Characterization of silicones by direct-deposition GC/FT-IR

Materials used in the manufacture of silicone breast prostheses were analyzed by supercritical fluid chromatography (SFC) and high temperature gas chromatography (GC) coupled with direct deposition FT-IR detection. The chromatographic resolution and deposition quality were found to be unsatisfactory for SFC/FT-IR; however, high temperature GC/FT-IR produced excellent results. The chromatograms and spectra obtained allowed for the identification of poly-dimethyl silicones and mono-, di-, and tri-diphenylsubstituted poly-dimethyl silicones. An automated method of baseline correction was developed that allowed functional group chromatograms due to molecules containing Si-phenyl bonds to be constructed without significant interference from Si-methyl bonds despite the fact that the Si-C stretching mode of Si-phenyl bands overlapped significantly with the strong bands due to Si-CH₃ groups.     

An integrated GC/FT-IR system for the analysis of environmental pollutants

An integrated gas chromatography/Fourier transform infrared spectrometry (GC/FT-IR) system developed for the analysis of environmental pollutants is described. The versatility of the system allows the utilization of many different techniques of sample introduction and manipulation during analysis. The sample can be introduced by direct injection or thermal desorption from an adsorbent cartridge, and can then be separated on one of two capillary columns and detected by FT-IR or an FID. Cold traps and collection cartridges incorporated in the system permit recovery and additional fractionation of samples. Recovered sample and sample fractions can then be re-analyzed by GC/FT-IR or subsequently analyzed by GC/MS or other methods.     

脱蜡剂DF-1的气相色谱-傅里叶变换红外光谱联用分析

脱蜡剂ＤＦ－１是一种含多种有机成分的碳氢化合物，经气相色谱－红外光谱联用分析后，确定了这些组分的组成与含量。     

Gas chromatography/flame ionisation detection mass spectrometry for the detection of endogenous urine metabolites for metabonomic studies and its use as a complementary tool to nuclear magnetic resonance spectroscopy

Metabonomics is a relatively new field of research in which the total pool of metabolites in body fluids or tissues from different patient groups is subjected to comparative analysis. Nuclear magnetic resonance (NMR) spectroscopy is the technology that is currently most widely used for the analysis of these highly complex metabolite mixtures, and hundreds of metabolites can be detected without any upfront separation. We have investigated in this study whether gas chromatography (GC) separation in combination with flame ionisation detection (FID) and mass spectrometry (MS) detection can be used for metabolite profiling from urine. We show that although GC sample preparation is much more involved than for NMR, hundreds of metabolites can reproducibly be detected and analysed by GC. We show that the data quality is sufficiently high--particularly if appropriate baseline correction and time-warping methods are applied--to allow for data comparison by chemometrics methods. A sample set of urines from eleven healthy human volunteers was analysed independently by GC and NMR, and subsequent chemometrics analysis of the two datasets showed some similar features. As judged by NIST database searches of the GC/MS data some of the major metabolites that are detected by NMR are also visible by GC/MS. Since in contrast to NMR every peak in GC corresponds to a single metabolite, the electron ionisation spectra can be used to quickly identify metabolites of interest if their reference spectra are present in a searchable database. In summary, we show that GC is a method that can be used as a complementary tool to NMR for metabolite profiling of urine samples.     

Comprehensive two-dimensional gas chromatography/mass spectrometric analysis of pepper volatiles

The headspace compositions of 13 pepper and peppercorn samples of different species, colloquially also referred to as pepper, were analyzed, and more than 300 compounds were tentatively characterized by means of comprehensive two-dimensional gas chromatography in tandem with flame ionization detection, quadrupole mass spectrometric detection and time-of-flight mass spectrometric detection (GC x GC-FID, GC x GC/qMS and GC x GC/TOFMS, respectively). The analysis of volatile organic compounds (VOCs) was performed after solid-phase microextraction (SPME) using a 75-microm PDMS/DVB fibre. Fingerprint comparison between the three techniques permitted peaks to be assigned in the GC x GC-FID experiment based on the analogous MS analysis, taking into account retention shifts arising from method variations. When using GC x GC/TOFMS, about five times more peaks were identified than in GC x GC/qMS. Retention indices for all peaks were calculated in the bi-dimensional column set comprising of a 5% phenyl polysilphenylene-siloxane primary column and a polyethylene glycol second column. The spectra obtained by both mass detection techniques (qMS and TOFMS) give very similar results when spectral library searching was performed. The majority of the identified compounds eluted as pure components as a result of high-resolution GC x GC separations, which significantly reduces co-elution, and therefore increases the likelihood that pure spectra can be obtained. The differences between TOFMS and qMS (in fast scanning mode) spectra were generally small. Whilst spectral quality and relative ion ratios across a narrow peak (e.g. w(b) approximately 100-150 ms) do vary more for the fast peaks obtained in GC x GC/qMS operation, than with TOFMS, in general adequate spectral matching with the library can be achieved.     

Utilizing two detectors in the measurement of trichloroacetic acid in human urine by reaction headspace gas chromatography

A reaction headspace gas chromatography (HS‐GC) technique was investigated for quantitatively analyzing trichloroacetic acid in human urine. This method is based on the decomposition reaction of trichloroacetic acid under high‐temperature conditions. The carbon dioxide and chloroform formed from the decomposition reaction can be respectively detected by the thermal conductivity detection HS‐GC and flame ionization detection HS‐GC. The reaction can be completed in 60 min at 90°C. This method was used to quantify 25 different human urine samples, which had a range of trichloroacetic acid from 0.52 to 3.47 mg/L. It also utilized two different detectors, the thermal conductivity detector and the flame ionization detector. The present reaction HS‐GC method is accurate, reliable and well suitable for batch detection of trichloroacetic acid in human urine.     

分子印迹磁固相萃取/气相色谱法分析环境水样中5种酰胺类除草剂残留

以丁草胺为假模板分子,丙烯酰胺为功能单体,利用四氧化三铁磁性纳米微球成功制备了具有特异性识别能力的磁性分子印迹聚合物。采用透射电子显微镜、红外光谱和振动样品磁强计对印迹聚合物进行表征,结果显示,分子印迹聚合物成功包裹在四氧化三铁表面。印迹聚合物对5种酰胺类除草剂均有特异性识别作用。以磁性分子印迹聚合物为基础,建立了酰胺类除草剂的气相色谱检测方法。方法学验证表明该方法具有良好的回收率(85.0%~99.5%)和精密度(RSD为2.8%~5.0%,n=5),线性范围为0.1~500μg·L~(-1),检出限为0.02~0.05μg·L~(-1)。该方法能够应用于农田灌溉用水等环境水样的测定。     

Temperature dependence of Kováts indices in gas chromatography revisited

The performance of Fourier transform infrared spectroscopy (FT-IR) detection coupled to high-performance liquid chromatography for the analysis of C₆₀ and C₇₀ fullerenes was investigated. The isocratic separation method involved an octadecylsilane (ODS) column and an acetonitrile–toluene (1:1) mobile phase. The hyphenated system was designed with a split valve to control eluent volume leading to the FT-IR detector; this allowed for additional coupling of the liquid chromatograph to ultraviolet–visible detection. On-line FT-IR spectra of C₆₀ and C₇₀ were matched with standard off-line FT-IR spectra from the literature. In addition, with band chromatograms individual fullerenes can be identified using FT-IR active modes known specifically for each fullerene. Few changes to a pre-existing HPLC–UV method were necessary for the HPLC–FT-IR method, and there was no need for fraction collection to identify the fullerenes C₆₀ and C₇₀.     

Identification of disaccharides by gas chromatography-Fourier transform infrared spectroscopy

The use of GC-Fourier transform (FT) IR of methylsilyl ethers of disaccharides to positively identify disaccharides is reported for the first time. The conditions required to separate these high-molecular-mass compounds by GC, in the quantities required for FT-IR detection are reported. Trimethylsilyl ethers can be used successfully. The use of dimethylsilyl ethers is not recommended as their instability, under the required operating conditions, resulted in fragmentation and rearrangements.     

Identification of solvents of abuse using gas chromatography/Fourier transform infrared spectrometry after headspace sampling

Summary After experimental intoxication of rats, gas chromatography — Fourier transform infrared spectrometry with headspace sampling (HS/GC/FT-IR) was used to identify solvents of abuse in biological material (blood, liver, lungs and brain). Limits of detection were measured for acetone, 2-butanone, ether, toluene and trichlorethylene with standard solutions. All the solvents have been identified in the organs of the intoxicated rats. For blood samples a salting-out effect was obtained with potassium carbonate. HS/GC/FT-IR allowed the identification of metabolites of acetone (isopropanol) and of 2-butanone (2-butanol) in blood and organs.     

Advances in the gas chromatographic determination of persistent organic pollutants in the aquatic environment

Environmental chemists have been challenged for over 30 years to analyse complex mixtures of halogenated organic pollutants like polychlorinated biphenyls (PCBs), polychlorinated alkanes (PCAs), polybrominated diphenyl ethers (PBDEs) and polychlorinated dibenzo-p-dioxins and polychlorinated furans (PCDD/Fs). Gas chromatography (GC) often proved to be the method of choice because of its high resolution. The recent developments in the field of comprehensive two-dimensional GC (GCxGC) show that this technique can provide much more information than conventional (single-column) GC. Large volume injection (e.g. by programmed temperature vaporiser, or on-column injection) can be employed for the injection of tens of microliters of sample extract, in that way substantially improving the detection limits. Electron-capture detection (ECD) is a sensitive detection method but unambiguous identification is not possible and misidentification easily occurs. Mass spectrometric (MS) detection substantially improves the identification and the better the resolution (as with MS/MS, time-of-flight (TOF) MS and high-resolution (HR)MS), the lower the chances of misidentification are. Unfortunately, this comes only with substantially higher investments and maintenance costs. Co-extracted lipids, sulphur and other interferences can disturb the GC separation and detection leading to unreliable results. Extraction, and more so, sample clean-up and fractionation, are crucial steps prior to the GC analysis of these pollutants. Recent developments in sample extraction and clean-up show that selective pressurised liquid extraction (PLE) is an effective and efficient extraction and clean-up technique that enables processing of multiple samples in less than 1h. Quality assurance tools such as interlaboratory studies and reference materials are very well established for PCDD/Fs and PCBs but the improvement of that infrastructure is needed for brominated flame retardants, PCAs and toxaphene.     

High-performance liquid and gas chromatographic methods for the determination of cicloprolol

Two methods, one based on high-performance liquid chromatography (HPLC) and the other on gas chromatography (GC), were developed for the quantification of the partial adrenergic receptor antagonist cicloprolol. In the GC method, samples are cleaned up by back-extraction, then derivatized with heptafluorobutyric anhydride and separated on a capillary cross-linked methylsilicone column. This GC method is time-consuming but, with electron-capture detection, cicloprolol can be quantified at levels down to 1 ng/ml. The HPLC method, using a reversed ODS stationary phase and fluorimetric detection, is less sensitive (5 ng/ml) but, with a single-step extraction, is faster and simpler. The determination of cicloprolol in human blood samples by the two methods gave comparable results. Routine monitoring of cicloprolol can be done easily with the HPLC method, whereas the time-consuming GC method may be reserved for pharmacokinetic studies where late-sampled tubes, with low concentrations, must be analysed.     

Gas chromatography with spectroscopic detectors.

In recent years, capillary gas chromatography (GC) with Fourier Transform Infrared (FT-IR) and/or mass spectral (MS) detection has become a primary analytical tool for qualitative and quantitative analysis of complex mixtures. Because of the wide range of applications, the analytical requirements have motivated a variety of chromatographic and detection developments. This review examines those, illustrating with applications that demonstrate the power of GC and multidimensional GC-MS, GC-FT-IR and GC-FT-IR-MS systems for solving a variety of analytical problems. In addition, the article discusses the integrated performance of such analytical systems with the aid of recent sample introduction and computer data analysis advances.     

Analysis of nitrilotriacetic acid (NTA), ethylenediaminetetraacetic acid (EDTA) and diethylenetriaminepentaacetic acid (DTPA) in water, particularly waste water

Summary Two chromatographic techniques can be considered for the detection of the complexing agents NTA, EDTA and DTPA in water: gas chromatography (GC) and liquid chromatography (HPLC). GC is capable of detecting all three compounds in concentrations of as little as 0.001 mg/l. However, this requires a complex and time-consuming sample preparation (enrichment, derivatization). HPLC represents a possible alternative for detecting EDTA and DTPA. Without enrichment it is possible to reach a detection limit of 0.1 mg/l, i.e., while this method is rather less sensitive, it provides results in a much shorter time. If the sample concentrations are high enough, this method is more suitable for conducting routine monitoring of emissions of EDTA and DTPA in waste water. Simple matrices such as surface water or drinking water can be enriched on a pre-column to reduce the detection limit.Dedicated to Professor Dr. Wilhelm Fresenius on the occasion of his 80th birthday     

Original GC–FID Determination of Non-Chromophoric Impurities in Quetiapine: An Antipsychotic Drug

A rapid and sensitive gas chromatographic method using flame ionization detection (GC–FID) has been developed and validated for five process related non-chromophoric impurities viz, 2-(2-chloroethoxy)ethanol (2-CEE), piperazine, 2-(piperazin-1-yl)ethanol (HEP), 2-[2-(piperazin-1-yl)ethoxy]ethanol (HEEP), 2,2-[piperazine-1,4-diylbis(ethane-2,1-diyloxy)]diethanol (DEEP) observed during the process development of quetiapine hemifumarate, an antipsychotic drug is presented. All five non-chromophoric impurities ranging from 0.05 to 0.1% were detected using DB-5 (30 m × 0.53 mm, 5 μm) column with a good peak separation. The method was fully validated according to the ICH Q2 (R1) guidelines. The investigated validation protocols showed that the method has acceptable specificity, accuracy, linearity, precision, robustness and high sensitivity with detection limits and quantitation limits ranging from 0.001 to 0.01% and 0.004 to 0.03%, respectively. These non-chromophoric impurities generated during the process were identified by GC–MS and are characterized by MS, ¹H NMR and FT-IR spectroscopy.     

Methyl benzoate as a marker for the detection of mold in indoor building materials

A convenient analytical method to quantify volatile organic compounds (VOCs) emitted from various building materials has not been addressed yet. This work presents a new and rapid automated method using SPME combined with GC/MS. Methyl benzoate - as a metabolic biomarker for mold growth-was used to indicate VOCs and to determine and assess mold growth on damp samples. Gypsum board and wall-board paper were used as examples of common indoor building materials. Optimized extraction conditions were carried out manually, using a GC/flame ionization detector. Moldy samples were analyzed using an automated SPME-GC/MS analysis under optimized conditions. The amount of methyl benzoate emitted from the studied samples ranged from 32 to 46 ppb, where the density of the fungal biomass was found to be 8 x 10(4) cells/mL. A relationship between the amount of fungal biomass and the emitted concentration of methyl benzoate was found and assessed based upon cultured mold samples taken from indoor building sites. The analytical method shows promise for the compound methyl benzoate, which can easily be identified at low detection limits (LOD = 3 ppb) and good linearity (>0.988), and its extraction and detection can be accomplished cleanly by current extraction techniques. Results suggest that this method with easy sample preparation can be used for quantitation and, of importance, minimal matrix effects are observed.     

High-speed gas chromatography: the importance of instrumentation optimization and the elimination of extra-column band broadening

This review provides a summary of chromatographic theory as it applies to high-speed gas chromatography. A novel method for determining the optimal linear flow velocity, u (opt), from specific experimental parameters, is discussed. An in-depth theoretical understanding of u (opt) and its relation to experimental parameters is presented, in the absence of extra-column band broadening, as a means of method evaluation and optimization. Recent developments in high-speed GC are discussed, in the context of the theory presented within this review, to ascertain the influence of extra-column band broadening. The theory presented herein can be used as a means of evaluating the various areas of GC instrumentation (injection, separation, detection, etc.) that need further development to further minimize the effects of extra-column band broadening. The theoretical framework provided in this review, can be, and is, readily used to evaluate high-speed GC results presented in the literature, and thus, the general practitioner may more readily select a specific capillary length and/or internal diameter for a given application. For example, it is theoretically shown, and prior work cited, that demonstrates a peak width of approximately 1 ms is readily achievable in GC, when extra-column band broadening is eliminated.     

Enhancing the Limit of Detection for Comprehensive Two‐Dimensional Gas Chromatography (GC×GC) using Bilinear Chemometric Analysis

The chemometric method referred to as the generalized rank annihilation method (GRAM) is used to improve the precision, accuracy, and resolution of comprehensive two‐dimensional gas chromatography (GC×GC) data. Because GC×GC signals follow a bilinear structure, GC×GC signals can be readily extracted from noise by chemometric techniques such as GRAM. This resulting improvement in signal‐to‐noise ratio (S/N) and detectability is referred to as bilinear signal enhancement. Here, GRAM uses bilinear signal enhancement on both resolved and unresolved GC×GC peaks that initially have a low S/N in the original GC×GC data. In this work, the chemometric method of GRAM is compared to two traditional peak integration methods for quantifying GC×GC analyte signals. One integration method uses a threshold to determine the signal of a peak of interest. With this integration method only those data points above the limit of detection and within a selected area are integrated to produce the total analyte signal for calibration and quantification. The other integration method evaluated did not employ a threshold, and simply summed all the data points in a selected region to obtain a total analyte signal. Substantial improvements in quantification precision, accuracy, and limit of detection are obtained by using GRAM, as compared to when either peak integration method is applied. In addition, the GRAM results are found to be more accurate than results obtained by peak integration, because GRAM more effectively corrects for the slight baseline offset remaining after the background subtraction of data. In the case of a 2.7‐ppm propylbenzene synthetic sample the quantification result with GRAM is 2.6 times more precise and 4.2 times more accurate than the integration method without a threshold, and 18 times more accurate than the integration method with a threshold. The limit of detection for propylbenzene was 0.6 ppm (parts per million by mass) using GRAM, without implementing any sample preconcentration prior to injection. GRAM is also demonstrated as a means to resolve overlapped signals, while enhancing the S/N. Four alkyl benzene signals of low S/N which were not resolved by GC×GC are mathematically resolved and quantified.     

Application of fast gas chromatography/mass spectrometry for the rapid screening of synthetic anabolic steroids and other drugs in anti-doping analysis

This paper describes a fast gas chromatographic/mass spectrometric (GC/MS) screening method for the detection, in urine, of 36 xenobiotics (30 synthetic anabolic steroids, four narcotics, one diuretic and one stimulant) excreted free or as glucuro-conjugates in urine and detectable as trimethylsilyl (TMS) derivatives. These drugs (and/or their urinary metabolites) can be simultaneously extracted by a single liquid/liquid separation step, at alkaline pH, after enzymatic hydrolysis with beta-glucuronidase and then assayed as TMS derivatives by GC/MS using electron ionisation (EI) and single ion monitoring (SIM) acquisition mode. The total time needed for the GC run is less than 8 min. Good reproducibility of the retention times (CV% <1) and the relative abundances of the diagnostic fragment ions (CV% <10) was observed for all target analytes. The sensitivity of the method is sufficient to match the requirements of the World Anti-Doping Agency (WADA) for the accredited laboratories, with limits of detection (LODs) that are lower than the corresponding WADA minimum required performance limits (MRPLs) for all target compounds.     

Evaluation of low-pressure gas chromatography linked to ion-trap tandem mass spectrometry for the fast trace analysis of multiclass pesticide residues

A rapid multiresidue method for the analysis of 72 pesticides has been developed using a single injection with low-pressure gas chromatography/tandem mass spectrometry (LP-GC/MS/MS). The LP-GC/MS/MS method used a short capillary column of 10 m x 0.53 mm i.d. x 0.25 microm film thickness coupled with a 0.6 m x 0.10 mm i.d. restriction at the inlet end. Optimal LP-GC conditions were determined which achieved the fastest separation in MS/MS detection mode. Also MS/MS conditions were optimized in order to increase sensitivity and selectivity. The analytical parameters of the LP-GC/MS/MS method were compared with those obtained by GC/MS/MS using a conventional capillary column (30 m x 0.25 mm i.d. x 0.25 microm film thickness). Better precision and sensitivity values were obtained with the LP-GC/MS/MS approach. The limits of detection (LOD) of the compounds ranged from 0.1 to 14.1 microg L(-1) for LP-GC/MS/MS, lower than those obtained for conventional GC/MS/MS that ranged from 0.1 to 17.5 microg L(-1). The peak widths obtained with the short column in LP-GC are similar to those obtained using conventional capillary GC columns, and the peaks can be successfully identified by MS/MS detection with the conventional scan speed of ion-trap instruments. In addition, the analysis time was significantly reduced with LP-GC/MS/MS (32 min) versus GC/MS/MS (72 min), allowing the number of samples analyzed per day in a routine laboratory to be doubled.