Pushing Up Lithium Storage through Nanostructured Polyazaacene Analogues as Anode

According to the evidence from both theoretical calculations and experimental findings, conjugated ladder polymers containing large π‐conjugated structure, a high number of nitrogen heteroatoms, and a multiring aromatic system, could be an ideal organic anode candidate for lithium‐ion batteries (LIBs). In this report, we demonstrated that the nanostructured polyazaacene analogue poly(1,6‐dihydropyrazino[2,3g]quinoxaline‐2,3,8‐triyl‐7‐(2H)‐ylidene‐7,8‐dimethylidene) (PQL) shows high performance as anode materials in LIBs: high capacity (1750 mAh g^?1, 0.05C), good rate performance (303 mAh g^?1, 5C), and excellent cycle life (1000 cycles), especially at high temperature of 50 °C. Our results suggest nanostructured conjugated ladder polymers could be alternative electrode materials for the practical application of LIBs.     

Bimetal-organic frameworks derived Co/N-doped carbons for lithium-sulfur batteries

Lithium-sulfur (Li-S) batteries have received extensive attention due to their high theoretical specific energy density. However, the utilization of sulfur is seriously reduced by the shuttle effect of lithium polysulfides and the low conductivity of sulfur and lithium sulfide (Li₂S). Herein, we introduced bimetal-organic frameworks (Co/Zn-ZIF) derived cobalt and nitrogen-doped carbons (Co/N-C) into Li-S batteries through host design and separator modification. The Co/N-C in Li-S batteries effectively limits the shuttle effect through simultaneously serving as polysulfide traps and chemical catalyst. As a result, the Li-S batteries deliver a high reversible capacity of 1614.5 mAh/g and superior long-term cycling stability with a negligible capacity decay of only 0.04% per cycle after 1000 cycles. Furthermore, they have a high area capacity of 5.5 mAh/cm².     

新型有机二硫化物电池正极材料的研究进展

综述了有机二硫化物正极材料的发展过程。有机二硫化物可以用作锂二次电池的正极活性材料，在充电过程中，－ＳＨ氧化而生成Ｓ－Ｓ作为储能官能团；在放电过程中，Ｓ－Ｓ断裂还原成－ＳＨ，完成化学能向电能的转化。     

Bimetallic CoNiSe2/C nanosphere anodes derived from Ni-Co-metal-organic framework precursor towards higher lithium storage capacity

Through uncomplicated carbonation process, a carbon-embedded CoNiSe₂/C nanosphere was synthesized from Ni-Co-MOF (metal-organic framework) precursor whose controllable structure and synergistic effect of bimetallic Ni/Co brought CoNiSe₂/C anodes with high specific surface area (172.79 m²/g) and outstanding electrochemical performance. CoNiSe₂/C anodes obtained reversible discharge capacities of 850.9 mAh/g at 0.1 A/g after cycling for 100 cycles. In addition, CoNiSe₂/C exhibits excellent cycle stability and reversibility in the rate test at a current density of 0.1–2.0 A/g. When the current density returns to 0.5 A/g for 150 cycles, its discharge ratio the capacity is 330.8 mAh/g. Electrochemical impedance spectroscopy (EIS) tests suggested that CoNiSe₂/C anodes had a lower charge transfer impedance of 130.02 Ω after 30 cycles. In-situ X-ray diffraction (XRD) tests confirmed the alloying mechanism of CoNiSe₂/C which realized higher lithium storage capacity. This work affords substantial evidence for the extension of bimetallic selenides in secondary batteries, promoting the development of bimetallic selenides in anode materials for LIBs.     

Proton Intercalation/De-intercalation Chemistry in Phenazine-based Anode for Hydronium-ion Batteries

Hydronium-ion batteries have received significant attention owing to the merits of extraordinary sustainability and excellent rate abilities. However, achieving high-performance hydronium-ion batteries remains a challenge due to the inferior properties of anode materials in strong acid electrolyte. Herein, a hydronium-ion battery is constructed which is based on a diquinoxalino [2,3-a:2’,3’-c] phenazine (HATN) anode and a MnO₂@graphite felt cathode in a hybrid acidic electrolyte. The fast kinetics of hydronium-ion insertion/extraction into HATN electrode endows the HATN//MnO₂@GF battery with enhanced electrochemical performance. This battery exhibits an excellent rate performance (266 mAh g⁻¹ at 0.5 A g⁻¹, 97 mAh g⁻¹ at 50 A g⁻¹), attractive energy density (182.1 Wh kg⁻¹) and power density (31.2 kW kg⁻¹), along with long-term cycle stability. These results shed light on the development of advanced hydronium-ion batteries.     

Mesoporous carbon nanosheet-assembled flowers towards superior potassium storage

Potassium-ion batteries(PIBs) are attracted tremendous interest for large-scale energy storage systems(ESSs) owing to their economic merits.However,the main challenges of the PIBs are sluggish K-ion diffusion and large volume variations in the potassium repeated intercalation/deintercalation.Herein,mesoporous carbon nanosheet-assembled flowers(abbreviated as F-C) are designed as an original anode for superior-performance PIBs.Specifically,the F-C anode exhibits a high K-storage capacity(e.g.,381 mAh/g at 50 mA/g during the 2~(nd) cycle),excellent rate performance(e.g.,101 mAh/g at 2.0 A/g) and superior long cycle capability.Such excellent K-ion storage property is largely benefited from the large surface area(～141 m~2/g) and reasonable pore volume(0.465 cm~3/g),which not only stimulates rapid Kions diffusion and relieves the huge volume strain,but also exposes extensive active sites for K-ion capacitive storage.     

Facile simultaneous polymerization enabled in-situ confinement of size-tailored GeO2 nanocrystals in continuous S-Doped carbons for lithium storage

GeO₂ is a promising anode material for lithium ion batteries due to its high theoretical capacity (1126 mAh g^?1 for reversibly storing 4.4 Li⁺), and moderately low operating voltage (<1.5 V). Nevertheless, the fabrication of truly durable GeO₂ anode with satisfactory rate capability and cycling stability remains a big challenge because of its inherent low conductivity, and the large volume expansion upon charge-discharge that causes severe capacity fading. In this study, an innovative nanostructure with size-adjustable GeO₂ nanoparticles (16–26 nm) embedded in continuous S-doped carbon (GeO₂/S-doped carbon, GSC) has been successfully fabricated via a facile in-situ simultaneous polymerization method followed by heat treatment. The electrochemical results indicate that the as-prepared GSC composites show high reversible capacity (672.9 mAh g^?1 at 50 mA g^?1), superior rate capability (332.9 mAh g^?1 at 1000 mA g^?1), and long-term cycle life (179 mAh g^?1 after 500 cycles at 1000 mA g^?1) as anode materials for lithium ion batteries. The excellent electrochemical performance of GSC nanocomposites could be ascribed to the homogeneous and continuous S-doped carbon matrix, which provides shortened ion diffusion pathway, increased electrical conductivity, enhanced structural stability, and introduced surface/interface property.     

Cost‐Effective Biomass Carbon/Calix[4]Quinone Composites for Lithium Ion Batteries

Searching for new cheap encapsulating materials to decrease the solubility of organic small molecules as the cathode materials in electrolytes and improve the performance of organic lithium‐ion batteries (LIBs) is very important and highly desirable. In this research, we found that a novel cheap biomass carbon (named as PPL), prepared by pyrolyzing calyxes of Physalis Peruviana L, can efficiently encapsulate calix[4]quinone to form composites, which can be used as cathodes in LIBs. The initial discharge capacity of the as‐fabricated battery was 437 mAh g^?1 and could maintain 228 mAh g^?1 after 100 cycles. Even at 1 C, the discharge capacity was still 217 mAh g^?1.     

Constructing oxygen-deficient V2O3@C nanospheres for high performance potassium ion batteries

Potassium ion batteries (PIBs) have been regarded as promising alternatives to lithium ion batteries (LIBs) on account of their abundant resource and low cost in large scale energy storage applications. However, it still remains great challenges to explore suitable electrode materials that can reversibly accommodate large size of potassium ions. Here, we construct oxygen-deficient V₂O₃ nanoparticles encapsulated in amorphous carbon shell (O_d-V₂O₃@C) as anode materials for PIBs by subtly combining the strategies of morphology and deficiency engineering. The MOF derived nanostructure along with uniform carbon coating layer can not only enables fast K⁺ migration and charge transfer kinetics, but also accommodate volume change and maintain structural stability. Besides, the introduction of oxygen deficiency intrinsically tunes the electronic structure of materials according to DFT calculation, and thus lead to improved electrochemical performance. When utilized as anode for PIBs, O_d-V₂O₃@C electrode exhibits superior rate capability (reversible capacities of 262.8, 227.8, 201.5, 179.8, 156.9 mAh/g at 100, 200, 500, 1000 and 2000 mA/g, respectively), and ultralong cycle life (127.4 mAh/g after 1000 cycles at 2 A/g). This study demonstrates a feasible way to realize high performance PIBs through morphology and deficiency engineering.     

Hierarchical Nanotubes Constructed by Co9S8/MoS2 Ultrathin Nanosheets Wrapped with Reduced Graphene Oxide for Advanced Lithium Storage

Nanostructured hybrid metal sulfides have attracted intensive attention due to their fascinating properties that are unattainable by the single‐phased counterpart. Herein, we report an efficient approach to construct cobalt sulfide/molybdenum disulfide (Co₉S₈/MoS₂) wrapped with reduced graphene oxide (rGO). The unique structures constructed by ultrathin nanosheets and synergetic effects benefitting from bimetallic sulfides provide improved lithium ions reaction kinetics, and they retain good structural integrity. Interestingly, the conductive rGO can facilitate electron transfer, increase the electronic conductivity and accommodate the strain during cycling. When evaluated as anode materials for lithium‐ion batteries (LIBs), the resultant reduced graphene oxide‐coated cobalt sulfide/molybdenum disulfide (Co₉S₈/MoS₂@rGO) nanotubes deliver high specific capacities of 1140, 948, 897, 852, 820, 798 and 784 mAh g^?1 at the various discharging current densities of 0.2, 0.5, 1, 2, 3, 4 and 5 A g^?1, respectively. In addition, they can maintain an excellent cycle stability with a discharge capacity of 807 mAh g^?1 at 0.2 A g^?1 after 70 cycles, 787 mAh g^?1 at 1 A g^?1 after 180 cycles and 541 mAh g^?1 at 2 A g^?1 after 200 cycles. The proposed method may offer fundamental understanding for the rational design of other hybrid functional composites with high Li‐storage properties.     

Synthesis and properties of a lithium-organic coordination compound as lithium-inserted material for lithium ion batteries

A lithium-organic coordination compound based on an aromatic carbonyl derivative, [Li₂(C₁₄H₆O₄)], was synthesized by the dehydration of [Li₂(C₁₄H₆O₄)·H₂O], and used as a novel lithium-inserted material for lithium ion batteries. The synthesized material has initial discharge capacity of 126 and 115 mAh/g at current densities of 22 and 111 mAh/g, corresponding to the columbic efficiency of 99.2% and 98.3% at the first cycle, and its capacity fading is only 5% and 13% after 50 cycles, respectively, showing that this compound is a promising candidate as lithium-inserted material for lithium ion batteries.     

Amorphous Selenium and Crystalline Selenium Nanorods Graphene Composites as Cathode Materials for All-Solid-State Lithium Selenium Batteries

Selenium (Se) is an element in the same main group as sulfur and is characterized by high electrical conductivity and large capacity (675 mAh g⁻¹). Herein, a novel ultra-high dispersion amorphous selenium graphene composite (a-Se/rGO) was synthesized and a selenium nanorods graphene composite (b-Se/rGO) was prepared by hydrothermal method as the cathode material for all solid-state lithium−selenium (Li−Se) batteries, hoping to improve the efficiency and utilization rate of active substances in all solid-state batteries. The all-solid-state batteries were assembled using a heated thawing electrolyte (2LiIHPN−LiI; HPN=3-hydroxypropionitrile). The utilization rate of a-Se/rGO was 103 % and the capacity was 697 mAh g⁻¹, which remained at 281 mAh g⁻¹ (41.6 % of the 675 mAh g⁻¹) after 30 cycles under 0.5 C. Notably, a-Se/rGO showed excellent performance concerning its utilization rate, with a capacity of up to 610 mAh g⁻¹ at 2 C, due to the high availability of amorphous Se and the special properties of the electrolytes. However, in the charge and discharge cycles, the second discharge capacity of a-Se/rGO was more significantly attenuated than that of the first discharge due to the formation of larger crystals of selenium during the charging process. The battery assembled using b-Se/rGO maintained a capacity of 270.58 mAh g⁻¹ after 30 cycles (the retention rate of discharge capacity was 66.13 % compared with that in the first cycle). Through TEM and other relevant tests, it is speculated that amorphous selenium is conducive to capacity release, which, however, is affected by the formation of crystalline selenium after the first charge process.     

Enhanced Performance of a Lithium–Sulfur Battery Using a Carbonate‐Based Electrolyte

The lithium–sulfur battery is regarded as one of the most promising candidates for lithium–metal batteries with high energy density. However, dendrite Li formation and low cycle efficiency of the Li anode as well as unstable sulfur based cathode still hinder its practical application. Herein a novel electrolyte (1 m LiODFB/EC‐DMC‐FEC) is designed not only to address the above problems of Li anode but also to match sulfur cathode perfectly, leading to extraordinary electrochemical performances. Using this electrolyte, lithium|lithium cells can cycle stably for above 2000 hours and the average Coulumbic efficiency reaches 98.8 %. Moreover, the Li–S battery delivers a reversible capacity of about 1400 mAh g^?1_sulfur with retention of 89 % for 1100 cycles at 1 C, and a capacity above 1100 mAh g^?1_sulfur at 10 C. The more advantages of this cell system are its outstanding cycle stability at 60 °C and no self‐discharge phenomena.     

Sol–gel processing and electrochemical characterization of monoclinic Li3FeF6

To find new cathode materials for future applications in lithium-ion batteries, lithium transition metal fluorides represent an interesting class of materials. In principle the Li intercalation voltage can be increased by replacing oxygen in the cathode host structure with the more electronegative fluorine. A facile pyrolytic sol–gel process with trifluoroacetic acid as fluorine source was established to synthesize monoclinic Li₃FeF₆ using nontoxic chemicals. The acicular Li₃FeF₆ powder was characterized with X-ray diffraction and a detailed structure model was calculated by Rietveld analysis. For the preparation of cathode films to cycle versus lithium monoclinic Li₃FeF₆ was ball milled with carbon and binder down to nanoscale. After 100 cycles galvanostatic cycling (C/20) 47 % fully reversible capacity of the initial capacity (129 mAh/g) could be retained. To the best of our knowledge the results presented in this work include the first rate performance test for monoclinic Li₃FeF₆ up to 1 C maintaining a capacity of 71 mAh/g. The redox reaction involving Fe³⁺/Fe²⁺ during Li insertion/extraction was confirmed by post-mortem XPS and cyclic voltammetry.     

Talcum-doped composite separator with superior wettability and heatproof properties for high-rate lithium metal batteries

Separator is supposed to own outstanding thermal stability, superior wettability and electrolyte uptake,which is essential for developing high-rate and safe lithium metal batteries(LMBs). However, commercial polyolefin separators possess poor wettability and limited electrolyte uptake. For addressing this issue, we put forward a composite separator to implement above functions by doping layered-silicate(talcum) into polyvinylidene fluoride(PVDF). With significant improvement of electrolyte absor...     

Amorphous Ni-Co-S nanocages assembled with nanosheet arrays as cathode for high-performance zinc ion battery

The selection and development of cathode of alkaline zinc batteries （AZBs） is still hindered and often leads to poor rate capability and short cycle life. Here, amorphous hollow nickel-cobalt-based sulfides nanocages with nanosheet arrays （AM-NCS） are designed and constructed with ZIF-67 as the selftemplate to exchange with Ni²⁺and S^2-by using a two-step ion exchange method. The synthesized AM-NCS possess the high specific capacity （160 m Ah/g at 2 A/g）, and the assembled b...     

Carbonyl-rich Poly(pyrene-4,5,9,10-tetraone Sulfide) as Anode Materials for High-Performance Li and Na-Ion Batteries

Organic carbonyl electrode materials are widely employed for alkali metal-ion secondary batteries in terms of their sustainability, structure designability and abundant resources. As a typical redox-active organic electrode materials, pyrene-4, 5, 9, 10-tetraone (PT) shows high theoretical capacity due to the rich carbonyl active sites. But its electrochemical behavior in secondary batteries still needs further exploration. Herein, PT-based linear polymers (PPTS) is synthesized with thioether bond as bridging group and then employed as an anode material for lithium-ion batteries (LIBs) and sodium-ion batteries (SIBs). As expected, PPTS shows improved conductivity and insolubility in the non-aqueous electrolyte. When used as an anode material for LIBs, PPTS delivers a high reversible specific capacity of 697.1 mAh g⁻¹ at 0.1 A g⁻¹ and good rate performance (335.4 mAh g⁻¹ at 1 A g⁻¹). Moreover, a reversible specific capacity of 205.2 mAh g⁻¹ at 0.05 A g⁻¹ could be obtained as an anode material for SIBs.     

Tea-derived carbon materials as anode for high-performance sodium ion batteries

Sodium-ion batteries (SIB) have attracted widespread attention in large-scale energy storage fields owing to the abundant reserve in the earth and similar properties of sodium to lithium. Biomass-based carbon materials with low-cost, controllable structure, simple processing technology, and environmental friendliness tick almost all the right boxes as one of the promising anode materials for SIB. Herein, we present a simple novel strategy involving tea tomenta biomass-derived carbon anode with enhanced interlayer carbon distance (0.44 nm) and high performance, which is constructed by N,P co-doped hard carbon (Tea-1100-NP) derived from tea tomenta. The prepared Tea-1100-NP composite could deliver a high reversible capacity (326.1 mAh/g at 28 mA/g), high initial coulombic efficiency (ICE = 90% at 28 mA/g), stable cycle life (262.4 mAh/g at 280 mA/g for 100 cycles), and superior rate performance (224.5 mAh/g at 1400 mA/g). Experimental results show that the excellent electrochemical performance of Tea-1100-NP due to the high number of active N,P-containing groups, and disordered amorphous structures provide ample active sites and increase the conductivity, meanwhile, large amounts of microporous shorten the Na⁺ diffusion distance as well as quicken ion transport. This work provides a new type of N,P co-doped high-performance tomenta-derived carbon, which may also greatly promote the commercial application of SIB.     

Orthorhombic γ-LiV2O5 as Cathode Materials in Lithium Ion Batteries: Synthesis and Property

The rod-like and bundle-like γ-LiV₂O₅ were synthesized via a simple solvothermal process-ing. The rod-like γ-LiV₂O₅ with diameter of 500-800 nm and the bundle-like architectures are composed of several of order-attached rods with diameter of 100-600 nm. γ-LiV₂O₅ were synthesized using LiOH·H₂O, NH₄VO₃, HNO₃, C₂H₅OH without and with PVP as raw materials. At the same time, the actual formation mechanism of γ-LiV₂O₅ was also investigated. As the cathode materials for lithium ion batteries, the bundle-like γ-LiV₂O₅ prepared with PVP delivers a better electrochemical performance, which has an initial dis-charge capacity of 269.3 mAh/g at a current density of 30 mA/g and is still able to achieve 228 mAh/g after the 20th cycle. The good electrochemical properties of the as-synthesized γ-LiV₂O₅ coupled with the simple, relatively low temperature, and low cost of the prepara-tion method may make this material a promising candidate as a cathode material for lithium ion batteries.     

Continuous supercritical hydrothermal synthesis: lithium secondary ion battery applications

Nanosized lithium iron phosphate (LiFePO₄) and transition metal oxide (MO, where M is Cu, Ni, Mn, Co, and Fe) particles are synthesized continuously in supercritical water at 25?C30?MPa and 400??C under various conditions for active material application in lithium secondary ion batteries. The properties of the nanoparticles, including crystallinity, particle size, surface area, and electrochemical performance, are characterized in detail. The discharge capacity of LiFePO₄ was enhanced up to 140?mAh/g using a simple carbon coating method. The LiFePO₄ particles prepared using supercritical hydrothermal synthesis (SHS) deliver the reversible and stable capacity at a current density of 0.1?C rate during ten cycles. The initial discharge capacity of the MO is in the range of 800?C1,100?mAh/g, values much higher than that of graphite. However, rapid capacity fading is observed after the first few cycles. The continuous SHS can be a promising method to produce nanosized cathode and anode materials.