层状层电介质空间轴对称问题的状态空间解

从横观各向同性压电介质空间轴对称问题的基本方程出发,建立了压电介质空间轴对称问题的状态变量方程,对状态变量方程进行Hankel变换,得到以状态变量表示的单层压电介质在Hankel变换空间中的解,讨论了3种不同特征根的情况,利用提出的解得到了半无限压电体在垂直集中载荷和点电荷作出下的Boussinesq解。利用传递矩阵方法导出了多层压电介质空间轴对称问题解一般解析式。     

层状横观各向同性饱和土的非轴对称动力响应

通过方位角的Fourier变换,将圆柱坐标系下横观各向同性饱和土的Biot非轴对称波动方 程转化为一组一阶常微分方程组. 然后基于径向Hankel变换,建立问题的状态方程;求解状态方程后,得到传递矩阵. 进而利用传递矩阵,结合饱和层状地基的边界条件、排水条件及层间接触和连续条件,求解 了任意震源力作用下层状横观各向同性饱和地基频域动力响应问题. 时域解可通过频率的Fourier积分得到.     

层状饱和土Biot固结问题状态空间法

针对饱和多孔介质空间非轴对Biot固结问题，引入状态变量，构造了两组相比独立的状态变量方程，利用Fourier级数和Laplace-Hankel变换，将状态变量方程转换为两组一阶常微分方程组，提出了均质饱和多孔介质空间非轴对称Biot固结问题的传递矩阵，得到以状态变量和传递矩阵乘积的形式表示的均质饱和多孔介质空间非轴对称Biot固结问题的解，利用层间完全接触的条件，可得到N层饱和多孔介质空间非轴对称Biot固结问题的一般解析表达式，文中考虑几种不同的边界条件，分析了两个算例，数值结果表明该方法具有较高的计算精度和良好的计算稳定性。     

TORSIONAL VIBRATIONS OF RIGID CIRCULAR PLATE ON TRANSVERSELY ISOTROPIC SATURATED SOIL

An analytical method was presented for the torsional vibrations of a rigid disk resting on transversely isotropic saturated soil. By Hankel transform, the dynamic governing differential equations for transversely isotropic saturated poroelastic medium were solved. Considering the mixed boundary-value conditions, the dual integral equations of torsional vibrations of a rigid circular plate resting on transversely isotropic saturated soil were established. By appropriate transform, the dual integral equations were converted into a Fredholm integral equation of the second kind. Subsequently, the dynamic compliance coefficient, the torsional angular amplitude of the foundation and the contact shear stress were expressed explicitly. Selected examples were presented to analyse the influence of saturated soil's anisotropy on the foundation's vibrations.     

层状压电压磁弹性介质空间问题的数据分析与处理

从横观各向同性层状压电压磁弹性介质空间问题出发，利用状态变量法和0层面的边界条件，得到适用于计算不同状态变量的关系矩阵，以及状态变量表示的多层压电压磁弹性介质在Hankel变换空间中的解。在选择性计算的基础上，对不同的状态变量分别采用各自的方式修正关系矩阵，有效地避免了直接计算所产生的计算结果失真现象。为解决诸如此类的更复杂的问题奠定了理论基础。     

流固耦合介质轴对称动力问题解法的改进

用直接求解常微分方程组解文［１］所得的控制方程，减少了传递矩阵计算工作量，避免了子阵求逆，使问题的求解得到了简化     

Exact Electromagnetothermoelastic Solution for a Transversely Isotropic Piezoelectric Hollow Sphere Subjected to Arbitrary Thermal Shock

This paper presents analytical study for electromagnetothermoelastic transient behavior of a transversely isotropic hollow sphere, placed in a uniform magnetic field, subjected to arbitrary thermal shock. Exact solutions for the transient responses of stresses, perturbation of magnetic field vector, electric displacement and electric potential in the transversely isotropic piezoelectric hollow sphere are obtained by means of the Hankel transform, the Laplace transform and their inverse transforms. An interpolation method is used to solve the Volterra integral equation of the second kind caused by interactions among electric, magnetic, thermal and elastic fields. From the sample numerical calculations, it is seen that the present method is suitable for the transversely isotropic hollow sphere, placed in a uniform magnetic field, subjected to arbitrary thermal shock. Finally, the result can be used as a reference to solve other transient coupling problems of electromagnetothermoelasticity.     

直角坐标下横观各向同性饱和半空间体动力响应问题的解析解

基于双重Fourier变换技术，成功求解了直角坐标系下，横观各向同性弹性饱和多孔介质的三维Biot动力方程，得到了以固体骨架位移分量和孔隙流体压力为基本未知量的积分形式一般解．进而，用一般解给出了饱和介质的总应力分量表达式。在此基础上，研究了在任意分布的表面竖向和水平谐振力作用下，横观各向同性饱和半空间体的动力响应问题。数值结果表明，采用各向同性饱和介质的动力学模型，不能准确描述具有明显各向异性特性的饱和土地基的动力性能。     

The Non-Axisymmetrical Dynamic Response of Transversely Isotropic Saturated Poroelastic Media

ＩｎｔｒｏｄｕｃｔｉｏｎＴｈｅｄｙｎａｍｉｃｒｅｓｐｏｎｓｅｏｆｓａｔｕｒａｔｅｄｐｏｒｏｕｓｍｅｄｉｕｍｉｓｔｈｅｂａｓｉｃｉｓｓｕｅ,ｗｈｉｃｈｉｓａｐｐｌｉｃａｂｌｅｉｎｇｅｏｐｈｙｓｉｃａｌｅｘｐｌｏｒａｔｉｏｎ ,ｓｅｉｓｍｏｌｏｇｉｃａｌｅｎｇｉｎｅｅｒｉｎｇ ,ｏｉｌｅｘｐｌｏｒａｔｉｏｎ ,ｄｉｓｐｏｓａｌｏｆｎｕｃｌｅａｒｗａｓｔｅｓ,ｈｙｄｒａｕｌｉｃｅｎｇｉｎｅｅｒｉｎｇａｎｄｃｉｖｉｌｅｎｇｉｎｅｅｒｉｎｇ .Ｓｉｎｃｅｔｈｅｃｏｎｓｔｉｔｕｔｉｖｅｒｅｌａｔｉｏｎｓａｎｄｗａｖｅ…     

Non-axisymmetrical vibration of elastic circular plate on layered transversely isotropic saturated ground

The non-axisymmetrical vibration of elastic circular plate resting on a layered transversely isotropic saturated ground was studied.First,the 3-d dynamic equations in cylindrical coordinate for transversely isotropic saturated soils were transformed into a group of governing differential equations with 1-order by the technique of Fourier ex- panding with respect to azimuth,and the state equation is established by Hankel integral transform method,furthermore the transfer matrixes within layered media are derived based on the solutions of the state equation.Secondly,by the transfer matrixes,the general solutions of dynamic response for layered transversely isotropic saturated ground excited by an arbitrary harmonic force were established under the boundary conditions, drainage conditions on the surface of.ground as well as the contact conditions.Thirdly, the problem was led to a pair of dual integral equations describing the mixed boundary- value problem which can be reduced to the Fredholm integral equations of the second kind solved by numerical procedure easily.At the end of this paper,a numerical result concerning vertical and radical displacements both the surface of saturated ground and plate is evaluated.     

The interaction between a screw dislocation and a piezoelectric fiber composite with a wedge crack

The interaction problem between a screw dislocation and a piezoelectric fiber composite with a semi-infinite wedge crack is investigated in this paper. The piezoelectric media are assumed to be transversely isotropic with the poling direction along the x ₃ direction. The screw dislocation considered here involves a Burgers vector parallel to the poling direction with a line force and a line charge being applied at the core of the dislocation. Both cases of the screw dislocation located at the matrix and inclusion are observed. The analytical derivation is based on the complex variable and the conformal mapping methods. The exact solutions are obtained to calculate the forces on the dislocation and the crack-tip stress and electric displacement intensity factors. Based on these results, the anti-shielding and shielding effects for different loadings, material combinations, and geometric configurations are discussed in detail.     

Free axisymmetric vibration of transversely isotropic piezoelectric circular plates

Based on three-dimensional elastic theory of piezoelectric materials, the axisymmetric state space formulation of piezoelectric laminated circular plates is derived. Finite Hankel transforms are used and the boundary variables in free terms are replaced, for two kinds of boundary conditions, to obtain ordinary differential equations with constant coefficients. Regarding the axisymmetric free vibration problem, two exact solutions for two different boundary conditions are found. Discarding piezoelectric effect, the exact solutions for transversely isotropic circular laminates are also obtained through the same procedure. Numerical examples are given and compared with those of Finite Element Method (FEM) .     

On the boundary conditions for transversely isotropic piezoelectric plates

By invoking the theorem of work reciprocity for piezoelectric media, necessary conditions, which the prescribed edge data of the plate must fulfill in order that it should generate a decaying state within the plate, are established through generalizing the method proposed by Gregory and Wan. These decaying state conditions for the case of axisymmetric deformation of a transversely isotropic piezoelectric circular plate when stress and electric displacement conditions are imposed on the plate edge are derived explicitly, which are then used for the formulation of boundary conditions for the plate theory solution (or the interior solution). Also an analytical solution of the axisymmetric decaying state of transversely isotropic piezoelectric circular plates is derived. Furthermore, the corresponding necessary conditions for the axisymmetric deformation of elastic circular plates are indeed reproduced directly.     

Solutions for transversely isotropic piezoelectric infinite body,semi-infinite body and bimaterial infinite body subjected to uniform ring loading and charge

Based on the fundamental solutions for transversely isotropic piezoelectric materials, the fundamental solutions of axisymmetric problems are derived by integration and explicit expressions for three possible cases of different characteristic roots and multiple roots are all presented. In the case of s₁ ≠ s₂ ≠ s₃ ≠ s₁, based on the Greens functions for semi-infinite piezoelectric body and bimaterial infinite piezoelectric body, the Greens functions for axisymmetric problems of semi-infinite body and bimaterial infinite body are obtained. Taking PZT-4 as an example, numerical computations are conducted by use of the fundamental solutions to axisymmetric problems. Comparison of the calculated results with those of FEM shows good agreement between them.     

3-D DYNAMIC RESPONSE OF TRANSVERSELY ISOTROPIC SATURATED SOILS

Introduction Thedynamicanalysisofsaturatedporoelasticmediaisofbroadmeaninginmanyaspectssuchasseismology,earthquakeengineering,soilmechanicsandgeophysics,etc.Thetransverselyisotropicsaturatedsoilsissolid fluidcoupledtwophasemediainwhichthe soilskeletondisp…     

功能梯度压电圆板自由振动问题的三维精确分析

本文对周边为广义刚性滑动和广义简支两种边界条件下的功能梯度压电材料圆板自由振动问题进行分析。根据轴对称横观各向同性压电材料基本方程,并利用有限Hankel变换得到了功能梯度压电材料圆板的状态空间方程。假设材料的机械和电学性质均沿板厚方向按统一的指数函数形式梯度分布,从而获得了周边为广义刚性滑动和广义弹性简支两种边界条件下功能梯度压电圆板自由振动问题的三维精确频率方程,该方程是一个关于自由振动频率的超越方程,通过求解该超越方程可得到在不同板厚以及不同的材料性质梯度变化情况下的圆板自由振动频率值,结果表明在相同的材料性质梯度变化情况下频率均随着板厚增加而增大,而在相同的板厚情况下频率则随材料性质梯度变化指数的增大而减小的结论。     

横观各向同性饱和层状地基的三维稳态动力响应

首先引入状态向量,将直角坐标系下横观各向同性饱和土的Biot波动方程转化为一组状态方程,然后基于双重Fourier变换,求解了状态方程,得到传递矩阵.进而利用传递矩阵,并结合饱和地基的边界条件、排水条件及层间接触和连续条件,求解了横观各向同性饱和层状地基的稳态动力响应问题.     

Random wave propagation in a viscoelastic layered half space

An extremely efficient and accurate solution method is presented for the propagation of stationary random waves in a viscoelastic, transversely isotropic and stratified half space. The efficiency and accuracy are obtained by using the pseudo excitation method (PEM) with the precise integration method (PIM). The solid is multi-layered and located above a semi-infinite space. The excitation sources form a random field which is stationary in the time domain. PEM is used to transform the random wave equation into deterministic equations. In the frequency-wavenumber domain, these equations are ordinary differential equations which can be solved precisely by using PIM. The power spectral densities (PSDs) and the variances of the ground responses can then be computed. The paper presents the full theory and gives results for instructive examples. The comparison between the analytical solutions and the numerical results confirms that the algorithm presented in this paper has exceptionally high precision. In addition, the numerical results presented show that: surface waves are very important for the wave propagation problem discussed; the ground displacement PSDs and variances are significant over bigger regions in the spatial domain when surface waves exist; and as the depth of the source increases the ground displacement PSDs decrease and the regions over which they have significant effect become progressively more restricted to low frequencies while becoming more widely distributed in the spatial domain.     

压电板壳自由振动的三维精确分析

本文简要评述了压电材料板壳结构的研究现状,着重介绍了近年来我们在压电板壳三维分析方面所做的工作：（1）四边简支横观各向同性压电矩形板的状态空间分析方法：（2）横观各向同性压电圆板和环板的状态空间分析方法;（3）横观各向同性压电圆柱壳和球面各向同性压电球壳耦合振动的精确分析。这些工作都直接从压电弹性力学三维基本方程出发,不引进任何变形假设,因此可作为二维简化理论和数值计算方法的校核标准。文末对今后压电材料板壳的研究方向也作了展望。     

Interaction between annular crack and rigid disc inclusion in a transversely isotropic solid

An analytical approach has been presented to analyze the asymmetric and axisymmetric interactions between an annular crack and a rigid disc inclusion embedded in a transversely isotropic full-space. With the aid of a method of potential functions, Hankel and Abel transforms, the solution of the problems is reduced to a system of Fredholm integral equations, which are solved by using a numerical method. In each case, the stiffness of the disc inclusion and the stress intensity factor at the tips of the annular crack for different degrees of material anisotropy and different ratios of the inner and outer radius of the crack are illustrated graphically. Several limiting cases such as penny-shaped crack and external crack along with some exact solutions are presented to demonstrate the efficiency of the method.