The sensitivity of some chromatographic sprays

The limits of identification of twenty six common cations, with a selected number of spray reagents used in paper chromatography, have been determined. A table of the most sensitive tests is given.     

硼烷分子中化学键性质的研究III. 锥型分子B3H6X的结构与成键特征

用MP2/6-31G方法, 对三角锥型分子B3H6X(X=B^2^-, C^-,N, O^+, BH^-, CH和NH^+)及其碎片B3H6和X的结构进行了abinitio研究。结果表明, 当X=NH^+, O^+和N时, B3H6基环上的端氢(Ht)朝着帽基X方向, 而当X=CH, BH^-, B^2^-和C^-时, Ht却转向帽基X的方向。这种特征可用配位原子的电负性和配位原子轨道的弥散性给以说明。我们还进一步研究了B3H6X系列化合物的结合能和稳定性。     

Studies on hydrogen bonding of adrenaline/acetone and adrenaline/methanol complexes: computational and experimental approach

Structural Chemistry - In this investigation, we elucidate the potential interaction of volatile organic solvents such as acetone and ethanol with adrenaline hormone through hydrogen bonding. There...     

Stability-indicating chromatographic methods for the determination of some oxicams

Two sensitive and selective methods were developed for the determination of some oxicams, namely, lornoxicam (LOX), tenoxicam (TEX), and meloxicam (MEX), in the presence of their alkaline degradation products. The first method is based on the thin-layer chromatographic separation of the 3 drugs from their alkaline degradation products, followed by densitometric measurement of the intact drug spots for LOX, TEX, and MEX at 380, 370, and 364 nm, respectively. The developing systems used for separation are ethyl acetate-methanol-26% ammonia (17 + 3 + 0.35, v/v/v) for LOX and TEX and chloroform-n-hexane-96.0% acetic acid (18 + 1 + 1, v/v/v) for MEX. The linear ranges were 0.25-6.0 microg/spot for LOX and TEX and 0.5-10 microg/spot for MEX, with mean recoveries of 99.80 +/- 1.32, 100.57 +/- 1.34, and 100.71 +/- 1.57%, respectively. The second method is based on the liquid chromatographic separation of the 3 drugs from their alkaline degradation products on a reversed-phase C18 column, using mobile phases of methanol-acetonitrile-acetate buffer, pH 4.6 (4.5 + 0.5 + 5.0, v/v/v) for LOX and MEX and methanol-acetonitrile-acetate buffer, pH 4.6 (1.9 + 0.1 + 3.0, v/v/v) for TEX at ambient temperature. Quantification is achieved by UV detection at 280 nm, based on peak area. The linear ranges were 0.5-20 microg/mL for LOX and TEX and 1.25-50 microg/mL for MEX, with mean recoveries of 99.81 +/- 1.01, 98.90 +/- 1.61, and 100.86 +/- 1.55%, respectively. The methods were validated according to guidelines of the International Conference on Harmonization. The developed methods were successfully applied to the determination of LOX, TEX, and MEX in bulk powder, laboratory-prepared mixtures containing different percentages of degradation products, and pharmaceutical dosage forms.     

Studies on the adsorption of cell impurities from plasmid-containing lysates to phenyl boronic acid chromatographic beads

Plasmid DNA (pDNA) is purified directly from alkaline lysis-derived Escherichia coli (E. coli) lysates by phenyl boronate (PB) chromatography. The method explores the ability of PB ligands to bind covalently, but reversibly, to cis-diol-containing impurities like RNA and lipopolysaccharides (LPS), leaving pDNA in solution. In spite of this specificity, cis-diol free species like proteins and genomic DNA (gDNA) are also removed. This is a major advantage since the process is designed to keep the target pDNA from binding. The focus of this paper is on the study of the secondary interactions between the impurities (RNA, gDNA, proteins, LPS) in a pDNA-containing lysate and 3-amino PB controlled pore glass (CPG) matrices. Runs were designed to evaluate the role of adsorption buffer composition, feed type (pH, salt content), CPG matrix and sample pretreatment (RNase A, isopropanol precipitation). Water was chosen as the adsorption buffer over MgCl(2) solutions since it maximised pDNA yield (96.2±4.9%) and protein removal (61.3±3.0%), while providing for a substantial removal of RNA (65.5±3.5%) and gDNA (44.7±14.1%). Although the use of pH 3.5 maximised removal of impurities (~75%), the best compromise between plasmid yield (~96%) and RNA clearance (~60-70%) was obtained for a pH of 5.2. Plasmid yield was maximal (>96%) when the concentration of acetate and potassium ions in the incoming lysate feed were 1.7 M and 1.0 M, respectively. The pre-treatment of lysates with RNase A deteriorated the performance since the resulting oligoribonucleotides lack the cis-diol group at their 3' termini. Overall, the results support the idea that charge transfer interactions between the boron atom at acidic pH and electron donor groups in the aromatic bases of nucleic acids and side residues of proteins are responsible for the non-specific removal of gDNA, RNA and proteins.     

Studies on nucleation from solution of some analytically important metal chelates

The combination of precipitation from homogeneous solution and Vonnegut's droplet technique is employed in the study of nucleation from solution of bis(1,2-cyclohexanedionedioxunato)Ni(II), bis(1,2-cycloheptanedionedioximato)Ni(II), bis(1,2-cyclohexanedionedioximato)Pd(II) and bis(1,2-cycloheptanedionedioximato)-Pd(II). Values of the kinetic constant, surface energy, critical radius and the number of molecules per critical nucleus are calculated and discussed in terms of the limitations of the classical theory of nucleation when applied to crystal nucleation from aqueous solutions of electrolytes.     

Effect of the nature of the carrier gas on the chromatographic characteristics of monolithic silica capillary columns

Chromatographing a model mixture of hydrocarbons with various carrier gases (helium, hydrogen, nitrogen, carbon dioxide, and nitrous oxide) was used to study the separation ability of monolithic silica capillary columns. It was revealed that the nature of the carrier gas strongly affects the retention time of the sorbates and the height equivalent to a theoretical plate (HETP) of the column, with the values of both these parameters decreasing in the series He > H₂ > N₂ > CO₂ ～ N₂O. This effect was found to be more pronounced for normal hydrocarbons than for their isomers. For chromatographing with CO₂ or N₂O under optimum conditions, the HETP was 25–30 μm, a value indicative of a higher specific efficiency of monolithic capillary columns. Theoretical correlations between the HETP and the properties of the mobile phase were considered. As a result, it was concluded that elevated pressures of the carrier gas, which are required to ensure the optimum operation of monolithic capillary columns, may affect the properties of the chromatographic system.     

Studies on the emulsifying behaviour of some surfactants

Summary Emulsifying powers of various surfactants have been determined by bringing the emulsion systems at isoelectric point by polyvalent inorganic ions. Several useful binding parameters have been calculated.

---

Zusammenfassung Es wurde die emulgierende Wirkung verschiedener Tenside untersucht. Dazu wurden die Emulsionen durch polyvalente anorganische Ionen auf den isoelektrischen Punkt gebracht. Aus den Konzentrationen, bei denen Ladungsumkehr erfolgte, wurden verschiedene Bindungsparameter abgeschätzt.