Molecular mass distribution analysis of ethyl(hydroxyethyl)cellulose by size-exclusion chromatography with dual light-scattering and refractometric detection

Dual low-angle light scattering and refractometric detection coupled to size-exclusion chromatography provided proof for the presence of a low amount of stable aggregates/particles in ethyl(hydroxyethyl)cellulose. Unlike the correct size-exclusion chromatographic behavior of the parent polysaccharide itself, the aggregates exhibit variable size-dependent weak retention as a function of flow-rate and of ionic strength of the aqueous mobile phase. Therefore, determination of the molecular mass of non-aggregated polymer is possible in aqueous mobile phase containing 0.1 M NaCl under conditions at which aggregates are completely adsorbed on the column packing irrespective of the flow-rate used. Flow-rate and ionic strength-dependent variations of aggregate behavior as well as model size-exclusion experiments with latex particles indicate that they partly carry a minute charge and have a compact structure. Their weak retention under the separation conditions used suggests a difference in their surface chemistry when compared with the dissolved polymer coils which exhibit a correct size-exclusion behavior.     

Determination of molecular weights and solubility parameters of high-polymers by gas chromatography

Summary A new method for the simultaneous determination of molecular weight and solubility parameter of high-polymer was proposed using the sample polymer as the solvent and a halogen as the solute in gas chromatography at two different temperatures. Molecular weights of Silicon Oil DC 550, 702, and 710, and of PEG 1500, 4000, and 6000 are 50000, 62300, and 89200, and 1500, 3100, and 6750, respectively. Solubility parameters of them are 8.1, 8.0, and 7.9, and 11.7, 11.6, and 11.6, respectively.

---

Gas-chromatographische Bestimmung von Molekulargewichten und Löslichkeitsparametern von Hochpolymeren

Zusammenfassung Bei der empfohlenen Methode wird eine gas-chromatographische Bestimmung bei zwei verschiedenen Temperaturen mit dem Polymeren als Lösungsmittel und einem Halogen als gelöster Substanz durchgeführt. Die Molekulargewichte von Silicon Oil DC 550, 702 und 710 sowie von PEG 1500, 4000 und 6000 wurden zu 50000, 62300, 89200, 1500, 3100 und 6750 gefunden; die entsprechenden Löslichkeitsparameter betragen 8,1, 8,0, 7,9, 11,7, 11,6 und 11,6.

The authors are indebted to Dr. Y. Dozen for his skilful measurements of molecular weights with the usual methods.     

羟丙基甲基纤维素作为水泥添加剂的研究(二)

以萘磺酸甲醛缩合物为分散剂，水溶性羟丙基甲基纤维素衍生物为粘稠剂，研究了它们的复合物以对混凝土材料的分散性与粘稠性及其它性能的影响，并探索了其作用机理。     

Determination of catecholamines in human serum by micro high-performance liquid chromatography with micro precolumn and dual electrochemical detection

A dual electrochemical detector having two working electrodes (anode and cathode) in parallel--opposed configuration suitable for micro high-performance liquid chromatography was developed for the selective and sensitive detection of catecholamines on the basis of their electrochemical reversibility and catalytic amplification by recycling oxidation and re-reduction. The micro high-performance liquid chromatographic system with a micro alumina precolumn for enriching catecholamines and the dual electrochemical detector in parallel--opposed configuration was successfully utilized for the determination of catecholamines in healthy human serum injected directly after ultrafiltration.     

Comprehensive analysis of the substituent distribution in hydroxyethyl celluloses by quantitative MALDI-ToF-MS

Three HECs with a high MS (HEC 1: 1.89, HEC 2: 1.94, HEC 3: 3.03) were analyzed with respect to their substituent distribution and tandem reaction in the glucosyl unit by GLC of the corresponding glucitol acetates, and along the polymer chain by MALDI-ToF-MS after a multi-step sample preparation. For comparison of the experimental data with a random pattern an extended Bernoulli plot was applied to calculate a random distribution for the composition of un-, mono-, di-, tri-, and up to heptasubstituted glucosyl units (c0, c1, c2, ... c7).     

离子色谱分离-(二极管阵列)紫外检测法测定AMPS的含量和纯度

建立了用高效液相色谱法测定AMPS含量和纯度的方法.样品用Zorbax SAX阴离子交换柱为分离柱,0.1 mol/L KH2PO4溶液为流动相,检测波长为220 nm进行分析.AMPS在进样量0.5～50 μg范围内峰面积线性关系良好,回收率为96.0%～103.2%,方法的平均RSD为0.49% (n=6).该方法可作为常规分析方法.     

Evaluation of enzymatic kinetic parameters by thin-layer chromatography with radiometric detection

A radiochromatographic method is described for evaluating K_m and v_max based on a simple modification of the integrated Michaelis-Menten equation. Experimental points are ritted directly to this equation be an iterative technique, the validity of which is tested on simulated experimental data. Results for lysine, ornithine, and glutamic acid decarboxylases are reported.     

Determination of polyamines by high-performance liquid chromatography with chemiluminescence detection

A method was developed for the determination of polyamines (PA) by high-performance liquid chromatography with chemiluminescence detection. It is based on the unsaturated complex of PA with Cu(II) which had a strong catalytic effect on the luminol-H₂O₂ chemiluminescence reaction. The separation of PA was carried out on a reveres phase C18 column using methanol/water (25/75, v/v) as a mobile phase. The method was applied to the analysis of putrescine and the total amount of spermine and spermidine in apple leaves and strawberry fruit. The results indicated that the method is practical and useful.     

Determination of phytosiderophores by anion-exchange chromatography with pulsed amperometric detection

Phytosiderophores of the mugineic acid family are separated by anion-exchange HPLC using NaOH gradient elution. Separation of mugineic acid (MA), 2'-deoxymugineic acid (DMA), 3-hydroxymugineic acid (HMA) and 3-epi-hydroxymugineic acid (epi-HMA) is obtained within 15 min. Detection of the underivatised phytosiderophores is performed using pulsed amperometric detection (PAD) at pH 13. The sensitivity of the detection increases in the order DMA < MA < HMA < epi-HMA and respective detection limits of 5 microM (DMA), 1 microM (MA) and < 0.5 microM (HMA, epi-HMA) are achieved. PAD is discussed in comparison with the well-established fluorimetric detection method after post-column derivatisation with ortho-phthaldialdehyde. The main advantage of PAD is the simplicity of the method (no derivatisation) and the high sensitivity for hydroxylated mugineic acids. The method is used for the determination of phytosiderophores in root washings of iron-deficient and non-deficient wheat and barley plants.     

Determination of tobacco alkaloids by gas chromatography with nitrogen-phosphorus detection

An improved method, gas chromatography (GC) with nitrogen-phosphorus detection (NPD), has been used for determination of alkaloids in green and cured tobacco. Tobacco alkaloids of interest included nicotine, nornicotine, myosmine, anabasine, and anatabine. Tobacco samples were treated with a small quantity of aqueous ammonia solution to "loosen" tobacco tissue and to adjust pH, then extracted with solvent. The composition of the extraction solvent solution affected recoveries of the alkaloids, particularly nornicotine, and also contributed to other phenomena such as carry-over in the injection liner and "quenching" of the nitrogen-phosphorus detector. Use of a packed injection liner (e.g. with Carbowax-KOH on Chromosorb) to reduce carry-over was studied. Quenching of the nitrogen-phosphorus detector was eliminated by reducing the injection volume (i.e. increasing the split ratio), by use of a packed injection liner, and by reducing the amount of pretreatment with aqueous ammonia. A narrow bore capillary column (i.e. 0.18 mm id) was used to improve sensitivity and resolution and to increase the speed of GC analysis. An internal standard, 2,4'-dipyridyl, was used for quantitative measurement of these tobacco alkaloids.     

Determination of organochlorinated compounds in marine organisms by microwave-assisted extraction with molecular organized systems and liquid chromatography with fluorescence detection

Microwave-assisted extraction methodology is used to extract different compounds from various kinds of marine solid samples, such as soils, sediments, and organisms. A new analytical method was developed to extract polychlorinated biphenyls and polychlorinated dibenzofurans by using a conventional microwave system and the nonionic surfactant, polyoxyethylene 10 lauryl ether as the extractant as a prior step to liquid chromatography analysis coupled with fluorescence detection. The method was applied to the extraction and determination of these analytes in samples of blue mussels (Mytilus galloprovincialis), cockles (Cerastoderma edule), and clams (Dosinia exoleta). Compared with the traditional Soxhlet extraction, results of the proposed method showed acceptable recovery percentages for the organochlorinated compounds under study and standard deviation values <10%.     

Determination of flunitrazepam and nitrazepam in beverage samples by liquid chromatography with dual electrode detection using a carbon fibre veil electrode

Both nitrazepam and flunitrazepam have been determined by high-performance liquid chromatography dual electrode detection (LC-DED) in the reductive–reductive mode, using a carbon fibre veil electrode (CFVE) in conjugation with a glassy carbon electrode. Initial studies were made to optimise the chromatographic conditions. These were found to be 45% acetonitrile-55% acetate buffer (50 mM, pH 4.1) at a flow rate of 1.0 ml/min, employing a Hypersil C18, 5 μm, 250 mm × 4.6 mm column. Cyclic voltammetric studies performed to ascertain the redox behaviour of nitrazepam and flunitrazepam at a CFVE in the optimised mobile phase. Studies showed that similar voltammetric behaviour was obtained to that report at Hg or glassy carbon based electrodes. Further studies were then carried out to identify the optimum conditions required for the LC-DED determination of nitrazepam and flunitrazepam in beverage samples. Hydrodynamic voltammetry was used to optimise the applied potential at the generator and detector cells; these were identified to be −2.40 and −0.25 V, respectively. A linear range of 2.0 to 100 μg ml⁻¹, with a detection limit of 20 ng ml⁻¹ was obtained. A convenient and rapid method for the determination of both nitrazepam and flunitrazepam in beverage sample was developed. Following a simple sample extraction procedure, extracts were examined using the optimised LC-DED procedure. An average percentage recovery of 95.5% (%CV = 4.5%) for nitrazepam and 78.0% (%CV = 8.8%) was achieved for a sample of “Pepsi Max” spiked at 1.0 μg ml⁻¹ nitrazepam, 1.47 μg ml⁻¹ flunitrazepam. Presented at the 4th Annual Meeting of the Great Western Electrochemistry Group, 8th June 2005, University of the West of England, Bristol, UK.     

Ionic conductivity and tensile properties of hydroxyethyl and hydroxypropyl chitosan membranes

Hydroxyethyl chitosan and hydroxypropyl chitosan were prepared through the reaction of alkali‐chitosan with 2‐chloroethanol and propylene epoxide, respectively. Fourier transform infrared and ¹³C NMR measurements were made to examine the substitution on the chitosan unit. According to a comparison of the peak areas between the modified chitosan and unmodified chitosan and the integration of peak areas of ¹H NMR spectra, for both modified chitosans, the maximum degree of substitution was less than 25%. The ionic conductivity and mechanical properties of modified chitosan membranes were investigated. In comparison with the unmodified chitosan membrane, hydrated hydroxyethyl and hydroxypropyl chitosan membranes with a higher degree of substitution showed an increase in ionic conductivity of about one order of magnitude; moreover, the crystallinity of hydroxyethyl and hydroxypropyl chitosan membranes was remarkably reduced, and their swelling indices increased significantly. However, these modified membranes did not exhibit significant changes in their tensile strength and breaking elongation. © 2004 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 42: 1379–1397, 2004     

羟丙基甲基纤维素作为水泥添加剂研究(四)

以萘磺酸甲醛缩合物为分散剂，水溶性羟丙基甲基纤维素衍生物为粘稠剂，研究了它们的混合物对混凝土材料的分散性与粘稠性及其它性能的影响，并探索了其作用机理。     

Determination of iodide and bromide by ion chromatography with post-column reaction detection

During an investigation into the mechanism of the biosynthesis of thyroid hormones, it became necessary to determine traces of iodide and bromide in biological matrices as well as in food. A vydac 302-IC anion-exchange column with methanesulphonic acid as the mobile phase was used for the ion chromatographic separation of iodide and bromide. A post-column reaction detector was developed based on the reaction between iodide or bromide, chloramine-T and 4,4'-bis(dimethylamino)diphenylmethane. Methods with minimal sample preparation are described for determination of iodide or bromide in serum, milk, salt and water. The detection limit is ca. 20 pg iodide and 15 ng bromide injected.     

Determination of chlorophenols by solid-phase microextraction and liquid chromatography with electrochemical detection

A solid-phase microextraction method has been developed for the determination of 19 chlorophenols (CPs) in environmental samples. The analytical procedure involves direct sampling of CPs from water using solid-phase microextraction (SPME) and determination by liquid chromatography with electrochemical detection (LC-ED). Three kinds of fibre [50 microm carbowax-templated resin (CW-TPR), 60 microm polydimethylsiloxane-divinylbenzene (PDMS-DVB) and 85 microm polyacrylate (PA)] were evaluated for the analysis of CPs. Of these fibres, CW-TPR is the most suitable for the determination of CPs in water. Optimal conditions for both desorption and absorption SPME processes, such as composition of the desorption solvent (water-acetonitrile-methanol, 20:30:50) and desorption time (5 min), extraction time (50 min) and temperature (40 degrees C) as well as pH (3.5) and ionic strength (6 g NaCl) were established. The precision of the SPME-LC-ED method gave relative standard deviations (RSDs) of between 4 and 11%. The method was linear over three to four orders of magnitude and the detection limits, from 3 to 8 ng l(-1), were lower than the European Community legislation limits for drinking water. The method was applied to the analysis of CPs in drinking water and wood samples.