a stable catalytic system was achieved. Trapping experiments support that the nitrogen lone-pair reversibly coordinates CuCl during the reaction.     

Model compounds of ruthenium-alkene intermediates in olefin metathesis reactions

The development of a model system to study ruthenium-olefin complexes relevant to the mechanism of olefin metathesis is reported. Upon addition of 1,2-divinylbenzene to (H2IMes)(py2)(Cl)2Ru=CHPh (H2IMes = 1,3-dimesityl-4,5-dihydroimidazol-2-ylidene), two ruthenium-olefin adducts are formed. On the basis of 1H NMR spectroscopy experiments and X-ray crystallographic analysis, these complexes are assigned as side-bound isomers in which the olefin and H2IMes ligands are coordinated cis to each other. The dynamic interconversion of these two ruthenium complexes was determined to have a barrier of 19.1 +/- 0.1 kcal/mol.     

Dithiocarboxylate complexes of ruthenium(II) and osmium(II)

The ruthenium(II) complexes [Ru(R)(κ(2)-S(2)C·IPr)(CO)(PPh(3))(2)](+) (R = CH=CHBu(t), CH=CHC(6)H(4)Me-4, C(C≡CPh)=CHPh) are formed on reaction of IPr·CS(2) with [Ru(R)Cl(CO)(BTD)(PPh(3))(2)] (BTD = 2,1,3-benzothiadiazole) or [Ru(C(C≡CPh)=CHPh)Cl(CO)(PPh(3))(2)] in the presence of ammonium hexafluorophosphate. Similarly, the complexes [Ru(CH=CHC(6)H(4)Me-4)(κ(2)-S(2)C·ICy)(CO)(PPh(3))(2)](+) and [Ru(C(C≡CPh)=CHPh)(κ(2)-S(2)C·ICy)(CO)(PPh(3))(2)](+) are formed in the same manner when ICy·CS(2) is employed. The ligand IMes·CS(2) reacts with [Ru(R)Cl(CO)(BTD)(PPh(3))(2)] to form the compounds [Ru(R)(κ(2)-S(2)C·IMes)(CO)(PPh(3))(2)](+) (R = CH=CHBu(t), CH=CHC(6)H(4)Me-4, C(C≡CPh)=CHPh). Two osmium analogues, [Os(CH=CHC(6)H(4)Me-4)(κ(2)-S(2)C·IMes)(CO)(PPh(3))(2)](+) and [Os(C(C≡CPh)=CHPh)(κ(2)-S(2)C·IMes)(CO)(PPh(3))(2)](+) were also prepared. When the more bulky diisopropylphenyl derivative IDip·CS(2) is used, an unusual product, [Ru(κ(2)-SC(H)S(CH=CHC(6)H(4)Me-4)·IDip)Cl(CO)(PPh(3))(2)](+), with a migrated vinyl group, is obtained. Over extended reaction times, [Ru(CH=CHC(6)H(4)Me-4)Cl(BTD)(CO)(PPh(3))(2)] also reacts with IMes·CS(2) and NH(4)PF(6) to yield the analogous product [Ru{κ(2)-SC(H)S(CH=CHC(6)H(4)Me-4)·IMes}Cl(CO)(PPh(3))(2)](+)via the intermediate [Ru(CH=CHC(6)H(4)Me-4)(κ(2)-S(2)C·IMes)(CO)(PPh(3))(2)](+). Structural studies are reported for [Ru(CH=CHC(6)H(4)Me-4)(κ(2)-S(2)C·IPr)(CO)(PPh(3))(2)]PF(6) and [Ru(C(C≡CPh)=CHPh)(κ(2)-S(2)C·ICy)(CO)(PPh(3))(2)]PF(6).     

Fluorous phase-transfer activation of catalysts: application of a new rate-enhancement strategy to alkene metathesis

Reactions of the bis(pyridine) complex (H2IMes)(Py)2(Cl)2Ru(=CHPh) and fluorous phosphines P(CH2CH2R(fn))3 (n = a, 6; b, 8; c, 10; R(fn) = (CF2)(n-1)CF3) give (H2IMes)(P(CH2CH2R(fn))3)(Cl)2Ru(=CHPh) (2a-c, 64-73%), which are analogs of Grubbs' second generation catalyst and effective alkene metathesis catalysts under organic monophasic and fluorous/organic biphasic conditions. The latter give rate accelerations, which are believed to arise from phase transfer of the dissociated fluorous phosphine.     

A general method for preparation of metal carbenes via solution- and polymer-based approaches

A new general, synthetically simple, and safe method for the preparation of metal carbene complexes, which is based on diphenyl sulfonium salts as carbenoid precursors, has been developed, and its scope and applications were studied. In general, deprotonation of a sulfonium salt with a base results in a sulfur ylide, which, in turn, reacts with an appropriate metal precursor to give the corresponding metal carbene complex. Thus, starting from benzyldiphenylsulfonium salt, the complexes (PCX)Rh=CHPh (X = P, N) were prepared in quantitative yield. Syntheses of Grubbs' catalyst, (PCy(3))(2)Cl(2)Ru=CHPh, and of Werner's carbene, [Os(=CHPh)HCl(CO)(P(i)Pr(3))(2)], were achieved by this method. Novel trans-bisphosphine Rh and Ir carbenes, ((i)Pr(3)P)(2)(Cl)M=CHPh, which could not be prepared by other known methods, were synthesized by the sulfur ylide approach. The method is not limited to metal benzylidenes, as demonstrated by the preparation of the Ru vinyl-alkylidene, (PCy(3))(2)Cl(2)Ru=CH-CH=CH(2), methoxycarbonyl-alkylidene, (PCy(3))(2)Cl(2)Ru=CH(CO(2)Me), and alkylidene (PCy(3))(2)Cl(2)Ru=CH(CH(3)), (PCy(3))(2)Cl(2)Ru=CH(2) compounds. The problem of recycling of starting materials as well as the issue of facile purification of the product metal carbene complex were addressed by the synthesis of a polymer-supported diarylsulfide, the carrier of the carbenoid unit in the process. Based on the sulfur ylide route, a methodology for the synthesis of metallocarbenes anchored to a polymer via the carbene ligand, using a commercial Merrifield resin, was developed.     

Decomposition of ruthenium olefin metathesis catalysts

The decomposition of a series of ruthenium metathesis catalysts has been examined using methylidene species as model complexes. All of the phosphine-containing methylidene complexes decomposed to generate methylphosphonium salts, and their decomposition routes followed first-order kinetics. The formation of these salts in high conversion, coupled with the observed kinetic behavior for this reaction, suggests that the major decomposition pathway involves nucleophilic attack of a dissociated phosphine on the methylidene carbon. This mechanism also is consistent with decomposition observed in the presence of ethylene as a model olefin substrate. The decomposition of phosphine-free catalyst (H2IMes)(Cl)2Ru=CH(2-C6H4-O-i-Pr) (H2IMes = 1,3-dimesityl-4,5-dihydroimidazol-2-ylidene) with ethylene was found to generate unidentified ruthenium hydride species. The novel ruthenium complex (H2IMes)(pyridine)3(Cl)2Ru, which was generated during the synthetic attempts to prepare the highly unstable pyridine-based methylidene complex (H2IMes)(pyridine)2(Cl)2Ru=CH2, is also reported.     

Mechanism and activity of ruthenium olefin metathesis catalysts: the role of ligands and substrates from a theoretical perspective

The reaction mechanism of olefin metathesis by ruthenium carbene catalysts is studied by gradient-corrected density functional calculations (BP86). Alternative reaction mechanisms for the reaction of the "first-generation" Grubbs-type catalyst (PCy(3))(2)Cl(2)Ru=CH(2) (1) for the reaction with ethylene are studied. The most likely dissociative mechanism with trans olefin coordination is investigated for the metathesis reaction between the "first-" and the "second-generation" Grubbs-type catalysts 1 and (H(2)IMes)(PCy(3))Cl(2)Ru=CH(2) (2) with different substrates, ethylene, ethyl vinyl ether, and norbornene, and a profound influence of the substrate is found. In contrast to the degenerate reaction with ethylene, the reactions with ethyl vinyl ether and norbornene are strongly exergonic by 8-15 kcal/mol, and this excess energy is released after passing through the metallacyclobutane structure. While the metallacyclobutane is in a deep potential minimum for degenerate metathesis reactions, the energy barrier for the [2+2] cycloreversion vanishes for the most exergonic reactions. On the free energy surface under typical experimental conditions, the rate-limiting steps for the overall reactions are then either metallacyclobutane formation for 1 or phosphane ligand dissociation for 2.     

Formation of dinuclear titanium and zirconium complexes by olefin metathesis--catalytic preparation of organometallic catalyst systems

The titanium complex [(C(5)H(4)bond;allyl)TiCl(3)] (2) undergoes olefin metathesis coupling when treated with 3 mol % of [Cl(2)(L(1))(L(2))Ru=CHPh] (L(1)=L(2)=PCy(3), 4 a; L(1)=PCy(3), L(2)=(H(2)IMes), 4 b) to yield the dimetallic complex [Cl(3)Ti(C(5)H(4))-CH(2)CH=CHCH(2)-(C(5)H(4))TiCl(3)] (5). The allyl-substituted titanocene complex [Cp(C(5)H(4)bond;allyl)TiCl(2)] (3) analogously yields the dimetallic system 6 when treated with 4. The ansa-zirconocene complex [Me(2)Si(C(5)H(4))(C(5)H(3)bond;allyl)ZrCl(2)] (7) cleanly yields the analogous dimetallic coupling product 8 (>95 % isomerically pure), when treated with catalytic amounts of 4 b in toluene. Complex 8 gives an active homogeneous ethene or propene polymerization catalyst, especially at elevated temperatures, when treated with excess methylalumoxane.     

Substituent effects and the mechanism of alkene metathesis catalyzed by ruthenium dichloride catalysts

Density functional theory calculations are reported concerning the dissociative mechanism for alkene metathesis by ruthenium dichloride catalysts, including both bisphosphine and diaminocarbene/phosphine complexes. The calculations use a hierarchy of models, ranging from [(L)(PH(3))Ru(Cl)(2)(CH(2))](L=PH(3) or diaminocarbene) through the larger [(L)(PMe(3))Ru(Cl)(2)(CHPh)] to the "real"[(L)(PCy(3))Ru(Cl)(2)(CHPh)]. Calculations show that the rate-limiting step for metathesis is either ring closing from an alkene complex to form a ruthena-cyclobutane, or ring-opening of the latter intermediate to form an isomeric alkene complex. The higher efficiency of the diaminocarbene based catalysts is due to the stabilization of the formal +iv oxidation state of the ruthenium centre in the metallacycle. This effect is partly masked in the smaller model systems due to a previously unnoticed stereoelectronic effect. The calculations do not reproduce the experimental observation whereby the initiation step, phosphine dissociation, is more energetically demanding and hence slower for the diaminocarbene-containing catalyst system than for the bisphosphine. Further calculations on the corresponding bond energies using a variety of DFT and hybrid DFT/molecular mechanics methods all find instead a larger phosphine dissociation energy for the bisphosphine catalyst. This reversed order of binding energies would in fact be the one expected based on the stronger trans influence of the diaminocarbene ligand. The discrepancy with experiment is small and could have a number of causes which are discussed here.     

Mechanism and activity of ruthenium olefin metathesis catalysts.

This report details the effects of ligand variation on the mechanism and activity of ruthenium-based olefin metathesis catalysts. A series of ruthenium complexes of the general formula L(PR(3))(X)(2)Ru=CHR(1) have been prepared, and the influence of the substituents L, X, R, and R(1) on the rates of phosphine dissociation and initiation as well as overall activity for olefin metathesis reactions was examined. In all cases, initiation proceeds by dissociative substitution of a phosphine ligand (PR(3)) with an olefinic substrate. All of the ligands L, X, R, and R(1) have a significant impact on initiation rates and on catalyst activity. The origins of the observed substituent effects as well as the implications of these studies for the design and implementation of new olefin metathesis catalysts and substrates are discussed in detail.     

Simply assembled and recyclable polymer-supported olefin metathesis catalysts

Polymer-supported ruthenium catalysts (PCy(3))(2)Ru(=C(H)Ph)Cl(2), (PCy(3))Ru(IMes)(=C(H)Ph)Cl(2), and (PCy(3))Ru(SIMes)(=C(H)Ph)Cl(2), where IMes = 1,3-bis(2,4,6-trimethylphenyl)imidazol-2-ylidene and SIMes = 1,3-bis(2,4,6-trimethylphenyl)-4,5-dihydroimidazol-2-ylidene, have been prepared and found to be effective "boomerang" catalysts for ring-closing metathesis. They are recyclable, show comparable or better reactivity than their homogeneous counterparts, tolerate functional groups, and perform very well with dienes and moderately well with highly hindered substrates.     

Decomposition of a key intermediate in ruthenium-catalyzed olefin metathesis reactions

Dinuclear ruthenium complex, with a bridging carbide and a hydride ligand, and methyltricyclohexylphosphonium chloride result from thermal decomposition of olefin metathesis catalyst, (IMesH2)(PCy3)(Cl)2Ru=CH2. Involvement of dissociated phosphine in the decomposition is proposed. The dinuclear complex has catalytic olefin isomerization activity, which can be responsible for competing isomerization processes in certain olefin metathesis reactions.     

Mechanism of ruthenium-catalyzed olefin metathesis reactions from a theoretical perspective

This paper presents a density functional theory study of the ruthenium-catalyzed olefin metathesis reactions. The ligand binding energy has been calculated in the first generation of Grubbs-type (PCy3)2Cl2Ru=CHPh (pre)catalyst, as well as in the heteroleptic (pre)catalytic systems in which a N-heterocyclic carbene, NHC, ligand substitutes a single phosphine. In agreement with experiments PCy3 coordinates more strongly to Ru in the heteroleptic (pre)catalysts than in the Grubbs-type (pre)catalyst. Moreover, ethene coordination and insertion into the Ru-alkylidene bond in the above-mentioned systems, as well as in the Hofmann type catalytic system with a cis-coordinated phosphane ligand, has been studied. The calculated insertion barrier for the NHC systems are lower than that of the (PCy3)2Cl2Ru=CHPh system. This is consistent with the higher activity experimentally observed for the NHC-based system.     

Concise synthesis of (S,S)-(+)-dehydrohomoancepsenolide

A concise total synthesis of the bis-butenolide 3 in optically active form is reported. Key steps are a zinc-mediated "three-component coupling" with formation of dienyne 9 which undergoes ring closing metathesis (RCM) on treatment with (PCy(3))(2)Cl(2)Ru=CHPh. Dimerization of the resulting butenolide 11 is then achieved via alkyne metathesis using (tBuO)(3)W&tbd1;CCMe(3) as the catalyst. A Lindlar reduction completes this synthesis which delivers product 3 in only five steps with an overall yield of 25%.     

Ruthenium-based olefin metathesis catalysts coordinated with unsymmetrical N-heterocyclic carbene ligands: synthesis, structure, and catalytic activity

A series of ruthenium-based olefin metathesis catalysts coordinated with unsymmetrical N-heterocyclic carbene (NHC) ligands has been prepared and fully characterized. These complexes are readily accessible in one or two steps from commercially available [(PCy(3))(2)Cl(2)Ru==CHPh]. All of the complexes reported herein promote the ring-closing of diethyldiallyl and diethylallylmethallyl malonate, the ring-opening metathesis polymerization of 1,5-cyclooctadiene, and the cross metathesis of allyl benzene with cis-1,4-diacetoxy-2-butene, in some cases surpassing in efficiency the existing second-generation catalysts. Especially in the cross metathesis of allyl benzene with cis-1,4-diacetoxy-2-butene, all new catalysts demonstrate similar or higher activity than the second-generation ruthenium catalysts and, most importantly, afford improved E/Z ratios of the desired cross-product at conversion above 60 %. The influence of the unsymmetrical NHC ligands on the initiation rate and the activation parameters for the irreversible reaction of these ruthenium complexes with butyl vinyl ether were also studied. Finally, the synthesis of the related chlorodicarbonyl(carbene) rhodium(I) complexes allowed for the study of the electronic properties of the new unsymmetrical NHC ligands that are discussed in detail.     

Ruthenium-olefin complexes: effect of ligand variation upon geometry

The development of a model system to study ruthenium-olefin complexes relevant to the mechanism of olefin metathesis has been reported recently. Upon addition of the ligand precursor 1,2-divinylbenzene to [RuCl(2)(Py)(2)(H(2)IMes)(==CHPh)] (H(2)IMes=1,3-dimesityl-4,5-dihydroimidazol-2-ylidene), two ruthenium-olefin adducts are formed. Based on (1)H NMR spectroscopy experiments and X-ray crystallographic analysis, these complexes are assigned as side-bound isomers in which the olefin and H(2)IMes ligands are coordinated cis to each other. Herein is reported an investigation of the generality of these observations through variation of the N-heterocyclic carbene ligand and the ligand precursor.     

Synthesis and activity of ruthenium olefin metathesis catalysts coordinated with thiazol-2-ylidene ligands

A new family of ruthenium-based olefin metathesis catalysts bearing a series of thiazole-2-ylidene ligands has been prepared. These complexes are readily accessible in one step from commercially available (PCy3)2Cl2Ru=CHPh or (PCy3)Cl2Ru=CH(o-iPrO-Ph) and have been fully characterized. The X-ray crystal structures of four of these complexes are disclosed. In the solid state, the aryl substituents of the thiazole-2-ylidene ligands are located above the empty coordination site of the ruthenium center. Despite the decreased steric bulk of their ligands, all of the complexes reported herein efficiently promote benchmark olefin metathesis reactions such as the ring-closing of diethyldiallyl and diethylallylmethallyl malonate and the ring-opening metathesis polymerization of 1,5-cyclooctadiene and norbornene, as well as the cross metathesis of allyl benzene with cis-1,4-diacetoxy-2-butene and the macrocyclic ring-closing of a 14-membered lactone. The phosphine-free catalysts of this family are more stable than their phosphine-containing counterparts, exhibiting pseudo-first-order kinetics in the ring-closing of diethyldiallyl malonate. Upon removing the steric bulk from the ortho positions of the N-aryl group of the thiazole-2-ylidene ligands, the phosphine-free catalysts lose stability, but when the substituents become too bulky the resulting catalysts show prolonged induction periods. Among five thiazole-2-ylidene ligands examined, 3-(2,4,6-trimethylphenyl)- and 3-(2,6-diethylphenyl)-4,5-dimethylthiazol-2-ylidene afforded the most efficient and stable catalysts. In the cross metathesis reaction of allyl benzene with cis-1,4-diacetoxy-2-butene increasing the steric bulk at the ortho positions of the N-aryl substituents results in catalysts that are more Z-selective.     

Ferrocene-containing [2]- and [3]rotaxanes. Preparation via an end-capping cross-metathesis reaction and electrochemical properties

Cross-metathesis reactions of terminal olefins with acrylic esters catalyzed by a Ru-carbene complex ((H2IMes)(PCy3)Cl2Ru = CHPh, H2IMes = N,N-bis(mesityl)-4,5-dihydroimidazol-2-ylidene) were applied to the end-capping of [2]pseudorotaxanes composed of dibenzo[24]crown-8 (DB24C8) and ferrocenylmethylammonium derivatives as the macrocyclic and axle components. A [3]rotaxane consisting of two DB24C8s and an axle molecule having ferrocenyl groups at both ends was obtained from the cross-metathesis reaction of two [2]pseudorotaxanes with Fe(C5H4CH2OCOCH = CH2)2. Cyclic voltammograms of the ferrocene-containing rotaxanes show reversible redox reactions whose potentials vary depending on the presence or absence of cationic dialkylammonium groups in the vicinity of the ferrocene units.     

Towards new organometallic wires: tetraruthenium complexes bridged by phenylenevinylene and vinylpyridine ligands

The tetranuclear complexes [{(PiPr(3))(2)(CO)ClRu(mu-CH=CHpy)Ru Cl(CO)(PPh(3))(2)}(2)(mu-CH=CH-C(6)H(4)- CH=CH-1,4)] (3 a) and [{(PiPr(3))(2)(CO)ClRu(mu-CH=CHpy)RuCl(CO)(PPh(3))(2)}(2)(mu-CH=CH-C(6)H(4)-CH=CH-1,3)] (3b), which contain vinylpyridine ligands that connect peripheral Ru(PiPr(3))(2)(CO)Cl units to a central divinylphenylene-bridged diruthenium core, have been prepared and investigated. These complexes, in various oxidation states up to the tetracation level, have been characterized by standard electrochemical and spectroelectrochemical techniques, including IR, UV/Vis/NIR and ESR spectroscopy. A comparison with the results for the vinylpyridine-bridged dinuclear complex [PiPr(3))(2)(CO)ClRu(mu-CH=CHpy)RuCl(CO)(PPh(3))(2)(CH=CHPh)] (6) and the divinylphenylene-bridged complexes [{(EtOOCpy)(CO)Cl(PPh(3))(2)Ru}(2)(mu-CH=CH-C(6)H(4)-CH=CH-1,4)] (8a) and [{(EtOOCpy)(CO)Cl(PPh(3))(2)Ru}(2)(mu-CH=CH-C(6)H(4)-CH=CH-1,3)] (8b), which represent the outer sections (6) or the inner core (8a,b) of complexes 3a,b, and with the mononuclear complex [(EtOOCpy)(CO)(PPh(3))(2)RuCl(CH=CHPh)] (7) indicate that every accessible oxidation process is primarily centred on one of the vinyl ligands, with smaller contributions from the metal centres. The experimental results and quantum chemical calculations indicate charge- and spin-delocalization across the central divinylphenylenediruthenium part of 3a,b or the styrylruthenium unit of 6, but not beyond. The energy gap between the higher lying styryl- or divinylphenylenediruthenium-based and the lower occupied vinylpyridineruthenium-based orbitals increases in the order 6<3 b<3 a and thus follows the conjugation within the non-heteroatom-substituted aromatic vinyl ligand.