多层膜闪耀光栅衍射的运动学研究

用 X射线运动学理论对软 X射线多层膜闪耀光栅的衍射特性进行了详细的研究 ,得到了衍射规律的一般表达式 ,讨论了产生衍射极大值的条件、光谱特性 ,不同于光栅和多层膜的色散特性。以及用作软 X射线单色器的一般性问题。发现只要选择合适的光栅参数 ,便可以将衍射光的大部分能量集中到某一个非零衍射级上。     

Blazing of smooth gratings

The diffraction efficiency of smooth weak gratings can depend significantly on the profile of the gratings as, in the diffraction process there exists wave coupling. By adjusting the grating profile it is possible to obtain enhancement or suppression of the diffraction efficiency. Possible applications include improvements in grating devices, grating profile reconstruction, and precise control of the slightest periodical disturbances. Some numerical examples are given.     

一种设计环形汇聚光栅反射镜的新方法

提出了一种利用数学变换来快速设计环形汇聚光栅反射镜的方法.通过分析具体的物理场景,抽象出已有条形汇聚光栅的"线"汇聚特性与所要设计的"点"汇聚特性在数学上对应的变换关系,然后用该数学变换对条形汇聚光栅进行外形上的变换,外形变换后的条形光栅即为可以实现"点"汇聚的环形光栅.用有限元算法对设计的环形汇聚光栅进行仿真,仿真证明采用该方法设计的环形光栅可以很好地实现高反、高汇聚.采用这一方法,设计了直径为29.788μm的环形光栅反射镜,当垂直入射的径向偏振光从设计的环形光栅表面反射回来后将发生汇聚,汇聚焦点位于环形光栅表面10μm处.经计算,反射镜的数值孔径为0.8302,反射率为0.9163,在焦点所在的汇聚面上,汇聚光栅电场分布的半高宽为1.5548μm.     

刻线误差与面型误差对平面光栅光谱性能影响的二维快速傅里叶变换分析方法

光栅刻线误差与基底面型误差影响平面光栅衍射波前、分辨本领、鬼线、卫线及杂散光等光谱性能,研究光栅性能指标与光栅刻线误差及基底加工误差之间的因果关系,对提高光栅质量极为重要。根据光栅衍射中产生的源于刻线误差与面型误差的光程差,推导出了在光栅锥面衍射情况下的光栅刻线误差、基底面型误差、入射角θ、衍射级次m与衍射波前关系的数学表达式,得到构建非理想光栅衍射波前的理论模型。以理论模型为依据,采用干涉仪测量光栅对称级次衍射波前,实现在测量结果中对光栅刻线误差与基底面型误差的分离,并基于二维快速傅里叶变换分析光栅衍射波前,考察了刻线误差与面型误差对光栅性能指标的影响。借助此方法通过重构的光栅衍射波前,分析光栅分辨本领、鬼线等光谱性能,还可以反演光栅全表面刻线误差与面型误差的大小,为光栅基底加工、光栅制造和使用技术提供理论依据。     

A detailed study of metallic surface-relief grating

This paper presents a more detailed interaction of an electromagnetics light with a metallic surface-relief subwavelength grating utilizing the rigorous coupled-wave analysis. The focus of this work is the accurate modeling of undetermined aspects of diffraction patterns produced by binary metallic grating structures, specially gold grating. First-order diffraction efficiency for rectangular-groove gold grating with equal groove and ridge widths are presented for various wavelengths as a function of period, groove depth, polarization and angle of incidence. We also studied diffraction efficiency of both of TE and TM polarization modes against increasing of incident angle as well as TE polarization against increment of grating period. As a result, very low reflectivity at zero-order was found out for TE and TM polarizations at the pitch of Λ = 2λ. Having been studied diffraction efficiency of metallic surface-relief gratings, we also examined polarization-dependent efficiency of diffraction orders, for different groove depths. Simulation results have been completely presented.     

利用双光栅的多普勒频移测速度

衍射光的多普勒频移是与光栅运动速度有关的量.激光束依次通过动光栅、静光栅衍射,然后使1对光频不同、彼此平行又能部分重叠的衍射光束通过硅光电池进行光电转换,得到的信号电流的频率等于多普勒频移.信号电流经I/V转换、f/V转换和A/D转换后,由单片机测出电压,由此就可以确定动光栅的运动速度.最后对利用双光栅的多普勒频移测气垫导轨上滑块的速度进行分析和讨论.     

超短脉冲激光光束被局域体全息光栅衍射的性质分析

利用二维耦合波理论,分析了超短脉冲激光光束被完全重叠型的局域体全息光栅衍射的时空变化性质,给出了衍射和透射脉冲激光光束沿光栅出射边界的强度时空分布。以LiNbO3晶体为例,数值研究了衍射光脉冲强度沿光栅出射边界的分布和脉冲波形的变化及光栅的总衍射效率受光栅二维尺寸、入射角度、光栅折射率调制度及入射脉冲的脉冲时域半峰全宽等条件的影响而变化的情况。与一维体全息光栅对超短脉冲激光光束衍射的性质,及此光栅对连续光衍射的性质作比较,给出了合理选择光栅参量及入射条件以在光栅出射边界上得到总衍射效率较大且分布较均匀的衍射光脉冲的方法。     

闪耀光栅的傅里叶分析

用傅里叶光学来解决周期性结构的衍射问题既准确方便又容易理解。从研究透射闪耀光栅的透射函数及反射闪耀光栅的反射函数出发 ,利用傅里叶光学原理 ,从理论上分析了闪耀光栅衍射图样的复振幅和光强分布与闪耀角及波长的关系 ,并利用计算机进行了模拟计算。计算的效率曲线与实际刻划的闪耀光栅效率曲线吻合的很好。     

矩阵光学与单双光栅成象研究

本文首次用矩阵光学理论结合光栅衍射相干条件,推出双光栅成象的几何光学表示式,用象位移叠加的观点解释了双光栅成象系统Talbot自成象以及双光栅成象现象,首次将双光栅成象现象分为1)基于光栅和透镜组成系统对第一块光栅进行成象的双光栅成象和2)基于编码光源成象原理的双光栅成象,指出这是两种截然不同的双光栅成象,扩展了双光栅成象的物理意义。最后给出了实验结果。     

Variable Wavelengths Fiber Bragg Gratings Written with A Phase Mask and Four Prisms

Using only one diffractive element, the Talbot interferometer provides a robust and inherently stable method for reproducing fiber Bragg gratings with variable wavelengths, and reduces the complexity of the fiber grating fabrication system. However, the usable length of the grating is limited by the practical length of the mirrors. This paper presents a phase mask with two fixed prisms and two rotational prisms to inscribe fiber Bragg gratings with variable Bragg wavelengths. In this system, the fiber Bragg grating is inscribed by UV interference stripes of 193 nm derived from two rotational prisms and two fixed prisms, where phase mask is used as a beam splitter of ±1 order diffraction light. It is noteworthy that the tunable phase mask interferometer decreases the demand of the length of prism evidently.     

Anisotropic surface relief diffraction gratings under arbitrary plane wave incidence

A modal method is used for the analysis under oblique incidence of a diffraction grating made of anisotropic material. The problem is studied viewing the structure as the cascade of junctions between periodic arrays of anisotropic slab waveguides with the same period and different heights. This diffraction problem is formulated in terms of an integral equation that enforces the continuity of the transverse magnetic field at the junction. The unknown is the transverse electric field at the junction. It is possible to use also another formulation, where the role of the two fields is exchanged. The kernels of these equations are the relevant Green's functions, which are expressed in terms of eigenfunction expansions. The determination of the modes of the various regions composed of arrays of anisotropic dielectric slabs has been carried out by the method of spectral elements, whereby the field components are represented in a polynomial basis and the original differential eigenvalue problem is converted into an algebraic one. The integral equation is solved numerically by the method of moments and each junction is characterized by its generalized scattering matrix (GSM). Finally, the diffraction efficiencies of the grating are obtained by combining the various GSM's.     

Design of high-efficiency diffraction gratings based on total internal reflection for pulse compressor

We present designs of high-efficiency compression grating based on total internal reflection (TIR) for picosecond pulse laser at 1053 nm. The setup is devised by directly etching gratings into the bottom side of a prism so that light can successfully enter (or exit) the compression grating. Dependence of the −1 order diffraction efficiencies on the constructive parameters is analyzed for TE- and TM-polarized incident light at Littrow angle by using Fourier modal method in order to obtain optimal grating structure. The electric field enhancement within the high-efficiency TIR gratings is regarded as another criterion to optimize the structure of the TIR gratings. With the criterion of high diffraction efficiency, low electric field enhancement and sufficient manufacturing latitude, TIR compression gratings with optimized constructive parameters are obtained for TE- and TM-polarized incident light, respectively. The grating for TE-polarized light exhibits diffraction efficiencies higher than 0.95 within 23 nm bandwidth and relatively low square of electric field enhancement ratio of 5.7. Regardless of the internal electric field enhancement, the grating for TM-polarized light provides diffraction efficiencies higher than 0.95 within 42 nm bandwidth. With compact structure, such TIR compression gratings made solely of fused silica should be of great interest for application to chirped pulse amplification (CPA) systems.     

多层介质膜脉冲压缩光栅近场光学特性分析

利用傅里叶模式理论分析了TE波自准直角入射的使用条件下，多层介质膜光栅的光栅区和多层膜区电场分布的特点.分别讨论了HfO₂和SiO₂为顶层光栅材料时，光栅结构参数对光栅脊峰值电场的影响，结果表明，对于不同膜厚的顶层材料，存在一个最佳膜厚度，使光栅脊峰值电场最小，并且当膜厚增大时，设计大高宽比的光栅可以降低该电场峰值.最后，在大角度条件下使用多层膜光栅也可以降低光栅脊处的峰值电场. 关键词： 衍射光学 多层介质膜光栅 模式理论 损伤阈值     

Use of steel substrates in diffractive optics: Near field of high surface quality steel tape gratings

Steel tape is used in optical applications due to its mechanical properties. However, roughness of steel surfaces affects to wave propagation. The effect can be observed using diffraction gratings with low periods. In such a case, self-images of the grating appear at certain periodic distances from the grating (Talbot planes). When standard steel is used, the contrast of Talbot self-images strongly decreases with the distance from the grating. In this work, we prove that controlling the surface quality of steel, it is possible to improve its optical behavior and, as a consequence, high quality surface steel represents a good choice for diffractive optics when the use of chrome-on-glass masks is not indicated. As an example, we have manufactured a diffraction grating over a high quality steel surface by means of an ablation process with a nanosecond pulsed laser. The contrast of the self-images for these gratings decreases very slowly with the distance, in comparison with the self-images obtained with standard steel tape gratings.     

多层介质膜脉宽压缩光栅的严格矢量分析

用于展宽和压缩激光脉冲的多层膜脉宽压缩光栅是由多层介质高反膜和位于其顶层的浮雕光栅构成。以设计的高反射多层膜为基础,利用傅里叶模式理论分析了其衍射场分布,给出了TE波自准直角入射的使用条件下,多层介质膜脉宽压缩光栅衍射效率的表达式。以-1级衍射效率为评价函数,分别讨论了HfO2和SiO2为顶层材料时,多层膜脉宽压缩光栅-1级衍射效率高于0.95的光栅结构参量范围。结果表明,在该条件下,选择HfO2为顶层材料时,光栅结构参量有较大的取值范围。给出了优化的光栅结构参量,并分析了光栅制作误差及其使用条件的宽容度,对光栅制作工艺和使用具有一定的指导意义。     

Variable Wavelengths Fiber Bragg Gratings Written with A Phase Mask and Four Prisms

1　Ｉｎｔｒｏｄｕｃｔｉｏｎ　　Ｓｉｎｃｅｔｈｅｆｉｂｅｒｗａｓｐｌａｃｅｄｄｉｒｅｃｔｌｙｂｅｈｉｎｄｔｈｅ ｐｈａｓｅｍａｓｋ ,ｗｈｉｃｈｗａｓｏｒｉｇｉｎａｌｌｙｄｅｍｏｎｓｔｒａｔｅｄｂｙＫ .Ｏ .Ｈｉｌｌｅｔａｌ.ｉｎ 1 993[1] ,ｔｈｉｓｍｅｔｈｏｄｈａｓｂｅｅｎｕｓｅｄｗｉｄｅｌｙｆｏｒｗｒｉｔｉｎｇｆｉｂｅｒＢｒａｇｇ ｇｒａｔｉｎｇ .Ｈｏｗｅｖｅｒ ,ｔｈｅｃｏｎｔａｃｔｔｅｃｈｎｉｑｕｅｏｆｐｈａｓｅｍａｓｋｃａｎｏｎｌｙｉｎｓｃｒｉｂｅｔｈｅｆｉｂｅｒＢｒａｇｇ ｇｒａｔｉｎｇｗｉｔｈ…     

Optical differentiation of displacement patterns using double diffraction and spatial filtering

A simple technique of optical differentiation of displacement patterns is proposed. It utilizes a single copy of a distorted diffraction grating and a plane mirror. The principle of operation, together with experimental results and the comparison with previously described differentiation methods are given.     

Single order soft X-ray diffraction with quasi-random radius pinhole array spectroscopic photon sieves

A novel single order diffraction grating in the soft X-ray region, called quasi-random radius pinhole array spectro- scopic photon sieves （QRSPS）, is proposed in this paper. This new grating is composed of pinholes on a substrate, whose radii are quasi-random, while their centers are regular. Analysis proves that its transmittance function across the grating bar is similar to that of sinusoidal transmission gratings. Simulation results show that the QRSPS can suppress higher-order diffraction effectively. And the QRSPS would still retain its characteristic of single order diffraction when we take the effect of X-ray penetration into account. These properties indicate that the QRSPS can be used in the soft X-ray spectra measurement.     

Unveiling Talbot Effect under Fresnel Diffraction at a Fork-Shaped Grating

The near-field effect of diffraction image self-reproduction or self-imaging of a periodic grating illuminated by quasi-monochromatic wave is well-known as the Talbot effect. Introducing a dislocation to a periodic structure provides a fork-shaped modulation of the phase/amplitude, which produces discrete diffraction pattern in a far-field consisting of optical vortices. In this paper, Fresnel diffraction at amplitude fork-shaped grating is theoretically and experimentally studied. The coexistence of spatial ordering and local violation of translational symmetry of the structure manifests itself in a strict diffraction pattern consisting of optical vortices in the far-field, which is shown to be accompanied by formation of a spatially ordered intensity distribution in the near-field, reminiscent the Talbot carpets for periodic structures. These results demonstrate the first evidence of Talbot effect occurred under light diffraction at fork-shaped gratings, being promising for deep understanding of near-field singular optics phenomena.     

Sinc切趾布拉格光栅谱合成特性

 谱合成是获得高功率激光输出的有效方法。反射布拉格光栅衍射旁瓣是影响谱合成效率的主要因素。建立了sinc切趾布拉格光栅谱合成理论模型,采用传输矩阵法,分析了光栅参数对切趾光栅衍射特性的影响,以及入射光束光谱宽度和发散角对谱合成效率的影响。计算结果表明：sinc切趾布拉格光栅可有效抑制衍射旁瓣的影响,其一级衍射旁瓣和二级衍射旁瓣的峰值分别由62%和36%下降为0.57%和0.12%。通过优化光栅参数,利用sinc切趾布拉格光栅可实现窄光谱间距、高谱合成效率的多光束谱合成。切趾后,在10 nm的带宽内,参与谱合成光束的数目由7束增加为25束。对于波长为1 064 nm和1 064.4 nm的两束光谱合成,当入射光束光谱宽度小于0.15 nm,且发散角小于0.8 mrad时,谱合成效率达90%以上。