Mechanism and kinetics of the reaction of ozone with sodium chloride in aqueous solutions

It is shown experimentally that Cl⁻ appreciably accelerates ozone decomposition in water (τ_1/2 = 1.5 h versus 6 h in pure water). The decomposition of ozone in NaCl solutions includes the reversible reaction of ozone with the chloride ion (O₃ + Cl⁻ → O₃⁻ + Cl) as the key step, which is followed by the development of a chain reaction in which chain propagation is performed alternately by the chlorine atom Cl and its monoxide ClO. The current concentrations of the chlorine atom are rather low ([Cl] ∼ 10⁻¹⁴ mol/l). The overall process is satisfactorily described by a first-order rate law with respect to ozone. The decomposition of ozone in aqueous solutions of NaCl is not accompanied by the formation of products other than oxygen. In particular, no noticeable amounts of hypochlorites and chlorates are observed. This is particularly significant for medicinal applications of ozonized isotonic solutions.     

Primary stage of the reaction between ozone and chloride ions in aqueous solution: Oxidation of chloride ions with ozone through the mechanism of oxygen atom transfer

Relying on experimental data on products and the kinetic features of the complex reaction between O₃ and Cl⁻(aq), we establish that the primary stage of the reaction proceeds via a mechanism in which an oxygen atom is transferred from an ozone molecule to a chloride ion. Analyzing the thermodynamic parameters of the primary stage, we conclude that a long-lived intermediate complex of a chloride ion and ozone is initially formed. The mechanism of acid catalysis in the reaction between O₃ and Cl⁻(aq) is described as the formation of a protonated intermediate complex, HO₃Cl, in the acidic medium and its rapid decomposition toward the formation of products.     

Catecholase biomimetic catalytic activity of copper(II) complexes with 2-methyl-3-amino-(3H)-quinazolin-4-one

The oxidation of catechol by molecular oxygen in the presence of a catalytic amount of copper(II) complex with 2-methyl-3-amino-(3H)quinazoline-4-one (MAQ) and various anions (Cl⁻, Br⁻, ClO ₄ ⁻ , SCN⁻, NO ₃ ⁻ and SO ₄ ^– ) was studied. The catecholase biomimetic catalytic activity of the copper(II) complexes has been determined spectrophotometrically by monitoring the oxidative transformation of catechol to the corresponding light absorbing o-quinone (Q). The rate of the catalytic oxidation reaction was investigated and correlated with the catalyst structure, time, concentration of catalyst and substrate and finally solvent effects. Addition of pyridine or Et₃N showed a dramatic effect on the rate of oxidation reaction. Kinetic investigations demonstrate that the rate of oxidation reaction has a first order dependence with respect to the catalyst and catechol concentration and obeying Michaelis–Menten Kinetics. It was shown that the catalytic activity depends on the coordination environment of the catalyst created by the nature of counter anions bound to copper(II) ion in the complex molecule and follows the order: Cl⁻ > NO ₃ ⁻ > Br⁻ > SO ₄ ^– > SCN⁻ > ClO ₄ ⁻ . To further elucidate the catalytic activity of the complexes, their electrochemical properties were investigated and the catecholase mimetic activity has been correlated with the redox potential of the Cu²⁺/Cu⁺ couple in the complexes.     

Molecular dynamics calculation of spectral characteristics of water clusters in the presence of ozone molecules and chlorine ions

Simultaneous interaction of the (H₂O)₅₀ cluster with O₃ molecules and Cl⁻ ions was studied by the molecular dynamics method. Six O₃ molecules located near the cluster were absorbed by the aqueous aggregate, and Cl⁻ ions in turn left the zone of the interaction with the cluster. Some of Cl⁻ ions penetrated inside the formed (O₃)₆(H₂O)₅₀ cluster and come into collision with O₃ molecules that split the ozone molecule into atoms. When Cl⁻ ions were removed sufficiently far away from the cluster, the water cluster with absorbed O₃ molecules and O atoms was observed for 15.6 ps. The interaction of water molecules with Cl⁻ ions gives rise to an increase in the integral intensity of absorption and emission IR spectra, and also to an essential decrease in the analogous characteristics of the Raman spectrum in the frequency range of 0 ≤ ω ≤ 1000 cm⁻¹. The presence of Cl⁻ ions did not affect essentially the location of the main band in the IR spectra, but considerably changed the shape of the bands in the Raman spectrum.     

The Peltier heat and the standard electrode potential of ferro-ferricyanide couple at 298.15 K determined by electrochemical–calorimetry

An experiment was done on electrochemical–calorimetry to identify the Peltier heats of the ferro-ferricyanide reversible electrode reaction over the concentration range of 0.075–0.3 mol dm⁻³ at 298.15 K. A new approach has been developed to obtain the standard potential of this electrode, which was identified as (+0.3580 ± 0.0030) volt at 298.15 K and compared with previously reported values. An equation derived from the approach is also applied to several standard couples, such as Fe(CN)₆⁻³/Fe(CN)₆⁻⁴, H⁺/H₂, Cu²⁺/Cu, Cl⁻/Hg₂Cl₂,Hg, Fe³⁺/Fe²⁺, and Cl⁻/Cl₂ to determine their respective reaction heats with satisfying results.     

Multisyringe flow injection analysis hyphenated with liquid core waveguides for the development of cleaner spectroscopic analytical methods: improved determination of chloride in waters

In this work, the hyphenation of the multisyringe flow injection analysis technique with a 100-cm-long pathlength liquid core waveguide has been accomplished. The Cl⁻/Hg(SCN)₂/Fe³⁺ reaction system for the spectrophotometric determination of chloride (Cl⁻) in waters was used as chemical model. As a result, this classic analytical methodology has been improved, minimizing dramatically the consumption of reagents, in particular, that of the highly biotoxic chemical Hg(SCN)₂. The proposed method features a linear dynamic range composed of two steps between (1) 0.2–2 and (2) 2–8 mg Cl⁻ L⁻¹, thus extended applicability due to on-line sample dilution (up to 400 mg Cl⁻ L⁻¹). It also presents improved limits of detection and quantification of 0.06 and 0.20 mg Cl⁻ L⁻¹, respectively. The coefficient of variation and the injection throughput were 1.3% (n = 10, 2 mg Cl⁻ L⁻¹) and 21 h⁻¹. Furthermore, a very low consumption of reagents per Cl⁻ determination of 0.2 μg Hg(II) and 28 μg Fe³⁺ has been achieved. The method was successfully applied to the determination of Cl⁻ in different types of water samples. Finally, the proposed system is critically compared from a green analytical chemistry point of view against other flow systems for the same purpose.     

Study on ion exchange equilibrium for some uni-univalent and uni-divalent reaction systems using strongly basic anion-exchange resin Duolite A-113

The study on thermodynamics of ion exchange equilibrium for uni-univalent Cl⁻/I⁻, Cl⁻/Br⁻, and uni-divalent Cl⁻/SO₄²⁻, Cl⁻/C₂O₄²⁻ reaction systems was carried out using ion-exchange resin Duolite A-113. The equilibrium constant K was calculated by taking into account the activity coefficient of ions both in solution as well as in the resin phase. The K values calculated for uni-univalent and uni-divalent anion exchange reaction systems were observed to increase with rise in temperature, indicating the endothermic exchange reactions having enthalpy values of 17.21, 36.60, 19.50, 18.43 kJ/mol respectively.     

A study of ion exchange equilibrium for some uni-univalent and uni-divalent reaction systems using strongly basic anion exchange resin Indion-830 (Type 1)

A study of the thermodynamics of ion exchange equilibrium for uni-univalent Cl⁻/I⁻, Cl⁻/Br⁻ and uni-divalent Cl⁻/SO ₄ ²⁻ , Cl⁻/C₂O ₄ ²⁻ reaction systems was carried out using ion exchange resin Indion-830 (Type 1). The equilibrium constant K was calculated by taking into account the activity coefficients of ions both in solution and in the resin phase. For uni-univalent ion exchange reaction systems, the equilibrium constants K′ were also calculated from the mole fraction of ions in the resin phase. The K values calculated for uni-univalent and uni-divalent anion exchange reaction systems increased as the temperature grew, indicating the endothermic character of the exchange reactions with enthalpies of 38.2, 32.3, 7.6, and 11.4 kJ/mol, respectively. The article is published in the original.     

Effect of Anion Doping on the Thermal Decomposition of Potassium Bromate

Structural defects were introduced into the potassium bromate (PB) lattice in the form of SO²⁻ ₄ and Cl⁻ ions in the process of crystal growth. It was assumed that these doped crystals PB(Cl⁻) and PB(SO²⁻ ₄) are composed of a two phase system, one being the perfect PB lattice and the other distorted regions due to induced defects. Isothermal decomposition of doped and normal PB samples was carried out gasometrically between the temperature range 653–663 K. The α-t plots reveal that the process occurs through initial gas evolution, acceleratory and decay stages. It also confirmed that doping enhances the rate of the reaction, the effect being more pronounced in the case of PB(SO²⁻ ₄). The data are found to be well fitted to the Prout-Tompkins and Avrami-Erofe'ev mechanisms. This revised version was published online in July 2006 with corrections to the Cover Date.     

Fabrication of TiO2/Ti nanotube electrode and the photoelectrochemical behaviors in NaCl solutions

Titanium oxide nanotube electrodes were successfully prepared by anodic oxidation on pure Ti sheets in 0.5 wt.% NH₄F + 1 wt.% (NH₄)₂SO₄ + 90 wt.% glycerol mixed solutions. Nanotubes with diameter 40–60 nm and length 7.4 μm were observed by field emission scanning electron microscope. The electrochemical and photoelectrochemical characteristics of TiO₂ nanotube electrode were investigated using linear polarization and electrochemical impedance spectroscopy techniques. The open-circuit potential dropped markedly under irradiation and with the increase of Cl⁻ concentrations. A saturated photocurrent of approximately 1.3 mA cm⁻² was observed under 10-W low-mercury lamp irradiation in 0.1 M NaCl solution, which was much higher than film electrode. Meanwhile, the highest photocurrent in NaCl solution implied that the photogenerated holes preferred to combine with Cl⁻. Thus, a significant synergetic effect on active chlorine production was observed in photoelectrocatalytic processes. Furthermore, the generation efficiency for active chlorine was about two times that using TiO₂/Ti film electrode by sol–gel method. Finally, the effects of initial pH and Cl⁻ concentration were also discussed.     

New route to 1,1-difluoro-5-methylquasisilatrane

A new route to 1,1-difluoro-5-methylquasisilatrane (N→Si) F₂Si(OCH₂CH₂)₂NMe is elaborated: the reaction of chlorinated methyltrifluorosilanes F₃SiCH_3−n Cln (n = 1–3) as well as trifluoro(3-chloropropyl) silane and trifluoro(propenyl)silane with N-methyl-bis(2-hydroxyethyl)amine. The reactivity of the silanes F₃SiCH_3−n Cl _n increases with the number of chlorine atoms, that is, with the electronegativity of the CH_3−n Cl _n group.     

W3Cl10(Hg2Cl2)2, A Reactive One-Dimensional Polymer of Triangular Tritungsten Clusters with Terminal and Intercluster-Bridging Mercurous Chloride Ligands: Main Group Metal Halide By-Products as Versatile Ligands in Reductive Synthesis of Early Transition Metal Halide Clusters

Solid-state reduction of WCl₆ with Hg followed by incomplete sublimation of mercury chlorides generated the tritungsten decachloride—mercury chloride adducts W₃Cl₁₀(Hg₂Cl₂)_2−x(HgCl₂)_x. Thermal equilibration of the solid-state products followed by sublimation of HgCl₂ afforded single crystals that include the mercurous chloride adduct W₃Cl₁₀(Hg₂Cl₂)₂. Single-crystal diffractometry revealed a one-dimensional polymer of tritungsten decachloride triangular clusters with novel terminal and inter-cluster-bridging ClHgHgCl ligands. The W₃ cluster core has similar metrics to that of the benzyltriethylammonium salt of W₃(μ₃-Cl)(μ-Cl)₃Cl₉ ³⁻. W₃Cl₁₀(Hg₂Cl₂)₂ is the first reported adduct of the binary tungsten chloride W₃Cl₁₀. The ClHgHgCl ligands are more labile that the terminal chlorine atoms of W₃(μ₃-Cl)(μ-Cl)₃Cl₉ ³⁻. These results demonstrate diverse roles and potential utility of main group element halide by-product ligands in solid-state reductions of transition metal halides.     

Formation of iodine atoms in the heterogeneous reaction between chlorine and iodomethane

The rate constant of the reaction between iodomethane and chlorine atoms at 323 K, measured by the resonance florescence method under jet stream conditions as the iodine atom yield, is k ₁^I = (2.9±0.6) × 10⁻¹² cm³ molecule⁻¹ s⁻¹. It is demonstrated experimentally that this reaction takes place mainly on the reactor wall.     

Synthesis of N'-substituted amidines through the cleavage an oxadiazolone heterocycle by weakly basic nucleophiles. Effect of the nature of the nucleophile and of the nucleophile/substrate molar ratio

The reaction of 1-ethoxycarbonylmethyl-5,5,7,7-tetramethyl-2-oxo-tetrahydroimidazo[1,5-b]oxadiazol-6-oxyl with the weakly basic nucleophiles NaN₃, NaCN, KF, KBr, KCl and NaNO₂ has been studied. It was shown for the first time that, as in the case of NaOH and MeONa, the reaction occurs with opening of the oxadiazolone ring to form exo-N-substituted amidines. It was shown that the weakly basic nucleophiles readily react with substrates which contain a substituent sensitive to attack by such nucleophiles as NaOH or MeONa. The effect of the nature of the nucleophiles on the reaction course for opening of the oxadiazolone ring was also studied. It was found that the reactivity of the nucleophiles in DMSO changes in the series F⁻ > CN⁻ > N₃^– >NO₂⁻ > Cl⁻ > Br⁻ and qualitatively correlates with their basicities in this solvent. Examination of the effect of the ratio of the reagents on the degree of conversion of the starting oxadiazolone has shown that a quantity of nucleophiles less than one equivalent also allowed the cleavage reaction of the oxadiazolone heterocycle to go to completion through just increasing the reaction time. The experimental data obtained lends support to the proposed reaction scheme. Dedicated to Academician B. A. Trofimov in his 70^th jubilee. Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 1, pp. 71–78, January, 2009.     

Iron(III) complexes on the basis of azomethine derived from 4,4′-dodecyloxybenzoyloxybenzoyl-4-oxy-2-hydroxybenzaldehyde

This work deals with the synthesis and investigation of phase behavior of iron(III)-containing complexes of linear azomethine derived from 4,4′-dodecyloxybenzoyloxybenzoyl-4-oxy-2-hydroxybenzaldehyde with NO₃⁻, PF₆⁻, Cl⁻, and BF₄⁻ counterions. All semiproducts and target substances are characterized by TLC, elemental analysis, IR and NMR spectroscopy, and melting points. It is established that the reaction of Schiff base with metal salts at room temperature leads to the formation of complexes having presumably the linear structure. Phase behavior of the compounds obtained depending on the nature of counterion was studied.     

Pulse radiolysis study of I− oxidation with radical anions Cl2 ⋅− in an aqueous solution

Radiation-chemical transformations of chloride solutions in the presence of iodide additives were studied by pulse radiolysis. Radical anion Cl₂ ^⋅− oxidize I⁻ ion, while in the secondary reactions Cl₂ reacts with I⁻ to form a mixed trihalide ion ICl₂ ⁻. A reaction model that satisfactorily describes the experimental data was proposed. Published in Russian in Izvestiya Akademii Nauk. Seriya Khimicheskaya, No. 6, pp. 1336–1340, June, 2005.     

Study of temperature effect on uni-univalent and uni-bivalent ion exchange reaction

Ion exchange equilibrium constant (K) for Cl⁻/Br⁻ and Cl⁻/C₂O₄²⁻ system was studied at different temperatures from 30 to 45°C. For both uni-univalent and uni-bivalent exchange systems, the value of K increases with rise in temperature i.e., from 1.16 at 30°C to 2.95 at 45°C for Cl⁻/Br⁻ system and 19.5 at 30°C to 30.0 at 45°C for Cl⁻/C₂O₄²⁻ system indicating the endothermic ion exchange reaction. The difference in K values at the same temperature for the two was related to the ionic charge of exchangeable ions in the solution. The article is published in the original.     

Formation of supramolecular complex between imidazole and dichloro(5,10,15,20-tetraphenylporphinato)zirconium(IV)

By the reaction of 5,10,15,20-tetraphenyl-21H,23H-porphin (H₂TPP) with zirconium tetrachloride in boiling benzonitrile a complex was obtained, dichloro(5,10,15,20-tetraphenylporphinato)zirconium(IV), (Cl)₂ZrTPP. The equilibrium and reaction rate of stepwise reactions of (Cl)₂ZrTPP with imidazole (Im) in toluene were investigated by spectrophotometry. It was established that the three steps of the complex formation include reversible processes of coordination of Im molecule and substitution of 2Cl⁻ by the second and third Im molecules. The products of the first and second stages of the reaction, (Cl)₂(Im)ZrTPP and [(Cl)(Im)₂ZrTPP]⁺Cl⁻, respectively, are unstable and dissociate slowly at one Zr-Cl bond. By the analysis of the numerical values of the reactions parameters with accounting for the existence of definite spectral response to the presence of an organic base was shown a better prospect of application of (Cl)₂ZrTPP in sensor systems than those of metallophtalocyianines and doubly charged cation complexes with porphyrins.     

Interaction of [Mo6Cl14]2− with H2Se: Selective Preparation of [Mo6SeCl13]3−

Reaction of [Mo₆(μ₃-Cl)₈Cl₆]²⁻ with H₂Se, generated in situ from ZnSe and 4 M HCl under hydrothermal conditions lead to the substitution of one or two bridging chlorides, depending on the reagents ratio. With the Mo₆/ZnSe 1:3 molar ratio [Mo₆(μ₃-SeCl₇)Cl₆]³⁻ forms selectively in high yield. Further substitution is more hindered, and even at 1:20 cluster-to-selenide molar ratio a mixture of [Mo₆(μ₃-SeCl₇)Cl₆]³⁻ and [Mo₆(μ₃-Se₂Cl₆)Cl₆]⁴⁻ is formed. The products were characterized by X-ray, Raman spectra and electrospray ionization mass spectrometry.     

Measurement of the rate constants of the reactions of the chlorine atom with C<Subscript>3</Subscript>F<Subscript>7</Subscript>I and CF<Subscript>3</Subscript>I using the resonance fluorescence of chlorine atoms

The rate constants of the reactions of the chlorine atom with C₃F₇I (k ₁) and CF₃I (k ₂) have been measured using the resonance fluorescence of chlorine atoms in a flow reactor at 295 K: k ₁ = (5.2 ± 0.3) × 10⁻¹² cm³ molecule⁻¹ s⁻¹ and k ₂ = (7.4 ± 0.6) × 10⁻¹³ cm³ molecule⁻¹ s⁻¹. No iodine atoms have been detected in the reaction products.