Fast and reliable protein microarray production by a new drop-in-drop technique

In contrast to DNA microarrays, production of protein microarrays is an immense technological challenge due to high complexity and diversity of proteins. In this paper we investigate three essential aspects of protein microarray fabrication based on the highly parallel and non-contact TopSpot technology: evaporation of probes during long lasting production times, optimization of protein immobilization and improvement of protein microarray reproducibility. Evaporation out of the printhead reservoirs was reduced to a minimum by sealing the reservoirs with gas permeable foils or PDMS frames. This led to dramatically lowered setup times through the possibility of long-term, ready-to-print storage of filled printheads. To optimize immobilization efficiency 128 printing buffers were tested by printing two different proteins onto seven different microarray slide types. This way we were able to reduce the CV of spot diameter on the microarray slide below 1.14%. To remarkably increase protein immobilization efficiency on microarray slides the commonly used EDC-NHS system (a laboratory method for immobilization of proteins) was miniaturized by using a new drop-in-drop printing technique. Additionally the very fast UV cross-linking was used to immobilize antibodies. The optimized system was used to produce antibody microarrays and with it microarray ELISA experiments were performed successfully.     

Hydrogel droplet microarrays with trapped antibody-functionalized beads for multiplexed protein analysis

Antibody microarrays are a powerful tool for rapid, multiplexed profiling of proteins. 3D microarray substrates have been developed to improve binding capacity, assay sensitivity, and mass transport, however, they often rely on photopolymers which are difficult to manufacture and have a small pore size that limits mass transport and demands long incubation time. Here, we present a novel 3D antibody microarray format based on the entrapment of antibody-coated microbeads within alginate droplets that were spotted onto a glass slide using an inkjet. Owing to the low concentration of alginate used, the gels were highly porous to proteins, and together with the 3D architecture helped enhance mass transport during the assays. The spotting parameters were optimized for the attachment of the alginate to the substrate. Beads with 0.2 μm, 0.5 μm and 1 μm diameter were tested and 1 μm beads were selected based on their superior retention within the hydrogel. The beads were found to be distributed within the entire volume of the gel droplet using confocal microscopy. The assay time and the concentration of beads in the gels were investigated for maximal binding signal using one-step immunoassays. As a proof of concept, six proteins including cytokines (TNFα, IL-8 and MIP/CCL4), breast cancer biomarkers (CEA and HER2) and one cancer-related protein (ENG) were profiled in multiplex using sandwich assays down to pg mL(-1) concentrations with 1 h incubation without agitation in both buffer solutions and 10% serum. These results illustrate the potential of beads-in-gel microarrays for highly sensitive and multiplexed protein analysis.     

Microarray technology as a universal tool for high-throughput analysis of biological systems

Over the last years microarray technology has become one of the principal platform technologies for the high-throughput analysis of biological systems. Starting with the construction of first DNA microarrays in the 1990s, microarray technology has flourished in the last years and many different new formats have been developed. Peptide and protein microarrays are now applied for the elucidation of interaction partners, modification sites and enzyme substrates. Antibody microarrays are envisaged to be of high importance for the high-throughput determination of protein abundances in translational profiling approaches. First cell microarrays have been constructed to transform microarray technology from an in vitro technology to an in vivo functional analysis tool. All of these approaches share a common prerequisite: the solid support on which they are generated. The demands on this solid support are thereby as manifold as the applications themselves. This review is aimed to display the recent developments in surface chemistry and derivatization, and to summarize the latest developments in the different application areas of microarray technology.     

Construction of an antibody microarray based on agarose-coated slides

The antibody microarray, a high-throughput multiplex immunoassay method, has become a significant tool for quantitative proteomics studies. We describe here the strategies for optimizing the condition of antibody microarray building based on agarose-coated slides. In this study, modified glass slides were robotically printed with capture antibodies against monocyte chemoattractant protein 1 (MCP-1), then dilutions of the cytokine were applied to the arrays, and the protein was detected with biotin-labeled antibody coupled with Cy3-conjugated streptavidin. Thus a protein profiling microarray based on sandwich immunoassay has been established. Various factors in the production of antibody microarrays were analyzed: the capture antibody concentrations, shelf life of the postprinting slides, blocking buffers, and reproducibility of the system. A calibration curve with a correlation coefficient of 0.9995 was established which suggested that the matrix can retain arrayed proteins in near-quantitative fashion. The results revealed high signal uniformity and reproducibility with regard to intra-array (1.3%) and the interarray (8.7%) variation at the capture antibody concentration of 125 microg/mL. Besides, the printed arrays could be stored for at least two months without any apparent change of the performance parameters.     

Applications of protein microarray technology

Protein microarrays, an emerging class of proteomic technologies, are quickly becoming essential tools for large-scale and high throughput biochemistry and molecular biology. Recent progress has been made in all the key steps of protein microarray fabrication and application, such as the large-scale cloning of expression-ready prokaryotic and eukaryotic ORFs, high throughput protein purification, surface chemistry, protein delivery systems, and detection methods. Two classes of protein microarrays are currently available: analytical and functional protein microarrays. In the case of analytical protein microarrays, well-characterized molecules with specific activity, such as antibodies, peptide-MHC complexes, or lectins, are used as immobilized probes. These arrays have become one of the most powerful multiplexed detection platforms. Functional protein microarrays are being increasingly applied to many areas of biological discovery, including drug target identification/validation and studies of protein interaction, biochemical activity, and immune responses. Great progress has been achieved in both classes of protein microarrays in terms of sensitivity and specificity, and new protein microarray technologies are continuing to emerge. Finally, protein microarrays have found novel applications in both scientific research and clinical diagnostics.     

Design and application of GB virus C (GBV-C) peptide microarrays for diagnosis of GBV-C/HIV-1 co-infection

The main objectives of the design of GB virus C (GBV-C) peptide microarrays are the miniaturisation of antigen–antibody interaction assays, the simultaneous analysis of several peptide sequences and the reduction in the volume of serum required from patients since this always represents a limiting factor in studies to develop new systems for diagnosing human diseases. We herein report the design of a microarray immunoassay based on synthetic peptides derived from the GBV-C E2 protein to evaluate their diagnostic value in detecting anti-E2 antibodies in HIV-1 patients. To this end, peptide microarrays were initially prepared to identify the most relevant epitopes in the GBV-C E2 protein. Thus, 124 peptides composed of 18 amino acids covering the whole E2-protein sequence, with 15 residue overlaps, were spotted in triplicate onto γ-aminopropyl silane-functionalised adsorbent binding slides. The procedure to select the E2 protein epitopes was carried out using serum samples from HIV-1-infected patients. The samples had previously been tested for the presence or absence of GBV-C anti-E2 antibodies by means of the Abbott test. Thus, 11 specific epitopes in the GBV-C E2 protein were identified. Subsequently, peptide antigen microarrays were constructed using the E2 epitopes identified to detect GBV-C anti-E2 antibodies in the serum of HIV-1-infected patients with no known GBV-C co-infection. The 11 peptides selected identified anti-E2 GBV-C antibodies among HIV-1-infected patients, and a reactivity of 47 % was established. The potential antigenic peptides selected could be considered a useful tool for designing a new diagnostic system based on peptide microarrays to determine anti-GBV-C E2 antibodies in the serum of HIV-1-infected patients.     

Next generation of protein microarray support materials: evaluation for protein and antibody microarray applications

The performance of protein and antibody microarrays is dependent on various factors, one of which is the use of an appropriate microarray surface for the immobilisation of either protein or antibody samples. We have investigated the properties of seven new surfaces in the context of both protein and antibody microarray technology. We have demonstrated the functionality of all new slide coatings and investigated the mean signal to spotted concentration ratio, determined detection limits and calculated coefficients of variation. Moreover, new concepts for slide coatings such as dendrimer and poly(ethylene glycol)-epoxy slides were evaluated and improved qualities of novel slide surfaces were observed. Optimal slide coatings for antibody and protein chips were proposed and the requirements for both technologies were discussed.     

Attomole microarray detection of microRNAs by nanoparticle-amplified SPR imaging measurements of surface polyadenylation reactions

Multiple microRNAs (miRNAs) are detected in a microarray format using a novel approach that combines a surface enzyme reaction with nanoparticle-amplified SPR imaging (SPRI). The surface reaction of poly(A) polymerase creates poly(A) tails on miRNAs hybridized onto locked nucleic acid (LNA) microarrays. DNA-modified nanoparticles are then adsorbed onto the poly(A) tails and detected with SPRI. This ultrasensitive nanoparticle-amplified SPRI methodology can be used for miRNA profiling at attomole levels.     

Chemiluminescence microarrays in analytical chemistry: a critical review

Multi-analyte immunoassays on microarrays and on multiplex DNA microarrays have been described for quantitative analysis of small organic molecules (e.g., antibiotics, drugs of abuse, small molecule toxins), proteins (e.g., antibodies or protein toxins), and microorganisms, viruses, and eukaryotic cells. In analytical chemistry, multi-analyte detection by use of analytical microarrays has become an innovative research topic because of the possibility of generating several sets of quantitative data for different analyte classes in a short time. Chemiluminescence (CL) microarrays are powerful tools for rapid multiplex analysis of complex matrices. A wide range of applications for CL microarrays is described in the literature dealing with analytical microarrays. The motivation for this review is to summarize the current state of CL-based analytical microarrays. Combining analysis of different compound classes on CL microarrays reduces analysis time, cost of reagents, and use of laboratory space. Applications are discussed, with examples from food safety, water safety, environmental monitoring, diagnostics, forensics, toxicology, and biosecurity. The potential and limitations of research on multiplex analysis by use of CL microarrays are discussed in this review. Figure

Achievements in the development of CL microarray analysis platforms     

Rapid microarray detection of DNA and proteins in microliter volumes with surface plasmon resonance imaging measurements

A four-chamber microfluidic biochip is fabricated for the rapid detection of multiple proteins and nucleic acids from microliter volume samples with the technique of surface plasmon resonance imaging (SPRI). The 18 mm × 18 mm biochip consists of four 3 μL microfluidic chambers attached to an SF10 glass substrate, each of which contains three individually addressable SPRI gold thin film microarray elements. The 12-element (4 × 3) SPRI microarray consists of gold thin film spots (1 mm(2) area; 45 nm thickness), each in individually addressable 0.5 μL volume microchannels. Microarrays of single-stranded DNA and RNA (ssDNA and ssRNA, respectively) are fabricated by either chemical and/or enzymatic attachment reactions in these microchannels; the SPRI microarrays are then used to detect femtomole amounts (nanomolar concentrations) of DNA and proteins (ssDNA binding protein and thrombin via aptamer-protein bioaffinity interactions). Microarrays of ssRNA microarray elements are also used for the ultrasensitive detection of zeptomole amounts (femtomolar concentrations) of DNA via the technique of RNase H-amplified SPRI. Enzymatic removal of ssRNA from the surface due to the hybridization adsorption of target ssDNA is detected as a reflectivity decrease in the SPR imaging measurements. The observed reflectivity loss is proportional to the log of the target ssDNA concentration with a detection limit of 10 fM or 30 zeptomoles (18?000 molecules). This enzymatic amplified ssDNA detection method is not limited by diffusion of ssDNA to the interface, and thus is extremely fast, requiring only 200 s in the microliter volume format.     

Quantum dots-based reverse phase protein microarray

CdSe nanocrystals, also called quantum dots (Qdots) are a novel class of fluorophores, which have a diameter of a few nanometers and possess high quantum yield, tunable emission wavelength and photostability. They are an attractive alternative to conventional fluorescent dyes. Quantum dots can be silanized to be soluble in aqueous solution under biological conditions, and thus be used in bio-detection. In this study, we established a novel Qdot-based technology platform that can perform accurate and reproducible quantification of protein concentration in a crude cell lysate background. Protein lysates have been spiked with a target protein, and a dilution series of the cell lysate with a dynamic range of three orders of magnitude has been used for this proof-of-concept study. The dilution series has been spotted in microarray format, and protein detection has been achieved with a sensitivity that is at least comparable to standard commercial assays, which are based on horseradish peroxidase (HRP)-catalyzed diaminobenzidine (DAB) chromogenesis. The data obtained through the Qdot method has shown a close linear correlation between relative fluorescence unit and relative protein concentration. The Qdot results are in almost complete agreement with data we obtained with the well-established HRP-DAB colorimetric array (R² = 0.986). This suggests that Qdots can be used for protein quantification in microarray format, using the platform presented here.     

A renewable, chemoselective, and quantitative ligand density microarray for the study of biospecific interactions

Novel renewable microarray technology has been developed to immobilize and release carbohydrates and proteins from self-assembled monolayers (SAMs) of electroactive quinone-terminated alkanethiolates on gold surfaces. This method may be applied to a variety of research fields for use in biosensor technology and the generation of renewable and tailored microarrays for biospecific cell-based assays.     

Detection of proteins cross-linked within galactoside polyacrylate-based hydrogels by means of a quantum dot fluororeagent

Protein toxins have been immobilized in a galactoside polyacrylate hydrogel in a microarray format. The large pore size and solution-like environment of these novel hydrogels allow for easy penetration of large proteins and detection reagents. Confocal microscopy provided three-dimensional visualization of dye-labeled toxins cross-linked within the gel and of streptavidin-coated quantum dot (QD) fluorophores used to visualize the toxins after incubation with biotinylated anti-toxin antibodies. Fluorescence microscopy was utilized to visualize arrays of toxins detected by a biotinylated antibody and then exposure to streptavidin-conjugated QDs. The intensity of the QD fluorescence was quantified, and binding to two toxins on three types of hydrogels was examined.     

Fabrication of DNA microarrays on nanoengineered polymeric ultrathin film prepared by self-assembly of polyelectrolyte multilayers

Microarray-based technology is in need of flexible and cost-effective chemistry for fabrication of oligonucleotide microarrays. We have developed a novel method for the fabrication of oligonucleotide microarrays with unmodified oligonucleotide probes on nanoengineered three-dimensional thin films that are deposited on glass slides by consecutive layer-to-layer adsorption of polyelectrolytes. Unmodified oligonucleotide probes were spotted and immobilized on these multilayered polyelectrolyte thin films (PET) by electrostatic adsorption and entrapment on the porous structure of the PET film. The PET provides higher probe binding capacity and thus higher hybridization signal than that of the traditional two-dimensional aminosilane and poly-L-lysine coated slides. Immobilized probe densities of 3.4 x 10(12)/cm2 were observed for microarray spots on PET with unmodified 50-mer oligonucleotide probes, which is comparable to the immobilized probe densities of alkyamine-modified 50-mer probes end-tethered on an aldehyde-functionalized slide. The study of hybridization efficiency showed that 90% of immobilized probes on PET film are accessible to target DNA to form duplex format in hybridization. The DNA microarray fabricated on PET film has wider dynamic range (about 3 orders of magnitude) and lower detection limit (0.5 nM) than the conventional amino- and aldehyde-functionalized slides. Oligonucleotide microarrays fabricated on these PET-coated slides also had consistent spot morphology. In addition, discrimination of single nucleotide polymorphism of 16S rRNA genes was achieved with the PET-based oligonucleotide microarrays. The PET microarrays constructed by our self-assembly process is cost-effective, versatile, and well suited for immobilizing many types of biological active molecules so that a wide variety of microarray formats can be developed.     

PNA encoding (PNA=peptide nucleic acid): from solution-based libraries to organized microarrays

Microarray-based technologies have attracted attention in chemical biology by virtue of their miniaturized format, which is well suited to probe ligand-protein interactions or investigate enzymatic activity in complex biological mixtures. A number of research groups have reported the preparation of surfaces on microarrays with specific functional groups to chemoselectively attach small molecules from libraries. We have developed an alternative method whereby libraries are encoded with peptide nucleic acid (PNA), such that libraries which exist as mixtures in solution self-assemble into an organized microarray through hybridization to produce readily available DNA arrays. This allows libraries synthesized by split and mix methods to be decoded in a single step. An asset of this method compared to direct spotting is that libraries can be used in solution for bioassays prior to self-assembly into the microarray format.     

糖芯片的检测及应用

糖芯片技术具有样品少、通量高和特异性强等优点,是一种糖组学研究的新的技术平台和强大的分析工具,已经广泛用于糖和蛋白质的特异性作用、酶活性和抑制剂、病毒入侵机理、细菌检测和免疫反应等方面的研究.本文简要介绍了糖芯片的原理、制备和信号的检测技术(荧光标记法、质谱法、SPR法等),分析了糖芯片在各个领域的应用及其发展前景.     

Genomewide expression analysis in amino acid-producing bacteria using DNA microarrays

DNA microarray technology has become an important research tool for biotechnology and microbiology. It is now possible to characterize genetic diversity and gene expression in a genomewide manner. DNA microarrays have been applied extensively to study the biology of many bacteria including Escherichia coli, but only recently have they been developed for the Grampositive Corynebacterium glutamicum. Both bacteria are widely used for biotechnological amino acid production. In this article, in addition to the design and generation of microarrays as well as their use in hybridization experiments and subsequent data analysis, we describe recent applications of DNA microarray technology regarding amino acid production in C. glutamicum and E. coli. We also discuss the impact of functional genomics studies on fundamental as well as applied aspects of amino acid production with C. glutamicum and E. coli.