The classic Wells-Dawson polyoxometalate, K6[alpha-P2W18O62].14H2O. Answering an 88 year-old question: what is its preferred, optimum synthesis?

The 88-year-old problem of developing a preferred, optimized synthesis of the prototype Wells-Dawson polyoxometalate, K6[alpha-P2W18O62].14H2O, is addressed herein. Specifically, six published syntheses of K6[alpha-P2W18O62].14H2O are listed and discussed, with emphasis given to the two most recent syntheses, Nadjo and co-workers' 2004 synthesis and a 1997 Inorganic Syntheses procedure by Droege, Randall, Finke et al. (hereafter D-R-F). For the starting experiment, the synthesis by Nadjo and co-workers was repeated. Next, the D-R-F synthesis and then the earlier (1984) synthesis in Droege's Ph.D. thesis were repeated and reinvestigated. The results demonstrate that the Nadjo synthesis produces over 200 g of high alpha-isomer purity (> or =97% by (31)P NMR) K6[alpha-P 2W18O62].14H2O in four steps over 8 days in 93% yield in our hands. A recrystallization step added as part of this work (for a total of five steps over 12 days) produces an increase in purity (>99%) with a concomitant loss of 8% yield (i.e., 85% overall yield) for the Nadjo-plus-recrystallization synthesis. Next, the D-R-F Inorganic Syntheses procedure was reinvestigated to determine the cause of "failed syntheses" occasionally encountered in our laboratories, the most recent and worst example to date being when one of us (C.R.G.) found 150 g of K10[alpha2-P 2W17O61] as an undesired side product when, as it turns out, the D-R-F Inorganic Syntheses procedure is followed rather than the earlier Droege synthesis. Specifically, it is shown that the problem in the Inorganic Syntheses procedure is that it ambiguously says to add 210 mL of HCl until a pH of 3-4 is reached when, in fact, it takes only 130-150 mL of HCL to reach a pH 3-4. Adding the full 210 mL of HCl ensures that a pH <2 is reached, as is required to produce isomerically pure K6[alpha-P 2W18O62].14H2O from the K 10[alpha 2-P 2W 17O 61] intermediate. The result is K6[alpha-P2W18O62].14H2O in five steps over 10 days in 82% yield and > or =97% purity. A table is provided comparing the details of the two best syntheses as reported herein: the Nadjo-plus-recrystallization synthesis and the D-R-F synthesis (with sufficient added HCl/proper pH control). That table makes apparent that the Nadjo-plus-recrystallization synthesis is improved on the basis of its better atom economy, its slightly higher product yields (85% vs 82%), slightly better purity (>99% vs >97%), and its comparable time (2 days shorter without recrystallization but 2 days longer with recrystallization) in comparison to the D-R-F synthesis with proper pH <2 control. Perhaps most importantly, some take-home messages concerning polyoxometalate synthesis illustrated by the iterative, 88 year-old quest to the best K6[alpha-P 2W18O62].14H2O synthesis are summarized and briefly discussed.     

Reactions of trivacant Wells-Dawson heteropolytungstates. Ionic strength and Jahn-Teller effects on formation in multi-iron complexes

Reaction of alpha-P(2)W(15)O(56)(12-) and Fe(III) in a saturated NaCl solution produces a trisubstituted Wells-Dawson structure with three low-valent metals, alpha-(Fe(III)Cl)(2)(Fe(III)OH(2))P(2)W(15)O(59)(11-) (1). Dissolution of this species into 1 M NaBr (Br(-) is non-coordinating) gives the triaquated species alpha-(Fe(III)OH(2))(3)P(2)W(15)O(59)(9-) (2). Ionic strength values of 1 M or greater are necessary to avoid decomposition of 1 or 2 to the conventional sandwich-type complex, alpha beta beta alpha-(Fe(III)OH(2))(2)Fe(III)(2)(P(2)W(15)O(56))(2)(12-) (3). If the pH is greater than 5, a new triferric sandwich, alpha alpha beta alpha-(NaOH(2))(Fe(III)OH(2))Fe(III)(2)(P(2)W(15)O(56))(2)(14-) (4), forms rather than 3. Like the previously reported Wells-Dawson-derived sandwich-type structures with three metals in the central unit ([TM(II)Fe(III)(2)(P(2)W(15)O(56))(P(2)TM(II)(2)W(13)O(52))],(16-) TM = Cu, Co), this complex has a central alpha-junction and a central beta-junction. Thermal studies suggest that 4 is more stable than 3 over a wide range of temperatures and pH values. The intrinsic Jahn-Teller distortion of d-electron-containing metal ions incorporated into the external sites of the central multi-metal unit impacts the stoichiometry of their incorporation (with a consequent change in the inter-POM-unit connectivity, where POM = polyoxometalate). Reaction of non-distorting Ni(II) with the diferric lacunary sandwich-type POM alpha alpha alpha alpha-(NaOH(2))(2)Fe(III)(2)(P(2)W(15)O(56))(2)(16-) (5) produces alpha beta beta alpha-(Ni(II)OH(2))(2)Fe(III)(2)(P(2)W(15)O(56))(2)(14-) (6), a Wells-Dawson sandwich-type structure with two Ni(II) and two Fe(III) in the central unit. All structures are characterized by (31)P NMR, IR, UV-vis, magnetic susceptibility, and X-ray crystallography. Complexes 4 and 6 are highly selective and effective catalysts for the H(2)O(2)-based epoxidation of alkenes.     

New polyoxometalate compounds built up of lacunary Wells-Dawson anions and trivalent lanthanide cations

Five new polyoxometalate compounds built on lacunary Wells-Dawson anions and trivalent lanthanide cations, KNa3[Nd2(H2O)10(alpha2-P2W17O61)].11H2O (1), (H3O)[Nd3(H2O)17(alpha2-P2W17O61)].6.75H2O (2), (H2bpy)2[Nd2(H2O)9 (alpha2-P2W17O61)].4.5H2O (3), (H2bpy)2[La2(H2O)9(alpha2-P2W17O61)].4.5H2O (4), and (H2bpy)2[Eu2(H2O)9(alpha2-P2W17O61)].5H2O (5), have been synthesized and characterized by elemental analysis, IR, TG, and single-crystal X-ray diffraction. Compound 1 shows a bisupporting polyoxometalate cluster structure where two {Nd(H2O)7}3+ fragments are supported on the polyoxometalate dimer [{Nd(H2O)3(alpha2-P2W17O61)}2]14-; this represents the first bisupporting polyoxometalate compound based on a polyoxometalate dimer. Compound 2 displays a 1D chain structure built up of bisupporting polyoxoanions [{Nd(H2O)7}2{Nd(H2O)3(alpha2-P2W17O61)}2]8- and Nd3+ ions. Compounds 3-5 are isostructural and show a 2D structure constructed of 1D polyoxometalate chains of [Ln(H2O)2(alpha2-P2W17O61)]n(7n-) linked by Ln3+ ions. Compounds 2-5 represent the first extended structures formed by lacunary Wells-Dawson anions and trivalent lanthanide ions. The influence of the Ln3+/[alpha2-P2W17O61]10- ratio on the syntheses of these five compounds has been studied. Furthermore, the fluorescent activity of compound 5 is reported.     

The lacunary polyoxoanion synthon alpha-P(2)W(15)O(56)(12-): an investigation of the key variables in its synthesis plus multiple control reactions leading to a reliable synthesis

A reliable way to determine the purity of the kinetically precipitated, noncrystalline lacunary polyoxoanion alpha-P(2)W(15)O(56)(12-) has been developed, namely, the conversion of alpha-P(2)W(15)O(56)(12-) into the tri-Nb(5+)- and V(5+)-containing polyoxoanions P(2)W(15)Nb(3)O(62)(9-) and P(2)W(15)V(3)O(62)(9-), respectively, followed by quantitative analysis of their purity by (31)P-NMR prior to recrystallization. With this previously unappreciated, straightforward alpha-P(2)W(15)O(56)(12-) purity-assessment methodology in hand, the five reported literature syntheses of alpha-P(2)W(15)O(56)(12-) are investigated with an emphasis on understanding the effects of the five differing variables within these syntheses (the amount of Na(2)CO(3) base, the rate of addition of the base, the reaction temperature, the reaction scale, and the product drying method). Two methods of Nb(5+) addition (Nb(6)O(19)(8-) and NbCl(5)) to yield P(2)W(15)Nb(3)O(62)(9-) are also evaluated, as is the issue of whether any purification is provided by the normally optimum strategy of first preparing a water-soluble salt and its crystallization from water (here the (CH(3))(4)N(+) salt of the Nb-O-Nb bridged anhydride, P(4)W(30)Nb(6)O(123)(16-)), followed by its conversion to the organic-solvent soluble, but noncrystalline, (n-C(4)H(9))(4)N(+) salt, [(n-C(4)H(9))(4)N](9)[P(2)W(15)Nb(3)O(62)]. The results yield five previously unavailable and unequivocal insights: (1) Only the amount of added Na(2)CO(3) base affects the purity or yield of the desired alpha-P(2)W(15)O(56)(12-); the amount of added base is key, however. (2) Contant's 1990 Inorganic Syntheses procedure provides the highest-purity alpha-P(2)W(15)O(56)(12-) presently available. (3) All prior syntheses calling for the addition of base to P(2)W(18)O(62)(6-) until pH 9 must be abandoned. (4) The purity of even Contant's alpha-P(2)W(15)O(56)(12-) is only 90%. (5) An identifiable impurity is the 16 tungsten polyoxoanion, alpha-P(2)W(16)()O(59)(12-). Also identified and summarized are multiple compounding errors in the observation of, reporting on, and thinking about the synthesis of alpha-P(2)W(15)O(56)(12-) historically, errors which delayed the most reliable synthesis of alpha-P(2)W(15)O(56)(12-) from being identified for 18 years (from the 1983 discovery of alpha-P(2)W(15)O(56)(12-)). However, these errors yield valuable take-home lessons for anyone interested in working in this demanding area of inorganic synthetic chemistry, where direct structural methods for identifying the products and their purity, such as the lacunary polyoxoanion synthon alpha-P(2)W(15)O(56)(12-), sometimes simply do not exist.     

Voltammetric Reduction of alpha- and gamma-[S2W18O62]4- and alpha-, beta-, and gamma-[SiW12O40]4-: isomeric dependence of reversible potentials of polyoxometalate anions using data obtained by novel dissolution and conventional solution-phase processes

Comparative studies on the voltammetric reduction of the alpha and gamma isomers of Dawson [S(2)W(18)O(62)](4)(-) and alpha, beta, and gamma forms of Keggin [SiW(12)O(40)](4)(-) polyoxometalate anions have been undertaken. For the six reversible one-electron [S(2)W(18)O(62)](4)(-)(/5)(-)(/6)(-)(/7)(-)(/8)(-)(/9)(-)(/10)(-) processes in acetonitrile, reversible potentials (E(0)(')) were found to be independent of isomeric form within experimental error (+/-5 mV). However, because both the alpha and gamma* isomers of [Bu(4)N](4)[S(2)W(18)O(62)] are insoluble in water, solid-state voltammetric studies with microcrystals adhered to electrode surfaces in contact with aqueous Et(4)NCl and Bu(4)NCl electrolyte media were also possible. Although no isomeric distinction was again detected in the solid-state studies, it was found that reduction of adhered solid by four or more electron equivalents led to rapid dissolution. When Et(4)NCl was the electrolyte, this dissolution process coupled with potential cycling experiments enabled conventional solution-phase data to be obtained in water for the analogous six one-electron reduction steps previously detected in acetonitrile. A strong medium effect attributed to Lewis acidity effects was apparent upon comparison with E(0)(') data obtained in water and acetonitrile. In contrast, with the [SiW(12)O(40)](4)(-) system, E(0)(') values for the [SiW(12)O(40)](4)(-)(/5)(-)(/6)(-)(/7)(-) processes in acetonitrile exhibited a larger (about 70 mV) dependence on isomeric form, and the isomerization step, [gamma-SiW(12)O(40)](6)(-)--> [alpha-SiW(12)O(40)](6)(-), was detected on the voltammetric time scale. The influence of isomeric form on reversible potential data is considered in terms of structural and charge density differences exhibited in the [S(2)W(18)O(62)](4)(-) and [SiW(12)O(40)](4)(-) systems studied in this paper and published data available on the alpha, beta, gamma, and gamma isomers of [As(2)W(18)O(62)](6)(-) and [P(2)W(18)O(62)](6)(-) Dawson anions and Keggin systems.     

Organic-soluble lacunary {M(2)(P(2)W(15))(2)} polyoxometalate sandwiches showing a previously unseen αββα isomerism

New polyoxometalate 'sandwiches' have been formed where two [P(2)W(15)O(56)](12-) lacunary Dawson clusters encapsulate two transition metal ions to give clusters with the general formula [M(II)(2)(P(2)W(15)O(56))(2)](20-) (where M = Mn, Co, and Ni respectively), [Fe(III)(2)(P(2)W(15)O(56))(2)](18-), and [Cu(II)(4)(P(2)W(15)O(56))(2)](16-). The Mn, Co, and Ni clusters exhibit a hitherto unseen αββα isomeric geometry and all five compounds are associated with tetrabutylammonium cations which allow for their dissolution in non-aqueous solvent.     

New organosilyl derivatives of the Dawson polyoxometalate [alpha2-P2W17O61(RSi)2O]6-: synthesis and mass spectrometric investigation

In the field of functionalized polyoxometalates, organosilyl derivatives of polyoxotungstate constitute a special class of hybrid organic-inorganic system. The first organosilyl derivative of the monovacant Dawson heteropolyoxotungstate [alpha2-P2W17O61]10- was obtained by three different methods. The use of two organosilanes as reagents enabled the preparation of the functionalized polyoxometalate [alpha2-P2W17O61(RSi)2O]6- in good yield. Electrospray (ESI-MS) and matrix-assisted laser desorption ionization time-of-flight (MALDI-TOF) mass spectrometry, and 183W, 31P, and 29Si NMR spectroscopy were used to characterize the composite systems. In several cases, ESI-MS analyses generated reduction processes which were compared to those related to [PMo11VO40]4-, the highly reducible Keggin polyoxometalate.     

Increased Lewis acidity in hafnium-substituted polyoxotungstates

Monolacunary polyoxotungstates [alpha(1)-P(2)W(17)O(61)](10-) and [alpha-PW(11)O(39)](7-) react with HfCl(4) to yield [alpha(1)-HfP(2)W(17)O(61)](6-) and [alpha-Hf(OH)PW(11)O(39)](4-), isolated as organo-soluble tetrabutylammonium (TBA) salts. Subsequent analyses, including mass spectrometry, show that they are stronger Lewis acids than (TBA)(5)H(2)[alpha(1)-YbP(2)W(17)O(61)]. The new polyoxotungstates catalyze Lewis acid mediated organic reactions, such as Mukaiyama aldol and Mannich-type additions. In particular, reactions with aldehydes, which were impossible with lanthanide polyoxotungstates, are made possible. Thus these modifications of the polyoxometalate composition allowed fine tuning of the Lewis acidity. The catalysts could be easily recovered and reused.     

Lanthanide complexes of [alpha-2-P2W17O61]10-: solid state and solution studies

We have isolated the 1:1 Ln:[alpha-2-P2W17O61]10- complexes for a series of lanthanides. The single-crystal X-ray structure of the Eu3+ analogue reveals two identical [Eu(H2O)3(alpha-2-P2W17O61)]7- moieties connected through two Eu-O-W bonds, one from each polyoxometalate unit. An inversion center relates the two polyoxometalate units. The Eu(III) ion is substituted for a [WO]4+ unit in the "cap" region of the tungsten-oxygen framework of the parent Wells-Dawson ion. The point group of the dimeric molecule is Ci. The extended structure is composed of the [Eu(H2O)3(alpha-2-P2W17O61)]214- anions linked together by surface-bound potassium cations. The space group is P, a = 12.7214(5) A, b = 14.7402(7) A, c = 22.6724(9) A, alpha = 71.550(3), beta = 84.019(3)degrees, gamma = 74.383(3), V = 3883.2(3) A3, Z = 1. The solution studies, including 183W NMR spectroscopy and luminescence lifetime measurements, show that the molecules dissociate in solution to form monomeric [Ln(H2O)4(alpha-2-P2W17O61)]7- species.     

Multi-iron tungstodiarsenates. Synthesis,characterization, and electrocatalytic studies of alphabetabetaalpha-(Fe(III)OH(2))(2)Fe(III)(2)(As(2)W(15)O(56))(2)(12)(-)

Reaction of the trivacant lacunary complex, alpha-Na(12)[As(2)W(15)O(56)], with an aqueous solution of Fe(NO(3))(3).9H(2)O yields the sandwich-type polyoxometalate, alphabetabetaalpha-Na(12)(Fe(III)OH(2))(2)Fe(III)(2)(As(2)W(15)O(56))(2) (Na1). The structure of this complex, determined by single-crystal X-ray crystallography (a = 13.434(1) A, b = 13.763(1) A, c = 22.999(2) A, alpha = 90.246(2) degrees, beta = 102.887(2) degrees, gamma = 116.972(1) degrees, triclinic, Ponemacr;, R1 = 5.5%, based on 25342 independent reflections), consists of an Fe(III)(4) unit sandwiched between two trivacant alpha-As(2)W(15)O(56)(12)(-) moieties. UV-vis, infrared, cyclic voltammetry, and elemental analysis data are all consistent with the structure determined from X-ray analysis. Magnetization studies confirm that the four Fe(III) centers are antiferromagnetically coupled. A cyclic voltammogram of Na1 reveals that a three-wave W(VI) system replaces the two-wave W(VI) system found in the precursor alpha-As(2)W(15)O(56)(12)(-) complex. The observed modifications in the CV patterns of Na1 and alpha-As(2)W(15)O(56)(12)(-) are most likely due to subsequent changes in the acid-base properties of two reduced POMs that occur as a result of Fe(III) incorporation. Na1 is shown to be more efficient than the monosubstituted complex alpha(2)-As(2)(Fe(III)OH(2))W(17)O(61)(7)(-) in the electrocatalytic reduction of dioxygen. This is attributed to cooperativity effects among the adjacent Fe(III) centers in Na1.     

Sensing the chirality of Dawson lanthanide polyoxometalates [alpha1-LnP2W17O61]7- by multinuclear NMR spectroscopy

Lanthanide complexes of the chiral Dawson phosphotungstate [alpha(1)-P(2)W(17)O(61)](10-) were used to study the formation of diastereomers with optically pure organic ligands. The present work started with the full assignment of the (183)W NMR spectra of [alpha(1)-Yb(H(2)O)(4)P(2)W(17)O(61)](7-) at different temperatures and concentrations, which allowed the structure of the dimerized form in aqueous solution to be established. Different enantiopure amino acids and phosphonic acids were screened as ligands. Both types allowed chiral differentiation by multinuclear NMR spectroscopy under fast-exchange conditions. Functional groups with a good affinity for the oxo framework of the polyoxometalate were identified, and maps of the interactions between L-serine and N-phosphonomethyl-L-proline with [alpha(1)-Yb(H(2)O)(4)P(2)W(17)O(61)](7-) were established. This demonstrates the power of (183)W NMR spectroscopy to elucidate the molecular recognition of inorganic molecules by organic compounds. N-Phosphonomethyl-L-proline appears to be a convenient ligand to promote separation of the diastereomers and ultimately resolution of the enantiomers of [alpha(1)-Yb(H(2)O)(4)P(2)W(17)O(61)](7-).     

Synthesis and structure of dawson polyoxometalate-based, multifunctional, inorganic-organic hybrid compounds: organogermyl complexes with one terminal functional group and organosilyl analogues with two terminal functional groups

Four novel multifunctional polyoxometalate (POM)-based inorganic-organic hybrid compounds, [α(2)-P(2)W(17)O(61){(RGe)}](7-) (Ge-1, R(1) = HOOC(CH(2))(2(-)) and Ge-2, R(2) = H(2)C═CHCH(2(-))) and [α(2)-P(2)W(17)O(61){(RSi)(2)O}](6-) (Si-1, R(1) and Si-2, R(2)), were prepared by incorporating organic chains having terminal functional groups (carboxylic acid and allyl groups) into monolacunary site of Dawson polyoxoanion [α(2)-P(2)W(17)O(61)](10-). In these POMs, new modification of the terminal functional groups was attained by introducing organogermyl and organosilyl groups. Dimethylammonium salts of the organogermyl complexes, (Me(2)NH(2))(7)[α(2)-P(2)W(17)O(61)(R(1)Ge)]·H(2)O MeN-Ge-1 and (Me(2)NH(2))(7)[α(2)-P(2)W(17)O(61)(R(2)Ge)]·4H(2)O MeN-Ge-2, were obtained as analytically pure crystals, in 22.8% and 55.3% yields, respectively, by stoichiometric reactions of [α(2)-P(2)W(17)O(61)](10-) with separately prepared Cl(3)GeC(2)H(4)COOH in water, and H(2)C═CHCH(2)GeCl(3) in a solvent mixture of water/acetonitrile. Synthesis and X-ray structure analysis of the Dawson POM-based organogermyl complexes were first successful. Dimethylammonium salts of the corresponding organosilyl complexes, (Me(2)NH(2))(6)[α(2)-P(2)W(17)O(61){(R(1)Si)(2)O}]·4H(2)O MeN-Si-1 and (Me(2)NH(2))(6)[α(2)-P(2)W(17)O(61){(R(2)Si)(2)O}]·6H(2)O MeN-Si-2, were also obtained as analytically pure crystalline crystals, in 17.1% and 63.5% yields, respectively, by stoichiometric reactions of [α(2)-P(2)W(17)O(61)](10-) with NaOOC(CH(2))(2)Si(OH)(2)(ONa) and H(2)C═CHCH(2)Si(OEt)(3). These complexes were characterized by elemental analysis, thermogravimetric and differential thermal analyses (TG/DTA), FTIR, solid-state ((31)P) and solution ((31)P, (1)H, and (13)C) NMR, and X-ray crystallography.     

缺位的Wells-Dawson型磷钨酸盐和Eu(Ⅲ)构筑的一维链状多金属氧酸盐化合物

在水溶液条件下以六缺位的[H2P2W12O48)]12-和Eu髥为反应前躯体得到了1个新的多金属氧酸盐化合物[Eu3(H2O)17(α2-HP2W17O61)].5H2O(1),对其进行了元素分析、红外光谱、热重、荧光等表征,并用X-射线单晶衍射测定了它的晶体结构。化合物1含有双支撑的多阴离子簇[{Eu(H2O)7}2{Eu(H2O)3(α2-P2W17)}2]8-,并进一步通过Eu髥连接形成了延c轴方向的一维链。室温条件下的荧光光谱研究表明:化合物1显示了强的红光发射。     

Confirmation of the semivacant Wells-Dawson polyoxotungstate skeleton. The structures of [Ce{X(H4)W17O61}2]19- (X = P, As) indicate the probable location of internal protons

Reaction of Ce(III) with lacunary versions of [H(4)XW(18)O(62)](7-) (X = P, As) yields the 1:2 complexes [Ce(H(4)XW(17)O(61)](19-) (X = As, 1; P, 2) in good yield, characterized in solution and the solid state by NMR spectroscopy and X-ray crystallographic analysis, respectively. The structures confirm a syn C(2) conformation that is analogous to that observed for [Ln(alpha(2)-P(2)W(17)O(61))(2)](17-) but with "empty" O(4) tetrahedra that are in positions remote from the cerium atom. Bond valence sum calculations for these structures show that the four protons that are required for charge balance in all salts of the XW(18) anions and their lacunary derivatives are almost certainly bound to the oxygen atoms of the empty tetrahedra.     

Preparation and characterization of polyoxometalate/protein ultrathin films grown on electrode surfaces using layer-by-layer assembly

We report a new electrostatic layer-by-layer assembly method for the controlled deposition of electrocatalytically active enzymes onto electrode surfaces using polyoxometalate as the counteranion. Cytochrome c (cyt c), a redox active protein, and P(2)W(18)O(62)(6-), a Dawson-type polyoxometalate, were deposited onto glassy carbon electrodes by two procedures: static dipping and electrochemical cycling. Cyclic voltammetry and UV-vis spectroscopy reveal that approximately 1.5 x 10(-10) mol/cm(2) of P(2)W(18)O(62)(6-) and 2.2 x 10(-11) mol/cm(2) of cytochrome c are deposited per cycle, which correspond to approximately one monolayer of each molecule. The thicknesses of the resulting films measured by atomic force microscopy also indicate that the films are formed in a layer-by-layer fashion. Experimental factors that affect electron-transfer rate in these films, such as scan rate and film thickness, were systematically analyzed. The use of {P(2)W(18)O(62)(6-)/cyt c}n films to catalyze hydrogen peroxide reduction was demonstrated.     

New ionic crystals of oppositely charged cluster ions and their characterization

By reacting Keggin-type polyoxometalate cluster anions H(2)W(12)O(40)(6)(-) (metatungstate) or Co(II)W(12)O(40)(6)(-) (tungstocobaltate) with the large aluminum cluster polycation [Al(30)O(8)(OH)(56)(H(2)O)(26)](18+), Keggin ion based molecular ionic compounds [delta-Al(13)O(4)(OH)(24)(H(2)O)(12)][XW(12)O(40)](OH).nH(2)O (X = H(2) (1) and Co (2); n congruent with 20) and [W(2)Al(28)O(18)(OH)(48)(H(2)O)(24)][H(2)W(12)O(40)](2).55H(2)O (3) were obtained. The polygon-shaped cluster ions are packed alternately through intercluster hydrogen bonds as well as electrostatic interactions, leaving large pores, which result from the packing of large clusters. The clusters are arranged in square pyramidal geometries, showing face-to-face interactions between them. The isolation of metastable [delta-Al(13)O(4)(OH)(24)(H(2)O)(12)](7+) and the formation of a new transition metal substituted aluminum heteropolycation [W(2)Al(28)O(18)(OH)(48)(H(2)O)(24)](12+) in 1-3 result from the slow fragmentation and recombination of Al(30) in the presence of suitable counter cluster anions with similar shape and charge.     

Large cluster formation through multiple substitution with lanthanide cations (La, Ce, Nd, Sm, Eu, and Gd) of the polyoxoanion

Several new large polyoxotungstates have been synthesized by reaction of lanthanide cations with the well-known "As(4)W(40)" anion, [(B-alpha-AsO(3)W(9)O(30))(4)(WO(2))(4)](28-) (1). The heteropolyanions [(H(2)O)(11)Ln(III)(Ln(III)(2)OH)(B-alpha-AsO(3)W(9)O(30))(4)(WO(2))(4)](20)(-) (Ln = Ce, Nd, Sm, Gd) (2-4) (Ln(3)As(4)W(40)) and [M(m)()(H(2)O)(10)(Ln(III)(2)OH)(2)(B-alpha-AsO(3)W(9)O(30))(4)(WO(2))(4)]((18-m)(-)) (Ln = La, Ce, Gd and M = Ba, K, none) (5-7) (Ln(4)As(4)W(40)) have been isolated as alkali metal and ammonium salts, respectively, and characterized by single-crystal X-ray analysis, elemental analysis, and IR and (183)W-NMR spectroscopy. The X-ray analyses revealed interanionic W-O-Ln bonds between adjacent Ln(x)()As(4)W(40) units forming a "dimer" for x = 3 and chains for x = 4. Upon dissolving in water these bonds hydrolyze and the monomeric species form. The straightforward syntheses which require the use of concentrated NaCl solutions (1-4 M) and the addition of stoichiometric amounts of Ba(2+) or K(+) reemphasize the importance of the presence of appropriate countercations for the assembly of large polyoxometalate structures.     

Ionic liquid-enhanced photooxidation of water using the polyoxometalate anion [P2W18O62](6-) as the sensitizer

Simple polyoxometalate anions are known to be photoreduced in molecular solvents in the presence of 2-propanol or benzyl alcohol. The use of ionic liquids (ILs) as the solvent is now reported to also allow the photooxidation of water to be achieved. In particular, the photochemistry of the classic Dawson polyoxometalate salt K(6)[P(2)W(18)O(62)] has been studied in detail when water is present in the aprotic IL, 1-butyl-3-methylimidazolium tetrafluoroborate ([Bmim][BF(4)]) and the protic IL, diethanolamine hydrogen sulfate (DEAS). In these and other ILs, irradiation with white light (wavelength 275-750 nm) or UV light (wavelength 275-320 nm) leads to overall reduction of the [P(2)W(18)O(62)](6-) anion to [P(2)W(18)O(62)](7-) and concomitant oxidation of water to dioxygen and protons. The modified structure of bulk water present in ILs appears to facilitate its oxidation. Analogous results were obtained in aqueous solutions containing the protic IL as an electrolyte. The photoproducts (reduced polyoxometalate anion, dioxygen, and protons) were identified by, respectively, voltammetry, a Clark electrode, and monitoring of pH. The formal reversible potentials E(0)(F) for [P(2)W(18)O(62)](6-/7-/8-/9-/10-) couples are much more positive than in molecular solvents. The [P(2)W(18)O(62)](8-) and more reduced anions, if formed as intermediates, would efficiently reduce photoproducts H(+) or dioxygen to produce [P(2)W(18)O(62)](7-), rather than reform to [P(2)W(18)O(62)](6-). Thus, under photoirradiation conditions [P(2)W(18)O(62)](7-) acts as a kinetic sink so that in principle indirect splitting of water to produce dioxygen and dihydrogen can be achieved. The equivalent form of photooxidation does not occur in liquid water or in molecular solvents such as MeCN and MeCN/CH(2)Cl(2) containing added water, but does occur for solid K(6)[P(2)W(18)O(62)] in contact with water vapor.     

Preparation and Tungsten-183 NMR Characterization of [alpha-1-P(2)W(17)O(61)](10)(-), [alpha-1-Zn(H(2)O)P(2)W(17)O(61)](8)(-), and [alpha-2-Zn(H(2)O)P(2)W(17)O(61)](8)(-)

The preparation of the alpha-1 and alpha-2 isomers of the Wells-Dawson 17 tungsto derivatives by standard methods is accompanied by a significant proportion of the other isomer present as an impurity. In this study, the alpha-1 and alpha-2 isomers of [Zn(H(2)O)P(2)W(17)O(61)](8)(-) have been prepared in >98% purity by reacting isomerically pure K(9)Li[alpha-1-P(2)W(17)O(61)] and K(10)[alpha-2-P(2)W(17)O(61)], respectively, with ZnCl(2), while rigorously controlling the pH at 4.7. The molecules were isolated as potassium salts. For (183)W NMR and (31)P NMR characterization, both molecules were ion exchanged by cation-exchange chromatography, maintaining the pH at 4.7, to obtain the lithium salts. Removal of water and isolation of a solid sample of [alpha-1-Zn(H(2)O)P(2)W(17)O(61)](8)(-) was achieved by lyophilization at -40 degrees C. The chemical shift data from (31)P and (183)W NMR spectroscopy of the isolated [alpha-1-Zn(H(2)O)P(2)W(17)O(61)](8)(-) and [alpha-2-Zn(H(2)O)P(2)W(17)O(61)](8)(-) isomers are consistent with a mixture of the alpha-1 and alpha-2 isomers reported previously;(1) the molecules have the expected C(1) and C(s)() symmetry, respectively. The [alpha-1-Zn(H(2)O)P(2)W(17)O(61)](8)(-) isomer is stable in the pH range of 4.6-6 at temperatures <35 degrees C. Using the same ion exchange and lyophilization techniques, the lacunary [alpha-1-P(2)W(17)O(61)](10)(-) isomer was isolated as the lithium salt; characterization by (183)W NMR spectroscopy confirms the C(1) symmetry.     

Functionalization of heteropolyanions-osmium and rhenium nitrido derivatives of Keggin- and Dawson-type polyoxotungstates: synthesis, characterization and multinuclear ((183)W, (15)N) NMR, EPR, IR, and UV/Vis fingerprints

Reaction of K(10)[alpha(2)-P(2)W(17)O(61)] or K(10)[alpha(1)-P(2)W(17)O(61)] or [Bu(4)N][OsCl(4)N] in a water/methanol mixture, and subsequent precipitation with (Bu(4)N)Br provided [alpha(2)-P(2)W(17)O(61){Os(VI)N}](7-) and [alpha(1)-P(2)W(17)O(61){Os(VI)N}](7-) Dawson structures as tetrabutylammonium salts. Reactions of [(Bu(4)N)(4)][alpha-H(3)PW(11)O(39)] with either [ReCl(3)(N(2)Ph(2))(PPh(3))(2)] or [Bu(4)N][ReCl(4)N] are alternatives to the synthesis of [(Bu(4)N)(4)][alpha-PW(11)O(39){Re(VI)N}]. (183)W and (15)N NMR, EPR, IR, and UV-visible spectroscopies and cyclic voltammetry have been used to characterize these compounds and the corresponding [(Bu(4)N)(4)][alpha-PW(11)O(39){Os(VI)N}] Keggin derivative.