Electron transport dynamics in a room-temperature Au nanoparticle molten salt

A room-temperature Au38 nanoparticle polyether melt has been prepared by exchanging poly(ethylene glycol) (PEG) thiolate ligands, HS-C6-PEG163, into the organic protecting monolayer of Au38(PhC2)24 nanoparticles. Spectral and electrochemical properties verify that the Au38 core size is preserved during the exchange. Adding LiClO4 electrolyte, free PEG plasticizer, and/or partitioned CO2 leads to an ionically conductive nanoparticle melt, on which voltammetric, chronoamperometric, and impedance measurements have been made, respectively, of the rates of electron and ion transport in the melt. Electron transport occurs by electron self-exchange reactions, or electron hopping, between diffusively relatively immobile Au38(0) and Au38(1+) nanoparticles. The rates of physical diffusion of electrolyte ions (diffusion coefficients DCION) are obtained from ionic conductivities. The measured rates of electron and of electrolyte ion transport are very similar, as are their thermal activation energy barriers, observations that are consistent with a recently introduced ion atmosphere relaxation model describing control of electron transfer in semisolid ion and electron-conductive media. The model has been previously demonstrated using a variety of metal complex polyether melts; the present results extend it to electron transfers between Au nanoparticles. In ion atmosphere relaxation control, measured rates and energy barriers for electron transfer are not intrinsic values but are instead characteristic of competition between back-electron transfer caused by a Coulombic disequilibrium resulting from an electron transfer and relaxation of counterions around donor-acceptor reaction partners so as to reachieve local electroneutrality.     

Ion-transfer voltammetry at a polarized room-temperature molten salt/water interface.

Tetraoctylammonium cation forms a room-temperature molten salt (RTMS) with 2,4,6-trinitrophenolate anion. The RTMS is immiscible with water (W) and forms a stable RTMS/W interface. It has been shown that the RTMS/W interface can be electrochemically polarized. A well-defined voltammetric wave due to the transfer of thiocyanate ion across the RTMS/W interface was observed within the potential window. This is the first example of a polarized RTMS/W interface.     

In situ spectroscopic ellipsometry of pH-responsive polymer brushes on gold substrates

The dynamic and reversible switching behaviour of polyelectrolyte brushes of poly(2-(dimethylamino)ethyl methacrylate) (PDMAEMA) toward changes of the pH value was studied by in situ VIS-spectroscopic ellipsometry (SE). For this, PDMAEMA brushes with three different molecular weights were synthesized via the “grafting from” method using surface initiated atom transfer radical polymerization. In detail, the applicability of different SE data modelling to describe the optical properties of the different brush layers in the swollen and collapsed state was investigated. Especially for the PDMAEMA brushes with a high molecular weight, an improved optical modelling of the experimental data could be achieved and revealed an exponential distribution of the PDMAEMA fraction in the brush layer.

In situ spectroscopic characterization of rectifying molecular monolayers self-assembled on gold.

We report visible, Raman, and infrared spectra of self-assembled monolayers (SAMs) formed by the donor-(pi-bridge)-acceptor chromophore, Z-beta-[N-(omega-acetylthioalkyl)-4-quinolinium]-alpha-cyano-4-styryldicyanomethanide (CH3CO-S-CnH2n-Q3CNQ where n=8, 10), on gold-coated substrates. The data are compared with the spectra collected for the same compound in solution and in the solid state, and with those obtained for a Langmuir-Blodgett (LB) monolayer of C16H33-Q3CNQ deposited on gold. Spectral analysis confirms that in solution, in the solid state and in the LB film the chromophore has a zwitterionic (D+-pi-A-) ground state. At variance with this well-known result, our data show that in SAMs deposited on gold the chromophore has a more neutral, quinoid ground state. We relate this difference to the different packing of the molecules in the two different films: in SAMs in fact the chromophores stand almost vertical with respect to the substrate, whereas in LB films they make an angle of about 45 degrees. The Q3CNQ molecule is a well-known molecular rectifier, and for SAMs we were able to check the direction of electron flow at forward bias on the same samples that have been characterized spectroscopically, shedding light on the rectification mechanism.     

In situ high-throughput study of drug polymorphism under controlled temperature and humidity using FT-IR spectroscopic imaging

Fourier transform infrared (FT-IR) spectroscopic imaging in combination with a controlled humidity cell was applied to simultaneously monitor crystallisation of several binary mixtures of two drugs under identical environment. The effect of relative humidity was studied on samples of binary mixtures of nifedipine and nitrendipine with different molar ratios as well as on amorphous nitrendipine. All samples were arranged in array format on the surface of BaF₂ window for simultaneous imaging using an infrared focal plane array detector. The effect of sample thickness on the analysis of imaging results was addressed using novel approach to create images. The thickness-independent images have been obtained by plotting the distribution of the wavenumber corresponding to the peak maximum of the ν(NH) vibrational mode which is sensitive to the formation of the various crystalline polymorphs. The FT-IR spectroscopic imaging approach described in this work can be utilised in further high-throughput studies of many samples under controlled environment.     

In situ studies of the adsorption kinetics of 4-nitrobenzenediazonium salt on gold

Self-assembled organic layers are an important tool for modifying surfaces in a range of applications in materials science. Covalent modification of metal surfaces with aryldiazonium cations has attracted much attention primarily because this reaction offers a route for spontaneously grafting a variety of aromatic moieties from solution with high yield. We have investigated the kinetics of this process by performing real-time, in situ nanogravimetric measurements. The spontaneous grafting of 4-nitrobenzene diazonium salts onto gold electrodes was studied via quartz crystal microbalance (QCM) from aqueous solutions of the salt at varying concentrations. The concentration dependence of the grafting rate within the first 10 min is best modeled by assuming a reversible adsorption process with free energy comparable to that reported for arylthiols self-assembled on gold. Multilayer formation was observed after extended grafting times and was found to be favored by increasing bulk concentrations of the diazonium salt. Modified gold surfaces were characterized ex situ with cyclic voltammetry, infrared reflection absorbance spectroscopy, and X-ray photoemission spectroscopy. Based on the experimentally determined free energy of adsorption and on the observed grafting rates, we discuss a proposed mechanism for aryldiazonium chemisorption.     

Synthesis and spectroscopic observation of dendrimer-encapsulated gold nanoclusters

We report on the observation of the excitation/emission spectrum of a dendrimer-encapsulated gold nanocluster; the synthesis of Au-PAMAM was based on reduction of HAuCl4 x 3 H2O co-dissolved in methanol together with fourth-generation OH-terminated PAMAM.     

In situ characterisation of the aqueous gold colloid interface using CO as a surface probe: IR spectroscopic studies

Fourier transform infrared (FTIR) spectra are presented of CO gas-treated protected gold colloids prepared from hydrazinium hydrate reduction of an Au(III) precursor which reproducibly feature a weak, shortlived peak at ca. 2169 cm(-1). When the gold colloid was treated with 99% isotopically enriched (13)CO gas, the IR peak shifted to a frequency of 2114 cm(-1) which indicated that it represented a simple gold monocarbonyl species. The value of 2169 cm(-1) for the CO stretching frequency suggests the peak represents CO physisorbed on oxidised gold atoms on the colloid surface. The peak is not observed when the concentration of the colloidally dispersed gold is reduced either by use of lower starting salt concentrations or by aggregation. It is also not observed when solutions of the protecting agent or reducing agent or the dispersion medium (water) or even the starting Au(III) salts are CO-treated individually. This confirms that the spectral feature is uniquely associated with colloidally dispersed gold. In general, the work has shown that the surfaces of Au colloids in situ have partially oxidised Au character which is of interest in systems where supported nanoparticulate gold derived from colloid preparations are considered for low temperature oxidation catalysts for CO.     

In situ surface-enhanced Raman scattering and X-ray photoelectron spectroscopic investigation of coenzyme Q10 on silver electrode

In this study, coenzyme Q(10) (CoQ(10)) has been investigated by in situ near-infrared Fourier transform surface-enhanced Raman scattering (NIR-FT-SERS) spectroelectrochemistry and angle-resolved X-ray photoelectron spectroscopy (AR-XPS) on silver surface. The surface adsorption behavior of the coenzyme Q(10) radical intermediate could be monitored by potential-dependent SERS technique. At the applied potential lower than -0.30 V vs. SCE, the radical intermediate CoQ(10)H˙ stands perpendicularly on the silver surface with both oxygen atoms of the aromatic ring and isoprenoid side chains. When the applied potential is more positive than -0.30 V vs. SCE or at open circuit potential, the quinone ring (benzene ring) of reduced form of coenzyme Q(10) (CoQ(10)H(2)) adopts a face-on surface configuration on the surface. The responsible mechanism for the potential-dependent SERS spectra is presented. Moreover, the adsorption conformation of CoQ(10) has been further confirmed by AR-XPS at the silver surface.     

In situ construction of a stable composite solid electrolyte interphase for dendrite-free Zn batteries

Building a stable solid electrolyte interphase(SEI) has been regarded to be highly effective for mitigating the dendrite growth and parasitic side reactions of Zn anodes. Herein, a robust inorganic composite SEI layer is in situ constructed by introducing an organic cysteine additive to achieve long lifetime Zn metal batteries. The chemisorbed cysteine derivatives are electrochemically reduced to trigger a local alkaline environment for generating a gradient layered zinc hydroxide based multicom...     

In situ AFM studies of SEI formation at a Sn electrode

Early stages of the solid electrolyte interphase (SEI) formation at a tin foil electrode in an ethylene carbonate (EC) based electrolyte were investigated by in situ AFM and cyclic voltammetry (CV) at potentials >0.7 V, i.e., above the potential of Sn–Li alloying. We detected and observed initial steps of the surface film formation at ～2.8 V vs. Li/Li⁺ followed by gradual film morphology changes at potentials 0.7 < U < 2.5 V. The SEI layer undergoes continuous reformation during the following CV cycles between 0.7 and 2.5 V. The surface film on Sn does not effectively prevent the electrolyte reduction and a large fraction of the reaction products dissolve in the electrolyte. The unstable SEI layer on Sn in EC-based electrolytes may compromise the use of tin-based anodes in Li-ion battery systems unless the interfacial chemistry of the electrode and/or electrolyte is modified.     

In situ FT-IR spectroscopic study on the conformational changes of isotactic polypropylene in the presence of supercritical CO2

The conformational changes of isotactic polypropylene (iPP) under supercritical CO₂ condition with different pressure and temperature have been carefully studied by in situ Fourier-transform infrared spectroscopy (FT-IR). Analysis of the corresponding spectra shows that the conformational ordering by supercritical CO₂ results in the intensity enhancement of the regularity bands of iPP. Due to the high CO₂ concentration and strong intermolecular interaction, iPP can reach an equilibrium state in a short time at high CO₂ pressure. The equilibrium time increases with soaking temperature. After supercritical CO₂ treatment, two mechanisms, the formation of short helix from amorphous phase and the extension of short helix into long one, happen simultaneously. The latter mechanism undergoes quickly at the beginning of induced conformational changes and then slows down, resulting in the slight increase of crystallinity. At the same time, the conformational ordering in amorphous phase happens continuously until a thermodynamic equilibrium. In summary, in the presence of supercritical CO₂, the conformational ordering of iPP chains occurs exclusively in the amorphous region, with no impact on the crystal part.     

In situ GISAXS investigation of gold sputtering onto a polymer template

Microphase-separation structures in mixed diblock-triblock copolymer thin films are used for the incorporation of gold atoms inside the polymer matrix via sputtering of gold. Polystyrene (PS) spheres are arranged in a liquidlike type with a well defined nearest neighbor distance inside a polyisoprene matrix acting as a template for directing the gold atoms. Sputtering conditions are selected with a very low sputtering rate to avoid clustering in the atmosphere so that gold reaches the polymer surface in its atomic state. Due to the mobility of the gold atoms and the selective interaction with the PS parts of the microphase separation structure, gold is accumulated inside the polymer film in the PS spheres, as probed in situ with grazing incidence small-angle X-ray scattering (GISAXS). Nominally 4.3 A of gold is deposited, which by diffusion is spread out vertically over a thickness of 280 nm. UV-vis spectroscopy reveals a small blue shift for the gold sputtered polymer film. Atomic force microscopy proves the absence of gold clusters on the film surface. For low sputtering rate, GISAXS proves good sensitivity for gold migration inside the polymer film and opens new possibilities for studying polymer-metal interaction.     

In situ polymerization and reduction to fabricate gold nanoparticle‐incorporated polyaniline as supercapacitor electrode materials

Nanocomposites of gold nanoparticles and polyaniline are synthesized by using HAuCl₄ and ammonium peroxydisulfate as the co‐oxidant involving in situ polymerization of aniline and in situ reduction of HAuCl₄. Through these in situ methods, the synthesized Au nanoparticles of ca. 20 nm embedded tightly and dispersed uniformly in polyaniline backbone. With the Au content in composite increasing from 4.20 to 24.72 wt.%, the specific capacitance of the materials first increased from 334 to 392 F g⁻¹ and then decreased to 298 F g⁻¹. Based on the real content of PANI in composite material, the highest specific capacitance is calculated to be 485 F g⁻¹ at the Au amount of 19.15 wt.%, which remains 55.6% after 5000 cycles at the current density of 2 A g⁻¹. Finally, the asymmetric supercapacitor of AuNP/PANI||AC and the symmetric supercapacitor of AuNP/PANI||AuNP/PANI are assembled. The asymmetric supercapacitor device shows a better electrochemical performance, which delivers the maximum energy density of 7.71 Wh kg⁻¹ with power density of 125 W kg⁻¹ and maximum power density of 2500 W kg⁻¹ with the energy density of 5.35 Wh kg⁻¹.     

In situ observation of place exchange reactions of gold nanoparticles. Correlation of monolayer structure and stability

Place exchange reactions were studied using dye displacement: subtle changes in ligand structure greatly affected both the rate of displacement and the stability of the monolayer.     

Diffuse reflectance FT-IR spectroscopic study of interactions of alpha-Al2O3/molten alkali nitrate coexisting systems

The diffuse reflectance spectra of alpha-Al(2)O(3)/molten MNO(3) (M=K(+), Li(+)) coexisting systems have been measured for the investigation of the physicochemical properties of molten nitrate at the interface of aluminum oxide. In the region of overtone and combination modes from 3000 to 1700 cm(-1), the absorption band nu(3)+nu(4) decreases with increasing specific surface area of alpha-Al(2)O(3) powder for the potassium mixtures. Gaussian resolution of nu(3)+nu(4) also exhibits changes in band positions of components with the variation in the alumina specific surface area and the nitrate melt content. The second-order derivative of the spectra in the region from 1700 to 950 cm(-1) shows a set of peaks at 1645, 1554-1516, and 1452 cm(-1) characteristic of a coordinated nitrate ion. The peak at 1337 cm(-1) suggests a possible formation of nitrite species. The maxima of nu(3)+nu(4), nu(1)+nu(2), and nu(1)+nu(4) shift toward lower frequencies with increasing temperature above the nitrate melting point. This information shows that the intramolecular bonds of NO(3)(-) are affected. These perturbations are attributed to the effect of the solid phase interacting with the liquid phase. The interaction between solid and liquid phases affects the geometry of the ionic species and, therefore, influences the electrical properties of nitrate ions.     

In situ monitoring of an isocyanate reaction by fiber-optic FT-IR/ATR-spectroscopy

This communication describes the application of a fiber-optic coupled FT-IR/ATR-probe to study the AlCl₃ catalyzed reaction of phenyl isocyanate and phenol to diphenyl urethane in chloroform solution at variable temperatures and to derive the activation energy from the corresponding concentration profiles.     

熔盐电解制备CaB6晶体粉末及电极过程分析

研究采用CaCl2-NaCl混合熔盐电解制备CaB6晶体粉末的合成工艺,确定了电解反应的温度、电解电压、电解时间,对电流效率做了初步估算．同时,对电解生成的终产物的相组成、晶粒尺寸与形貌进行了X射线衍射、扫描电镜及能谱分析．实验结果表明,混合熔盐体系制备CaB6粉末的基本工艺条件是：氩气保护,电解槽电压2．8V,温度800℃下电解18h,所合成的CaB6粉末粒径范围为1～10μm,晶粒为规则的长方体．采用循环伏安法对电解阴极过程进行了定性分析．     

In vivo skin leptin modulation after 14 MeV neutron irradiation: a molecular and FT-IR spectroscopic study

This paper discusses gene expression changes in the skin of mice treated by monoenergetic 14 MeV neutron irradiation and the possibility of monitoring the resultant lipid depletion (cross-validated by functional genomic analysis) as a marker of radiation exposure by high-resolution FT-IR (Fourier transform infrared) imaging spectroscopy. The irradiation was performed at the ENEA Frascati Neutron Generator (FNG), which is specifically dedicated to biological samples. FNG is a linear electrostatic accelerator that produces up to 1.0 × 10(11) 14-MeV neutrons per second via the D-T nuclear reaction. The functional genomic approach was applied to four animals for each experimental condition (unirradiated, 0.2 Gy irradiation, or 1 Gy irradiation) 6 hours or 24 hours after exposure. Coregulation of a subclass of keratin and keratin-associated protein genes that are physically clustered in the mouse genome and functionally related to skin and hair follicle proliferation and differentiation was observed. Most of these genes are transiently upregulated at 6 h after the delivery of the lower dose delivered, and drastically downregulated at 24 h after the delivery of the dose of 1 Gy. In contrast, the gene coding for the leptin protein was consistently upregulated upon irradiation with both doses. Leptin is a key protein that regulates lipid accumulation in tissues, and its absence provokes obesity. The tissue analysis was performed by monitoring the accumulation and the distribution of skin lipids using FT-IR imaging spectroscopy. The overall picture indicates the differential modulation of key genes during epidermis homeostasis that leads to the activation of a self-renewal process at low doses of irradiation.