Acylation of [B12H12]2− dianion by carboxylic acid halides

The sodium salt of [B₁₂H₁₂]²⁻ dianion reacts with carboxylic acid halides to give a mixture of B-acylated product [B₁₂H₁₁COR]²⁻ and an unstable intermediate, the latter undergoing hydrolysis to form [B₁₂H₁₁OH]²⁻. The ratio of the products formed depends on the nature of the radical R. The reaction mechanism was studied by NMR spectroscopy. A number of novel [B₁₂H₁₁COR]²⁻ compounds were synthesized; their structures were confirmed by NMR and IR spectral data. Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 5, pp. 980–985, May, 1998.     

α- and β-cyclodextrin complexes with n-alkyl carboxylic acids and n-alkyl p-hydroxy benzoates. A molecular mechanics study of 1:1 and 1:2 associations

Molecular mechanics (MM) methods were employed to evaluate stabilization upon formation of inclusion compounds between two different guest molecules and α- and β-cyclodextrins (CDs) for two different stoichiometries 1:1 and 1:2. The two guest molecules studied were n-alkyl carboxylic acids and n-alkyl p-hydroxy benzoates with variety of chain lengths. The computed stability for the inclusion compounds between α-CDs and n-alkyl carboxylic acids reproduced experimental data reported in the literature. The transition between 1:1/1:2 complexes occurred at an alkyl chain length of n_C=9. It was previously demonstrated by diffusion coefficients measures that a stable 1:2 stoichiometry inclusion compound could be formed between n-alkyl p-hydroxy benzoates and α-CD for the chain length n_C>4. The computed results reproduced the experimental ones. The combination between OPLS and GB/SA resulted in better agreements with experiments than those obtained with MM2 and MM3.     

Binary and ternary complexes involving manganese(II), 2,2’-bipyridine and halide or thiocyanate ions inN,N-dimethylformamide

Ternary complexation involving the manganese(II) ion, 2,2’-bipyridine (bipy), and halide (chloride, bromide) or pseudohalide (thiocyanate) ions has been studied by precise titration calorimetry inN,N -dimethylformamide (DMF) at 298K. All the titration curves are explained well in terms of formation of mononuclear complexes of the type [MnX_m(bipy)_n](^2-m) + (X = CI, Br or SCN), and the formation of [MnCl(bipy)]⁺, [MnCl₂(bipy)], [MnCl(bipy)₂]⁺ and [MnCl₂(bipy)₂] has been established in the chloride system, [MnBr(bipy)]⁺, [MnBr₂(bipy)], [MnBr(bipy)₂]⁺ in the bromide system, and [Mn(NCS)(bipy)]⁺, [Mn(NCS)₂(bipy)], [Mn(NCS)₃(bipy)]^-, [Mn(NCS)(bipy)₂]⁺, and [Mn(NCS)₂(bipy)₂] in the thiocyanate system. The data were analyzed on the basis of the thermodynamic parameters for the binary Mn^lIbipy and Mn^II-X (X = Cl, Br and SCN) systems, the latter being determined in previous work. The formation constants, reaction enthalpies, and entropies of the ternary complexes were extracted. The thermodynamic parameters thus obtained are discussed in comparison with those of the corresponding systems of other transition metal(II) ions.     

Sulfonated carbon catalyzed oxidation of aldehydes to carboxylic acids by hydrogen peroxide

Sulfonated carbon as a strong and stable solid acid catalyst exhibited excellent catalytic performance in various acid-catalyzed reactions. Here, sulfonated carbon, as catalyst for oxidation reaction, was prepared via the carbonization of starch followed by sulfonation with concentrated sulfuric acid. N₂ physisorption, X-ray diffraction, Fourier transform infrared spectroscopy, X-ray fluorescence and acid-base titration were used to characterize the obtained materials. The catalytic activity of sulfonated carbon was studied in the oxidation of aldehydes to carboxylic acids using 30 wt% H₂O₂ as oxidant. This oxidation protocol works well for various aldehydes including aromatic and aliphatic aldehydes. The sulfonated carbon can be recycled for three times without obvious loss of activity.     

Polymer-supported O-methylisourea: a new reagent for the O-methylation of carboxylic acids

[reaction: see text] A solid-supported O-methylisourea reagent has been prepared in one step starting from commercially available solid-supported carbodiimide. The isourea reagent has been successfully used for the preparation of methyl esters from the corresponding carboxylic acids. The crude products obtained after resin filtration and solvent evaporation are generally obtained in >98% purity.     

An expedient route for the reduction of carboxylic acids to alcohols employing 1-propanephosphonic acid cyclic anhydride as acid activator

A simple and efficient method for the synthesis of alcohols from the corresponding carboxylic acids is described. Activation of carboxylic acid with 1-propanephosphonic acid cyclic anhydride (T3P) and subsequent reduction using NaBH₄ yield the alcohol in excellent yields with good purity. Reduction of several alkyl/aryl carboxylic acids and N^α-protected amino acids/peptide acids as well as N^β-protected amino acids was successfully carried out to obtain corresponding alcohols in good yields. All the products were fully characterized by ¹H NMR and mass spectral analyses. The procedure is mild, simple and the isolation of the products is easy.     

Quantitative evaluations of surface-concentrated amino groups on monolithic-type solid supports prepared by copolymerization method

We have prepared novel monolithic-type highly cross-linked solid supports having surface amino group using a copolymerization method of functional monomers and cross-linking monomer. From the view point of controlled surface functionalities, we have firstly certified and proved quantitative determination methods of the surface amino groups to utilize and evaluate those solid supports prepared as affinity resins. We utilized a typical titration method and ninhydrin method that have been effectively utilized for quantitative determination of primary amine and amino acid. The ninhydrin method was calibrated using octylamine as a standard compound (R ² = 0.998) and proved applicability for the quantitative determination of other primary amines. A commercially available solid support, Affigel, was able to be quantitatively evaluated only by the ninhydrin method, while Toyopearl afforded just compatible amino group density to the value certified by the manufacturer only through titration method. The obtained incompatible results using both determination methods have been unclear at this moment. On the other hand, both determination methods afforded compatible amino group density of the prepared solid support. The obtained value was up to 126 μmol/ml, which was 94% of the calculated theoretical value based on the feed composition. The results suggested surface-concentrated introduction of amino groups. Based on the determination methods, especially ninhydrin method, we prepared the monolithic-type solid supports having various densities of surface amino groups and proved quantitative and surface-concentrated introduction of amino groups. Those amino groups were able to react with a relatively large ligand molecule, methotrexate, quantitatively and also with controlled density. The obtained results strongly suggest that the novel monolithic-type solid supports have possible advantages when we utilize those as affinity resins for target peptide analyses.     

POCl3 promoted metal-free synthesis of tertiary amides by coupling of carboxylic acids and N,N-disubstituted formamides

Herein we report a robust and synthetically useful catalyst-free amination methodology by the coupling of carboxylic acids and N-substituted formamides using POCl₃ as a promoter. Versatile amides with a wide array of substituent groups were prepared within only 1?h in good to excellent yields. And even multi-substituted aromatic carboxylic acids could give the desired products with satisfactory results.     

Surface properties of lignocellulosic fibers bearing carboxylic groups

Fibers with various amounts of carboxylic acid functionalities as determined with FTIR and conductometric titration were prepared by chemical modification of high bleached kraft pulp (CP) and chemical thermomechanical pulp (CTMP) with succinic anhydride. The degree of the modification was dependent on reaction time and the type of fiber used. The modification levelled off after 15h of reaction, and this effect was similar for both fiber substrates. The amount of carboxylic acid attached to CTMP, determined by weight gain, was however less than half of the amount of carboxylic moieties introduced to CP fibers at any reaction time. ESCA characterization of the succinylated fibers indicates that the carboxylic acid functionalities are predominantly introduced at the fiber surface. The wettability in water, measured as contact angle, of the succinylated CTMP fibers was significantly improved by the modification, whereas the wettability of CP fibers was slightly decreased. The differences in wettability are caused by the dispersive and polar characteristics of succinic acid attached to the fiber surface and its interaction with the fiber surface. The character of the linkage group in the anhydride used for modification as well as the composition of the cellulose fiber surface are suggested to play a crucial role in the surface energy of the modified fibers and hence their wetting properties.     

Natural monocrystalline chalcopyrite and galena as electrochemical sensors in non-aqueous solvents. Part II: potentiometric titrations of weak acids in N,N-dimethyformamide and N-methylpyrrolidone

Natural monocrystalline chalcopyrite and galena as new indicator electrodes for the potentiometric titration of weak acids in N,N-dimethylformamide and N-methylpyrrolidone were used. The investigated electrodes showed a linear dynamic response for p-toluenesulfonic acid concentrations in the range from 0.1 to 0.001 M, with a Nernstian slope of 59.0 mV for chalcopyrite and 33 mV per decade for galena in N,N-dimethylformamide, 56.1 mV for chalcopyrite, and 32.0 mV per decade for galena in N-methylpyrrolidone. The potential in the course of the titration and at the titration end point was rapidly established. Sodium methylate, potassium hydroxide, and tetrabutylammonium hydroxide proved to be very suitable titrating agents for these titrations. The response time was less than 10–11 s, and the lifetime of the electrodes is limitless. The advantages of the electrodes are log-term stability, fast response, reproducibility, easy preparation, and low cost. The results obtained in the determination of the investigated weak acids deviated on average by ±0.04–0.34% from those obtained with a glass electrode.     

Enthalpies of mixing of water withN,N-disubstituted amides of aliphatic carboxylic acids

The enthalpies of mixing ofN,N-dialkylpropionamides with water were measured at 298.15 K. A comparative analysis of enthalpy effects (H ^E) of mixing of water withN,N-disubstituted amides of formic, acetic, and propionic acids was performed. It was established that theH ^E values depend on the length of theN,N-alkyl substituents and the size of acidic radicals. The size of the nonpolar group and the electron-donor ability of amide molecules primarily affect the enthalpy of mixing. The relative electron-donor abilities of the amides were estimated by the calorimetric method. The results obtained were discussed by invoking thermochemical data for aqueous solutions of hexamethylphosphoric triamide. Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 10, pp. 1805–1810, October, 1997.     

Solvation Structure and Complexation of the Manganese(II) Ion in N,N-Dimethylpropionamide and N,N,N′,N′-Tetramethylurea Studied by Means of Titration Calorimetry and Raman Spectroscopy

Aprotic N,N-dimethylpropionamide (DMPA) and N,N,N′,N′-tetramethylurea (TMU) are both strong donor solvents and coordinate to metal ions through the carbonyl oxygen atom. These solvents show a different conformational aspect in the bulk phase, i.e., DMPA exists as either a planar cis or a nonplanar staggered conformer, while TMU exists in a single planar cis conformer. It has been established that the manganese(II) ion is solvated by five molecules in both solvents. Interestingly, although the planar cis conformer of DMPA is more favorable than the nonplanar staggered one in the bulk phase, the reverse is the case in the coordination sphere of the metal ion, i.e., a conformational change occurs upon solvation. To reveal the thermodynamic aspect of this conformational change, the complexation of Mn(II) with bromide ions in DMPA and TMU has been studied by titration calorimetry at 298 K. It was found that the Mn(II) ion forms mono-, di- and tri-bromo complexes in both solvents, and their formation constants, enthalpies and entropies were obtained. The Δ H∘₁ value for MnBr⁺ strongly depends on the solvent, i.e., it is positive (19.4 kJ-mol⁻¹) in DMPA and negative (−8.7 kJ-mol⁻¹) in TMU, whereas the Δ H^∘₂ and Δ H∘₃ values for the stepwise formation of MnBr₂ and MnBr₃⁻ are both small and negative. The enthalpy of transfer Δ_tH^∘ from DMPA to TMU, which is evaluated on the basis of the extrathermodynamic TATB assumption, is 25.5 kJ-mol⁻¹ for Mn²⁺ and −3.6 kJ-mol⁻¹ for MnBr⁺. These values indicate that the difference between the formation enthalpy of MnBr⁺ in the two solvents, Δ H^∘₁ (DMPA) – Δ H∘₁ (TMU), is mainly ascribed to the value of Δ_tH^∘(Mn²⁺). It is found that the metal ion is also five-coordinated in the monobromo complex, MnBr(DMPA)₄⁺ . The enthalpy for the conformational change of DMPA from its planar cis to the nonplanar staggered form is evaluated to be −11 and −5.5 kJ-mol⁻¹ for Mn(DMPA)₅^{2 +} and MnBr(DMPA)₄⁺, respectively. Note that these values are significantly smaller than the corresponding value (5.0 kJ-mol⁻¹) in the bulk phase. We thus conclude that, although steric hindrance among solvent molecules is reduced by replacing one DMPA of Mn(DMPA)₅^{2 +} with the relatively small bromide ion, DMPA molecules are still sterically hindered in the MnBr(DMPA)₄⁺ complex.     

Synthesis of carboxylic acids based on the closo-decaborate anion

A series of new boron-containing carboxylic acids was prepared by the ring-opening reaction of cyclic oxonium derivatives of the closo-decaborate anion [B₁₀H₁₀]²⁻ with methyl esters of hydroxybenzoic acids or the cyanide anion followed by hydrolysis of the obtained nitrile and esters. Acid hydrolysis of the esters results in protonation of the oxygen atom connected to the boron cage, with the formation of the corresponding O-protonated acids, isolated in the solid state. The compounds synthesized can be used in radionuclide diagnostics and boron neutron capture therapy of cancer.     

Diisophorone and related compounds. Part 1413C-nuclear magnetic resonance spectra of diisophorone carboxylic acids

The¹³C-nmr spectra of a group of diisophorone carboxylic acids have been determined and fully assigned. The spectral data confirm, in some cases decisively, the formulation of members of this series of compounds. In the light of the spectral information, the stereochemistry of the C(4)-C(5)-region of the diisophorone ring-system is discussed, with special reference to the configuration of the 4-substituents.

---

Diisophorone und verwandte Verbindungen, 14. Mitt.:¹³C-NMR Spektren von Diisophoron-carbonsäuren

Zusammenfassung Die¹³C-Kernresonanzspektren einer Anzahl von Diisophoron-carbonsäuren wurden aufgenommen und die Signale den Atomen des Kohlenstoffgerüstes zugeordnet. Die so erhaltenen Beziehungen ermöglichen ihrerseits die Bestätigung — und in gewissen Fällen die entscheidende Sicherung — der Struktur weiterer Beispiele dieser Verbindungsreihe. Die sterische Anordnung des C(4)-C(5)-Bereiches im Diisophoron-Ring-System, insbesondere die Konfiguration von 4-Substituenten, wird an Hand der spektroskopischen Ergebnisse erörtert.

     

Cobalt(II) chloro complexation in N-methylformamide–N, N-dimethylformamide mixtures

Cobalt(II) chloro complexation has been studied by titration calorimetry and spectrophotometry in solvent mixtures of N-methylformamide (NMF) and N,N-dimethylformamide (DMF). It revealed that a series of mononuclear CoCln_n ^(2–n)+ (n=1–4) complexes are formed in the mixtures of NMF mole fraction x _NMF=0.05 and 0.25, and the CoCl⁺, CoCl₃ ^– and CoCl₄ ^2– complexes in the mixture of x _NMF=0.5, and their formation constants, enthalpies and entropies were obtained. As compared with DMF, the complexation is markedly suppressed in the mixtures, as well as in NMF. The decreasing formation constant of CoCl⁺ with the NMF content is mainly ascribed to the decreasing formation entropy. DMF is aprotic and thus less-structured, whereas NMF is protic to form hydrogen- bonded clusters. In DMF-NMF mixtures, solvent clusters in neat NMF are ruptured to yield new clusters involving DMF, the structure of which depends on the solvent composition. The entropy of formation of CoCl⁺ will be discussed in relation to the liquid structure of DMF, NMF and their mixtures.     

Thermal analysis of transition metal salts of carboxylic acids

The thermal decomposition of salts (both normal and acid) of transition metals with carboxylic acids (maleic, ortho-phthalic and terephthalic) was studied in inert atmosphere. The residues after pyrolysis (up to 450°C) are composites including two structural components: an organic polymer matrix and spherical conglomerates from metal grains coated with polymer. Thermal decomposition of solid solutions of metal bimaleates (Co-Ni, Fe-Ni, Zn-Ni) was investigated. Thermogravimetric data (obtained at different rates of linear heating) were processed with 'Netzsch Thermokinetics' computer program. Kinetic parameters were calculated only for the first decomposition step, and the process is described by Prout-Tompkins equation of n ^th order with autocatalysis. Some properties of the resulting composites have been studied qualitatively. This revised version was published online in July 2006 with corrections to the Cover Date.     

Formation Thermodynamics of Binary and Ternary Lanthanide(III) Complexes with 1,10-Phenanthroline and Chloride in N,N-Dimethylformamide

Formation thermodynamics of binary and ternary lanthanide(III) (Ln = La, Ce, Nd, Eu, Gd, Dy, Tm, Lu) complexes with 1,10-phenanthroline (phen) and the chloride ion have been studied by titration calorimetry and spectrophotometry in N,N-dimethyl-formamide (DMF) containing 0.2 mol-dm^–3 (C₂H₅)₄NClO₄ as a constant ionic medium at 25°C. In the binary system with 1,10-phenanthroline, the Ln(phen)³⁺ complex is formed for all the lanthanide(III) ions examined. The reaction enthalpy and entropy values for the formation of Ln(phen)³⁺ decrease in the order La > Ce > Nd, then increase in the order Nd < Eu < Gd < Dy, and again decrease in the order Dy > Tm > Lu. The variation is explained in terms of the coordination structure of Ln(phen)³⁺ that changes from eight to seven coordination with decreasing ionic radius of the metal ion. In the ternary Ln³⁺-Cl^–-phen system, the formation of LnCl(phen)²⁺, LnCl₂(phen)⁺, and LnCl₃(phen) was established for cerium(III), neodymium(III), and thulium(III), and their formation constants, enthalpies, and entropies were obtained. The enthalpy and entropy values are also discussed from the structural point of view.     

Crown Ether Complexes of Six-Membered N-heteroaromatic Cations

Crown ether complexes of six-membered N-heteroaromatic cations and the closely related bicyclic purinium cation (6) have been studied by ¹H NMR, mass spectrometric and crystallographic methods. The stability constants for the complexes were determined by ¹H NMR titration in acetonitrile solution and the complexation stoichiometry by ¹H NMR and ESI mass spectrometric methods. Altogether six crystal structures of complexes were determined to study the complexation in the solid state. Hydrogen bonding was observed to be the most important interaction for the complexation both in solution and in the solid state but – interactions also contribute to it. All crystal structures of the DB18C6 complexes with six-membered N-heteroaromatic cations, except for 4-hydroxypyridinium, are isomorphous to previously studied five-membered N-heteroaromatic cations and pyridinium complexes. Such a close resemblance is not observed in B18C6 and 18C6 complexes or DB18C6purinium (6).     

Simultaneous GC-MS quantitation of phosphoric, aliphatic and aromatic carboxylic acids, proline and hydroxymethylfurfurol as their trimethylsilyl derivatives: In model solutions II

Summary Fragmentation patterns and quantitation possibilities of gas chromatography-mass spectrometry (GC-MS) with Ion Trap Detection (ITD) are reported for the trimethylsilyl (TMS) derivatives of selected aliphatic and aromatic/cyclohexanoic, mono-, di- and polyhydroxy/methoxy carboxylic acids,o-phosphoric acid, proline and 5-hydroxymethylfurfurol (HMF)— (common in natural matrices, such as fruits, honey etc.). In order to maintain stability of derivatives, their stock solutions were diluted with hexamethyldisilazane. Quantitation was carried out simultaneously on the basis both of the total ion current (TIC) and selective fragment ion (SFI) values. Data obtained proved that (i) the fragmentation of different TMS acids provided very informative, utilizable characteristics, that were also suitable for quantitation; (ii) the type of fragments do not differ in their m/z values compared to those obtained in the Mass Spectral Database; (iii) the advantages of ITD due to its ‘soft’ fragmentation feature resulted in higher abundance of characteristic ions , ([M−CH₃]⁺, [M+1]⁺, [M+TMS]⁺, [M+2TMS]⁺) compared to the non characteristic reagent ones (at m/z=73,147). Determination of oxalic, glycolic, pyruvic, levulinic, succinic, malic, pimelic, tartaric, citric, palmitic, oleic, stearic, arachidic, shikimic, quinic, chlorogenic acids, as well as those ofo-phosphoric acid, HMF and proline have been carried out in the concentration range of 1–20 ng of compounds. Reproducibility on the basis of TIC and SFI values, in the order listed, proved to be 0.8–8.6% and 1.3–16.0% (relative standard deviation percentages). Presented at: Balaton Symposium on High-Performance Separation Methods, Siófok, Hungary, September 3–5, 1997     

Facile reaction of carboxylic acids with isonitriles in toluene

Isonitriles react with low concentrations of carboxylic acids in toluene at 110 °C to give N-formylamides in yields generally above 70%. These concentrations can be obtained either by syringe pump addition of a toluene solution of the acid, or by using a suspension of the acid if it has limited solubility in toluene at room temperature.