Raman spectroscopic study of dye adsorption on TiO2 electrodes of dye-sensitized solar cells

The state of dye adsorption on TiO₂ electrodes in dye-sensitized solar-cell (DSSC) systems is important for its power-conversion efficiency (PCE). We propose a non-destructive and quantitative method to evaluate the amount of adsorbed dye on TiO₂ electrodes by using micro-Raman spectroscopy. The Raman peak intensity ratio of adsorbed dye to TiO₂, I_d/I_t, is defined as a dye adsorption parameter. Based on a comparison between I_d/I_t and the amount of dye evaluated from UV–vis absorption, the quantitativity and reproducibility of our method are verified.We investigated the change of I_d/I_t spatial distribution of TiO₂ electrodes immersed in a dye solution for different time scales. The statistical analysis of I_d/I_t distribution suggests that dyes adsorbed on TiO₂ electrodes with chemical coordination increase at first, and after their saturation, dye aggregations are formed over the chemisorption layer. We also describe the effect of the I_d/I_t distribution on PCE. From a comparison of PCE and I_d/I_t distribution obtained from various immersion processes, it was considered that the PCE of DSSCs can be optimized by minimizing the I_d/I_t dispersion.     

Electron transport in coumarin-dye-sensitized nanocrystalline TiO2 electrodes

We investigated electron transport kinetics in terms of electron diffusion coefficient (D) and electron lifetime (tau) in coumarin-dye-sensitized nanocrystalline TiO2 electrodes by intensity-modulated photocurrent spectroscopy (IMPS) and intensity-modulated photovoltage spectroscopy (IMVS). We found that the values of tau for coumarin-dye-sensitized TiO2 electrodes were much shorter than that for an electrode coated with a Ru complex (N719 dye), suggesting that the back-electron-transfer process corresponding to recombination between conduction-band electrons in the TiO2 and I3- ions in the electrolyte occurs more easily in coumarin-dye-sensitized solar cells. In addition, the values of tau depended on the kind of coumarin dye, each of which has a different number of thiophene moieties, suggesting that the molecular structure of the adsorbed dyes also affects the kinetics of electron transport in the TiO2 electrodes.     

染料在纳米TiO2薄膜表面吸附性能的研究

采用溶胶－凝胶法制备纳米TiO2薄膜，并通过吸附染料形成染料／TiO2复合薄膜。分析了染料与TiO2薄膜的相互关系，利用紫外可见、比表面等技术研究染料在纳米TiO2薄膜表面的吸附性能，并计算出TiO2薄膜对染料的最大吸附率。研究表明，染料溶液浓度、温度以及TiO2薄膜浸泡时间对染料吸附量有着显著的影响，染料的吸附性能直接影响着太阳能电池的光电转换效率。     

Multistep electron transfer processes on dye co-sensitized nanocrystalline TiO2 films

We report a method for achieving multilayer co-sensitization of nanocrystalline TiO2 films. The method is based upon an aluminum isopropoxide treatment of the monosensitized film prior to deposition of a second sensitizer. Appropriate selection of sensitizer dyes allows vectorial, multistep, electron transfer processes, resulting in a suppression of interfacial charge recombination and a significantly improved photovoltaic device performance relative to single-layer co-sensitization devices.     

Activation energy of electron transport in dye-sensitized TiO2 solar cells

Various characteristics of dye-sensitized nanostructured TiO2 solar cells, such as electron transport and electron lifetime, were studied in detail using monochromatic illumination conditions. The electron transport was found to be a thermally activated process with activation energies in the range of 0.10-0.15 eV for light intensities that varied 2 orders of magnitude. Electron lifetimes were determined using a new method and found to be significantly larger (>1 s) than previously determined. An average potential was determined for electrons in the nanostructured TiO2 under illumination in short-circuit conditions. This potential is about 0.2 V lower than the open-circuit potential at the same light intensity. The electron transport time varies exponentially with the internal potential at short-circuit conditions, indicating that the gradient in the electrochemical potential is the driving force for electron transport in the nanostructured TiO2 film. The applicability of the conventionally used trapping/detrapping model is critically analyzed. Although experimental results can be fitted using a trapping/detrapping model with an exponential distribution of traps, the distribution parameters differ significantly between different types of experiment. Furthermore, the experimental activation energies for electron transport are smaller than those expected in a trapping/detrapping model.     

Investigation on the dynamics of electron transport and recombination in TiO2 nanotube/nanoparticle composite electrodes for dye-sensitized solar cells

In this work, we report on fabrication and characterization of dye-sensitized solar cells based on TiO(2) nanotube/nanoparticle (NT/NP) composite electrodes. TiO(2) nanotubes were prepared by anodization of Ti foil in an organic electrolyte. The nanotubes were chemically separated from the foil, ground and added to a TiO(2) nanoparticle paste, from which composite NT/NP electrodes were fabricated. In the composite TiO(2) films the nanotubes existed in bundles with a length of a few micrometres. By optimizing the amount of NT in the paste, dye-sensitized solar cells with an efficiency of 5.6% were obtained, a 10% improvement in comparison to solar cells with pure NP electrodes. By increasing the fraction of NT in the electrode the current density increased by 20% (from 11.1 to 13.3 mA cm(-2)), but the open circuit voltage decreased from 0.78 to 0.73 V. Electron transport, lifetime and extraction studies were performed to investigate this behavior. A higher fraction of NT in the paste led to more and deeper traps in the resulting composite electrodes. Nevertheless, faster electron transport under short-circuit conditions was found with increased NT content, but the electron lifetime was not improved. The electron diffusion length calculated for short-circuit conditions was increased 3-fold in composite electrodes with an optimized NT fraction. The charge collection efficiency was more than 90% over a wide range of light intensities, leading to improved solar cell performance.     

Realistic cluster modeling of electron transport and trapping in solvated TiO2 nanoparticles

We have developed a cluster model of a TiO(2) nanoparticle in the dye-sensitized solar cell and used first-principles quantum chemistry, coupled with a continuum solvation model, to compute structures and energetics of key electronic and structural intermediates and transition states. Our results suggest the existence of shallow surface trapping states induced by small cations and continuum solvent effect as well as the possibility of the existence of a surface band which is 0.3-0.5 eV below the conduction band edge. The results are in uniformly good agreement with experiment and establish the plausibility of an ambipolar model of electron diffusion in which small cations, such as Li(+), diffuse alongside the current carrying electrons in the device, stabilizing shallowing trapping states, facilitating diffusion from one of these states to another, in a fashion that is essential to the functioning of the cell.     

Improved efficiency of TiO2 nanotubes in dye sensitized solar cells by decoration with TiO2 nanoparticles

In the present work we investigate the effect of TiCl₄ treatments on the photoconversion efficiency of TiO₂ arrays used in dye sensitized solar cell. The results clearly show that by an appropriate treatment the decoration of the TiO₂ nanotube arrays with TiO₂ nanocrystallites of a typical size of 3 nm can be achieved. These particles can be converted to mixture of anatase and rutile phase by annealing in air. This decoration of the TiO₂ nanotubes leads to a significantly higher specific dye loading and, for certain annealing treatments, to a doubling of the solar cell efficiency (in our case from 1.9% to 3.8% of AM 1.5 conditions) can be achieved.     

Photoelectrochemical behavior of Nb-doped TiO2 electrodes

The photoelectrochemical behavior of degenerate Nb-doped TiO2 (Ti(1-x)Nb(x)O2: x = 0, 0.01, 0.03, 0.06, 0.1) electrodes prepared by pulsed laser deposition on LaAlO3 (LAO) and SrTiO3 (STO) was examined, revealing that an increase in Nb concentration causes a significant decay of titania photoactivity. One reason for such behavior may be a Burstein-Moss effect, which leads to a blue shift of the spectral limit of photoactivity. Another reason typical for metal-doped photocatalysts is the increase of the efficiency of charge carrier recombination.     

Spatial electron distribution and its origin in the nanoporous TiO2 network of a dye solar cell

Dye solar cells have been investigated by charge carrier extraction under short and open circuit conditions and an illumination intensity equivalent to 1 sun (AM 1.5). Under short circuit conditions, a surprisingly high amount of charge carriers stored in the nanoporous TiO2 network has been observed. A theoretical model was developed to describe the charge transport in the nanoporous TiO2 network of a dye solar cell, and the spatial distribution of the electron concentration was calculated. These results were compared with the experimental data of charge carriers stored in the TiO2 network under short and open circuit conditions. We were able to conclude that under short circuit conditions, the electrochemical potential of the electrons in the region far from the electrode is up to 550-570 meV higher than that of the electrons at the front electrode. This internal voltage is the driving force across the nanoporous TiO2 film under short circuit conditions.     

纳米TiO_2薄膜电极光电催化降解染料RhB的研究

利用光电协同作用可增强TiO2光催化氧化的量子效率[1-3].外加偏压[4-6]是电助光催化过程的一个重要特性,通过对TiO2薄膜电极施加偏压可降低光生电子和空穴的复合速率,不仅可以加速有机污染物的降解,而且还能改变某些底物的降解途径[7].     

卟啉衍生物敏化纳米TiO2多孔膜电极的光电性质研究

采用中位-四[邻-(3-磺酸基丙氨基)苯基]卟啉(TArP1)和中位-四[对-(3-磺酸基丙氨基)苯基]卟啉(TArP2)分别对纳米TiO2多孔膜电极进行敏化。对两种敏化电极进行了UV-V is光谱测试,结果表明,TiO2与TArP2的作用比与TArP1的作用强。在相同浸泡条件下,TiO2电极吸附TArP2的量大于吸附TArP1的量。将两种敏化电极分别组装成光电化学电池,从光电化学电池的I-V曲线计算TArP2敏化的光电化学电池的总光电转换效率(η)为0.15%,而TArP1敏化的光电化学电池的η为0.09%。     

Photoinduced electron transfer from the excited J-aggregate state of a thiacarbocyanine dye to TiO2 colloids

The photophysical properties of the J-aggregate of 3,3'-di(3-sulfopropyl)-4,5,4',5'-dibenzo-9-phenyl-thiacarbocyanine triethyl-ammonium salt in the absence and presence of TiO(2) colloids have been studied using UV-visible absorption spectroscopy, steady-state and time-resolved fluorescence spectroscopy, and ESR spectroscopy. The fluorescence emission of the J-aggregate decreases with increasing concentration of TiO(2) colloids. The average fluorescence lifetime of the J-aggregate in the presence of TiO(2) colloids is shorter than that in the absence of TiO(2) colloids. A strong photoinduced ESR signal has been observed during illumination by light with lambda=633 nm in the presence of TiO(2) and the ESR signal can be attributed to the J-aggregate radical cation. From the above results, it is concluded that photoinduced electron transfer from the excited singlet state of the J-aggregate to the conduction band of TiO(2) takes place and the electron transfer rate is about 1.5 x 10(8) s(-1).     

Photosensitization of TiO2 nanoparticulate thin film electrodes by CdS nanoparticles

Surface photovoltage spectra (SPS) measurements of TiO₂ show that a large surface state density is present on the TiO₂ nanoparticles and these surface states can be efficiently decreased by sensitization using CdS nanoparticles as well as by suitable heat treatment. The photoelectrochemical behavior of the bare TiO₂ thin film indicates that the mechanism of photoelectron transport is controlled by the trapping/detrapping properties of surface states within the thin films. The slow photocurrent response upon the illumination can be explained by the trap saturation effect. For a TiO₂ nanoparticulate thin film sensitized using CdS nanoparticles, the slow photocurrent response disappears and the steady-state photocurrent increases drastically, which suggests that photosensitization can decrease the effect of surface states on photocurrent response. Electronic Publication     

Photoelectrochemical processes on TiO2 electrodes sensitized by lead selenide nanoparticles

The effect of spectral sensitization of photoelectrochemical processes on the surfaces of mesoporous TiO₂ modified by electrochemically deposited PbSe nanoparticles has been observed.     

Lithium adsorption on TiO2: studies with electron spectroscopies (MIES and UPS)

The adsorption of lithium atoms on rutile TiO₂(110) single crystals was studied with metastable‐induced electron spectroscopy (MIES) and ultraviolet photoelectron spectroscopy (UPS(HeI)) between 130 K and room temperature. Some auxiliary measurements on W(110) required for data interpretation are also reported. At 130 K ionic adsorption at titania prevails up to 0.3 monolayer equivalents (MLE) as judged from the weak Li(2s) emission in MIES for these exposures. The reduction of the Ti⁴⁺ cation is manifested by the growth of an occupied bandgap state in UPS: the alkali s‐electron is transferred to a near‐surface cation, thereby reducing it to Ti³⁺ 3d. The transfer of the s‐electron is responsible for the observed work function decrease up to ～0.5 MLE coverage. From the analysis of the UPS Ti³⁺ 3d signal, as well as from the Li(2s) emission, it is concluded that the degree of ionicity of the adsorbed Li decreases from 100% at 0.3 MLE to 40% at 0.7 MLE. Above 0.5 MLE the MIES spectra are dominated by an Li(2s)‐induced peak indicating the presence of Li with an at least partially filled 2s orbital. At temperatures above 160 K this peak is almost absent. Excluding Li desorption at these temperatures, we suggest that Li moves into or below the rutile TiO₂(110) surface above 160 K. Lithium insertion into the surface and intercalation are discussed. Copyright © 2004 John Wiley & Sons, Ltd.     

Fabrication of ruthenium-doped TiO2 electrodes by one-step anodization for electrolysis applications

Anodic TiO₂ films with a doping of Ru ions on the surface were coincidently prepared by facile one-step anodization for application of the electrode in electrolysis. We found that the amount of Ru ions on the surface of the oxide could be determined based on the applied potential in KRuO₄ electrolyte, which provided negative RuO₄^– ions through dissociation. Overpotentials for the evolution of both O₂ and Cl₂ were greatly reduced when the coincidently-Ru-doped TiO₂ was employed. The Ru-doped electrode prepared at 60 V showed the highest electrocatalytic activity due to the largest amount of Ru incorporation in the oxide.     

Diffusion properties of dye molecules in nanoporous TiO2 networks

The adsorption of ruthenium-dye molecules out of ethanol solution onto TiO2 particles of nanoporous TiO2 films was used to study the molecules' diffusion through these layers by means of optical absorption spectrometry. Dependent on pore size, porosity, and particle size, effective diffusion constants as low as D(eff) = 4 x 10(-9) cm2/s were deduced from the uptake curves by applying a simple model for combined diffusion and adsorption. These diffusion constants for diffusion through the nanoporous network are up to 3 orders of magnitude lower than in bulk ethanol and are discussed with respect to the properties of the nanoporous material.     

Enhancement of solar light photocatalytic activity of TiO2-CeO2 composite by Er3+:Y3Al5O12 in organic dye degradation

The Er³⁺:Y₃Al₅O₁₂, as an upconversion luminescence agent which is able to transform the visible part of the solar light to ultraviolet light, was prepared by nitrate-citrate sol-gel method. A novel solar light photocatalyst, Er³⁺:Y₃Al₅O₁₂/TiO₂-CeO₂ composite was synthesized using ultrasonic treatment. The X-ray diffraction (XRD) and scanning election microscopy (SEM) were used to characterize the structural morphology of the Er³⁺:Y₃Al₅O₁₂/TiO₂-CeO₂ composite. In order to evaluate the solar light photocatalytic activity of Er³⁺:Y₃Al₅O₁₂/TiO₂-CeO₂ composite, the Azo Fuchsine dye was used as a model organic pollutant. The progress of the degradation reaction was monitored by UV-Vis spectroscopy and ion chromatography. The key influences on the solar light photocatalytic activity of Er³⁺:Y₃Al₅O₁₂/TiO₂-CeO₂ were studied, such as Ti/Ce molar ratio, heat-treatment temperature and heat-treatment time. Otherwise, the effects of initial dye concentration, Er³⁺:Y₃Al₅O₁₂/TiO₂-CeO₂ amount, solar light irradiation time and the nature of the dye on the solar light photocatalytic degradation process were investigated. It was found that the solar light photocatalytic activity of Er³⁺:Y₃Al₅O₁₂/TiO₂-CeO₂ composite was superior to Er³⁺:Y₃Al₅O₁₂/TiO₂ and Er³⁺:Y₃Al₅O₁₂/CeO₂ powder in the similar conditions.     

TiO(2) porous electrodes with hierarchical branched inner channels for charge transport in viscous electrolytes.

Titanium dioxide (TiO(2)) photoelectrodes with micro/nano hierarchical branched inner channels have been prepared by an electrohydrodynamic (EHD) technique and assembled to form dye-sensitized solar cells (DSSCs). Excellent penetration of ionic-liquid electrolytes and enhanced light harvesting in the longer wavelength region are realized within the composite-structure electrode, thus a better fill factor (ff) of 75.3 % and higher conversion efficiency (eta) of 7.1 % are obtained for viscous ionic-liquid electrolytes compared to pure nanostructured films. Hierarchical branched channels in the photoanodes can efficiently improve the transport properties of redox-active species in viscous electrolytes, which is demonstrated by electrical impedance spectroscopy (EIS). The incident monochromatic photon-to-electron conversion efficiency (IPCE) shows that enhanced light scattering in the composite film is of benefit for light harvesting and thus for solar energy conversion efficiency.