Designing composite polymer electrolytes for all-solid-state lithium batteries

Ceramic fast-ion conductors have high ionic conductivities (>10^?4 S cm^?1) but are difficult to process and have poor chemo/mechanical properties at the electrode/electrolyte interfaces. In contrast, polymer electrolytes are pliable and easy to process but suffer from low room-temperature ionic conductivities (≈10^?6-10^?7 S cm^?1). Combining these two elements to form a composite polymer electrolyte is a promising way to enable all-solid-state lithium-metal batteries. The choice of ceramic filler and polymer can be tailored to provide synergistic benefits that overcome the practical shortcomings of the two components. Herein, the fundamentals of Li⁺ conduction through the various phases and interfaces in these materials are discussed as well as the important parameters, beyond the initial choice of polymer and ceramic filler materials that must be considered while designing composite polymer electrolytes. Emphasis is placed on the particle filler engineering and practical fabrication methods as routes toward enhancing the properties of these composites.     

锂离子电池正极材料LiNi_0.5Mn_1.5O_4表面包覆CuO的研究

本文首先通过共沉淀法和固相球磨法制备了纳米级的LiNi0.5Mn1.5O4高电压正极材料,然后通过溶胶-凝胶法制备了表面包覆CuO的CuO-LiNi0.5Mn1.5O4复合材料.通过对CuO包覆量为1%,3%和5%的复合材料的电化学性能对比,发现当包覆量为1%时,材料的性能最佳.在1 C下,材料的放电比容量高达126.1 mA h g?1,循环100次后容量保持率在99.5%.CuO包覆在纳米LiNi0.5Mn1.5O4材料表面,阻止电解液与活性颗粒的直接接触,削弱了电解液与LiNi0.5Mn1.5O4的相互作用,进而在一定程度上减缓了电解液的分解;CuO的包覆同时还缓解了电解液中HF对材料的攻击,阻止了锰的溶解和由此带来的结构改变,进而提高了材料的循环稳定性.     

Interface engineering for composite cathodes in sulfide-based all-solid-state lithium batteries

All-solid-state lithium battery(ASLB)based on sulfide-based electrolyte is considered to be a candidate for the next-generation high-energy storage system.Despi...     

Poly(3,4-ethylenedioxythiophene)V2O5 hybrids for lithium batteries

A series of hybrid electrode materials, poly(3,4-ethylenedioxythiophene)/V₂O₅, has been synthesized using an oxidative insertion and polymerization reaction. FTIR, X-ray diffraction and transmission electron microscopy studies have shown that the incorporation of polymer between V₂O₅ slabs leads to an enhanced bidimensionality. The electrochemical lithium capacity has been increased up to ∼330 mAh/g at the second discharge in the range of 2.0–4.4 V vs. Li. This improvement of electrochemical performance compared to pristine V₂O₅ is attributed to the higher electric conductivity and enhanced bidimensionality.     

CNTs@S composite as cathode for all-solid-state lithium-sulfur batteries with ultralong cycle life

The main challenges in development of traditional liquid lithium-sulfur batteries are the shuttle effect at the cathode caused by the polysulfide and the safety concern at the Li metal anode arose from the dendrite formation. All-solid-state lithium-sulfur batteries have been proposed to solve the shuttle effect and prevent short circuits. However, solid-solid contacts between the electrodes and the electrolyte increase the interface resistance and stress/strain, which could result in the limited electrochemical performances.In this work, the cathode of all-solid-state lithium-sulfur batteries is prepared by depositing sulfur on the surface of the carbon nanotubes(CNTs@S) and further mixing with Li_(10) Ge P_2 S_(12) electrolyte and acetylene black agents. At 60 °C, CNTs@S electrode exhibits superior electrochemical performance, delivering the reversible discharge capacities of 1193.3, 959.5, 813.1, 569.6 and 395.5 m Ah g~(-1) at the rate of 0.1, 0.5,1, 2 and 5 C, respectively. Moreover, the CNTs@S is able to demonstrate superior high-rate capability of660.3 m Ah g~(-1) and cycling stability of 400 cycles at a high rate of 1.0 C. Such uniform distribution of the CNTs, S and Li_(10) Ge P_2 S_(12) electrolyte increase the electronic and ionic conductivity between the cathode and the electrolyte hence improves the rate performance and capacity retention.     

Nitridation-driven conductive Li4Ti5O12 for lithium ion batteries

To modify oxide structure and introduce a thin conductive film on Li4Ti5O12, thermal nitridation was adopted for the first time. NH3 decomposes surface Li4Ti5O12 to conductive TiN at high temperature, and surprisingly, it also modifies the surface structure in a way to accommodate the single phase Li insertion and extraction. The electrochemically induced Li4+deltaTi5O12 with a TiN coating layer shows great electrochemical properties at high current densities.     

Recent progress of composite solid polymer electrolytes for all-solid-state lithium metal batteries

In comparison with lithium-ion batteries (LIBs) with liquid electrolytes, all-solid-state lithium batteries (ASSLBs) have been considered as promising systems for future energy storage due to their safety and high energy density. As the pivotal component used in ASSLBs, composite solid polymer electrolytes (CSPEs), derived from the incorporation of inorganic fillers into solid polymer electrolytes (SPEs), exhibit higher ionic conductivity, better mechanical strength, and superior thermal/electrochemical stability compared to the single-component SPEs, which can significantly promote the electrochemical performance of ASSLBs. Herein, the recent advances of CSPEs applied in ASSLBs are presented. The effects of the category, morphology and concentration of inorganic fillers on the ionic conductivity, mechanical strength, electrochemical window, interfacial stability and possible Li⁺ transfer mechanism of CSPEs will be systematically discussed. Finally, the challenges and perspectives are proposed for the future development of high-performance CSPEs and ASSLBs.     

Li3V2(PO4)3/graphene nanocomposites as cathode material for lithium ion batteries

Li(3)V(2)(PO(4))(3)/graphene nanocomposites have been firstly formed on reduced graphene sheets as cathode material for lithium batteries. The nanocomposites synthesized by the sol-gel process exhibit excellent high-rate and cycling stability performance, owing to the nanoparticles connected with a current collector through the conducting graphene network.     

Chloride solid-state electrolytes for all-solid-state lithium batteries

Journal of Solid State Electrochemistry - Chloride solid-state electrolytes (SSEs) with wide electrochemical windows, high room-temperature ionic conductivity, and good stability towards air have...     

A flexible carbon nanotube@V2O5 film as a high-capacity and durable cathode for zinc ion batteries

Aqueous zinc-ion batteries (ZIBs) are receiving a continuously increasing attention for mobile devices,especially for the flexible and wearable electronics,due ...     

Template-free solvothermal synthesis of yolk-shell V2O5 microspheres as cathode materials for Li-ion batteries

Uniform yolk-shell V(2)O(5) microspheres were synthesized via a facile template-free solvothermal route and subsequent calcination treatment in air. The resulting cathode materials showed a high specific capacity of 220 mA h g(-1) after 30 cycles and good rate capability.     

V-MOF@graphene derived two-dimensional hierarchical V2O5@graphene as high-performance cathode for aqueous zinc-ion batteries

Rechargeable aqueous zinc-ion batteries (ZIBs) are attracting growing attention in the field of grid-scale energy storage systems due to their reliable safety and low cost. However, it is still hindered by the limited choices of suitable cathode materials with high performance for aqueous ZIBs. Herein, we developed a V-MOF@graphene derived two-dimensional hierarchical V₂O₅@graphene for the first time, where the porous V₂O₅ nanosheets are homogeneously attached to the 2D graphene substrate. Benefiting from the unique 2D composite structure with excellent electronic and ionic conductivity, adequate active sites, as well as the synergistic effect between the ultrathin V₂O₅ nanosheets and graphene, the V₂O₅@graphene here exhibits outstanding electrochemical performance in aqueous ZIBs. Particularly, it delivered an ultrahigh reversible capacity of 378 mAh/g at a current density of 2 A/g. What is more, a high specific capacity of 305 mAh/g after 100 cycles at 0.1 A/g and 200 mAh/g after 1,000 cycles at 1 A/g can be achieved. These ideal results suggest that the V₂O₅@graphene cathode hold great promise for high-performance aqueous zinc-ion batteries.     

Electrospun V2O5 nanostructures with controllable morphology as high-performance cathode materials for lithium-ion batteries

Porous V(2)O(5) nanotubes, hierarchical V(2)O(5) nanofibers, and single-crystalline V(2)O(5) nanobelts were controllably synthesized by using a simple electrospinning technique and subsequent annealing. The mechanism for the formation of these controllable structures was investigated. When tested as the cathode materials in lithium-ion batteries (LIBs), the as-formed V(2)O(5) nanostructures exhibited a highly reversible capacity, excellent cycling performance, and good rate capacity. In particular, the porous V(2)O(5) nanotubes provided short distances for Li(+)-ion diffusion and large electrode-electrolyte contact areas for high Li(+)-ion flux across the interface; Moreover, these nanotubes delivered a high power density of 40.2?kW?kg(-1) whilst the energy density remained as high as 201?W?h?kg(-1), which, as one of the highest values measured on V(2)O(5)-based cathode materials, could bridge the performance gap between batteries and supercapacitors. Moreover, to the best of our knowledge, this is the first preparation of single-crystalline V(2)O(5) nanobelts by using electrospinning techniques. Interestingly, the beneficial crystal orientation provided improved cycling stability for lithium intercalation. These results demonstrate that further improvement or optimization of electrochemical performance in transition-metal-oxide-based electrode materials could be realized by the design of 1D nanostructures with unique morphologies.     

V2O5@TiO2 composite as cathode material for lithium-ion storage with excellent performance

Journal of Solid State Electrochemistry - V2O5 is a promising candidate for cathode active material for Li-ion batteries due to its high theoretical specific capacity but suffers from poor rate...     

Porous V2O5-SnO2/CNTs composites as high performance cathode materials for lithium-ion batteries

Vanadium pentoxide (V₂O₅) exhibits high theoretical capacities when used as a cathode in lithium ion batteries (LIBs), but its application is limited by its structural instability as well as its low lithium and electronic conductivities. A porous composite of V₂O₅-SnO₂/carbon nanotubes (CNTs) was prepared by a hydrothermal method and followed by thermal treatment. The small particles of V₂O₅, their porous structure and the coexistence of SnO₂ and CNTs can all facilitate the diffusion rates of the electrons and lithium ions. Electrochemical impedance spectra indicated higher ionic and electric conductivities, as compared to commercial V₂O₅. The V₂O₅-SnO₂/CNTs composite gave a reversible discharge capacity of 198 mAh·g^?1 at the voltage range of 2.05–4.0 V, measured at a current rate of 200 mA·g^?1, while that of the commercial V₂O₅ was only 88 mAh·g^?1, demonstrating that the porous V₂O₅-SnO₂/CNTs composite is a promising candidate for high-performance lithium secondary batteries.     

Electrochemical performance of sulfur composite cathode materials for rechargeable lithium batteries

The structure and characteristic of carbon materials have a direct influence on the electrochemical performance of sulfur-carbon composite electrode materials for lithium-sulfur battery.In this paper,sulfur composite has been synthesized by heating a mixture of elemental sulfur and activated carbon,which is characterized as high specific surface area and microporous structure.The composite,contained 70%sulfur,as cathode in a lithium cell based on organic liquid electrolyte was tested at room temperature....     

Wet coordination method to prepare carbon-coated Li3V2(PO4)3 cathode material for lithium ion batteries

A convenient method named wet coordination is used to prepare the sample or carbon-coated Li₃V₂(PO₄)₃ in the furnace with a flowing argon atmosphere at 600 °C for 1 h. The sample is characterized by X-ray diffraction (XRD), scanning electron microscope (SEM), transmission electron microscopy (TEM) and energy dispersive analysis of X-rays (EDAX). Galvanostatic charge–discharge between 3.3 and 4.3 V (vs. Li/Li⁺) shows that the sample exhibits a high discharge capacity of 128 mAh g^?1 with a good reversible performance under a current density of 95 mA g^?1. It suggests that carbon-coated Li₃V₂(PO₄)₃ with good electrochemical performance can be obtained via this method, which is suitable for large-scale production.     

Crosslinked polyacrylonitrile precursor for S@pPAN composite cathode materials for rechargeable lithium batteries

S@pPAN has become promising cathode materials in rechargeable batteries due to its high compressed density,low E/S ratio,no polysulfide dissolution,no self-discharge,and stable cycling.However,it is a big challenge to enhance its sulfur content which determines its practical specific capacity.Herein,we prepare crosslinked PAN as precursor,leading to effective enhancement of sulfur content up to 55 wt%and a reversible specific capacity of 838 mAh g _composites^-1 at 0.2C.Because of the microporous structure and high specific area,crosslinked PAN provides more space to accommodate sulfur molecule and improve the interfacial reaction of S@pPAN as well.This work provides a promising direction to design S@pPAN for lithium sulfur batteries with high energy density.