Validation of a UV spectrophotometric method for the determination of melatonine in solid dosage forms

The aim of the work described in this paper was to provide a fast, easy, inexpensive, precise, and accurate method for the determination of melatonine in solid pharmaceutical dosage forms. The developed method is based on a UV first-derivative spectrophotometric determination, which exhibits excellent linearity in aqueous solutions (r2 = 0.996) for analyte concentrations of 1.5-4.5 mg/dL within a pH range of 5-9. Neither excipients present in the formulation nor indole adulterants, such as tryptophan (up to 5%), interfere with the assay. A study of variation parameters showed that sonication temperature was the main factor for successful determination. At temperatures of <45 degrees C, the sample dissolved completely, and accurate spectrophotometric measurements were obtained. A study was conducted of all the parameters established by the United States Pharmacopeia, 23rd Rev., to validate an analytical method for a solid pharmaceutical form, i.e., linearity, range, accuracy, precision, and specificity. All the parameters were in accordance with the acceptance criteria of the Comité de Guías Oficiales de Validación de la Dirección General de Control de Insumos para la Salud de Méjico. In addition, robustness and content uniformity tests were performed to substantiate the usefulness of the method.     

Parametric investigation of laser-induced fluorescence of solid-state uranyl compounds

The combination of remote/standoff sensing and laser-induced fluorescence (LIF) spectroscopy shows potential for detection of uranyl (UO2(2+)) compounds. Uranyl compounds exhibit characteristic emission in the 450-600 nm (22,200 to 16,700 cm(-1)) spectral region when excited by wavelengths in the ultraviolet or in the short-wavelength portion of the visible spectrum. We report a parametric study of the effects of excitation wavelength [including 532 nm (18,797 cm(-1)), 355 nm (28,169 cm(-1)), and 266 nm (37,594 cm(-1))] and excitation laser power on solid-state uranium compounds. The uranium compounds investigated include uranyl nitrate, uranyl sulfate, uranyl oxalate, uranium dioxide, triuranium octaoxide, uranyl acetate, uranyl formate, zinc uranyl acetate, and uranyl phosphate. We observed the characteristic uranyl fluorescence spectrum from the uranium compounds except for uranium oxide compounds (which do not contain the uranyl moiety) and for uranyl formate, which has a low fluorescence quantum yield. Relative uranyl fluorescence intensity is greatest for 355 nm excitation, and the order of decreasing fluorescence intensity with excitation wavelength (relative intensity/laser output) is 355 nm > 266 nm > 532 nm. For 532 nm excitation, the emission spectrum is produced by two-photon excitation. Uranyl fluorescence intensity increases linearly with increasing laser power, but the rate of fluorescence intensity increase is different for different emission bands.     

Solid-state UV laser-induced fluorescence detection in capillary electrophoresis

Two solid-state UV lasers were applied to the laser-induced fluorescence (LIF) detection of various groups of compounds after separation by capillary electrophoresis. These lasers are thermoelectric-cooled, highly compact, and inexpensive. Such lasers provide few mW of quasi-continuous wave (CW) power which are sufficient and stable for LIF detection. Native fluorescence detection of tryptophan-containing proteins and peptides and related indoles was achieved at the nM level with the laser operating at 266 nm. Detection of fluorescamine-labeled amino acids and peptides was also possible at the nM level with the laser operating at 355 nm. Amino acids at a concentration as low as 10 ng/mL could be labeled with fluorescamine. Solid-state UV-LIF detection of the tryptic digest of cytochrome c after fluorescamine derivatization was demonstrated.     

Resonance fluorescence spectroscopy in laser-induced cavitation bubbles

Laser-induced breakdown spectroscopy (LIBS) in liquids using a double-pulse Q-switched Nd:YAG laser system has provided reliable results that give trace detection limits in water. Resonant laser excitation has been added to enhance detection sensitivity. A primary laser pulse (at 532 nm), transmitted via an optical fiber, induces a cavitation bubble and shockwave at a target immersed in a 10 mg l⁻¹–100 mg l⁻¹ indium (In) water suspension. The low-pressure rear of the shockwave induces bubble expansion and a resulting reduction in cavity pressure as it extends away from the target. Shortly before the maximum diameter is expected, a secondary laser pulse (also at 532 nm) is fed into the bubble in order to reduce quenching processes. The plasma field generated is then resonantly excited by a fiber-guided dye laser beam to increase detection selectivity. The resulting resonance fluorescence emission is optically detected and processed by an intensified optical multichannel analyzer system.      

Time-resolved laser-induced fluorescence spectroscopy for enhanced demarcation of human atherosclerotic plaques

We report on the enhanced demarcation between human atherosclerotic plaques and normal vessel wall obtained using time-resolved detection of laser-induced fluorescence rather than the customary time-integrated monitoring technique. A frequency-doubled mode-locked and cavity-dumped continuous wave dye laser was used for picosecond pulse generation at 320 nm, and photon-counting techniques were employed for the time-resolved signal monitoring from human aorta samples in vitro. Implications for imaging fluorescence angioscopy and spectroscopic guidance in laser ablation of plaque are indicated.     

Picosecond UV photolysis and laser-induced fluorescence probing of gas-phase nitromethane

Ground-state NO₂ radicals are formed in <5 ps with a quantum yield of ≈ 70% in 264 nm photolysis of low pressure nitromethane, as revealed by laser-induced fluorescence probing. Raman shifted photolyzing pulses indicate the NO₂ yield varies little with wavelength, although a small yield of excited state NO^*₂ produced at 264 nm increases significantly at 238 nm.     

Applicability of quinolizino-coumarins for monitoring free radical photopolymerization by fluorescence spectroscopy

Applicability of commercially available 2,3,5,6-1H,4H-tetrahydro-quinolizino[9,9a,1-gh]coumarin (Coumarin 6H) and its 9-methyl (Coumarin 102), 9-trifluoromethyl (Coumarin 153) and 10-carboxy (Coumarin 343) derivatives as fluorescent molecular probes for monitoring progress of free radical photopolymerization of several acrylic and methacrylic monomers by Fluorescence Probe Technique (FPT) has been tested. The progress of the photopolymerization was monitored using a specially designed cure monitoring system. It was found that all the quinolizino-coumarins shifted their fluorescence spectra towards shorter wavelengths with progress of polymerization, which enabled monitoring the progress in terms of fluorescence intensity ratios as the progress indicator. Coumarin 6H turned out to be the most sensitive to changes occurring during polymerization. Coumarin 102 and Coumarin 153 exhibit only about 20% lower sensitivity than that of Coumarin 6H, so those are also good enough for the cure monitoring of acrylic monomers, except for tetraethylene glycol diacrylate, where the quinolizino-coumarins response was disturbed by some fluorescent side product. Moreover, it has been found that the FPT technique has some limitations in the case of monofunctional monomers.     

Use of subambient DSC for liquid and semi solid dosage forms

Examples of the use of subambient DSC for characterizing excipients which have the melting range within ambient or subambient temperatures as well as liquid and semiliquid dosage forms are presented in the following paper.Influences of the quality, polymorphism, storage of excipients used for dosage forms and changes in the composition on the melting behaviour and quality of dosage forms were investigated.Changes of the melting behaviour of dosage forms determined with subambient DSC have shown to correlate with the quality of the dosage form, the quality of excipients used or structural changes (due to various influences) in the dosage form. DSC for use in the range of subambient and ambient temperatures represents an alternative analytical method for development and quality assurance in pharmaceutical industry for liquid and semiliquid preparations.     

Absolute characterization of laser-induced breakdown spectroscopy detection systems

A quantitative comparison of the performance of four different laser-induced breakdown spectroscopy detection systems is presented. The systems studied are an intensified photodiode array coupled with a Czerny–Turner spectrometer, an intensified CCD coupled with a Czerny–Turner spectrometer, an intensified CCD coupled to an Echelle spectrometer, and a prototype multichannel compact CCD spectrometer system. A simple theory of LIBS detection systems is introduced, and used to define noise-equivalent spectral radiance and noise-equivalent integrated spectral radiance for spectral detectors. A detailed characterization of cathode noise sources in the intensified systems is presented.     

Sensitive and selective spectrochemical analysis of metallic samples: the combination of laser-induced breakdown spectroscopy and laser-induced fluorescence spectroscopy

In order to improve on analytical selectivity and sensitivity, the technique of laser-induced fluorescence spectroscopy (LIFS) was combined with laser-induced breakdown spectroscopy (LIBS). The main thrust of this investigation was to address analytical scenarios in which the measurement site may be difficult to access. Hence, a remote LIBS+LIFS arrangement was set up, and the experiments were carried out on samples surrounded by air at atmospheric pressure, rather than in a controlled buffer gas environment at reduced pressure. Representative for proof of principle, the detection of aluminium, chromium, iron and silicon at trace level concentrations was pursued. These elements are of importance in numerous chemical, medical and industrial applications, and they exhibit suitable resonance transitions, accessible by radiation from a pulsed Ti:sapphire laser system (its 2nd and 3rd harmonic outputs). All investigated elements have an energy level structure in which the laser-excited level is a member of a group of closely-spaced energy levels; thus, this allowed for easy off-resonant fluorescence detection (collisional energy transfer processes). Since numerous of the relevant transition wavelengths are within a narrow spectral interval, this opens the possibility for multi-element analysis; this was demonstrated here for Cr and Fe which were accessed by rapidly changing the tuneable laser wavelength.     

Near infrared transmittance analysis for the assay of solid pharmaceutical dosage forms

The recent commercial availability of near infrared spectrometric instruments for the transmittance analysis of solids makes it possible to analyse solid drugs in their finished form. Application of the method to the control of the assay of the active ingredient in diphenhydramine tablets gave results comparable to those obtained in reflectance mode with whole and milled tablets.     

毛细管电泳-473 nm固体激光诱导荧光检测系统的建立

以发射波长473nm的半导体激光泵浦固体激光器(LD DPSSL)为激发光源,研制了一种小型模块化激光诱导荧光检测器。以异硫氰酸荧光素(FITC)为荧光探针,毛细管电泳柱上检测(0.05mmi.d)评价了该体系,得到了5×10-12mol L的浓度检出限。利用该系统考察了氨基酸、实际样品中B族维生素的检测。     

Practical issues of hyperspectral imaging analysis of solid dosage forms

Hyperspectral imaging techniques have widely demonstrated their usefulness in different areas of interest in pharmaceutical research during the last decade. In particular, middle infrared, near infrared, and Raman methods have gained special relevance. This rapid increase has been promoted by the capability of hyperspectral techniques to provide robust and reliable chemical and spatial information on the distribution of components in pharmaceutical solid dosage forms. Furthermore, the valuable combination of hyperspectral imaging devices with adequate data processing techniques offers the perfect landscape for developing new methods for scanning and analyzing surfaces. Nevertheless, the instrumentation and subsequent data analysis are not exempt from issues that must be thoughtfully considered. This paper describes and discusses the main advantages and drawbacks of the measurements and data analysis of hyperspectral imaging techniques in the development of solid dosage forms.     

Microwave-assisted extraction of active pharmaceutical ingredient from solid dosage forms

The microwave assisted extraction (MAE) technique has been evaluated for the extraction of active pharmaceutical ingredients (API) from various solid dosage forms. Using immediate release tablets of Compound A as a model, optimization of the extraction method with regards to extraction solvent composition, extraction time and temperature was briefly discussed. Complete recovery of Compound A was achieved when samples were extracted using acetonitrile as the extraction solvent under microwave heating at a constant cell temperature of 50 degrees C for 5 min. The optimized MAE method was applied for content uniformity (single tablet extraction) and potency (multiple tablets extraction) assays of release and stability samples of two products of Compound A (5 and 25mg dose strength) stored at various conditions. To further demonstrate the applicability of MAE, the instrumental extraction conditions (50 degrees C for 5 min) were adopted for the extraction of montelukast sodium (Singulair) from various solid dosage forms using methanol-water (75:25, v/v) as the extraction solvent. The MAE procedure demonstrated an extraction efficiency of 97.4-101.9% label claim with the greatest RSD at 1.4%. The results compare favorably with 97.6-102.3% label claim with the greatest RSD at 2.9% obtained with validated mechanical extraction procedures. The system is affordable, user-friendly and simple to operate and troubleshoot. Rapid extraction process (7 min/run) along with high throughput capacity (up to 23 samples simultaneously) would lead to reduced cycle time and thus increased productivity.     

Use of sol–gels as solid matrixes for laser-induced breakdown spectroscopy

Silicon, zirconium and aluminum sol–gels were investigated as suitable starting materials for tunable matrix calibration standards for laser-induced breakdown spectroscopy. A fast and simple preparation method was developed, using aluminum i-propoxide as the precursor in the sol–gel synthesis, which allows one to quickly prepare solid calibration standards offering very homogenous analyte distribution in the matrix, low optical spectral background, as well as reproducible behavior towards laser ablation and vaporization. The surface of the calibration targets and the morphology of the ablation craters were examined by optical and scanning electron microscopy, and the material ejection process was observed by shadowgraph imaging. Low μg/g detection limits and 4–15% relative standard deviation were measured by laser induced breakdown spectroscopy for Pb, Cr and Be used as internal standards.     

Novel techniques for plasma diagnostics: Electron paramagnetic resonance and laser-induced fluorescence spectroscopy

Diagnostic techniques for low-pressure, cold plasmas have mostly been limited to emission and mass spectrometry. Herein, the techniques of gas-phase electron paramagnetic resonance and laser-induced fluorescence spectroscopy are briefly reviewed. Particular attention is paid to their attributes which make them good candidates for plasma diagnostic tools. It is found that gas-phase electron paramagnetic resonance can be used to determine and monitor the absolute concentration of a number of important plasma species, e.g., free radicals and atoms. Laser-induced fluorescence can also monitor, with even more sensitivity, but perhaps not so well absolutely, the concentrations of many plasma species, e.g., free radicals, metastable excited states, and molecular ions.     

UV spectrophotometry and nonaqueous determination of terbinafine hydrochloride in dosage forms.

An ultraviolet spectrophotometric and a nonaqueous volumetric method for determining terbinafine hydrochloride (TH) in pharmaceutical formulations are presented. The UV spectrophotometric procedure was developed for assay of TH in raw materials, tablets, and creams. The method was tested for linearity (0.8-2.8 micrograms/mL, r = 0.9997), recovery (102.00% for creams and 99.90% for tablets) and precision (101.3%, CV = 0.96%, n = 9, for creams; 100.25%, CV = 1.08%, n = 9, for tablets). The volumetric method involves titration of TH with 0.05M perchloric acid with crystal violet as indicator. This method was used for quantitative determination of TH in raw materials and tablets. Mean recovery and precision were, respectively, 100.41 and 101.18% (CV = 1.64%, n = 9) for TH tablets. There were no significant differences between the proposed methods and a previously described high-performance liquid chromatographic method. The UV spectrophotometric and titrimetric methods are potentially useful for a routine laboratory because of their simplicity, rapidity, and accuracy.     

Thermal behavior of verapamil in pure and in solid dosage forms

Verapamil is a phenyl-alchil-amine type pharmaceutical largely used as a specific calcium antagonist. Knowledge of drug-excipient compatibility represents an important phase in development of different dosage forms. Hyphenated techniques are versatile for obtaining such necessary information’s. The TG/DTG/DTA curves were obtained in air at different heating rates and in nitrogen. The IR spectra of pure compound and its char at 400 °C (by U-ATR technique) and the IR identification of Evolved Gasses allowed some discussions on the thermally induced events. In the solid dosage forms verapamil was mixed with talc, magnesium stearate, starch, and cellulose, and the corresponding thermoanalytical curves were compared with that one of pure I. No physical or chemical interactions were observed till 250 °C. A kinetic analysis was performed for TG step of verapamil between 250 and 350 °C. The data at four heating rates (7, 10, 12, 15 °C min⁻¹) were processed on a strategy using at last three different kinetic methods. For these, the NPK method seems to be less speculative, allowing an objective determination of the kinetic parameters.     

Bioaerosols chemometric characterization by laser-induced fluorescence: Air sample analysis

A laser-induced fluorescence (LIF) system was optimized using a solution of Micrococcus luteus in ethanol/water 50% (v/v) to obtain spectra in the gas phase of 46 bioaerosols. Experimental designs such as Plackett-Burman and factorial design were applied. The fluorescence spectra were treated chemometrically by principal component analysis, linear discriminant analysis and hierarchical cluster analysis to classify the microorganisms according to family, morphology and gram. The best results were obtained using LDA. The method was applied to air samples and the LIF results allowed to characterize bioaerosols reliability. The robustness of the technique was demonstrated by the identification of many bacteria.