A lattice Boltzmann method for thermal nonideal fluids

A Lattice Boltzmann Method for van der Waals fluids with variable temperature is described. Thermo-hydrodynamic equations are correctly reproduced at second order of a Chapman-Enskog expansion. The method is applied to study initial stages of phase separation of a fluid quenched by contact with colder walls. Thermal equilibration is favoured by pressure waves which propagate with the sound velocity.     

Multiple-relaxation-time lattice Boltzmann model for compressible fluids

We present an energy-conserving multiple-relaxation-time finite difference lattice Boltzmann model for compressible flows. The collision step is first calculated in the moment space and then mapped back to the velocity space. The moment space and corresponding transformation matrix are constructed according to the group representation theory. Equilibria of the nonconserved moments are chosen according to the need of recovering compressible Navier-Stokes equations through the Chapman-Enskog expansion. Numerical experiments showed that compressible flows with strong shocks can be well simulated by the present model. The new model works for both low and high speeds compressible flows. It contains more physical information and has better numerical stability and accuracy than its single-relaxation-time version.     

A lattice Boltzmann method for nonlinear disturbances around an arbitrary base flow

In this paper we address the problem of the time evolution of a perturbation around a steady base flow with the use of the lattice Boltzmann method (LBM). This approach, named base flow lattice Boltzmann method, is of great interest in particular for aeroacoustic fields where the acoustic perturbation, on the one hand, is almost exclusively influenced by the large scale average structures of the underlying flow, and on the other hand, has a low effect on the large structures. The method is implemented for weakly compressible flows and the results of the base flow lattice Boltzmann are compared with the standard single relaxation time LBM. The boundary conditions for the base flow lattice Boltzmann method are discussed, as well as the implementation of outflow conditions for acoustic waves.     

Dynamic simulation of multi-component viscoelastic fluids using the lattice Boltzmann method

We develop a discrete model for multi-component viscoelastic fluids based on the lattice Boltzmann method. The model newly introduces the kinetics of polymers so that viscoelasticity is included. We perform three-dimensional simulations of a Newtonian drop in shear flow of a viscoelastic fluid in order to investigate the validity of the current model. In the investigation, effects of viscoelasticity on deformation and orientation of drops are evaluated. The simulation results are compared with experimental measurements quantitatively, and they show good agreement with each other.     

A multicomponent multiphase lattice Boltzmann model with large liquid–gas density ratios for simulations of wetting phenomena

A multicomponent multiphase(MCMP) pseudopotential lattice Boltzmann(LB) model with large liquid–gas density ratios is proposed for simulating the wetting phenomena. In the proposed model, two layers of neighboring nodes are adopted to calculate the fluid–fluid cohesion force with higher isotropy order. In addition, the different-time-step method is employed to calculate the processes of particle propagation and collision for the two fluid components with a large pseudoparticle mass contrast. It is found that the spurious current is remarkably reduced by employing the higher isotropy order calculation of the fluid–fluid cohesion force. The maximum spurious current appearing at the phase interfaces is evidently influenced by the magnitudes of fluid–fluid and fluid–solid interaction strengths, but weakly affected by the time step ratio.The density ratio analyses show that the liquid–gas density ratio is dependent on both the fluid–fluid interaction strength and the time step ratio. For the liquid–gas flow simulations without solid phase, the maximum liquid–gas density ratio achieved by the present model is higher than 1000:1. However, the obtainable maximum liquid–gas density ratio in the solid–liquid–gas system is lower. Wetting phenomena of droplets contacting smooth/rough solid surfaces and the dynamic process of liquid movement in a capillary tube are simulated to validate the proposed model in different solid–liquid–gas coexisting systems. It is shown that the simulated intrinsic contact angles of droplets on smooth surfaces are in good agreement with those predicted by the constructed LB formula that is related to Young's equation. The apparent contact angles of droplets on rough surfaces compare reasonably well with the predictions of Cassie's law. For the simulation of liquid movement in a capillary tube, the linear relation between the liquid–gas interface position and simulation time is observed, which is identical to the analytical prediction. The simulation results regarding the wetting phenomena of droplets on smooth/rough surfaces and the dynamic process of liquid movement in the capillary tube demonstrate the quantitative capability of the proposed model.     

Finite difference lattice Boltzmann method with arbitrary specific heat ratio applicable to supersonic flow simulations

The current finite difference lattice Boltzmann method (FDLBM) gives a fixed specific heat ratio because internal energy is limited to the translational freedom of the space. Yan et al. and Kataoka et al. clarified the conditions for deriving models with arbitrary specific heat ratio and proposed Euler models. However, these model applications to numerical simulations showed the weakness in the numerical stability. In this paper, a two-dimensional FDLBM Navier Stokes model and a three-dimensional FDLBM Euler model, which allow arbitrary values to be set for the specific heat ratio, were proposed. These models stably performed numerical simulations from subsonic to supersonic ranges.     

Algorithm to implement unsteady jump boundary conditions within the lattice Boltzmann method

The European Physical Journal E - Three recently observed facts of the translocation of actual hexameric and nonstructural (NS) helicases are related to the various physical quantities and are in...     

Immiscible multicomponent lattice Boltzmann model for fluids with high relaxation time ratio

An immiscible multicomponent lattice Boltzmann model is developed for fluids with high relaxation time ratios, which is based on the model proposed by Shan and Chen (SC). In the SC model, an interaction potential between particles is incorporated into the discrete lattice Boltzmann equation through the equilibrium velocity. Compared to the SC model, external forces in our model are discretized directly into the discrete lattice Boltzmann equation, as proposed by Guo et al. We develop it into a new multicomponent lattice Boltzmann (LB) model which has the ability to simulate immiscible multicomponent fluids with relaxation time ratio as large as 29.0 and to reduce ‘spurious velocity’. In this work, the improved model is validated and studied using the central bubble case and the rising bubble case. It finds good applications in both static and dynamic cases for multicomponent simulations with different relaxation time ratios.     

A mean-field free energy lattice Boltzmann model for multicomponent fluids

We propose a mean-field free energy approach to simulate multi- component fluids. The model has been validated in terms of the Laplace equation of capillarity and dispersion relation of interfacial waves. Simulations of a ternary system shows that the total free energy decreases and reaches a minimum after phase separation has occurred. Different drop shapes can be obtained by adjusting the interaction strengths between individual components. These results demonstrate that both macroscopic free energy and microscopic fluid-fluid interactions have been well described in our multicomponent model.     

On the lattice Boltzmann method for phonon transport

The lattice Boltzmann method is a discrete representation of the Boltzmann transport equation that has been employed for modeling transport of particles of different nature. In the present work, we describe the lattice Boltzmann methodology and implementation techniques for the phonon transport modeling in crystalline materials. We show that some phonon physical properties, e.g., mean free path and group velocity, should be corrected to their effective values for one- and two-dimensional simulations, if one uses the isotropic approximation. We find that use of the D2Q9 lattice for phonon transport leads to erroneous results in transient ballistic simulations, and the D2Q7 lattice should be employed for two-dimensional simulations. Furthermore, we show that at the ballistic regime, the effect of direction discretization becomes apparent in two dimensions, regardless of the lattice used. Numerical methodology, lattice structure, and implementation of initial and different boundary conditions for the D2Q7 lattice are discussed in detail.     

A lattice Boltzmann method for incompressible two-phase flows on partial wetting surface with large density ratio

This paper reports a new numerical scheme of the lattice Boltzmann method for calculating liquid droplet behaviour on particle wetting surfaces typically for the system of liquid–gas of a large density ratio. The method combines the existing models of Inamuro et al. [T. Inamuro, T. Ogata, S. Tajima, N. Konishi, A lattice Boltzmann method for incompressible two-phase flows with large density differences, J. Comput. Phys. 198 (2004) 628–644] and Briant et al. [A.J. Briant, P. Papatzacos, J.M. Yeomans, Lattice Boltzmann simulations of contact line motion in a liquid–gas system, Philos. Trans. Roy. Soc. London A 360 (2002) 485–495; A.J. Briant, A.J. Wagner, J.M. Yeomans, Lattice Boltzmann simulations of contact line motion: I. Liquid–gas systems. Phys. Rev. E 69 (2004) 031602; A.J. Briant, J.M. Yeomans, Lattice Boltzmann simulations of contact line motion: II. Binary fluids, Phys. Rev. E 69 (2004) 031603] and has developed novel treatment for partial wetting boundaries which involve droplets spreading on a hydrophobic surface combined with the surface of relative low contact angles and strips of relative high contact angles. The interaction between the fluid–fluid interface and the partial wetting wall has been typically considered. Applying the current method, the dynamics of liquid drops on uniform and heterogeneous wetting walls are simulated numerically. The results of the simulation agree well with those of theoretical prediction and show that the present LBM can be used as a reliable way to study fluidic control on heterogeneous surfaces and other wetting related subjects.     

Saturation of the relavistic beam-plasma instability for arbitrary density ratios

The nonlinear saturation level W_s of the one-dimensional beam-plasma instability was calculated as a function of beam energy γ₀ for all values of beam/plasma density ratio η. For η ? 0.01, W_sdecreases with increasing γ₀.     

Factorization symmetry in the lattice Boltzmann method

A non-perturbative algebraic theory of the lattice Boltzmann method is developed based on the symmetry of a product. It involves three steps: (i) Derivation of admissible lattices in one spatial dimension through a matching condition which imposes restricted extension of higher-order Gaussian moments, (ii) A special quasi-equilibrium distribution function found analytically in closed form on the product-lattice in two and three spatial dimensions, and which proves the factorization of quasi-equilibrium moments, and (iii) An algebraic method of pruning based on a one-into-one relation between groups of discrete velocities and moments. Two routes of constructing lattice Boltzmann equilibria are distinguished. The present theory includes previously known limiting and special cases of lattices, and enables automated derivation of lattice Boltzmann models from two-dimensional tables, by finding the roots of one polynomial and solving a few linear systems.     

Pseudopotential multi-relaxation-time lattice Boltzmann model for cavitation bubble collapse with high density ratio

The dynamics of the cavitation bubble collapse is a fundamental issue for the bubble collapse application and prevention. In the present work, the modified forcing scheme for the pseudopotential multi-relaxation-time lattice Boltzmann model developed by Li Q et al. [ Li Q, Luo K H and Li X J 2013 Phys. Rev. E 87 053301] is adopted to develop a cavitation bubble collapse model. In the respects of coexistence curves and Laplace law verification, the improved pseudopotential multi-relaxation-time lattice Boltzmann model is investigated. It is found that the thermodynamic consistency and surface tension are independent of kinematic viscosity. By homogeneous and heterogeneous cavitation simulation, the ability of the present model to describe the cavitation bubble development as well as the cavitation inception is verified. The bubble collapse between two parallel walls is simulated. The dynamic process of a collapsing bubble is consistent with the results from experiments and simulations by other numerical methods. It is demonstrated that the present pseudopotential multirelaxation-time lattice Boltzmann model is applicable and efficient, and the lattice Boltzmann method is an alternative tool for collapsing bubble modeling.     

凝固前沿和气泡相互作用的大密度比格子玻尔兹曼方法模拟

建立了二维双组分两相流的大密度比格子玻尔兹曼方法 (lattice Boltzmann method, LBM)模型. 该模型基于改进的Shan-Chen伪势多相流LBM模型, 结合采用不同时间步长的方法, 实现密度比达800以上的气液两相流模拟. 为了对模型进行验证, 模拟了在不同气液相互作用系数和密度比条件下气泡内外压力差与其半径之间的关系, 其结果满足Laplace定律. 将所建立的大密度比LBM与介观尺度的元胞自动机(cellular automaton, CA)和有限差分法(FDM)相耦合, 用LBM模拟气液两相流, 用CA方法模拟固相生长, 用有限差分法模拟温度场, 采用LBM-CA-FDM耦合模型对定向凝固过程中凝固前沿的气泡与液-固界面之间的相互作用进行模拟研究. 结果表明, 绝热气泡的存在影响了温度场分布, 使得凝固前沿接近气泡时, 液-固界面凸起, 在不同的固相生长速度条件下, 出现凝固前沿淹没气泡或气泡脱离凝固前沿的不同情况, 模拟结果与实验结果符合良好. 关键词： 格子玻尔兹曼方法 元胞自动机 凝固 气泡     

A curved no-slip boundary condition for the lattice Boltzmann method

We present a generalization of the no-slip boundary condition by Lätt et al. [J. Lätt, B. Chopard, O. Malaspinas, M. Deville, A. Michler, Straight velocity boundaries in the lattice Boltzmann method, Physical Review E 77 (5) (2008) 056703] from straight to curved geometries for the lattice Boltzmann Bhatnager–Gross–Krook method (LBGK). The boundary condition is based on a reconstruction of the populations from the density, velocity and rate of strain. For curved boundaries, the reconstruction reduces the question of accuracy to a technical issue of interpolation. We present a method of interpolation allowing a very accurate representation of the curved boundary. The resulting boundary condition is verified for three different test cases: Taylor–Couette flow in-between rotating cylinders, laminar flow around a cylinder and flow past an impulsively started cylinder, demonstrating its second order accuracy and low error constant. The present boundary is stable for relaxation frequencies close to two.     

A multiple-relaxation-time lattice Boltzmann method for high-speed compressible flows

This paper presents a coupling compressible model of the lattice Boltzmann method. In this model, the multiplerelaxation-time lattice Boltzmann scheme is used for the evolution of density distribution functions, whereas the modified single-relaxation-time(SRT) lattice Boltzmann scheme is applied for the evolution of potential energy distribution functions. The governing equations are discretized with the third-order Monotone Upwind Schemes for scalar conservation laws finite volume scheme. The choice of relaxation coefficients is discussed simply. Through the numerical simulations,it is found that compressible flows with strong shocks can be well simulated by present model. The numerical results agree well with the reference results and are better than that of the SRT version.     

Three-dimensional multi-relaxation-time lattice Boltzmann front-tracking method for two-phase flow

We developed a three-dimensional multi-relaxation-time lattice Boltzmann method for incompressible and immiscible two-phase flow by coupling with a front-tracking technique. The flow field was simulated by using an Eulerian grid, an adaptive unstructured triangular Lagrangian grid was applied to track explicitly the motion of the two-fluid interface, and an indicator function was introduced to update accurately the fluid properties. The surface tension was computed directly on a triangular Lagrangian grid, and then the surface tension was distributed to the background Eulerian grid. Three benchmarks of two-phase flow, including the Laplace law for a stationary drop, the oscillation of a three-dimensional ellipsoidal drop,and the drop deformation in a shear flow, were simulated to validate the present model.     

Multi-relaxation-time lattice Boltzmann front tracking method for two-phase flow with surface tension

<正>In this paper,an improved incompressible multi-relaxation-time lattice Boltzmann-front tracking approach is proposed to simulate two-phase flow with a sharp interface,where the surface tension is implemented.The lattice Boltzmann method is used to simulate the incompressible flow with a stationary Eulerian grid,an additional moving Lagrangian grid is adopted to track explicitly the motion of the interface,and an indicator function is introduced to update the fluid properties accurately.The interface is represented by using a four-order Lagrange polynomial through fitting a set of discrete marker points,and then the surface tension is directly computed by using the normal vector and curvature of the interface.Two benchmark problems,including Laplace’s law for a stationary bubble and the dispersion relation of the capillary wave between two fluids are conducted for validation.Excellent agreement is obtained between the numerical simulations and the theoretical results in the two cases.     

任意复杂流-固边界的格子Boltzmann处理方法

本文提出了一种适用于流固耦合领域中任意复杂边界条件的lattice Boltzmann处理方法.该方法基于half-way反弹模型,在流固耦合处构建了一层虚拟边界,并结合有限差分的方法,获取虚拟边界上的变量值.改进后的方法确保了粒子反弹位置与宏观速度采集点的位置相同,计入了实际物理边界与网格线不重合时,偏移量对计算结果的准确影响,而且其适用范围被扩展到了任意静止或运动、平直或弯曲的复杂边界.文中研究了该方法在Poiseuille流、圆柱绕流和Couette流等经典条件下的边界处理能力,结果表明该方法与理论值符合良好,且当实际物理边界与网格线不重合时,与已发表文献中的结果相比,具有更高的精度.