一种高效的局部径向基点插值无网格方法

提出了一种弹性动力分析的高效局部径向基点插值无网格方法(MLRPI).该方法采用径向基点插值形函数近似解变量,运用局部Petrov-Galerkin法推导出了相应的离散方程,并根据波动模拟的精度要求,得到某一结点的动力方程.然后采用Newmark常平均加速度法和中心差分法相结合的显式积分格式进行时域积分,得到每个自由度的一种解耦递推格式.最后,对一平面应变问题进行了求解,比较了该文提出的解耦MI.RPI方法、常规MLRPI方法和ANSYS有限元方法的精度和计算时间,结果表明解耦MLRPI方法与常规MLRPI方法的精度相当,但计算效率大大提高.     

Local Heaviside‐weighted LRPIM meshless method and its application to two‐dimensional potential flows

In this paper, the local radial point interpolation meshless method (LRPIM) is used for the analysis of two‐dimensional potential flows, based on a local‐weighted residual method with the Heaviside step function as the weighting function over a local subdomain. Trial functions are constructed using radial basis functions. The present method is a truly meshless method based only on a number of randomly located nodes. Integration over the subdomains requires only a simple integration cell to obtain the solution. No element matrix assembly is required and no special treatment is needed to impose the essential boundary conditions. The novelty of the paper is the use of a local Heaviside weight function in the LRPIM, which does not need local domain integration and integrations only on the boundary of the local domains are needed. Effects of the sizes of local subdomain and interpolation domain on the performance of the present method are investigated. The behavior of shape parameters of multiquadrics has been systematically studied. Two numerical tests in groundwater and fluid flows are presented and compared with closed‐form solutions and finite element method. The results show that the use of a local Heaviside weight function in the LRPIM is highly accurate and possesses no numerical difficulties. Copyright © 2008 John Wiley & Sons, Ltd.     

Numerical simulation of ground water flow via a new approach to the local radial point interpolation meshless method

A novel approach to local radial point interpolation meshless (LRPIM) method is introduced to investigate the influence of leakage on tidal response in a coastal leaky confined aquifer system, based on a local weighted residual method with the Heaviside step function as the weighting function over a local sub-domain. The present approach is a truly meshless method based only on a number of randomly located nodes. In this approach, neither global background integration mesh nor domain integration is needed. Radial basis functions (RBFs) interpolation is employed in shape function and its derivatives construction for evaluating the local weak form integrals. Due to satisfaction of kronecker delta property in RBF interpolation, no special treatment is needed to impose the essential boundary conditions. In order to obtain the optimum parameters, shape parameters of multiquadrics (MQ)-RBF are tuned and studied. The leakage has a significant impact on the tidal behaviour of the confined aquifer. The numerical results of this research indicate that both tidal amplitude of groundwater head in the aquifer and the distance over which the aquifer can be disturbed by the tide are considerably reduced by leakage. The novelty of the approach is the use of a local Heaviside weight function in the LRPIM which does not need local domain integration and only integrations on the boundary of the local domains are needed. Therefore, in this research a new local Heaviside weight function has been proposed. Numerical results are presented and compared with the results of analytical solution. It is observed that the obtained results agreed very well with the results of analytical solution. The numerical results show that the use of a local Heaviside weight function in the LRPIM is highly accurate, fast and robust. It is also noticed that this novel meshless approach using MQ radial basis is very stable.     

基于径向基函数的无单元法的改进

基于径向基函数强形式的无单元(RBFS)法是真正意义上的无单元方法,但为了追求精度要求却未达到稀疏化。本文对RBFS进行了改进,通过构造具有δ函数性质的形函数,得到了具有稀疏带状性的系数矩阵,提高了计算效率,同时具有RBFS方法的优点。通过求解微分方程,得到节点均布时影响域半径与求解精度的关系曲线,验证了基函数中自由参数最佳取值的计算公式的适用性;并把节点均布下得到的影响域半径和自由参数的规律应用到节点任意排列的情况下,求解结果变化不大,均满足精度要求,由此得出这些规律仍然适用,这种无单元法对节点位置不敏感。     

THE MESHLESS SOLUTION FOR BENDING ANALYSIS OF FUNCTIONALLY GRADED BEAMS

利用全局薄板样条径向基配点法分析了功能梯度梁的弯曲问题,径向基函数的形状参数对近似精度有很大的影响,而薄板样条径向基函数的形状参数选取比其他径向基函数要容易. 利用高阶剪切变形理论推导了控制微分方程,将该文的计算结果与已有参考文献中的结果进行了对比,以验证该文方法的精度.     

基于单位分解法的无网格数值流形方法

在数值流形方法和单位分解法的基础上，提出了无网格数值流形方法. 无网格数值流形 方法在分析时采用了双重覆盖系统，即数学覆盖和物理覆盖. 数学覆盖提供的节点形成求解 域的有限覆盖和单位分解函数；而物理覆盖描述问题的几何区域及其域内不连续性. 与原有 的数值流形方法相比，无网格数值流形方法的数学覆盖形状更加灵活，可以用一系列节点的 影响域来建立数学覆盖和单位分解函数，具有无网格方法的特性，从而摆脱了传统的数值流 形方法中网格所带来的困难. 与无网格方法相比，由于采用了有限覆盖技术，试函数的构造 不受域内不连续的影响，克服了原有的无网格方法在处理不连续问题时所遇到的困难. 详细推导了无网格数值流形方法的试函数和求解方程，最后给出了算例，验证了该方法的正 确性.     

基于径向基函数的无单元法求解力学问题误差分析

径向基函数形状参数的选择在无单元法数值计算中一直是一个热门的问题,现在已总结出许多确定形状参数的经验公式. 但还没有相关研究表明这些形状参数是如何随着影响域尺寸而变化的. 本文研究了MQ(multi-quadrics) 径向基函数中形状参数对无单元法计算误差的影响. 首先,从理论上分析了形函数导数随着形状参数值的变化趋势,和以计算点为中心节点对称布置与不对称布置的形函数导数的变化规律;然后分析了影响域尺寸对误差的影响,得到了在不同影响域尺寸下,误差随形状参数值变化的规律;在此基础上,给出了影响域范围值.     

无网格局部Petrov-Galerkin方法中本质边界条件的处理

鉴于无网格局部Petrov-Galerkin方法(MLPG)形函数的非插值性质,将一种新的本质边界处理方案——完全变换法与MLPG结合,通过变换矩阵修正形函数,使其满足Kronecker-δ条件,实现了本质边界的精确实施。进一步与MLPG中通常处理边界的罚方法作了比较研究,数值结果表明新方法的可靠性与精确度。     

中厚板的耦合多项式基径向点插值无网格法

采用Mindlin平板理论,通过最小位能原理建立了各向同性中厚板的伽辽金整体弱式方 程,形函数采用耦合多项式基的径向点插值法构造,可以直接施加本质边界条件. 算例表明, 用耦合多项式基的径向点插值无网格法分析中厚板问题,具有效率高、精度高和易于实现等 优点,可以避免薄板弯曲时的剪切自锁现象.     

Steady‐state solution of incompressible Navier–Stokes equations using discrete least‐squares meshless method

A fractional step method for the solution of the steady state incompressible Navier–Stokes equations is proposed in this paper in conjunction with a meshless method, named discrete least‐squares meshless (DLSM). The proposed fractional step method is a first‐order accurate scheme, named semi‐incremental fractional step method, which is a general form of the previous first‐order fractional step methods, i.e. non‐incremental and incremental schemes. One of the most important advantages of the proposed scheme is its capability to use large time step sizes for the solution of incompressible Navier–Stokes equations. DLSM method uses moving least‐squares shape functions for function approximation and discrete least‐squares technique for discretization of the governing differential equations and their boundary conditions. As there is no need for a background mesh, the DLSM method can be called a truly meshless method and enjoys symmetric and positive‐definite properties. Several numerical examples are used to demonstrate the ability and the efficiency of the proposed scheme and the discrete least‐squares meshless method. The results are shown to compare favorably with those of the previously published works. Copyright © 2010 John Wiley & Sons, Ltd.     

反平面断裂问题的无单元伽辽金比例边界法

将比例边界法与无单元伽辽金法相结合,建立了反平面断裂分析的无单元伽辽金比例边界法。这是一种边界型无网格法,在环向方向上采用无单元伽辽金法进行离散,因此计算时仅需要边界上的节点信息,不需要边界元所要求的基本解。为了便于施加本质边界条件,通过建立节点值和虚拟节点值之间的关系给出了修正的移动最小二乘形函数。在径向方向上,该方法利用解析的方法求解,因此是一种半解析的数值方法。最后,给出了数值算例,并验证了所提方法后处理简单和计算精度高的特点,适合于求解反平面断裂问题。     

The determination of biot's parameters for sandstones

One of the acceptable theories in describing the wave motions in fluid saturated porous rocks is Biot's theory² In this paper, we present the procedures in the determination of the parameters in Biot's theory. One artificial rock “Alundum’ and three types of natural sandstones were tested. The calculated wave speeds in the rock specimens, based on the experimentally determined Biot's parameters, were found in good agreement with the measured dilatational wave speeds using the ultrasonic pulse method     

用无网格局部径向点插值法分析非均质中厚板的弯曲问题

用无网格局部径向点插值法分析了非均质中厚板的弯曲问题.利用虚位移原理推导了中厚板的离散系统方程.采用径向基函数耦合多项式基函数来近似试函数,用四次样条函数作为加权残值公式中的权函数.所构造成的形函数具有Kronecker delta性质,可以很方便地施加本质边界条件.此方法不需要任何形式的网格划分,所有的积分都在规则形状的子域及其边界上进行,是一种真正的无网格方法.在计算过程中,取积分中的高斯点的材料参数来模拟问题域材料特性的变化.算例结果表明这种无网格方法具有效率高、精度高和易于实现等优点.     

基于径向基函数的无网格方法

改进的基于径向基函数的强形式的无单元法（improved radial-basis-function strong-form meshless method,简称IRBFS）是真正意义上的无网格方法,介绍基本原理,求解弹性平面问题,验证了径向基函数的自由参数的最佳取值公式和稀疏化规律的适用性．     

Complex variable function method for the scattering of plane waves by an arbitrary hole in a porous medium

Based on the complex variable function method, a new approach for solving the scattering of plane elastic waves by a hole with an arbitrary configuration embedded in an infinite poroelastic medium is developed in the paper. The poroelastic medium is described by Biot's theory. By introducing three potentials, the governing equations for Biot's theory are reduced to three Helmholtz equations for the three potentials. The series solutions of the Helmholtz equations are obtained by the wave function expansion method. Through the conformal mapping method, the arbitrary hole in the physical plane is mapped into a unit circle in the image plane. Integration of the boundary conditions along the unit circle in the image plane yields the algebraic equations for the coefficients of the series solutions. Numerical solution of the resulting algebraic equations yields the displacements, the stresses and the pore pressure for the porous medium. In order to demonstrate the proposed approach, some numerical results are given in the paper.     

形状设计灵敏度分析的改进的再生核质点法

基于物质导数概念和直接微分法,将再生核质点法应用于形状设计灵敏度分析（DSA）中。导出了基于无网格近似的灵敏度方程,特别强调了在考虑形状函数关于设计变量的物质导数时无网格方法与有限元法的不同。通过对RKPM形状函数及其物质导数进行矩式显式表述,提高了无网格方法的计算效率。对两个二维线弹性问题进行了位移灵敏度和应力灵敏度分析,计算结果与解析解吻合的很好;同时通过对通常的RKPM和改进的RKPM计算耗时的比较,显示了该方法不仅有效,而且可以显著地提高计算效率。     

流体饱和多孔介质动力问题的显式时域解法

为了简化分析,Zienkiewicz等基于Biot理论,在忽略流体相对于土骨架运动的加速度条件下,建立了以土骨架位移u和孔隙流体压力p为基本变量的u-p格式饱和两相介质动力方程。针对该u-p方程,在空间上,采用伽辽金法有限元离散,并结合对角化形式的质量矩阵和流体压缩矩阵,忽略相邻结点间的惯性和流体压缩量间的耦合作用。在时域内,基于杜修力等提出的显式算法和Euler预估-校正法,建立了一种具有二阶精度的全显式时域积分法。采用一维饱和土模型,对比提出算法的数值解与Simon方法的解析解,发现两者吻合良好,验证了本文方法的正确性。并分析了饱和土二维动力问题,以及渗透系数和排水条件对饱和土动力响应的影响。     

非均质中厚板的无网格LRPIM动力学分析

用局部加权残值法建立了非均质中厚板的局部径向点插值离散系统方程,采用无网格局部径向点插值法分析了非均质中厚板的自由振动和强迫振动问题。用径向基函数耦合多项式基函数来近似试函数,用四次样条函数做为加权残值法中的权函数。所构造的形函数具有Kronecker delta性质,可以很方便地施加本质边界条件。该方法不需要任何形式的网格划分,所有的积分都在规则形状的子域及其边界上进行。在计算过程中,取积分中的高斯点的材料参数来模拟问题域材料特性的变化。计算结果表明,利用该方法计算非均质中厚板的自由振动和强迫振动问题可以得到具有较高精度的解。     

MESHLESS METHOD OF DUAL RECIPROCITY HYBRID RADIAL BOUNDARY NODE METHOD FOR ELASTICITY

Combining the radial point interpolation method （RPIM）, the dual reciprocity method （DRM） and the hybrid boundary node method （HBNM）, a dual reciprocity hybrid radial boundary node method （DHRBNM） is proposed for linear elasticity. Compared to DHBNM, RPIM is exploited to replace the moving least square （MLS） in DHRBNM, and it gets rid of the deficiency of MLS approximation, in which shape functions lack the delta function property, the boundary condition can not be applied easily and directly and it＇s computational expense is high. Besides, different approximate functions are discussed in DRM to get the interpolation property, in which the accuracy and efficiency for different basis functions are compared. Then RPIM is also applied in DRM to replace the conical function interpolation, which can greatly improve the accuracy of the present method. To demonstrate the effectiveness of the present method, DHBNM is applied for comparison, and some numerical examples of 2-D elasticity problems show that the present method is much more effective than DHBNM.     

弹性动力学的双互易杂交边界点法

将双互易法同杂交边界点法相结合,提出了求解弹性动力问题的新型数值方法------双互易杂交边界点方法. 该算法在求解弹性动力问题时,将控制方程非齐次项的域内积分转化为边界积分. 该方法将问题的解分为通解和特解两部分,通解使用杂交边界点法求得,特解则使用局部径向基函数插值得到,从而实现了使用静力问题的基本解来求解动力问题. 计算时仅仅需要边界上离散点的信息,无论积分还是插值都不需要网格,域内节点仅用来插值非齐次项,因此该算法仍是一种边界类型的无网格方法. 数值算例表明,该方法后处理简单,计算精度高,适合于求解弹性动力问题.