Kinetic Energy Partition Method for Competing Modes

We present a new basis set expansion method for quantum dynamics systems with two competing modes where the interaction potentials are equally dominant. The new idea introduced here is a kinetic energy partition scheme instead of the usual division of the potential energy. The partition results in two kinetic energy terms with their effective masses. By distributing each partial kinetic energy to the respective potential, the full Hamiltonian can be expressed as the sum of the two competing modes. The solution procedure is illustrated by using a system consisting of a particle under the action of two harmonic potentials with different equilibrium distances and force constants. Next we apply this method to obtain the potential energy curves for the prototype hydrogen molecule ion. This new expansion converges very fast to the exact solutions for both eigenvalues and eigenfunctions.     

木材及木制品中残留五氯酚的气相色谱测定法

建立了木材及木制品中五氯酚的气相色谱测定法.样品经丙酮提取,浓硫酸净化,正己烷萃取后吹干,于0.1 mol/L K2CO3的介质中用乙酸酐衍生,采用HP-5毛细管气相色谱柱分离, ECD检测器进行检测.在0.01～50 mg/L的范围内线性关系良好;检出限为0.005 mg/kg;相对标准偏差为2.6%～3.6%;回收率在89.3%～103.5%之间.方法具有灵敏、简便、准确的特点.     

Adsorption in Mixtures with Competing Interactions

A binary mixture of oppositely charged particles with additional short-range attraction between like particles and short-range repulsion between different ones in the neighborhood of a substrate preferentially adsorbing the first component is studied by molecular dynamics simulations. The studied thermodynamic states correspond to an approach to the gas–crystal coexistence. Dependence of the near-surface structure, adsorption and selective adsorption on the strength of the wall–particle interactions and the gas density is determined. We find that alternating layers or bilayers of particles of the two components are formed, but the number of the adsorbed layers, their orientation and the ordered patterns formed inside these layers could be quite different for different substrates and gas density. Different structures are associated with different numbers of adsorbed layers, and for strong attraction the thickness of the adsorbed film can be as large as seven particle diameters. In all cases, similar amount of particles of the two components is adsorbed, because of the long-range attraction between different particles.     

An Investigation of the Trace Element Status of Bison in Wood Buffalo National Park and of Ranch-Raised Bison in Saskatchewan,Canada

Abstract

Trace metal levels were compared in ranched bison receiving a dietary supplement and in wild bison in Wood Buffalo National Park. Data collected in this study were also assessed with regard to information previously published on healthy wild bison resident in the Mackenzie Bison Sanctuary. Ninety percent of ranched animals contained lead, with mean levels of 0.06 and 0.10 ppm in liver and kidney, respectively, while lead was present in only 20% of samples from wild bison. Similarly, arsenic was more prevalent in ranched animals, though at levels below 0.05 ppm. Cadmium levels were significantly higher in the wild bison and traces of mercury were also more prevalent in the wild herd.

Levels of copper, manganese, selenium and zinc, which are considered essential nutrients, showed variations between the ranched and wild bison, but were within the range considered acceptable for cattle, with the exception of selenium. This was found to be lower in the wild herd.

Further research is required to define the nutritional requirements of healthy bison. Variations observed in this investigation could be attributed to a variety of factors, including age, diet, and health status, which cannot be differentiated based on the available samples.     

Competing Channels in Infrared Multiple Photon Decomposition

Infrared multiple photon decompositions (IRMPD) with more than one reactive pathway can provide significantly more kinetic information than can single-channel photolyses. The rates of the competing unimolecular reactions and the rate of photon absorption are interrelated, so that knowledge of one yields information about the others. The goals and pitfalls of IRMPD experiments on several well-studied classes of reactants are reviewed.     

Competing fracture in kinetically controlled transfer printing

Transfer printing by kinetically switchable adhesion to an elastomeric stamp shows promise as a powerful micromanufacturing method to pickup microstructures and microdevices from the donor substrate and to print them to the receiving substrate. This can be viewed as the competing fracture of two interfaces. This paper examines the mechanics of competing fracture in a model transfer printing system composed of three laminates: an elastic substrate, an elastic thin film, and a viscoelastic member (stamp). As the system is peeled apart, either the interface between the substrate and thin film fails or the interface between the thin film and the stamp fails. The speed-dependent nature of the film/stamp interface leads to the prediction of a critical separation velocity above which separation occurs between the film and the substrate (i.e., pickup) and below which separation occurs between the film and the stamp (i.e., printing). Experiments verify this prediction using films of gold adhered to glass, and the theoretical treatment extends to consider the competing fracture as it applies to discrete micro-objects. Temperature plays an important role in kinetically controlled transfer printing with its influences, making it advantageous to pickup printable objects at the reduced temperatures and to print them at the elevated ones.     

Energetics of Competing Chiral Supramolecular Polymers

Chirality can have unexpected consequences including on properties other than spectroscopic. We show herein that a racemic mixture of bis-urea stereoisomers forms thermodynamically stable supramolecular polymers that result in a more viscous solution than for the pure stereoisomer. The origin of this macroscopic property was probed by characterizing the structure and stability of the assemblies. Both racemic and non-racemic bis-urea stereoisomers form two competing helical supramolecular polymers in solution: a double and a single helical structure at low and high temperature, respectively. The transition temperature between these assemblies, as probed by spectroscopic and calorimetric analyses, is strongly influenced by the composition (by up to 70 °C). A simple model that accounts for the thermodynamics of this system, indicates that the stereochemical defects (chiral mismatches and helix reversals) affect much more the stability of single helices. Therefore, the heterochiral double helical structure predominates over the single helical structure (whilst the opposite holds for the homochiral structures), which explains the aforementioned higher viscosity of the racemic bis-urea solution. This rationale constitutes a new basis to tune the macroscopic properties of the increasing number of supramolecular polymers reported to exhibit competing chiral nanostructures.     

Competing non-covalent interactions in alkali metal ion-acetonitrile-water clusters

Competitive ion-dipole, ion-water, and water-water interactions were investigated at the molecular level in M+ (CH3CN)n(H2O)m cluster ions for M = Na and K. Different [n,m] combinations for two different n + m cluster sizes were characterized with infrared predissociation spectroscopy in the O-H stretch region and MP2 calculations. In all cases, no differences were observed between the two alkali metal ions. The results showed that at the n + m = 4 cluster size, the solvent molecules interact only with the ion, and that the interaction between the ion and the large dipole moment of CH3CN decreases the ion-water electrostatic interactions. At the n + m = 5 cluster size, at least two different hydrogen-bonded structures were identified. In these structures, the ion-dipole interaction weakens the ability of the ion to polarize the hydrogen bonds and thus decreases the strength of the water-water interactions in the immediate vicinity of the alkali metal ion.     

Sustainability assessments of bio-based polymers

Bio-based polymers have become feasible alternatives to traditional petroleum-based plastics. However, the factors that influence the sustainability of bio-based polymers are often unclear. This paper reviews published life cycle assessments (LCAs) and commonly used LCA databases that quantify the environmental sustainability of bio-based polymers and summarizes the range of findings reported within the literature. LCA is discussed as a means for quantifying environmental impacts for a product from its cradle, or raw materials extraction, to the grave, or end of life. The results of LCAs from existing databases as well as peer-reviewed literature allow for the comparison of environmental impacts. This review compares standard database results for three bio-based polymers, polylactic acid (PLA), polyhydroxyalkanoate (PHA), and thermoplastic starch (TPS) with five common petroleum derived polymers. The literature showed that biopolymers, coming out of a relatively new industry, exhibit similar impacts compared to petroleum-based plastics. The studies reviewed herein focused mainly on global warming potential (GWP) and fossil resource depletion while largely ignoring other environmental impacts, some of which result in environmental tradeoffs. The studies reviewed also varied greatly in the scope of their assessment. Studies that included the end of life (EOL) reported much higher GWP results than those that limited the scope to resin or granule production. Including EOL in the LCA provides more comprehensive results for biopolymers, but simultaneously introduces greater amounts of uncertainty and variability. Little life-cycle data is available on the impacts of different manners of disposal, thus it will be critical for future sustainability assessments of biopolymers to include accurate end of life impacts.     

Competing sigmatropic shift rearrangements in excited allyl radicals

The competition between rearrangement of the excited allyl radical via a 1,3 sigmatropic shift versus sequential 1,2 shifts has been observed and characterized using isotopic substitution, laser excitation, and molecular beam techniques. Both rearrangements produce a 1-propenyl radical that subsequently dissociates to methyl plus acetylene. The 1,3 shift and 1,2 shift mechanisms are equally probable for CH(2)CHCH(2), whereas the 1,3 shift is favored by a factor of 1.6 in CH(2)CDCH(2). The translational energy distributions for the methyl and acetylene products of these two mechanisms are substantially different. Both of these allyl dissociation channels are minor pathways compared to hydrogen atom loss.     

Competing fragmentation processes in tandem mass spectra of heparin-like glycosaminoglycans

Heparin-like glycosaminoglycans (HLGAGs) are highly sulfated, linear carbohydrates attached to proteoglycan core proteins and expressed on cell surfaces and in basement membranes. These carbohydrates bind several families of growth factors and growth factor receptors and act as coreceptors for these molecules. Tandem mass spectrometry has the potential to increase our understanding of the biological significance of HLGAG expression by providing a facile means for sequencing these molecules without the need for time-consuming total purification. The challenge for tandem mass spectrometric analysis of HLGAGs is to produce abundant ions derived via glycosidic bond cleavages while minimizing the abundances of ions produced from elimination of the fragile sulfate groups. This work describes the competing fragmentation pathways that result from dissociation of high negative charge state ions generated from HLGAGs. Glycosidic bond cleavage ion formation competes with losses of equivalents of H2SO4, resulting in complex ion patterns. For the most highly sulfated structure examined, an octasulfated tetramer, an unusual loss of charge from the precursor ion was observed, accompanied by low abundance ions originating from subsequent backbone cleavages. These results demonstrate that fragmentation processes competing with glycosidic bond cleavages are more favored for highly sulfated HLGAG ions. In conclusion, reduction of charge-charge repulsions, such as is achieved by pairing the HLGAG ions with metal cations, is necessary in order to minimize the abundances of ions derived via fragmentation processes that compete with glycosidic bond cleavages.     

木醋液的成分分析

采用KarlFisher法测定了木醋液中的水分含量;在样品未经过处理的条件下和经乙醚萃取、浓缩后,分别采用气相色谱–质谱联机技术(GC/MS)分析,测得了其中的有机成分和它们的相对含量。实验结果表明,木醋液中除了主要成分乙酸外,另外还含有含量较少、种类繁多的酮类化合物、酚类化合物、酯类、醛类和醇类等化合物。     

Competing forces in the interaction of polyelectrolytes with charged interfaces

In this review, we discuss the competition of non-DLVO forces in the adsorption of polyelectrolytes onto charged surfaces. We consider two particularly illustrative problems, namely the adsorption of polyelectrolytes onto similarly charged surfaces and the reversal of surface charge by adsorption of polyelectrolytes. Emphasis is made on how simulation results help to understand relevant experimental situations.     

Competing ion decomposition channels in matrix-assisted laser desorption ionization

We gauged the internal energy transfer for two dissociative ion decomposition channels in matrix-assisted laser desorption ionization (MALDI) using the benzyltriphenylphosphonium (BTP) thermometer ion [PhCH 2PPh 3] (+). Common MALDI matrixes [alpha-cyano-4-hydroxycinnamic acid (CHCA), 3,5-dimethoxy-4-hydroxycinnamic acid (sinapinic acid, SA), and 2,5-dihydroxycinnamic acid (DHB)] were studied with nitrogen laser (4 ns pulse length) and mode-locked 3 x omega Nd:YAG laser (22 ps pulse length) excitation. Despite the higher fluence required to initiate fragmentation, BTP ions indicated lower internal energy transfer with the picosecond laser in all three matrixes. These differences can be rationalized in terms of phase explosion induced by the nanosecond laser vs a stress-confinement-driven desorption mechanism for the picosecond laser. For the two ion production channels of the BTP thermometer ion, breaking a single bond can result in the formation of benzyl/tropylium ions, F1, or triphenylphosphine ions, F2. In SA and DHB, as well as in CHCA at low fluence levels, the efficiency of these channels (expressed by the branching ratio I F1/ I F2) is moderately in favor of producing tropylium ions, 1 < I F1/ I F2 < 6. As the laser fluence is increased, for CHCA, there is a dramatic shift in favor of the tropylium ion production, with I F1/ I F2 approximately 30 for the nanosecond and the picosecond laser, respectively. This change is correlated with the sudden increase in the BTP internal energies in CHCA in the same laser fluence range. The large changes observed in internal energy deposition for CHCA with laser fluence can account for its ability to induce fragmentation in peptides more readily than SA and DHB.     

XPS研究聚苯胺的竞争掺杂行为

采用X射线光电子能谱（XPS）方法对不同反应体系下化学合成的聚苯胺（PANI）的结构和掺杂状况进行了研究。发现盐酸（HCl）掺杂的聚苯胺在样品后处理过程中易发生脱掺杂行为;在十二烷基苯磺酸钠（SDBS）和盐酸共存体系下合成聚苯胺时,对阴离子DBS-和Cl-发生竞争掺杂行为。结果表明DBS-与带正电荷聚苯胺链结合,起到了掺杂和诱导聚苯胺可溶性的作用,它的N1s和S2p谱图与单独采用十二烷基苯磺酸（DBSA）掺杂聚苯胺的谱图相似。但SDBS-HCl复合体系比单独采用DBSA体系更为有利。