碳热还原温度对耐高温纤维增强碳化硅多孔材料组织结构的影响

本研究目的是开发一种耐高温纤维增强碳化硅多孔块状材料。以纤维增强间苯二酚-甲醛/氧化硅复合气凝胶为前驱体,经过1 300~1 500℃碳热还原制备了纤维增强碳化硅多孔材料。采用XRD、SEM、TEM、氮气吸附孔结构分析仪和压汞仪对纤维增强碳化硅多孔材料的物相组成、微观形貌和孔结构进行了表征,结果表明:纤维增强碳化硅多孔材料由β-Si C和莫来石纤维组成,随着碳热还原温度的升高,样品中的Si C纳米晶颗粒团聚成大块,最终在1 500℃生成Si C晶须,升高碳热还原温度会导致样品中大孔的增多和纳米孔的消失以及比表面积的降低。热分析结果表明纤维增强碳化硅多孔材料在空气中的耐温性高达1 300℃。纤维增强碳化硅多孔材料的密度为0.330~0.345 g·cm-3,孔隙率在89%以上,室温下热导率为0.06~0.07 W·m-1·K-1。     

碳热还原温度对耐高温纤维增强碳化硅多孔材料组织结构的影响（英文）

本研究目的是开发一种耐高温纤维增强碳化硅多孔块状材料。以纤维增强间苯二酚-甲醛/氧化硅复合气凝胶为前驱体,经过1 300~1 500℃碳热还原制备了纤维增强碳化硅多孔材料。采用XRD、SEM、TEM、氮气吸附孔结构分析仪和压汞仪对纤维增强碳化硅多孔材料的物相组成、微观形貌和孔结构进行了表征,结果表明:纤维增强碳化硅多孔材料由β-Si C和莫来石纤维组成,随着碳热还原温度的升高,样品中的Si C纳米晶颗粒团聚成大块,最终在1 500℃生成Si C晶须,升高碳热还原温度会导致样品中大孔的增多和纳米孔的消失以及比表面积的降低。热分析结果表明纤维增强碳化硅多孔材料在空气中的耐温性高达1 300℃。纤维增强碳化硅多孔材料的密度为0.330~0.345 g·cm-3,孔隙率在89%以上,室温下热导率为0.06~0.07 W·m-1·K-1。     

用于高性能钠离子电容器的高氮掺杂多孔碳纳米纤维的简易合成

选择合适的生物质材料是获得功能碳材料的有效途径之一。通过柠檬酸钾和三聚氰胺一步热解法制备高氮掺杂多孔碳纳米纤维(NPCF)。在电流密度为0.1和1.0 A·g^-1时,NPCF电极的容量分别为218和140 mAh·g^-1。同时,具有NPCF阳极的钠离子电容器(SIC)在1.0 A·g^-1下表现出优异的倍率性能和超长的使用寿命,可循环超过2 500次。     

用于高性能钠离子电容器的高氮掺杂多孔碳纳米纤维的简易合成

选择合适的生物质材料是获得功能碳材料的有效途径之一。通过柠檬酸钾和三聚氰胺一步热解法制备高氮掺杂多孔碳纳米纤维(NPCF)。在电流密度为0.1和1.0 A·g^-1时,NPCF电极的容量分别为218和140 mAh·g^-1。同时,具有NPCF阳极的钠离子电容器(SIC)在1.0 A·g^-1下表现出优异的倍率性能和超长的使用寿命,可循环超过2 500次。     

自生纳米纤维增强SiO2气凝胶的制备及性能研究

采用溶胶-凝胶法和乙醇超临界干燥工艺制备ZrO_X/SiO₂复合气凝胶,再经1200℃高温热处理得到自生纳米纤维增强SiO₂复合气凝胶。利用扫描电子显微镜、透射电子显微镜、X射线衍射、热重和氮气吸附等手段对气凝胶的结构和性能进行了分析,并且测试了样品的压缩强度及真密度。实验结果表明：自生纳米纤维增强SiO₂复合气凝胶具有均匀的多孔网络结构,锆氧纳米纤维是以化学键连接复合的方式无序穿插在气凝胶中,对复合气凝胶的机械强度和隔热性能有明显的改善。经1200℃热处理后的ZrO_X/SiO₂复合气凝胶比表面积为827.22m₂·g^-1,压缩强度为9.68MPa,真密度为0.23g·cm^-3。     

氮化钨-钨/掺氮有序介孔碳复合材料的制备及其氧还原性能

采用软模板法制备了氮化钨-钨/掺氮有序介孔碳复合材料（WN-W/NOMC）,作为一种高比表面积且价格低廉的阴极氧还原反应催化剂。通过适量添加尿素来改变复合材料中的氮含量,在掺氮量为7%（w/w）时,实验发现材料能够保持完整有序介孔结构,测试其比表面积高达835 m²·g^-1,透射电子显微镜（TEM）测试结果显示其催化颗粒均匀地分散在氮掺杂有序介孔碳载体上。在O₂饱和的0.1 mol·L^-1 KOH溶液中测试了材料的氧还原催化性能（ORR）,显示其起始电位为0.87 V（vs RHE）,极限电流密度为4.49 mA·cm^-2,氧还原反应的转移电子数为3.4,接近于20%（w/w）商业Pt/C的3.8,说明该材料表现出近似4电子的氧还原反应途径。研究结果表明,WN-W/NOMC的催化性能虽然稍弱于商业铂碳（0.99 V,5.1 mA·cm^-2）,但其具有远超铂碳的循环稳定性和耐甲醇毒化能力。     

用于高性能锂硫电池的二维氮硫共掺杂多孔碳纳米片的快速合成

本工作基于工业炼油产品沥青,开发了一种无金属、氮和硫共掺杂多孔碳纳米片（NSPC）的合成方法。获得的多孔碳纳米片具有高比表面积（339 m²·g^-1）和优异的固硫能力。同时,高含量氮、硫共掺杂可以有效增强碳材料的导电性,同时促进多硫化物的高效催化转化。通过熔融法固硫后,制备得到的NSPC/S电极具有较高的比容量和优异的循环稳定性（在0.6C电流密度下,200次循环后容量为762 mAh·g^-1）,实现了高含量氮和硫共掺杂的二维多孔碳材料的快速批量生产并用于高性能锂硫电池正极材料。     

Mn4+掺杂Co3O4纳米纤维的静电纺丝法制备及其电化学性能

通过静电纺丝法制备Mn⁴⁺掺杂的Co₃O₄复合纳米纤维,利用XRD、XPS、BET、SEM和电化学工作站等对材料的结构、成分、形貌和电化学性能进行表征与测试。研究发现,通过Mn⁴⁺掺杂,Co₃O₄复合纳米纤维的电化学性能得到明显改善。当n_Co∶n_Mn=20∶2时,相应的复合纤维具有较大比表面积68 m²·g^-1,而且该样品呈现出清晰的氧化还原峰,在1 A·g^-1的电流密度下,放电比电容量为585 F·g^-1,这比纯Co₃O₄纳米纤维的416 F·g^-1,有显著提高;循环500圈电容保持率达到82.6%,而纯Co₃O₄纳米纤维则是76.4%。     

前驱体凝胶中催化剂含量对碳化硅结构和性能的影响

以糠醇为碳源,正硅酸乙酯为硅源,硝酸钴为催化剂,含氢硅油为结构助剂,通过溶胶凝胶和碳热还原的方法制备出高比表面积多孔碳化硅,采用XRD、SEM、TEM、HRTEM和低温氮吸附-脱附对所制备的样品进行表征。结果表明,催化剂用量对碳化硅的堆积缺陷密度、平均晶粒度、比表面积及孔容有重要的影响,多孔碳化硅的比表面积在49~167 m²·g^-1范围内变化。     

低成本硫掺杂多孔碳材料的制备及其超级电容性能

以廉价的胶态二氧化硅为模板，蔗糖为碳源，硫酸为预碳化试剂和硫源，通过硬模板法制备了相对廉价的硫掺杂多孔碳(SSC-T，T℃代表碳化温度)材料。采用多种表征方法对多孔碳材料的微观形貌、孔道结构、比表面积和表面硫物种进行了表征，探究了硫酸和碳化温度对多孔碳材料的微观形貌、孔道结构和比表面积的影响。结果表明，碳化温度对碳的孔结构、比表面积和硫元素的含量有显著的影响，其中900℃碳化得到的样品SSC-900具有最大的比表面积、孔体积和比电容，远高于未加入硫酸制备的碳材料SC-900，表明硫酸的加入可以提高碳材料的比表面积、孔体积，进而提高碳材料的比电容。与昂贵的有序介孔碳CMK-3相比，SSC-900具有成本更低、孔径更大和电容性能更好的优点。在以6.0 mol·L^-1 KOH为电解质的三电极体系中，在0.5 A·g^-1的电流密度下，SSC-900的比电容可以达到357 F·g^-1，而SC-900和CMK-3的比电容分别仅为152和266 F·g^-1。电容贡献分析表明，SSC-900的双层电容值和赝电容值均高于SC-900。此外，SSC-900在0.5 A·g^-1的电流密度下循环10 000次后仍能保持98.4%的初始比电容。     

Dichroism of absorption and polarization of phosphorescence of molecules of the closed form of nitrobenzospirothiopyran

The spectral-polarization characteristics of absorption and phosphorescence of molecules of the initial form of nitro-substituted indolinospirobenzothiopyran were studied in oriented polyethylene films and in solutions with different polarity. An oscillator model of the electron transitions responsible for the formation of absorption and luminescence spectra was suggested. It was established that the principal differences in the spectral and photophysical properties of the compound studied and its oxygen-containing analog are associated with the fact that the electronegativity of the S atom is lower than that of the O atom. Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 6, pp. 1143–1146, June, 1997.     

非那雄胺合成工艺改进

非那雄胺能抑制5α-还原酶的活性,明显降低二氢睾酮水平,是一种治疗良性前列腺增生的有效药品。该合成工艺以甾烯酮酸为原料,将其与氯化亚砜反应,无须分离即与叔丁胺反应得17β-酰胺化合物,再氧化开环,环合,氢化,脱氢合成了非那雄胺。经元素分析、IR、1HNMR、13CNMR、MS分析表征了其结构。该法无须使用昂贵的2,2-二吡啶二硫化物和剧毒药品苯亚硒酸酐,且以乙酸铵代替氨气,降低了对设备的要求和腐蚀,更适用于工业生产。     

Determination of heats of detonation and influence of components of composite explosives on heats of detonation of high explosives

The heats of detonation of 20 simple high explosives and explosive mixtures were determined by means of an adiabatic detonation calorimeter designed by the authors. The results indicated that the performance of the instrument was reliable and the experimental data were very accurate. For explosive mixtures, there was a linear accumulative relationship between the heats of detonation of the explosive mixture and its components. Accordingly, the heats of detonation of explosive mixtures could be calculated directly from the heats of detonation of simple explosives and the characteristic heats of other components. The experiments showed that the gold or brass shell of the cylindrical charge could be substituted by a thick-walled porcelain shell, which had the advantage of cheapness.

     

Synthesis of phenolic components of Grains of Paradise

Two vanilloids, (5E)-8-(4-hydroxy-3-methoxyphenyl)oct-5-en-4-one (1) and 4-[3-hydroxydecyl]-2-methoxyphenol (2), isolated from the dried seeds of Grains of Paradise (Aframomum melegueta), were synthesized; the latter compound was made as the S-enantiomer and the material derived from the seeds was found to be a 1:1.7 mixture of the R and S isomers. The synthetic route used should allow the preparation of analogs having extended alkyl chains and consequently different lipophilicity, and 3, a homolog of 2, was also prepared.     

Summary of development of the theory of stability of colloids and thin films

In this review, the research of the author in the field of colloidal systems is summarized. The factors influencing colloidal stability are systematized and analyzed. Examples are presented to illustrate the practical utilization of the theory of stability of colloids and thin films.This review was prepared on the basis of the works of the author, which were awarded the State Premium for 1991 in the field of science and technology, chemistry section.Institute of Physical Chemistry, Russian Academy of Sciences, 117915 Moscow. Translated from Izvestiya Akademii Nauk, Seriya Khimicheskaya, No. 8, pp. 1708–1717, August, 1992.     

Study of hydration of two cements of different strengths

Main hydration products of two cement pastes, i.e. CSH-gel, portlandite (P) (and specific surface S) were studied by static heating, and by SEM, TEM and XRD, as a function of cement strength (C-33 and C-43) hydration time (th) and subsequent hydration in water vapour.Total change in mass on hydration and air drying, M_o, increased with strength of cement paste and with hydration time. Content of water escaping at 110 to 220°C, defined as water bound with low energy, mainly interlayer and hydrate water, was independent on cement strength but its content increased with (th). Content of chemically bound (zeolitic) water in CSH-gel, escaping at 220-400°C, was slightly dependent on strength and increased with (th). It was possibly derived from the dehydroxylation of CSH-gel and AFm phase. Portlandite water, escaping at 400-500°C, was independent on cement strength and was higher on longer hydration. Large P crystals were formed in the weaker cement paste C-33. Smaller crystals were formed in C-43 but they increased with (th). Carbonate formated on contact with air (calcite, vaterite and aragonite), decomposed in cement at 600-700^oC. It was high in pastes C-33(1 month) and C-43(1 month), i.e. 5.7 and 3.3%, respectively; it was less than 1% after 6 hydration months (low sensitivity to carbonation) in agreement with the XRD study showing carbonates in the air dry paste (1month), and its absence on prolonged hydration (6 months) and on acetone treatment. Water vapour treatment of (6 months) pastes or wetting-drying increased this sensitivity.Nanosized P-crystals, detected by TEM, could contribute to the cement strength; carbonate was observed on the rims of gel clusters.This revised version was published online in November 2005 with corrections to the Cover Date.     

氯氧化镁生成热的研究

用氧化镁氯化镁水溶液制备了8水合氯氧化镁[nMg(OH)2·MgCl2·8H2O], 并测定了其在盐酸中的溶解热, 实验结果表明, 氯氧化镁溶解热与n值呈线性关系, 根据溶解热求出5Mg(OH)2·MgCl2·8H2O和3Mg(OH)2·MgCl2·8H2O的生成热分别为-7727.1和5888.1kJ·mol^1^-。     

Thermodynamics of the formation of oxosulfides of rare-earth elements

The enthalpies of solution of several oxosulfides of rare-earth elements and the high-temperature enthalpies of oxosulfides and oxosulfates of lanthanum and yttrium were measured using solution calorimetry and high-temperature microcalorimetry techniques. Standard enthalpies of formation and some thermodynamic properties of oxosulfides and oxosulfates were calculated. Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 2 pp. 294–297, February, 1997.     

恶臭嗅辨实验室建设探讨

针对恶臭测试的环境影响问题,提出了解决的实例方案,并对方案的要点及优缺点进行讨论,此方案在实际操作中具有较好的效果。