Thermal degradation kinetics of thermoresponsive poly(N-isopropylacrylamide-co-N,N-dimethylacrylamide) copolymers prepared via RAFT polymerization

Reversible addition-fragmentation chain transfer polymerization at 70 °C in N,N-dimethylformamide was used to prepare poly(N-isopropylacrylamide-co-N,N-dimethylacrylamide) copolymers in various compositions to afford well-defined polymers with pre-determined molecular weight, narrow molecular weight distribution, and precise chain end structure. The copolymer compositions were determined by ¹H NMR spectroscopy. The reactivity ratios of N-isopropylacrylamide (NIPAM) and N,N-dimethylacrylamide (DMA) were calculated as r _NIPAM = 0.838 and r _DMA = 1.105, respectively, by the extended Kelen–Tüdös method at high conversions. The lower critical solution temperature of PNIPAM can be altered by changing the DMA content in the copolymer chain. Differential scanning calorimetry and thermogravimetric analysis at different heating rates were carried out on these copolymers to understand the nature of thermal degradation and to determine its kinetics. Different kinetic models were applied to estimate various parameters like the activation energy, the order, and the frequency factor. These studies are important to understand the solid state polymer degradation of N-alkyl substituted polymers, which show great potential in the preparation of miscible polymer blends due to their ability to interact through hydrogen bonding.     

Molecular design of three-dimensional artificial extracellular matrix: Photosensitive polymers containing cell adhesive peptide

A photodimerizable monomer, methacrylic acid-(7-coumaroxy) ethyl ester, was synthesized and was copolymerized with a hydrophilic monomer (N,N-dimethylacrylamide) to obtain a water-soluble photosensitive polymer. Irradiation of the copolymer film and aqueous solution with a high-pressure mercury lamp resulted in highly hydrated gel. The gel yield was enhanced with the content of the photodimerizable group in the copolymer and the irradiation time. The degree of swelling of the gels decreased concomitantly. Incorporation of the well-known cell adhesive peptidyl ligand Arg-Gly-Asp-Ser(RGDS) into photosensitive copolymers attained a biologically active hydrophilic gel matrix upon UV light irradiation. Irradiation of a buffer solution of the latter copolymer premixed with smooth muscle cells entrapped the cells throughout the gel matrix. This indicates that the designed polymer and the resulting cell-incorporated hydrogel are biomimic to an extracellular matrix and to the media of the vascular wall, respectively. © 1993 John Wiley & Sons, Inc.     

Double hydrophilic diblock copolymers containing a poly(ionic liquid) segment: Controlled synthesis, solution property, and application as carbon precursor

In this contribution, we demonstrate the controlled synthesis of double hydrophilic block copolymers comprising a hydrophilic poly(ionic liquid) (PIL) segment via the RAFT/MADIX process. The non-ionic segment is made up from either poly(N-isopropylacrylamide) (PNIPAAm) or poly(N,N-dimethylacrylamide) (PDMA), due to their favorable controllable solubility in water at room temperature. They were employed as macro-chain transfer agents (macro-CTAs) for the RAFT polymerization of four different 1-vinylimidazolium ionic liquid monomers possessing different alkyl substitutes and anions. The block copolymers of PNIPAAm-b-PIL are dual stimuli-responsive copolymers that can respond to the changes in temperature and ionic strength in aqueous solution. This special property facilitated a facile anion exchange of the PIL segment. In addition, one copolymer could successfully be employed as carbon precursor for the preparation of mesoporous graphitic nanostructures in the presence of metal salts.     

Cryopolymerization of N,N-dimethylacrylamide in moderately frozen formamide

The free-radical polymerization of N,N-dimethylacrylamide initiated by the redox pair ammonium persulfate-N,N,N??,N??-tetramethylethylenediamine in moderately frozen and liquid formamides is studied at temperatures 10?C30°C below or above the temperature of crystallization (2.9°C) of the pure solvent at various monomer concentrations in the initial solution. When polymerization is conducted at temperatures below the temperature of crystallization of formamide, the frozen systems, as is evident from their phase diagrams, include the crystallized main bulk of the solvent and the noncrystallizing monomer concentrated in the unfrozen liquid microphase where the reaction occurs. It is found that, in the case of this cryopolymerization variant, the temperature dependences of the yield of the polymer and its viscosity-average molecular mass show an extremum pattern and the positions of maximum points relative to the temperature scale depend on the initial monomer concentration. It is shown that the molecular masses of cryopolymerization products are much higher and their molecular-mass distribution is wider than that of poly(N,N-dimethylacrylamide) samples synthesized through solution polymerization (above the temperature of crystallization of formamide) at the same concentration of the monomer.     

Versatile cobalt(Salen-NEt2) for aqueous cobalt-mediated radical polymerization

Cobalt-mediated radical polymerization (CMRP) has enabled the polymerization of a wide range of monomers with predictable molecular parameters and well-defined compositions and architectures. However, the synthesis of hydrophilic polymers by CMRP directly in the aqueous phase is still challenging. Herein, a handy cobalt complex was developed to perform CMRP of N-vinylpyrrolidone (NVP), 2-hydroxyethyl acrylate (HEA), and N,N-dimethylacrylamide (DMA) with linearly increased molecular weight, low polydispersity values, and smoothly shifted gel permeation chromatography (GPC) traces. The chain extensions of NVP, HEA, and DMA revealed the well chain-end fidelity for the synthesis of block copolymers. Moreover, the poly(N-vinylpyrrolidone)-block-poly(vinyl acetate) (PVP-b-PVAc) amphiphilic block copolymer colloidal solution was achieved directly in aqueous phase by cobalt-mediated radical polymerization-induced self-assembly (CMR-PISA), forming the nanoparticles consisting of a hydrophilic PVP corona and a hydrophobic PVAc core. This new mediator opens the opportunity for the synthesis of various hydrophilic (co)polymers in an environmentally friendly manner.     

Thermosensitive superabsorbents based on poly(N,N-diethylacrylamide-co-sodium acrylate)

A series of poly(N,N-diethylacrylamide-co-sodium acrylate) with a degree of crosslinking of 1 mol%have been prepared as thermosensitive superabsorbents for water.The critical swelling temperatures or the volume phase transition temperature(VPTT) and the water absorption capacity of the polymers can be modulated by varying the amount of sodium acrylate(0-60 mol%) in the copolymers.The water absorption and swelling properties of the different hydrogels have been studied as function of temperature.The crosslinked copolymers can absorb large amounts of water at ambient temperatures and dehydrate at higher temperatures with relative ease,making the absorbent materials thermally responsive and thus reusable.The water absorption capacity of the copolymers depends on the pH of the media as the acrylate monomer has a higher water absorption in its deprotonated state.Added urea in the media raises and sharpens the VPTT values of the copolymers containing sodium acrylate.     

Synthesis and characterization of pH‐sensitive and thermosensitive double hydrophilic graft copolymers

A series of poly(N‐isopropylacrylamide)‐co‐poly(N^ε‐benzyloxycarbonyl‐L ‐lysine) graft copolymers (PNIPAm‐co‐PZLLys) with different side chains (degree of polymerization, DP = 5～40) and unit ratios (from 30 to 70 mol %) were prepared via free radical polymerization, followed by cleaving benzyloxycarbonyl groups (Z groups) to obtain the double hydrophilic graft copolymer, poly(N‐isopropylacrylamide)‐co‐poly(L ‐lysine) (PNIPAm‐co‐PLLys). The pH‐ and temperature‐response properties of the graft copolymers in aqueous solution were studied. The experimental results indicate L15‐N30 and L15N‐70, that is, the PNIPAm‐co‐PLLys having the poly(L ‐lysine) of DP = 15 as side chains as well as 30 and 70 mol %, respectively, of PNIPAm as backbone, have coil‐to‐helix transitions from pH 6 to pH 12 at room temperature and form uniform nanoscale micelle‐like dispersions in aqueous solution at pH 12. The graft copolymers also could form uniform and nanoscale micelle‐like structures at 50 °C in pH 6 buffer solution due to slightly polymer aggregation. With temperature and pH increased, both the deprotonated PLLys side chains and PNIPAm backbone become hydrophobic, leading to polymer precipitation. These results illustrate that a double tunable hydrophilic graft copolymer had been successfully synthesized via a simple radical polymerization, and could form micelles without serious polymer aggregation at a lower pH and a higher temperature. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Surface modification of microfluidic channels by UV-mediated graft polymerization of non-fouling and ‘smart’ polymers

Microfluidic channels prepared from polydimethylsiloxane (PDMS) have been modified by UV-mediated graft polymerization of temperature-responsive polymers (poly[N-isopropyl acrylamide] or pNIPAAm), temperature- and pH-responsive copolymers (P[NIPAAm-co-acrylic acid (AAc)]), and a non-fouling hydrogel (polyethyleneglycol diacrylate, or PEGDA). This was done by presorbing a photosensitizer (PS) within the PDMS channel surface regions, contacting the different monomer solutions with the PS-containing surface under nitrogen, and irradiating with UV. The pNIPAAm-grafted surface was hydrophilic below its lower critical solution temperature (LCST), resisting non-specific adsorption, while it was hydrophobic above its LCST, now binding pNIPAAm-coated nanoparticles. Combined temperature- and pH-responsive surfaces were also prepared by UV radiation grafting a monomer mixture of pNIPAAm with AAc. The surfaces have been characterized by advancing water contact angle measurements. These smart microfluidic channels should be useful for many applications such as affinity separations and diagnostic assays.     

Effects of the acid chain length and copolymer crosslinking on the acylation of N-hydroxysuccinimide copolymers with carbobenzoxyoligo-ϵ-aminocaproic acids

N-Hydroxysuccinimide-type soluble copolymer with styrene and three similar divinylbenzene (3–4 mole-%) crosslinked copolymers with styrene, N-vinylpyrrolidone, and N,N-dimethylacrylamide were prepared from their precursor copolymers of N-acetoxymaleimide. Acylation of these N-hydroxyl polymers with carbobenzoxyoligo-?-aminocaproic acids was conducted in dimethylformamide at room temperature by using dicyclohexylcarbodiimide as condensing agent. The soluble styrene copolymer was acylated in good conversions (76–89%) in every case (n = 1–3), whereas the acylation of the crosslinked copolymers decreased slightly from n = 1 to n = 2, and dropped suddenly to only small conversions (4.7–7.4%) with n = 3, showing a marked inhibitory effect of crosslinking when the acids became longer. The effect of the microenvironment of the polymer did not appear significant. All the acyl polymers, including the precursor polymers, yielded the corresponding cyclohexylamides when treated with cyclohexylamine.     

Swelling and water transport in temperature-sensitive hydrogels based on 2-methoxyethylacrylate

A series of thermoresponsive hydrogels based on copolymers of 2-methoxyethylacrylate with acrylamide or N,N-dimethylacrylamide were prepared by radiation-induced polymerization in dimethylformamide solution in the presence of a crosslinking agent. The swelling behaviour of the hydrogels was studied by immersing the polymer samples in water at 5°C, 10°C and 37°C. The data were found to satisfactorily fit Fick's law with a constant diffusion coefficient. The results indicate that the swelling ratio increases with increasing the content of the hydrophilic monomers in the hydrogels and at the same time the equilibrium swelling time decreases. The effect of temperature on water transport mechanism was observed.     

Shell-crosslinked nanoparticles through self-assembly of thermoresponsive block copolymers by RAFT polymerization

A reversible addition-fragmentation chain transfer (RAFT) agent, the methyl-2-(n-butyltrithiocarbonyl)propanoate (MBTTCP) has shown to be efficient in controlling the polymerization of N,N-dimethylacrylamide (DMA), N-isopropylacrylamide (NIPAM) and N-acryloyloxysuccinimide (NAS). Two different strategies have been studied to synthesize block copolymers based on one PNIPAN block and the other a random copolymer of DMA and NAS. When a PNIPAM trithiocarbonate-terminated is used as macromolecular chain transfer agent for the polymerization of a mixture of NAS and DMA, well-defined P(NIPAM-b-(NAS-co-DMA)) block copolymers were obtained with a low polydispersity index. These thermoresponsive block copolymers dissolved in aqueous solution at 25 °C and self-assembled into micelles when the temperature was raised above the LCST of the PNIPAM block. The micelle shell containing NAS units was further crosslinked using a primary diamine in order to get shell-crosslinked nanoparticles. Upon cooling below the LCST of PNIPAM this structure may easily reorganize to form nanoparticles with a water filled hydrophilic core.     

New N-vinylamide-based polymers for the preconcetration of nitrophenols from aqueous media

New cross-linked copolymer with molecular imprints of 4-nitrophenol have been synthesized by the radical polymerization of cyclic N-vinyl amides and ethylene glycol dimethacrylate. Sorption characteristics of the obtained polymers depend on the nature of the functional monomer, ratio of components in the prepolymerization mixture, pH of solution, and temperature. It has been established that N-vinylpyrrolidone-based copolymers provide higher selectivity of 4-nitrophenol extraction than N-vinylcaprolactam-based products.     

Controlled polymerization of carbazole‐based vinyl and methacrylate monomers at ambient temperature: A comparative study through ATRP,SET, and SET‐RAFT polymerizations

The polymerization of N‐vinylcarbazole (NVK) and carbazole methacrylate (CMA) was carried out using controlled radical polymerization methods such as atom transfer radical polymerization (ATRP), single electron transfer (SET)‐LRP, and single electron transfer initiation followed by reversible addition fragmentation chain transfer (SET‐RAFT). Well‐controlled polymerization with narrow molecular weight distribution (M_w/M_n) < 1.25 was achieved in the case of NVK by high‐temperature ATRP while ambient temperature SET‐RAFT polymerization was relatively slow and controlled. In the case of CMA, SET‐RAFT is found to be more suitable for the ambient temperature polymerization. The polymerization rate followed first order kinetics with respect to monomer conversion and the molecular weight of the polymer increased linearly with conversion. The controlled nature of the polymerization is further demonstrated by the synthesis of diblock copolymers from PNVK and PCMA macroinitiators using a new flavanone‐based methacrylate (FMA) as the second monomer. All the polymers exhibited fluorescence. The excimer bands in the homopolymers of PNVK and PCMA were very broad, which may be attributed to the carbazole–carbazole overlap interaction. The scanning electron microscopy analysis of the block copolymer reveals interesting morphological features. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Rheological behavior of associating ionic polymers based on diallylammonium salts containing single-, twin-, and triple-tailed hydrophobes

The cycloterpolymerizations of N,N-diallyl-(4-octyloxy)benzyl-, N,N-diallyl-(3,5-dioctyloxy)benzyl-, and N,N-diallyl-(3,4,5-trioctyloxy)benzyl-ammonium chloride (0-8 mol%) with hydrophilic monomer N,N-diallyl-N-carboethoxymethylammonium chloride and sulfur dioxide afforded a series of cationic polyelectrolytes (CPE). The CPEs were treated with HCl and NaOH to produce the corresponding pH-responsive cationic acid salts (CAS) and polybetaines (PB), anionic polyelectrolytes (APE) as well as polymers PB/APE containing various proportions of zwitterionic (PB) and anionic fractions (APE) in the polymer chain. Likewise, the cycloterpolymerizations of these single-, twin-, and triple-tailed hydrophobes (0-12 mol%) with hydrophilic monomer diallyldimethylammonium chloride and sulfur dioxide afforded a series of CPE in excellent yields. The polymers were characterized by different techniques including NMR and IR. The solution properties of the series of CPE were investigated by rheological techniques. The studied water soluble polymers showed different rheological behavior depending on their structure (hydrophobe type and content) as well as salinity and pH. The high shear thinning and the formation of networks at low shear would likely promote the use of such polymers in enhanced oil recovery applications.     

Initiator‐fragment incorporation radical polymerization of divinylbenzene in the presence of glyoxylic oxime ether: Formation of soluble hyperbranched polymer

The copolymerization of divinylbenzene (DVB) and ethylstyrene (EtSt) was carried out at 70 and 80 °C in benzene with dimethyl 2,2‐azobisisobutyrate (MAIB) at high concentrations as initiator in the presence of methyl benzyloxyiminoacetate (MBOIA), a glyoxylic oxime ether, as a retarder. The copolymerization system of DVB (0.25 mol/L), EtSt (0.25 mol/L), MBOIA (0.5 mol/L), and MAIB (0.5 mol/L) gave benzene‐soluble copolymers despite a considerably high concentration of DVB as an excellent crosslinker. The yield and molecular weight of the resulting copolymers increased with time both at 70 and 80 °C and then leveled off because of initiator consumption. The homogeneous polymerization system involved electron spin resonance (ESR), observable nitrogen‐centered polymer radicals (MBOIA·) under the actual polymerization conditions. The MBOIA· concentration increased with time despite a homogeneous polymerization system, suggesting the formation of rigid hyperbranched polymers. A benzene solution of isolated copolymer also showed an ESR signal. The copolymer was soluble in acetone, toluene, chloroform, ethyl acetate, tetrahydrofuran, and N,N‐dimethylformamide but insoluble in n‐hexane, methanol, and dimethyl sulfoxide. MAIB fragments as high as 30–40 mol % were incorporated into the copolymers through initiation and primary radical termination, on the basis of which this polymerization was named the initiator‐fragment incorporation radical polymerization. MBOIA (13–16 mol%) was also incorporated into the copolymers through an opening of the C?N bond. The intrinsic viscosity of the copolymers was very low (0.08 dL/g), and the reduced viscosity was almost independent of the polymer concentration, supporting a hyperbranched structure of them. Gel permeation chromatography and multi‐angle laser light scattering and transmission electron microscopy revealed that the copolymer was formed as a hyperbranched nanoparticle. The thermal behavior of the copolymer was examined by dynamic thermogravimetry and differential scanning calorimetry. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 3038–3047, 2003     

RAFT synthesis of thioether-based,AB diblock copolymer nanocarriers for reactive oxygen species–triggered release

A well-defined AB diblock copolymer of 2-vinyl-4,4-dimethylazlactone (VDA) and N,N-dimethylacrylamide (DMA) was generated by reversible addition-fragmentation chain transfer (RAFT) radical polymerization. The VDA-DMA diblock copolymer was reacted with 2-(methylthio)ethylamine (MTEA) and 3-(methylthio)propylamine (MTPA) to yield two novel thioether functional diblock copolymers whose structure was confirmed using ¹H NMR and FTIR spectroscopy. Both diblock copolymers formed micelles (20–30 nm) in aqueous media as confirmed by dynamic light scattering (DLS) and transmission electron microscopy. The self-assembled micelles were loaded with Nile Red, a model hydrophobic drug to study their ROS-triggered release mechanism. On addition of hydrogen peroxide (H₂O₂), the most common ROS species, the hydrophobic thioether core of these micelles oxidized, and both diblock copolymers became more hydrophilic. This triggered their disassembly and subsequent cargo release as characterized by UV–visible spectroscopy. The Nile Red loaded micelles demonstrated similar in-vitro ROS-mediated release when exposed to endogenous oxidants in a model inflammation environment simulated by the presence of activated macrophages. The responsive nanomaterials developed in this article have promising potential as drug carriers in applications where ROS-triggered delivery of cargo is required such as in inflammatory conditions.     

Phase transition of aqueous solutions of poly(N,N-diethylacrylamide-co-acrylic acid) by differential scanning calorimetric and spectrophotometric methods

 The phase transition of aqueous solutions of poly(N,N-diethylacrylamide-co-acrylic acid) (DEAAm–AA) is studied by differential scanning calorimetry (DSC) and UV–vis spectrophotometry. The copolymer aqueous solutions are shown to have well-defined lower critical solution temperatures (LCSTs). The LCST values obtained from the maximum of the first derivatives of the DSC and optical transition curves agree well. DSC can be used to measure the phase-transition temperature of more dilute polymer solutions. On increasing the AA composition in the copolymers, the LCST values of the copolymer increase, then decrease at higher AA composition. For the aqueous solution of the copolymers, the transition curve obtained by the spectrophotometric method is highly wavelength dependent. The LCST values are found to be concentration-dependent. The changes in the heat of the phase transition of the copolymer solutions measured from DSC are lower than that of the homopolymer PDEAAm solution. This is consistent with the suggestion that the polymer chains of the copolymers collapsed only partially at temperatures above the LCST. The added salt (sodium chloride) decreases the transition temperature of the polymer solution. Received: 14 November 2000 Accepted: 15 January 2001     

The imaging of nano and micro globules of short linear thermo responsive polyacrylamides formed above the lower critical solution temperature

An imaging method has been developed to examine thermo responsive polymer coagulates by optical and electron microscopy. Poly-N-isopropylacrylamide (PNIPAM), poly-N-dimethylacrylamide (PDMAM) and a 1:1 PNIPAM-PDMAM copolymer were encapsulated in a gelatin matrix as coagulates above the lower critical solution temperature (LCST), and subsequently examined by optical and electron microscopy. The linear macromolecules PNIPAM and PDMAM were synthesized by chain transfer polymerization with mercaptopropionic acid (3-MPA) as chain transfer reagent. The resulting polymers have an average molar mass of ∼1800 g/mol and low polydispersity. The LCST of thermo responsive polymers is defined in pure water but can also be stimulated at lower than the phase transition temperature employing electrolytes containing inorganic salts such as (NH₄)₂SO₄. Under such conditions the polymers show the typical thermo responsive phase transfer property in form of a visible clouding point. Gelatin was used to maintain this biphasic state by slowly adding water-softened gelatin sheets at a temperature above the LCST, followed by cooling to 3 °C in order to induce gelation. Examination of the gelatin-coagulate matrices by optical and electronic microscopy showed that PNIPAM and its copolymer (PNIPAM/PDMAM 1:1) are entrapped as globular spheres and clusters of spheres. In comparison pure PDMAM, even if it shows a clouding point, does not form typical LCST coagulates. With PNIPAM and the copolymer, micro globule formation is also possible with slow gelatin formation, without first provoking an LCST. In this particular case, the phase transition, or entropic demixing of the polymers respectively, are induced in this case by water absorption of the gelatin matrix.     

Ternary copolymers of acrylic acid, <Emphasis Type="Italic">N</Emphasis>-isopropylacrylamide,and butyl acrylate: Synthesis and aggregative behavior in dilute solutions

Narrowly dispersed hydrophilic block and random copolymers of acrylic acid and N-isopropylacrylamide of various compositions and molecular masses are synthesized for the first time by controlled radical polymerization via the reversible addition-fragmentation chain-transfer mechanism. The copolymers are used for the synthesis of ternary copolymers with n-butyl acrylate. As shown by dynamic light scattering, the resulting amphiphilic copolymers can form stable dispersions in diluted aqueous solutions. It is found that the effective hydrodynamic radii of dispersion particles may be controlled via variation both in the primary structure of the ternary copolymer, i.e., the amount and sequence of hydrophilic and hydrophobic units, and in the external stimuli, i.e., the temperature and pH of a solution.     

Nonlinear depression of the lower critical solution temperatures in aqueous solutions of thermo-sensitive random copolymers

We develop a theoretical model of cooperative hydration to clarify the molecular origin of the observed nonlinear depression of the lower critical solution temperature (LCST) in the aqueous solutions of thermosensitive random copolymers and find the monomer composition at which LCST shows a minimum. Phase diagrams of poly(N-isopropylacrylamide-co-N,N-diethylacrylamide) copolymer solutions are theoretically derived on the basis of the theory of cooperative hydration by introducing the microscopic structure parameter η which characterizes the distribution of the monomer sequences along the chains. We compared them with the experimental data of LCST of random copolymers with various monomer compositions and also of the diblock copolymers with equimolar monomer composition. The transition temperature shifts to lower than those of homopolymer counterparts when the monomer sequence of the chains has an alternative tendency. On the contrary, for the blocky polymers such as diblock copolymers, the transition temperature remains almost the same as those of the homopolymers. Thus, the nonlinear effect in phase separation appears when the average block length of the copolymers is shorter than the average sequence length of the cooperative hydration. The degree of hydration is calculated as a function of the temperature and polymer concentration for varied distribution of the copolymer compositions. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2013, 51, 1112–1123