Morphology-shrinkage relationships in semi-crystalline polymers. Epitaxy,a way of eliminating amorphous contribution

A new approach for achieving a highly dimensionally stable film of semi-crystalline polymers via blending is demonstrated. To illustrate this approach, a model system, polyethylene-polypropylene is investigated using TEM, TMA, DSC, and DMA. It is shown that epitaxial growth in polymer blends and laminates can induce a cross-hatch morphology which eliminates or reduces the contribution of an oriented amorphous phase. This ultimately leads to greater dimensional stability and synergism in mechanical properties as well. The presence of an appropriate low-melting component can also be used to reduce shrinkage.     

Drawing and dynamic-mechanical behavior of syndiotactic polystyrene an introduction

The drawing behavior of syndiotactic polystyrene was analyzed at different temperatures. Amorphous films were used and, depending on drawing temperature, strain-induced or thermal-induced cold crystallization was observed. This phenomenon, when present, greatly affects the drawing behavior. The dynamic-mechanical behavior of drawn samples was analyzed, and the obtained results indicate that the glass transition is affected by drawing, and that the effect depends drastically on the drawing temperature. Particularly interesting is the dynamic behavior at high temperature where the elastic modulus is weakly affected by temperature also near the melting point.     

Recent development in dielectric relaxation spectroscopy of polymers

An evaluation strategy for dielectric measurements in the frequency and/or time domain is presented which provides complete information about a relaxation mechanism (intensity, position, and shape of the relaxation function) independent of overlapping with neighboring mechanisms. As an example results on poly-(ethyleneterephthalate) are given.     

Drawing behavior of cross-linked isotactic polypropylene

The drawing behavior of cross-linked isotactic polypropylene was analysed. The crystallinity and the composition of the crystalline phase are affected by cross-linking. Structural and topological features play a significant role in the drawing behavior. The yielding, the necking phenomenon, and the ultimate properties, i.e., stress and strain at the fracture, can be correlated with the sample structure. The general picture agrees well with Peterlin's model of cold drawing.     

Solution behavior of two liquid crystalline polymers of different architectures

Solutions of two different liquid crystalline polymers of high molecular weight are investigated by static and dynamic light scattering (LS), membrane osmometry and size-exclusion chromatography (SEC). Measurements in dilute solution in different solvents showed no specific behavior as formation of aggregates or chain stiffening. Large discrepancies between the LS results and the results from osmometry and SEC show that the latter methods are in the present cases not suitable for molecular weight determination. In semi-dilute solution the osmotic modulus and the time correlation function were studied. Behavior of flexible chains was observed. In one system a slight aggregation of small molecules onto longer chains was found causing less interpenetration of the chains in that solvent. At moderately high concentrations cluster formation was observed from i) a small angle excess scattering, ii) a downturn of the osmotic modulus, and iii) the appearance of a slow motion in the time-correlation function.     

The salt-induced sphere-rod transition of micelles of dodecylpyridinium iodide in aqueous NaI solutions

Static light scattering has been measured on aqueous NaI solutions of dodecylpyridinium iodide (DPI) over NaI concentrations from 0 to 0.05 M. Reduced intensity of scattered light increases with increasing DPI concentration above the critical micelle concentration. The Debye plot is generally a curve with an initially positive slope and with a weakly convex, upward curvature, when the NaI concentration ranges from 0 to 0.005 M. The molecular weight of the spherical micelle of DPI is 28400 in water, and it increases slightly with increasing NaI concentration. The initial slope decreases with increasing NaI concentration and changes from positive to negative across 0.007 M NaI, which is the threshold for the sphere-rod transition and where the micelle has a molecular weight of 34400. At NaI concentrations from 0.01 to 0.05 M, the Debye plot is a curve with an initially negative slope and with a convex, downward curvature. The magnitudes of slope and curvature are larger, and the rodlike micelles of DPI have larger molecular weight and stronger mutual interaction, as the NaI concentration increases. The linear double logarithmic relationship between molecular weight and ionic strength holds for spherical and rodlike micelles, respectively.     

Melt drawing as a route to high performance polyethylene

Well established routes for obtaining stiff and strong polyethylene (PE) involve solid state drawing either of solution crystallized gel films or melt crystallized spherulitic PE. The aim of this work is to show the potential of melt deformation as an alternative route for obtaining highly oriented products. Our previous work on the melt deformation route showed that oriented PE fibers could be directly extruded under appropriately controlled conditions [8,9]. Here, we show that PE films (or filaments) can also be melt drawn in the temperature window 130–160 °C, thus yielding oriented products. The advantage of melt drawing over direct melt extrusion is that it allows a wider operational latitude and thus does not require such carefully controlled conditions.The morphology produced by melt deformation is different from solid state deformation and consists of extended chain fibrils with platelet overgrowths. The relative amount of fibrils and platelets depends on operating parameters. The temperature window of PE melt drawing is identified with the regime where some flow induced crystallization takes place. The conditions for melt drawability are of wider generality for crystallizable flexible chain polymers. They are: (i) adequate strain rate to overcome entropie resistance to chain extension, (ii) but not high enough to activate the elastic response of the transient networks in the entangled system, (iii) sufficient strain to fully extend the chain, (iv) appropriate temperature for flow-induced crystallization and strain hardening, and (v) cooling to freeze the oriented structure.Ultra high molecular weight PEs were not the most suitable for melt drawing due to their high recoverable elongation in the melt (melt elasticity) in addition to added limitations imposed by their nascent grain systeme. Our work suggests that an optimum molecular weight for melt drawing is¯M _w(400–900)×10³ with further possibilities for improvement through multimodal distributions.     

Morphology and optical properties of liquid crystals embedded in polyester resin matrix

This paper reports on morphological, thermo-optical, and electro-optical results of UV-cured polyester resin film containing liquid-crystal nematic and cholesteric domains. Electro-optic measurements were performed in an applied d.c. electric field. The morphological structure of PDLC film is modified by the various methods of their preparation. Size-distribution curves drawn vs the duration of the initial cooling obtained for cholesteric liquid crystal domains are presented.     

Melting temperature of colloidal crystals of monodisperse silica spheres in ethanol-water and ethylene glycol-water mixtures

The melting temperature (T _m) of colloidal crystals of monodisperse silica spheres in ethanol-water and ethylene glycol-water suspensions has been measured by reflection spectroscopy. A sphere of 110 nm in diameter and 0.041 in monodispersity index is used after purification and deionization processes. Transformation from the body-centered cubic lattice to the face-centered cubic lattice subphases is observed as the suspension temperature rises, which is similar to the purely aqueous suspension of the same sphere. A phase diagram including liquid-like and crystal-like structures is obtained in the presence of ion-exchange resins coexisted. The data ofT _m are analyzed successfully with the theory of Williams, Crandall, and Wojtowicz. The heat of melting decreases by the addition of ethanol or ethylene glycol in the mixtures.     

Investigations of a series of nonionic surfactants of sugar-lipid hybrids by light scattering and electron microscopy

Sugar-lipid hybrids of the type C_nC_m were prepared by coupling an alkane chain (C_n) with a maltooligosaccharide (G_m) over an amide linkage. Coupling was performed with maltobionolactone (G₂) and n-alkylamine chains C_n withn=8,10,12,14,16, i.e. variation of the hydrophobic part of the molecule, and with hexadecylamine (C₁₆) and different maltooligosaccharides (G_m, m=2,3,4,6). The solution properties of the various products were studied by means of static and dynamic light scattering (LS) and by electron-microscopy (EM).The results may be summarized as follows: If the alkane chain is shorter thann=14, small spherical micelles with a radius of about 3 nm are observed. In time these micelles aggregate further to form increasingly larger spherical clusters which eventually precipitate. Long rod-like micelles form whenn 14. Contour length and chain stiffness were determined by applying theories of semiflexible chains. A qualitative confirmation of the light scattering results, i.e., micelle size and shape, was obtained from electron microscopy.     

The action of indomethacin on neutral and positively charged monolayers

The penetration ability of indomethacin in neutral and positively charged monolayers has been studied. Neutral monolayers of cholesterol and dipalmitoyl phosphatidyl choline present a slight but significant increase of surface pressure. The presence of stearylamine in the films results in an increase of surface pressure due to an electrostatic effect between the carboxylic anion of indomethacin and the polar head group of the stearylamine. These values can afford a reference point to choose the best lipid composition of liposomes encapsulating indomethacin to avoid the drug causing leakage of liposomes.     

The lamellar phase of the sodium dodecylsulfate/decanol/toluene/formamide system: NMR and phase studies of solubilization

The phase behavior of the system sodium dodecylsulfate/decanol/toluene/ formamide was investigated and pseudo-ternary diagrams established. In particular, the effect of varying the amount of toluene in the system on the stability of the lamellar phase region was studied in detail. Deuterium NMR and low-angle x-ray diffraction measurements showed that more toluene was distributed between the surfactant chains as the amount of decanol in the system is reduced, resulting in a more disordered dynamic structure in the bilayers. Similarly, increased formamide content lead to greater penetration of the toluene into the bilayer and more disorder. Both factors were found to be instrumental in decreasing the stability of the lamellar structure.     

Strength of fibers from wholly aromatic polyesters

A theory of the strength (or the tenacity) of highly oriented Liquid Crystal Polymer (LCP) fibers was developed, and its results were compared with existing tensile strength data of fibers of a copolymer of 1,4-oxybenzoate and 6,2-oxynaphthoate. A basic premise of the theory is that the mechanical load transfer between polymer chains is through intermolecular interaction which acts in a manner similar to that of shear stress, and that the fiber strength is primarily governed by the intermolecular adhesion strength. The theory also incorporates the effects of MW, MW distribution, and the chain orientation distribution. Analysis of the experimental tenacity data demonstrates that the present theory can quantitatively describe the variation of the tenacity of LCP fibers with MW both in the as-spun and in the heat-treated states. The theory further predicts that the predominant factor governing the tenacity of LCP fibers is primarily due to MW increase due to solid-state polymerization. It is also demonstrated that the intermolecular adhesion between LCP chains is relatively weak and does not improve with heat treatment. The absence of factors that limit the MW increase (i.e, imbalanced end-groups and side reactions of end groups) is a prerequisite for fast heat treatment of a LCP fiber to a high tenacity.Symbols A _f the cross-sectional area of a single polymer chain - E _f the theoretical modulus of a polymer chain - G _m the shear modulus of fiber - h(l) the chain length distribution function - l the chain length - l the number average chain length - l _c the length of chain units that are bonded to adjacent polymer chains - n ² 4G _m/CE_f - N _c the number of polymer chains per unit area perpendicular to the fiber axis - P _b the probability that a chain does not have a chain end in the fracture zone - P _e the probability that a chain has, at least, a chain end in the fracture zone - q _e,q _b the probability of finding an ending and a bridging polymer chain, respectively, in the fracture zone - l the length of fracture zone - the elongation of a polymer chain - the chain orientation angle - _f the normal stress that acts on a polymer chain - _fu the fiber tenacity - _e the shear stress that acts on a polymer chain surface Dedicated to Prof. Dr. rer. nat. Wolfgang Hilger, Chairman of Hoechst A.G. in honor of his 60th birthday     

A study of the mixing of a liquid into an elastomer

A low-melting alloy was mixed with SBR and carboxy-NBR on a rubber mill above its melting point, and changes in its state of dispersion were examined through an optical microscope. Solution of the resulting mix showed that many of the particles of alloy were of colloid size, and did not settle out. Repeated washing of the sediment with solvent could not separate all the rubber phase from the sediment, and a form of bound rubber is postulated.     

Effects of pressure and solvent on the diffusion of aromatic compounds through polymers

The diffusion of six azo and five anthraquinone derivatives through nylon 6, poly(ethylene terephthalate) and secondary cellulose acetate films were studied under high hydrostatic pressures of up to 3000 bar and at temperatures 80–130 °C, by analyzing the diffusion profiles yielded in a stacked multiple film, placed in the solution of the diffusant. It was found that the diffusion coefficient,D, of the diffusant decreased with increasing pressure, giving a linear relationship between InD and the pressure, the slope of which gave the activation volume for the diffusion,V . It was revealedV increased linearly with increasing intrinsic molecular volume of the diffusant,V _w , the slopes being different between the azo and the anthraquinone derivatives. The ratio ofV toV _w (V /V _w ) ranged from 0.13 to 0.93, depending in a sensitive manner on the degree of swelling of the polymer matrix which in turn was varied by the solvent. The overall results could be explained in accordance with the formulation,V _{f, local} +V =V _w , whereV _{f, local} represents the free volume contribution. It was proposed thatV _w is increased by solvation when the solvent is good for the diffusant.     

Spinodal decomposition of the polymer blend deutereous polystyrene (d-PS) and polyvinylmethylether (PVME) studied with high resolution neutron small angle scattering

Decomposition of a polymer blend in the miscibility gap has been studied by small angle scattering of neutrons, using a double crystal diffractometer. It covers a range of 10^–5 to 10^–3 Å^–1, which connects the region of elastic light scattering and, at the upper end, the region of conventional neutron small angle scattering instruments. The decomposed structure in the miscibility gap can be described by a characteristic lengthR which increases with time,t ^1/3 between 7 and 25 min. At longer times, the growth follows a more linear power law. This behaviour is consistent with predictions of the domain growth for liquid mixtures and is estimated by using the self diffusion constant, viscosity, and the surface energy of the polymer.on leave ESFM-IPN Mexico     

Theoretical study of dielectric behavior of microcapsule suspensions with distributed drug release rate

Theoretical consideration is made concerning the dielectric behavior of aqueous suspensions of W/O-type microcapsules containing aqueous electrolyte solutions, especially concerning distribution effects of the electrolyte release rate on the dielectric behavior.It is shown at first that the distribution of the release rate causes electrical conductivity of the capsule interior. Next, it is deduced, in the light of a theory of the interfacial polarization, that the distribution characteristics of the capsule interior's electrical conductivity are closely related to those of the relaxation time for a dielectric relaxation exhibited by the suspensions. Several formulas are derived to describe the relation between the distribution characteristics of the release rate and those of the relaxation time.     

Structural changes in solvent-induced crystallization of quenched isotactic polypropylene

Solvent-induced crystallization of quenched isotactic polypropylene (iPP) films in dichloromethane, cyclohexane, carbon tetrachloride, and chloroform has been investigated.WAXD, density, and DSC measurements indicate that smectic iPP films undergo a complex rearrangement of the structure in these liquids, leading to a process of crystallization.Transport properties of the dried samples, after the solvent treatment, show that the first stage of crystallization involves, in addition to the smectic phase, a fraction of amorphous phase, while further crystallization regards only the smectic phase.The morphology of the crystallized samples has been investigated by transmission electron microscopy following permanganic etching. No change in the basic morphology is found, although local organization showing splaying and branching appears clearer in the solvent crystallized samples than in the starting smectic sample.     

New conducting polymers, 3. Doping,stability, electrical,and optical characteristics of poly-(P-phenylphosphoethynediyl)

Studies on direct-current electrical conductivity and optical properties of a new solution of processable conducting polymer are reported. Electrical conductivity of thin films of the polymer on glass plate at room temperature was 6×10⁻⁶ S/cm. Study of conductivity with variation of temperature does not provide any definite thermal activation energy, which is in accordance with the amorphous nature of polymer. Optical absorption data adopting the Bardeen equation showed that maximum ‘optical gap’ (E _g ) is 3.30 eV. Doping with Br₂-vapor was found to be only partially effective in decreasingE _g by 0.43 eV. The polymer was found to be quite stable under normal atmospheric conditions. Environmental stability of both undoped and doped polymer has been discussed. Part 2: [5]