Self-assembly of small gold nanoparticles through interligand interaction

Stable and monodisperse Au nanoparticles smaller than 2 nm are easily prepared by the reduction of HAuCl(4) x 4H(2)O in DMF/H(2)O in the presence of a series of bidentate ligands, 2,6-bis(1'-(n-thioalkyl)benzimidazol-2-yl)pyridine (TC(n)BIP, n = 3, 6, 8, 10, 12). The TC(n)BIP ligands afford stronger coordination ability than alkanethiols due to their bidentate nature. These small nanoparticles form hexagonal close-packed (hcp) two-dimensional (2D) superlattices with tunable interparticle spacings (from 1.2 to 2.5 nm), produced by changing the length of the ligand at both the hydrophobic amorphous carbon and the air-water interface. Long-range-ordered hcp 2D superlattices were fabricated through the cleavage and construction of interligand pi-pi interactions formed via an annealing process at the air-water interface.     

Planar array of 1D gold nanoparticles on ridge-and-valley structured carbon

For fabrication of a planar array of 1D chains of gold nanoparticles prepared by a chemical process, the faceted (110) planes of sodium chloride crystals were used as templates to produce nanoscale ridge-and-valley structured carbon layers by a vacuum process. When these carbon layers loaded on copper grids were dipped in toluene solution of 3.4 nm gold nanoparticles followed by natural dry, a planar array of 1D chains of gold nanoparticles were formed on carbon layers, where the nanoparticles were immobilized predominantly in valleys and partly on ridges of carbon layers.     

【撤稿】Au纳米颗粒二维超晶格结构的稳定性

We synthesized 5.5 nm Au nanocrystals coated by dodecanethiol (C₁₂SH₂₆) by reverse micelle method. The Au nanocrystals are multiply twinned particles (MTP), which are mainly characterized by decahedral and icosahedral structures. The 2D hexagonal network self-organizationa of Au nanocrystals are realized on both amorphous carbon (AC) and highly oriented pyrolitic graphite (HOPG) surfaces. The stability of 2D superlattices of Au nanocrystals in vacuum has been systematically surveyed, and it is found that large single triangular nanocrystals have been formed after 75 days due to the coalescence among the neighboring nanoparticles and the rearrangement of the atomics. When the Au nanocrystals in 2D organizations are annealed in air (573 K, 15 min), higher ordered 2D self-assemblies are stable, whereas worm-like coalesced nanoparticles form in those less ordered organizations. This demonstrates that the thermal stability of 2D self-assemblies is determined by the level of nanocrystals ordering.     

Raman scattering of 4-aminobenzenethiol sandwiched between Ag nanoparticle and macroscopically smooth Au substrate: effects of size of Ag nanoparticles and the excitation wavelength

A nanogap formed by a metal nanoparticle and a flat metal substrate is one kind of "hot site" for surface-enhanced Raman scattering (SERS). Accordingly, although no Raman signal is observable when 4-aminobenzenethiol (4-ABT), for instance, is self-assembled on a flat Au substrate, a distinct spectrum is obtained when Ag or Au nanoparticles are adsorbed on the pendent amine groups of 4-ABT. This is definitely due to the electromagnetic coupling between the localized surface plasmon of Ag or Au nanoparticle with the surface plasmon polariton of the planar Au substrate, allowing an intense electric field to be induced in the gap even by visible light. To appreciate the Raman scattering enhancement and also to seek the optimal condition for SERS at the nanogap, we have thoroughly examined the size effect of Ag nanoparticles, along with the excitation wavelength dependence, by assembling 4-ABT between planar Au and a variable-size Ag nanoparticle (from 20- to 80-nm in diameter). Regarding the size dependence, a higher Raman signal was observed when larger Ag nanoparticles were attached onto 4-ABT, irrespective of the excitation wavelength. Regarding the excitation wavelength, the highest Raman signal was measured at 568 nm excitation, slightly larger than that at 632.8 nm excitation. The Raman signal measured at 514.5 and 488 nm excitation was an order of magnitude weaker than that at 568 nm excitation, in agreement with the finite-difference time domain simulation. It is noteworthy that placing an Au nanoparticle on 4-ABT, instead of an Ag nanoparticle, the enhancement at the 568 nm excitation was several tens of times weaker than that at the 632.8 nm excitation, suggesting the importance of the localized surface plasmon resonance of the Ag nanoparticles for an effective coupling with the surface plasmon polariton of the planar Au substrate to induce a very intense electric field at the nanogap.     

Formation of low-symmetric 2D superlattices of gold nanoparticles through surface modification by acid-base interaction

In the present work, a novel method was developed for the fabrication of 2D superlattices with different symmetries. Same-surface amino-functionalized Au nanoparticles as building blocks were self-assembled to form different 2D superlattices using surface modification with organic acids. The 2D superlattices of quasi-honeycomb and square structures were obtained by neutralizing amino-functionalized Au nanoparticles with 1,3,5-tribenzenecarboxylic acid and acetic acid, respectively. These results strongly suggest that the different types of 2D or 3D superlattices can be constructed by simple addition of proper acid to nanoparticles functionalized with amino groups. This method will allow us to obtain various desired metal superlattices without fully synthesizing the ligands.     

Influence of Capping Ligands on the Self—organization of Gold Nanoparticles into Superlattices from CTAB Reverse Micelles

Gold nanoparticles with size 3-10nm (diameter) were prepared by the reduction of HAuCl4 in a CTAB/octane 1-butanol/H2O reverse micelle system using NaBH4 as the reducing agent.The as-formed gold nanoparticle colloid was characterized by UV/vis absorption spectrum and transmission electron microscopy(TEM).Various capping ligands,such as alkylthiols with different chain length and shape,trioctylphosphine(TOP),and pyridine are used to passivate the gold nanoparticles for the purpose of self-organization into superstructures.It is shown that the ligands have a great influence on the selforganization of gold nanoparticles into superlattices,and dodecanethiol C12H25SH is confirmed to be the best ligand for the self-organization.Self-organization of C12H25SH-capped gold nanoparticles into 1D,2D and 3D supperlattices has been observed on the carbon-coated copper grid by TEM without using any selective precipitation process.     

Reproducible patterning of single au nanoparticles on silicon substrates by scanning probe oxidation and self-assembly

This paper describes a rational approach for reproducibly patterning single Au nanoparticles, 15-20-nm diameter, on silicon wafer substrates. The approach uses scanning probe oxidation (SPO) to pattern silicon oxide nanodomain arrays on silicon substrates modified with octadecyltrimethoxysilane (OTS). It was usually found using aminopropyltrimethoxysilane (APS) that Au nanoparticles only assembled at the domain boundaries probably because of asymmetrically distributed hydroxyl groups. To generate uniformly distributed hydroxyl groups on oxide domains, we employed a two-step treatment to etch and oxidize the substrate. With this treatment, oxide domains consistently attached Au nanoparticles to maximum capacity. Single Au nanoparticles were readily patterned by fabricating oxide nanodomains with a diameter below 30 nm. We also investigated the deposition of APS on OTS monolayers, which resulted in the assembly of Au nanoparticles outside of the oxide domains, and proposed two alternative methods to inhibit it.     

Synthesis of gold nanoparticles stabilized with poly(N-isopropylacrylamide)-co-poly(4-vinyl pyridine) colloid and their application in responsive catalysis

The copolymer of poly(N-isopropylacrylamide)-co-poly(4-vinylpyridine) was synthesized by free radical copolymerization of 4-vinylpyridine and N-isopropylacrylamide. The copolymer synthesized with the feed monomer ratio of 4-vinylpyridine/N-isopropylacrylamide equal to 1/3 was associated to form thermoresponsive colloid in neutral water at room temperature, the average size and the cloud-point temperature of which were 40 nm and 32 °C, respectively. The thermoresponsive colloid was used as scaffold to load 2-nm Au nanoparticles to form the responsive catalyst of colloid-stabilizing gold nanoparticles. The catalysis in the model reduction of 4-nitrophenol with NaBH₄ suggested that the catalytic reduction could be modulated due to the thermoresponsive phase-transition of the colloid-stabilizing gold nanoparticles. That was, the catalytic reduction firstly accelerated with the increase in temperature below the cloud-point temperature and then decelerated with the increase in temperature above the cloud-point temperature of the thermoresponsive colloid-stabilizing Au nanoparticles.     

Solvent effect on the synthesis of monodisperse amine-capped Au nanoparticles

A remarkable solvent effect in a single-phase synthesis of monodisperse amine-capped Au nanoparticles is demonstrated.Oleylamine-capped Au nanoparticles were prepared via the reduction of HAuCU by an amine-borane complex in the presence of oleylamine in an organic solvent.When linear or planar hydrocarbon(e.g.,n-hexane,n-octane,1-octadecylene,benzene,and toluene) was used as the solvent, high-quality monodisperse Au nanoparticles with tunable sizes were obtained.However,Au nanoparticles with poor size dispersity were obtained when tetralin,chloroform or cyclohexane was used as the solvent.The revealed solvent effect allows the controlled synthesis of monodisperse Au nanoparticles with tunable size of 3-10 nm.     

DNA-templated preparation of gold nanoparticles

DNA-mediated gold nanoparticles were prepared by chemical reduction of DNA-Au(III) complex. The DNA-Au(III) was first formed by reacting DNA with HAuCl? at a pH of 5.6. The complex in solution was reacted with hydrazine reducing Au(III) to Au. The reduced Au formed nanodimensional aggregates. The particle distributions were obtained by scanning electron microscopy (SEM) and transmission electron microscopy (TEM). This method resulted in a rather uniform dispersion of Au nanoparticles of near-spherical shape and 45~80 nm in diameter. Gold nanoparticles were embedded and stabilized by DNA.     

Tunable plasmonic response from alkanethiolate-stabilized gold nanoparticle superlattices: evidence of near-field coupling

We report on the self-assembly of large-area, highly ordered 2D superlattices of alkanethiolate-stabilized gold nanoparticles ( approximately 10.5 nm in core diameter) onto quartz substrates with varying lattice constants, which can be controlled by the alkyl chain lengths, ranging from C12 (1-dodecanethiolate), C14 (1-tetradecanethiolate), C16 (1-hexadecanethiolate), to C18 (1-octadecanethiolate). These 2D nanoparticle superlattices exhibit strong collective surface plasmon resonance that is tunable via the near-field coupling of adjacent nanoparticles. The approach presented here provides a unique and viable means of building artificial "plasmonic crystals" with precisely designed optical properties, which can be useful for the emerging fields of plasmonics, such as subwavelength integrated optics.     

An XPS and STM study of the size effect in NO adsorption on gold nanoparticles

The effect of the gold particle size, temperature of the model gold catalyst, and NO pressure on the composition of the adsorption layer was studied by in situ XPS and STM methods. Adsorption of nitric oxide was carried out on gold nanoparticles with a mean size of 2?C7 nm prepared on the thin film surface of alumina. In high-vacuum conditions (P _NO ?? 10^?5 Pa), only atomically adsorbed nitrogen is formed on the surface of gold nanoparticles. At about 1 Pa pressure of NO and in the temperature range from 325 to 475 K, atomically adsorbed nitrogen coexists with the N₂O adsorption complex. The surface concentration of the adsorbed species changes with a change in both the mean gold particle size and adsorption temperature. The saturation coverage of the surface with the nitrogen-containing complexes is observed for the sample with a mean size of gold particles of 4 nm. The surface of these samples is mainly covered with atomically adsorbed nitrogen, the saturation coverage of adsorbed nitrogen of about ??0.6 monolayer is attained at T = 473 K. The change in the composition of the adsorption layer with temperature of the catalysts agrees with the literature data on the corresponding temperature dependence of the selectivity of N₂ formation observed in the catalytic reduction of NO with carbon monoxide on the Au/Al₂O₃ catalyst. The dependences of the composition of the adsorption layer on the mean size of Au nanoparticles (size effect) and temperature of the catalyst are explained by the sensitivity of NO adsorption to specific features of the gold surface.     

Thermal behavior of carbon nanotubes decorated with gold nanoparticles

Three different forms of carbon, i.e., multi-walled carbon nanotubes (CNTs), single-walled CNTs, and soot, were decorated with gold nanoparticles by a new method. In this method C₁₀H₈ ⁻ ions transfer electrons to the CNTs or soot. These electrons on the carbon surface can then reduce Au³⁺ species to form supported Au nanoparticles with a narrow particle size distribution. Thermogravimetric/differential thermal analyses (TG/DTA), XRD, Raman, and TEM show that naphthalene molecules remain trapped inside the Au nanoparticles and can only be removed by treatment at ca. 300 °C. Remarkable effect of the Au nanoparticles on the oxidation of carbon by O₂ is also observed by TG/DTA, i.e., on-set oxidation temperature and activation energy (E _a). It is shown that as the Au particle size decreases from 25 to 2 nm a linear decrease of the oxidation temperature is observed. Au particles larger than 25 nm do not produce any significant effect on carbon oxidation. These results are discussed in terms of spillover catalytic effect where Au nanoparticles activate O₂ molecules to produce active oxygen species which oxidize the different carbon supports.     

Infra red quantum dot photolithography

CdS quantum dots were fabricated photolithographically on the surface and in the bulk of silica hydrogels, as well as on the surface of planar substrates. Silica hydrogels were prepared with a standard base-catalyzed route, and the solvent was exchanged with a cold aqueous solution of Cd(NO₃)₂, NH₄OH, thiourea, and a capping agent, e.g., 2-mercaptoethanol. The samples were then exposed to a focused infrared beam produced by a continuous-wave Nd:YAG laser. The precursors reacted upon heating, and CdS nanoparticles formed in the illuminated regions. Use of capping agents allowed to control the mean particle size, while focusing of the beam inside hydrogel monoliths generated nanoparticles in their bulk, but not at the surface. Planar substrates were patterned by illuminating a precursor solution spin-coated on the substrates. The average size of the CdS nanoparticles could be varied between about 1.5 and 4.5 nm by varying the type and the concentration of the capping agents.     

金纳米颗粒的水相法合成及荧光性能

在水溶液中,以PAMAM树形分子为模板,乙醇为还原剂,制备了树形分子包裹的金纳米颗粒,其水溶性好,可以稳定放置1年以上;通过控制Au3+与PAMAM树形分子的摩尔比,可以得到粒径可控的金纳米颗粒,其粒径范围为1～4nm,分别在385和402nm处出现强的共振瑞利光散射峰和荧光峰.室温下,荧光量子产率达到10%以上,比其它文献报道的金纳米颗粒的荧光量子产率高2个数量级以上,这一特性使其在潜指纹识别、光催化等方面具有很大的应用潜力.     

Ag/Au Alloy LSPR Engineering by Co‐deposition of RF‐Sputtering and RF‐PECVD

Silver‐Gold alloy/diamond like carbon (Ag‐Au/DLC) nanocomposite films were prepared by co‐deposition of RF‐sputtering and RF‐PECVD on glass substrates by using acetylene gas and silver‐gold target. The deposition process was carried out at room temperature in one minute with the variable parameters of initial pressures and RF powers. X‐ray diffraction analysis demonstrated the formation of Ag/Au alloy nanoparticles with a face‐centered cubic (FCC) structure. Localized surface plasmon and optical properties of Ag‐Au alloy nanoparticles were studied by UV‐visible spectrophotometry which showed that increasing RF power and initial pressure cause a redshift in all samples. Moreover, the effect of RF power and initial pressure on the size and shape of nanoparticles were studied by 2D Atomic force microscopy images. Energy dispersive X‐ray spectroscopy revealed the formation of Ag‐Au/DLC nanoparticles and the percentages of C, Ag, Au and O in all samples. The applied method for Ag/Au alloy preparation is the one step and low‐cost method which makes the samples ready for sensing application.     

Size- and support-dependent electronic and catalytic properties of Au0/Au3+ nanoparticles synthesized from block copolymer micelles

Supported Au nanoclusters synthesized from diblock copolymer micelles can be reliably prepared with well-controlled sizes and dispersions. For particles with diameters between approximately 1 and 6 nm, the particle size and the support were found to strongly influence the oxygen reactivity, the formation and stabilization of a metal-oxide, and the catalytic activity for electrooxidation of carbon monoxide. The smallest particles studied (1.5 nm) were the most active for electrooxidation of CO and had the largest fraction of oxygen associated with gold at the surface as measured by the Au(3+)/Au(0) X-ray photoemission intensities. Conducting and semiconducting substrates, ITO-coated glass and TiO(2), respectively, were associated with greater stabilization of Au(3+) oxide as compared to insulating, SiO(2), substrates.     

Biocrystallization of silver and gold ions by inactive cell filtrate of Rhizopus stolonifer

Microbes and their cell filtrates are known to synthesize metal nanoparticles. But maintenance of aseptic conditions and irregularly shaped and sized nanoparticles are major drawbacks of the system. In this study cell filtrate from inactive biomass of Rhizopus stolonifer was used for the first time to produce near uniformly sized and shaped Ag and Au nanoparticles at room temperature. The size of Ag and Au nanoparticles were found in the range of 25–30 nm and 1–5 nm, respectively. UV–vis spectrum, TEM and XRD measurements confirmed the formation of Ag and Au nanoparticles.     

Amphiphilic gold nanoparticles with V-shaped arms

Here we describe a very efficient method to produce well-defined amphiphilic gold nanoparticles (Au NPs) with an equal number of hydrophobic and hydrophilic arms which are distributed along the surface of a 2-nm gold core in an alternating fashion. The strategy involves direct coupling of V-shaped block copolymer amphiphile 2 with a carboxylic group at its junction point to mercaptophenol-terminated Au NPs. The reaction proceeds under mild esterification conditions and yields the product with a molecular weight of 40 kDa, high grafting density (2.9 chains/nm2), and extremely low polydispersity (1.07). The big advantage of this approach is the opportunity to avoid the use of expensive and often inaccessible polymeric thiols. The method described here is applicable to any carboxyl-terminated molecules and can be used for the preparation of complex, yet well-defined, macromolecular hybrid structures such as 1 (Au(PB-PEG)n). The new product, which was characterized by a combination of SEC, NMR, UV-vis, DLS, and TEM, represents a unique example of gold nanoparticles soluble in any conventional solvent.     

Bi6Fe1.9Co0.1Ti3O18纳米片负载Au尺寸对其可见光光催化性能的影响

我们通过一种简单的化学方法制备了具有可见光催化性能的Bi₆Fe_1.9Co_0.1Ti₃O₁₈/Au（BFCTO/Au）纳米复合材料。结果表明,通过负载不同颗粒大小的Au纳米颗粒（~23 nm、~36 nm、~55 nm和~80 nm）,BFCTO的可见光光催化性能明显增强,其中负载粒径为~23 nm的Au纳米颗粒的BFCTO/Au-1样品的可见光光催化效率最高。