Measurement and correlation of (vapor + liquid) equilibria for the {2-propoxyethanol (C3E1) + n-hexane} and the {2-propoxyethanol (C3E1) + n-heptane} systems

2-Propoxyethanol (C₃E₁) is one of nonionic surfactants which are a particularly interesting class of substances due to both inter-molecular and intra-molecular association. Binary (vapor + liquid) equilibrium data were measured for {2-propoxyethanol (C₃E₁) + n-hexane} and {2-propoxyethanol (C₃E₁) + n-heptane} systems at temperatures ranging from (303.15 to 323.15) K. A static apparatus was used in this study. The experimental data were correlated well with a lattice fluid equation of state that combines the multi-fluid non-random lattice fluid model with Veytsman statistics for (intra + inter)-molecular association.     

A topographic view of the Pt(1 1 1) surface at the electrochemical interface in the presence of carbon monoxide

In this communication we present topographic images of the Pt(1 1 1) surface in CO saturated 0.1 M HClO₄, obtained by scanning tunneling microscopy.The topography presents two different structures, depending on the CO adsorption potential (E_ad = 0.15 V or E_ad = 0.5 V vs RHE). For adsorption at 0.15 V the system presents a heterogeneous appearance, which totally covers the surface and impedes the observation of steps on the substrate surface. When CO is adsorbed at 0.5 V large clusters forming chains along the steps are observed. These aggregates can be, tentatively, correlated with the H-bonded water structure suggested earlier on the basis of FTIR spectroscopy. The clusters have inhibitory effects on CO oxidation.     

A (vapor + liquid) equilibria of the {carbon dioxide + isopropoxyethanol (iC3E1)} and the {carbon dioxide + isobutoxyethanol (iC4E1)} systems

Binary (vapor + liquid) equilibrium data were measured for the {carbon dioxide + isopropoxyethanol (iC₃E₁)} and the {carbon dioxide + isobutoxyethanol (iC₄E₁)} systems at temperatures ranging from (313.15 to 333.15) K. These experiments were performed with a circulating-type apparatus with on-line gas chromatography. The experimental data correlated well with the Peng–Robinson equation of state using the Wong–Sandler mixing rules.     

(Liquid + liquid) equilibria of ternary and quaternary systems containing n-hexane,toluene, m-xylene,propanol, sulfolane,and water at T = 303.15 K

(Liquid + liquid) equilibrium data for ternary and quaternary systems containing n-hexane (C₆H₁₄), toluene (C₇H₈), m-xylene (C₈H₁₀), propanol (C₃H₈O), sulfolane (C₄H₈SO₂), and water (H₂O) were measured at T = 303.15 K. Phase diagrams of {w₁C₄H₈SO₂ + w₂C₇H₈ + (1 − w₁ − w₂)C₆H₁₄}, {w₁C₄H₈SO₂ + w₂C₈H₁₀ + (1 − w₁ − w₂)C₆H₁₄}, {w₁C₄H₈SO₂ + w₂C₃H₈O + w₃C₇H₈ + (1 − w₁ − w₂ − w₃)C₆H₁₄} and also systems containing water: {w₁C₄H₈SO₂ + w₂H₂O + w₃C₇H₈ + (1 − w₁ − w₂ − w₃)C₆H₁₄} and {w₁C₄H₈SO₂ + w₂H₂O + w₃C₈H₁₀ + (1 − w₁ − w₂ − w₃)C₆H₁₄} (w = mass fraction) were obtained at T = 303.15 K. The (liquid + liquid) equilibrium data of the systems were used to obtain interaction parameters in non-random two-liquid (NRTL) and universal quasi-chemical theory (UNIQUAC) activity coefficient models. These parameters can be used to predict equilibrium data of ternary and quaternary systems. The root mean square deviations (RMSDs) using these models were calculated and reported. The partition coefficients and the selectivity factors of solvents for extraction of toluene or m-xylene from n-hexane at T = 303.15 K are calculated and presented. The experimental selectivity factors of sulfolane for the system {w₁C₄H₈SO₂ + w₂C₇H₈ + (1 − w₁ − w₂)C₆H₁₄} at T = 298.15 K and T = 323.15 K were taken from the literature and the influence of temperature on the extraction of toluene was also investigated. The phase diagrams for the ternary and quaternary systems including both the experimental and correlated tie lines are presented. The tie-line data of the studied systems were also correlated using the Hand equation and the correlation parameters are calculated and reported.     

Energetic characterisation of the system (water + 1-propoxypropan-2-ol) at T = 298.15 K

Given the importance that enthalpic and entropic contributions have in the interplay between thermodynamics and self-assembly of aqueous amphiphile systems, the energetic characterisation of the system {water + 1-propoxypropan-2-ol (1-pp-2-ol)} at T = 298.15 K was made by directly measuring excess partial molar enthalpies of 1-pp-2-ol and water, over the entire composition range, at T = 298.15 K and atmospheric pressure. Derivatives of the partial molar properties with respect to the composition are used to improve the understanding of molecular interactions in the water-rich region. The present results were compared with those for the well-studied system {water + 2-butoxyethanol (nC₄E₁)}, the two amphiphiles being structural isomers.     

Excess molar volumes of (an alkane + 1-chloroalkane) atT = 298.15 K

The densities of the following: (pentane  +  1-chloropropane, or 1-chlorobutane, or 1-chloropentane, or 1-chlorohexane), (hexane  +  1-chloropropane, or 1-chlorobutane, or 1-chloropentane, or 1-chlorohexane), (heptane  +  1-chloropropane, or 1-chlorobutane, or 1-chloropentane, or 1-chlorohexane), (octane  +  1-chloropropane, or 1-chlorobutane, or 1-chloropentane, or 1-chlorohexane), were measured at T =  298.15 K by means of a vibrating-tube densimeter. The excess molar volumes V_m^E, calculated from the density data, are negative for (pentane  +  1-chloropentane, or 1-chlorohexane) and (hexane  +  1-chlorohexane) over the entire range of composition. (Pentane  +  1-chlorobutane), (hexane  +  1-chloropentane) and (heptane  +  1-chlorohexane) exhibit an S-shapedV_m^E dependence. For all the other systems,V_m^E is positive. The V_m^Eresults were correlated using the fourth-order Redlich–Kister equation, with the maximum likelihood principle being applied for determining the adjustable parameters.     

Adsorption of hydrogen on Pt(1 1 1) and Pt(1 0 0) surfaces and its role in the HOR

Hydrogen adsorption isotherms, evaluated by combination of cyclic voltammetry and chronoamperometry, are reported on Pt(1 1 1) and Pt(1 0 0) surfaces in 0.1 M HClO₄. We found that at E > 0.05 V Pt(1 1 1) and Pt(1 0 0) are only partially covered by the adsorbed hydrogen (H_ad). On both surfaces, a full monolayer of the adsorbed hydrogen is completed at −0.1 V, i.e. the adsorption of atomic hydrogen is observed in the hydrogen evolution potential region. We also found, that the activity of the hydrogen oxidation reaction is mirrored by the shape of the hydrogen adsorption isotherms, implying that H_ad is in fact a spectator in the HOR.     

Thermodynamics of proton dissociations from aqueous l-methionine at temperatures from (278.15 to 393.15) K,molalities from (0.0125 to 1.0) mol · kg−1, and at the pressure 0.35 MPa: Apparent molar heat capacities and apparent molar volumes of l-methionine,methioninium chloride,and sodium methioninate

We have measured the densities of aqueous solutions of l-methionine, l-methionine plus equimolal HCl, and l-methionine plus equimolal NaOH at temperatures 278.15 ⩽ T/K ⩽ 368.15, at molalities 0.0125 ⩽ m/mol · kg⁻¹ ⩽ 1.0 as solubilities allowed, and at p = 0.35 MPa using a vibrating tube densimeter. We have also measured the heat capacities of these solutions at 278.15 ⩽ T/K ⩽ 393.15 and at the same m and p using a twin fixed-cell differential temperature-scanning calorimeter. We used the densities to calculate apparent molar volumes V_ϕ and the heat capacities to calculate apparent molar heat capacities C_p,ϕ for these solutions. We used our results and values from the literature for V_ϕ(T, m) and C_p,ϕ(T, m) for HCl(aq), NaOH(aq), and NaCl(aq) and the molar heat capacity change Δ_rC_p,m(T, m) for ionization of water to calculate parameters for Δ_rC_p,m(T, m) for the two proton dissociations from protonated aqueous cationic l-methionine. We integrated these results in an iterative algorithm using Young’s Rule to account for the effects of speciation and chemical relaxation on V_ϕ(T, m) and C_p,ϕ(T, m). This procedure yielded parameters for V_ϕ(T, m) and C_p,ϕ(T, m) for methioninium chloride {H₂Met⁺Cl⁻(aq)} and for sodium methioninate {Na⁺Met⁻(aq)} which successfully modeled our observed results. Values are given for Δ_rC_p,m, Δ_rH_m, pQ_a, Δ_rS_m, and Δ_rV_m for the first and second proton dissociations from protonated aqueous l-methionine as functions of T and m.     

(Solid + solute) phase equilibria in aqueous solution. XIII. Thermodynamic properties of hydrozincite and predominance diagrams for (Zn2 + + H2O + CO2)

The thermodynamic properties ofZn₅(OH)₆(CO₃)₂ , hydrozincite, have been determined by performing solubility and d.s.c. measurements. The solubility constant in aqueous NaClO₄media has been measured at temperatures ranging from 288.15 K to 338.15 K at constant ionic strength (I =  1.00 mol · kg ^− 1). Additionally, the dependence of the solubility constant on the ionic strength has been investigated up to I =  3.00 mol · kg ^− 1NaClO₄at T =  298.15 K. The standard molar heat capacity C_{p, m}^ofunction fromT =  318.15 K to T =  418.15 K, as well as the heat of decomposition of hydrozincite, have been obtained from d.s.c. measurements. All experimental results have been simultaneously evaluated by means of the optimization routine of ChemSage yielding an internally consistent set of thermodynamic data (T =  298.15 K): solubility constant log ^* K_{ps 0}⁰ =  (9.0  ±  0.1), standard molar Gibbs energy of formationΔ_fG_m^o {Zn₅(OH)₆(CO₃)₂ }  =  ( − 3164.6  ±  3.0)kJ · mol ^− 1, standard molar enthalpy of formation Δ_fH_m^o{Zn₅(OH)₆(CO₃)₂ }  =  ( − 3584  ±  15)kJ · mol ^− 1, standard molar entropy S_m^o{Zn₅(OH)₆(CO₃)₂ }  =  (436  ±  50)J · mol ^− 1· K ^− 1and C_p,m^o / (J · mol ^− 1· K ^− 1)  =  (119  ±  11)  +  (0.834  ±  0.033)T / K. A three-dimensional predominance diagram is introduced which allows a comprehensive thermodynamic interpretation of phase relations in(Zn^2 +  +  H₂O  +  CO₂) . The axes of this phase diagram correspond to the potential quantities: temperature, partial pressure of carbon dioxide and pH of the aqueous solution. Moreover, it is shown how the stoichiometric composition{n(CO₃) / n(Zn)} of the solid compoundsZnCO₃ and Zn₅(OH)₆(CO₃)₂can be checked by thermodynamically analysing the measured solubility data.     

Hot band spectroscopy of CCO in the C–O stretching region: The (ν1 + 2ν3) − 2ν3 and (2ν1 + ν3) − (ν1 + ν3) bands

Two C–O stretching hot bands, (ν₁ + 2ν₃) − 2ν₃ and (2ν₁ + ν₃) − (ν₁ + ν₃), of the CCO radical in the ground electronic state were measured. These hot bands are red shifted by approximately 70 cm⁻¹ compared to the C–O stretching fundamental. CCO was produced in a discharge through a flowing mixture of carbon suboxide and helium. The spectra were recorded using a diode laser spectrometer. The band origins were determined to be 1904.32512(62) and 1902.69130(56) cm⁻¹ for (ν₁ + 2ν₃) − 2ν₃ and (2ν₁ + ν₃) − (ν₁ + ν₃), respectively. The measurements in this band together with previously reported frequencies in the C–C and C–O stretching regions were analysed to determine harmonic frequencies and anharmonicity constants.     

Thermodynamics of proton dissociations from aqueous alanine at temperatures from (278.15 to 393.15) K,molalities from (0.0075 to 1.0) mol · kg−1, and at the pressure 0.35 MPa: Apparent molar heat capacities and apparent molar volumes of alanine,alaninium chloride,and sodium alaninate

We have measured the densities of aqueous solutions of alanine, alanine plus equimolal HCl, and alanine plus equimolal NaOH at temperatures 278.15 ⩽ T/K ⩽ 368.15, at molalities 0.0075 ⩽ m/mol · kg⁻¹ ⩽ 1.0, and at the pressure p = 0.35 MPa using a vibrating tube densimeter. We have also measured the heat capacities of these solutions at 278.15 ⩽ T/K ⩽ 393.15 and at the same m and p using a twin fixed-cell differential temperature-scanning calorimeter. We used the densities to calculate apparent molar volumes V_ϕ and the heat capacities to calculate apparent molar heat capacities C_p,ϕ for these solutions. We used our results and values from the literature for V_ϕ(T, m) and C_p,ϕ(T, m) for HCl(aq), NaOH(aq), and NaCl(aq) and the molar heat capacity change Δ_rC_p,m(T, m) for ionization of water to calculate parameters for Δ_rC_p,m(T, m) for the two proton dissociations from protonated aqueous cationic alanine. We integrated these results in an iterative algorithm using Young’s Rule to account for the effects of speciation and chemical relaxation on V_ϕ(T, m) and C_p,ϕ(T, m). This procedure yielded parameters for V_ϕ(T, m) and C_p,ϕ(T, m) for alaninium chloride {H₂Ala⁺Cl⁻(aq)} and for sodium alaninate {Na⁺Ala⁻(aq)} which successfully modeled our observed results. Values are given for Δ_rC_p,m, Δ_rH_m, pQ_a, Δ_rS_m, and Δ_rV_m for the first and second proton dissociations from protonated aqueous alanine as functions of T and m.     

Thermodynamics of proton dissociations from aqueous threonine and isoleucine at temperatures from (278.15 to 393.15) K,molalities from (0.01 to 1.0) mol · kg−1, and at the pressure 0.35 MPa: Apparent molar heat capacities and apparent molar volumes of zwitterionic,protonated cationic,and deprotonated anionic forms

We have measured the densities of aqueous solutions of isoleucine, threonine, and equimolal solutions of these two amino acids with HCl and with NaOH at temperatures 278.15 ⩽ T/K ⩽ 368.15, at molalities 0.01 ⩽ m/mol · kg⁻¹ ⩽ 1.0, and at the pressure 0.35 MPa using a vibrating tube densimeter. We have also measured the heat capacities of these solutions at 278.15 ⩽ T/K ⩽ 393.15 and at the same m and p using a twin fixed-cell differential temperature-scanning calorimeter. We used the densities to calculate apparent molar volumes V_ϕ and the heat capacities to calculate apparent molar heat capacities C_p,ϕ for these solutions. We used our results and values from the literature for V_ϕ(T, m) and C_p,ϕ(T, m) for HCl(aq), NaOH(aq), and NaCl(aq) and the molar heat capacity change Δ_rC_p,m(T, m) for ionization of water to calculate parameters for Δ_rC_p,m(T, m) for the two proton dissociations from each of the protonated aqueous cationic amino acids. We used Young’s Rule and integrated these results iteratively to account for the effects of equilibrium speciation and chemical relaxation on V_ϕ(T, m) and C_p,ϕ(T, m). This procedure gave parameters for V_ϕ(T, m) and C_p,ϕ(T, m) for threoninium and isoleucinium chloride and for sodium threoninate and isoleucinate which modeled our observed results within experimental uncertainties. We report values for Δ_rC_p,m, Δ_rH_m, pQ_a, Δ_rS_m, and Δ_rV_m for the first and second proton dissociations from protonated aqueous threonine and isoleucine as functions of T and m.     

Excess properties and vapour pressure of (3-diethylaminopropylamine + n-alkanes)

The vapour pressures of liquid (3-diethylaminopropylamine (3-DEPA) + n-heptane) mixtures were measured by a static method between T = (303.15 and 343.15) K at 10 K intervals. The molar excess enthalpies H^E at T = 303.15 K were measured for the systems {3-DEPA + C_nH_2n+2 (n = 6, 7, 12)}. The molar excess Gibbs free energies G^E were obtained with Barker’s method and fitted to the Redlich–Kister equation. The Wilson equation was also used. Deviations between experimental and predicted G^E and H^E, by using group contribution UNIFAC (Gmehling version) model, were evaluated.     

Temperature dependence of the excess molar volume of (heptane + 1-chloroalkane)

The densities of (heptane + 1-chlorobutane, or 1-chloropentane, or 1-chlorohexane) were measured at the temperatures (308.15, 318.15, and 328.15) K by means of a vibrating-tube densimeter. The excess molar volumes, V_m^E, calculated from the density data, along with our previous data⁽¹⁾ determined at T=298.15 K for the same systems, provide the temperature dependence of V_m^E in the temperature range of 298 to 328 K. The V_m^E results were correlated using the fourth-order Redlich–Kister equation, with the maximum likelihood principle applied for the determination of the adjustable parameters. It was found that the deviations from ideal behaviour (both positive and negative) in the systems studied increase with increasing temperature.     

Excess molar enthalpies of the ternary mixtures: (tetrahydrofuran or 2-methyltetrahydrofuran + methyl tert-butyl ether + n-octane) at the temperature 298.15 K

Microcalorimetric measurements of excess enthalpies at the temperature T = 298.15 K are reported for the two ternary mixtures {x₁(C₄H₈O or C₅H₁₀O) + x₂C₅H₁₂O + x₃C₈H₁₈}. Smooth representations of the results are presented and used to construct constant excess molar enthalpy contours on Roozeboom diagrams. It is shown that good estimates of the ternary enthalpies can be obtained from the Liebermann and Fried model, using only the physical properties of the components and their binary mixtures.     

Measurements of HmE and VmE for (propane + sulphurhexafluoride) in the near critical region

A flow mixing calorimeter followed by a vibrating-tube densimeter has been used to measure excess molar enthalpies H_m^E and excess molar volumesV_m^E of {xC₃H₈ +  (1  − x)SF₆}. Measurements over a range of mole fractionsx have been made at the pressure p =  4.30 MPa at eight temperatures in the rangeT =  314.56 K to 373.91 K, in the liquid region at p =  3.75 MPa andT =  314.56 K, in the two phase region at p =  3.91 MPa andT =  328.18 K, and in the supercritical region at p =  5.0 MPa andT =  373.95 K. The measurements are compared with results from the Patel–Teja equation of state which reproduces the main features of the excess function curves as well as it does for similar measurements on{xCO₂ +  (1  − x)C₂H₆} ,{xCO₂ +  (1  − x)C₂H₄} and{xCO₂ +  (1  − x)SF₆} reported previously.     

Apparent molar volumes and apparent molar heat capacities of aqueous KI,HIO3, NaIO3, and KIO3 at temperatures from 278.15 K to 393.15 K and at the pressure 0.35 MPa

We determined apparent molar volumes V_? at 298.15 ? (T/K) ? 368.15 and apparent molar heat capacities C_p,? at 298.15 ? (T/K) ? 393.15 for aqueous solutions of HIO₃ at molalities m from (0.015 to 1.0) mol · kg^?1, and of aqueous KIO₃ at molalities m from (0.01 to 0.2) mol · kg^?1 at p = 0.35 MPa. We also determined V_? at the same p and at 298.15 ? (T/K) ? 368.15 for aqueous solutions of KI at m from (0.015 to 7.5) mol · kg^?1. We determined C_p,? at the same p and at 298.15 ? (T/K) ? 393.15 for aqueous solutions of KI at m from (0.015 to 5.5) mol · kg^?1, and for aqueous solutions of NaIO₃ at m from (0.02 to 0.15) mol · kg^?1. Values of V_? were determined from densities measured with a vibrating-tube densimeter, and values of C_p,? were determined with a twin fixed-cell, differential temperature-scanning calorimeter. Empirical functions of m and T were fitted to our results for each compound. Values of K_a, Δ_rH_m, and Δ_rC_p,m for the proton ionization reaction of aqueous HIO₃ are calculated and discussed.     

Near critical measurements of HmE andVmE for (ethane + sulphur hexafluoride)

A flow mixing calorimeter and a vibrating-tube densimeter have been used to measure excess molar enthalpies H_m^E and excess molar volumes V_m^E of {xC₂H₆ +  (1  − x)SF₆ }. Measurements over a range of mole fractions x have been made at T =  305.65 K and T =  312.15 K and at the pressures (3.76, 4.32, 4.88 and 6.0) MPa. The pressure 3.76 MPa is close to the critical pressure of SF₆, the pressure 4.88 MPa is close to the critical pressure of C₂H₆, and the pressure 4.32 MPa is midway between these values. The measurements are compared with the Patel–Teja equation of state which reproduces the main features of the excess function curves as well as it does for similar measurements on {xCO₂ +  (1  − x)C₂H₆ }, {xCO₂ +  (1  − x)C₂H₄ } and {xCO₂ +  (1  − x)SF₆ }.