Functional and optical properties of Au:TiO2 nanocomposite films: The influence of thermal annealing

A set of nanocomposite thin films consisting of Au nanoclusters dispersed in a TiO₂ dielectric matrix was deposited by reactive magnetron sputtering, and subjected to thermal annealing in vacuum, at temperatures ranging from 200 to 800 °C. The obtained results show that the structure and the size of Au clusters, together with the matrix crystallinity, changed as a result of the annealing, and were shown to be able to change the optical properties of the films and keeping good mechanical properties, opening thus a wide number of possible applications. The crystallization of the gold nanoclusters induced by the annealing was followed by a systematic change in the overall coating behaviour, namely the appearance of surface plasmon resonance (SPR) behaviour. This effect enables to tailor the thin films reflectivity, absorbance and colour coordinates, contributing to the importance of this thin film system. The different attained optical characteristics (reflectance values ranging from interference to metallic-like behaviours and colour varying for interference rainbow-like to several tones of red-brownish), associated with a reasonable mechanical resistance of the coatings (good adhesion to different substrates and hardness values ranging from 5 to 7.5 GPa), induce the possibility to use this film system in a wide range of decorative applications.     

Shape evolution of gold nanoparticles

The tetraoctylammonium bromide-stabilized gold nanoparticles have been successfully fabricated. The shape evolution of these nanoparticles under different annealing temperatures has been investigated using high-resolution transmission electron microscopy. After an annealing at 100 °C for 30 min, the average diameters of the gold nanoparticles change a little. However, the shapes of gold nanoparticles change drastically, and facets appear in most nanoparticles. After an annealing at 200 °C for 30 min, not only the size but also the shape changes a lot. After an annealing at 300 °C for 30 min, two or more gold nanoparticles coalesce into bigger ones. In addition, because of the presence of Cu grid during the annealing, some gold particles become the nucleation sites of Cu₂O nanocubes, which possess a microstructure of gold-particle core/Cu₂O shell. These Au/Cu₂O heterostructure nanocubes can only be formed at a relatively high temperature (≥300 °C). The results can provide some insights on controlling the shapes of gold nanoparticles.     

Surface-enhanced Raman scattering effect of gold nanoparticle arrays: The influence of annealing temperature,excitation power and array thickness

Gold nanoparticle arrays are fabricated for surface-enhanced Raman scattering (SERS) and the effect of the annealing temperature, the thickness of nanoparticle array and the exciting power on the SERS signals are investigated. The particle distribution and particle size are dense and uniform on the glass substrate when the 10 nm gold film was annealed at 250 °C and strong SERS signals for Rhodamine 6G were achieved via a 532 nm excitation with a 10 mW power. The SERS signal at 1650 cm⁻¹ is enhanced more than 10 times as compared to that of the gold film without annealing. The strong SERS behavior of gold nanoparticle arrays may broaden the SERS applications in biomedical and analytical chemistry.     

Fabrication of gold nano-particle arrays using two-dimensional templates from holographic lithography

We report a simple and cost effective method to fabricate regular metallic particle arrays over large areas with good regularity by using holographic lithography interference for the study of localized surface plasmon. Samples of disk-shaped gold nano-particles arranged in square arrays with lattice spacing ranging from 300 nm to 600 nm were successfully fabricated on glass substrates first by sputtering a thin gold layer onto two-dimensional photoresist templates of hole arrays in square lattice obtained by the holographic method and then removing the photoresist by a lift-off procedure. The plasmonic resonance of the gold nano-particle arrays due to the change of morphology by thermal annealing was studied. The disk-shaped gold nano-particles were found to become more round shaped upon heating and blue shift of the extinction plasmonic band was observed. The results were explained with model calculations using spheroidal particles.     

Size-selected copper oxide nanoparticles synthesized by laser ablation

Size-tuned copper oxide nanoparticles with sizes of 9, 12, and 15 nm were fabricated by laser ablation and on-line size selection using a differential mobility analyzer at a gas pressure of 666 Pa. The dependence of the particle properties on the in situ annealing temperatures and selection sizes was investigated. The crystalline phases of the nanoparticles fabricated at temperatures below 973 K were assigned to monoclinic cupric oxide (CuO) which converted into cubic cuprous oxide (Cu₂O) when the annealing temperature was above 1,173 K. This indicates that the crystalline phases can be easily controlled by changing the annealing temperature. TEM images confirmed that well-crystallized and well-dispersed CuO and Cu₂O nanoparticles with narrow size distributions were obtained using this method. This fabrication process is useful and promising for the future investigation of the intrinsic size-dependent properties of CuO and Cu₂O.     

Growth of monodisperse nanocrystals of cerium oxide during synthesis and annealing

Monodisperse cerium oxide nanocrystals have been successfully synthesised using simple ammonia precipitation technique from cerium(III) nitrate solution at different temperatures in the range 35–80 °C. The activation energy for growth of CeO₂ nanocrystals during the precipitation is calculated as 11.54 kJ/mol using Arrhenius plot. Average crystal diameter was obtained from XRD analysis, HR-TEM and light scattering (PCS). The analysis of size data from HR-TEM images and PCS clearly indicated the formation of highly crystalline CeO₂ particles in narrow size range. CeO₂ nanocrystals precipitated at 35 °C were further annealed at temperatures in the range 300–700 °C. The activation energy for crystal growth during annealing is also calculated and is close to the reported values. An effort is made to predict the mechanism of crystal growth during the precipitation and annealing.     

Dosimetric phosphor based on oxygen-deficient alumina ceramics

Oxygen-deficient alumina ceramics with blue luminescence was synthesized in reducing medium (vacuum, presence of carbon) from nanopowder at varying temperatures and annealing time. The structure of the samples, particle size distribution, changes in mass of the samples at different synthesis temperatures were studied. In the obtained ceramics the spectra of photoluminescence are registered in the band centered at 420 nm, which is associated with the F-centers created by oxygen vacancies. The luminescent intensity grows with increasing temperature and annealing time. The thermoluminescence curves feature two peaks whose intensities depend on the temperature of the ceramics synthesis. Dose response of the thermoluminescence peaks of alumina ceramics synthesized at 1700 °C was measured under beta-irradiation.     

Noble metal nanoparticles produced by nanosecond laser ablation

Silver and gold thin films were deposited by pulsed laser ablation in a controlled Ar atmosphere at pressures between 10 and 100 Pa. Different morphologies, ranging from isolated nanoparticle arrays up to nanostructured thin films were observed. Fast imaging of the plasma allowed deducing the expansion dynamics of the ablated plume. Plasma velocity and volume were used together with the measured average ablated mass per pulse as input parameters in a model to estimate the average size of nanoparticles grown in the plume. The nanoparticle size is expected to decrease from 4 nm down to 1 nm with decreasing Ar pressure between 100 and 10 Pa: this was confirmed by transmission electron micrographs which indicate a reduced dispersion of particle size over narrow size ranges. The production of substrates for surface enhanced Raman scattering whose performances critically depend on nanoparticle size, shape, and structure is discussed.     

Sol–gel synthesis of pure nano sized β-tricalcium phosphate crystalline powders

β-Tricalcium phosphate (β-TCP) nano powders (80 nm) were synthesized using a simple sol–gel route with calcium nitrate and potassium dihydrogenphosphate as calcium and phosphorus precursors, respectively. Double distilled water was used as a diluting media for β-TCP sol preparation and ammonia was used to adjust the pH. After aging, the β-TCP gel was dried at 40 °C and calcined to different temperatures ranging from 200 to 800 °C. The dried and calcined powders were characterized for phase composition using X-ray diffractrometry (XRD) and Fourier transform-infrared spectroscopy (FT-IR). The particle size and morphology was studied using Transmission electron microscopy (TEM). Calcination revealed that with increase in temperature, both the crystallinity and crystallite size of β-TCP particles increased. Particle size distribution analysis of the calcined β-TCP at 800 °C showed a narrow skewed distribution plot centered between 70 and 80 nm. This value was in closed agreement with particle size values obtained from XRD analysis (83 ± 6 nm). The present study showed that narrowly distributed, high crystalline, pure β-TCP could be obtained using this simple technique for biomedical applications.     

Size-induced effect on nano-crystalline CoFe2O4

Cobalt ferrite (CoFe₂O₄) nano-particles have been synthesized successfully and we studied the effect of temperature on them. The particles have been annealed at different temperatures ranging from 373 to 1173 K. Significant effect on the physical parameters like crystalline phase, crystallite size, particle size, lattice strain and magnetic properties of the nano-particles has been investigated. The studies have been carried out using a powder X-ray diffractometer (XRD), a transmission electron microscope (TEM) and a vibrating sample magnetometer (VSM). A thorough study of the variation of specific surface area and particle size with annealing is presented here, with their effects on saturation magnetization.     

Damping of the localized surface plasmon polariton resonance of gold nanoparticles

We report on a strong damping of the localized surface plasmon polariton resonance of gold nanoparticles. The ultra-fast dephasing time of localized surface plasmon polariton resonances in gold nanoparticles was systematically studied as a function of the particle size at a fixed photon energy of h ν=1.85 eV. Dephasing times ranging from T₂^expT_{2}^{\mathrm{exp}} = 5.5 fs to 15.0 fs were extracted and an influence of the reduced dimensions was detected. We have identified two dominant damping mechanisms: the well-known surface scattering and, for the first time, band structure changes. We have quantified the influence of these band structure changes on the optical properties by determining the essential damping parameter A to be A ^exp=0.32 nm/fs.     

The effect of cerium oxide argon-annealed coatings on the high temperature oxidation of a FeCrAl alloy

Ceria coatings were applied in order to improve the adherence of alumina scales developed on a model Fe–20Cr–5Al alloy during oxidation at high temperature. These coatings were performed by argon annealing of a ceria sol–gel coating at temperatures ranging between 600 and 1000 °C. The influence of these coatings on the alloy oxidation behaviour was studied at 1100 °C. In situ X-ray diffraction (XRD) was performed to characterize the coating crystallographic nature after annealing and during the oxidation process. The alumina scale morphologies were studied by means of scanning electron microscopy (SEM) coupled with energy dispersive X-ray spectroscopy (EDS). The present work shows that the alumina scale morphology observed on cerium sol–gel coated alloy was very convoluted. On the cerium sol–gel coated alloy, argon annealing results in an increase of the oxidation rate in air, at 1100 °C. The 600 °C argon annealing temperature results in a good alumina scale adherence under thermal cycling conditions at 1100 °C.     

The influence of thermal annealing on the structural and magnetic properties of gold nanoparticles

In the past few years ferromagnetic-like behavior has been reported in metal gold nanoparticles coated with diverse organic surfactants. In this work we report on the effect of thermal annealing on the ferromagnetic-like behavior of oleic acid and oleylamine coated gold nanoparticles of about 7 nm size. The magnetic moment of the “as prepared” sample is about 3×10⁻² emu/g and the coercive field is 200 Oe at 10 kOe and 5 K, after the annealing the behavior changes from ferromagnetic-like to paramagnetic and the magnetization at 10 kOe decreases at a factor of 10. These results are compared with those obtained for oleylamine coated gold nanoparticles, which are diamagnetic at room temperature.     

Photochemical preparation of ZnO nanoparticles

Preparation of zinc oxide nanoparticles from aqueous solutions containing zinc nitrate or formate using UV irradiation was investigated. Analysis of solid phase formed during irradiation confirmed the presence of zinc oxide or zinc peroxide nanoparticles ranging in size from 1 to 70 nm, depending on initial precursors. Annealing at temperatures 650–1000 °C results in forming of rice-like zinc oxide particles, up to hundreds of nm in size. Photochemical method yields material with high chemical purity and uniform particle size distribution. In addition, photo-induced doping of zinc oxide with lanthanum was studied. Presence of lanthanum in zinc oxide crystal lattice and post-preparation treatment in reduction atmosphere significantly increase the UV excitonic luminescence at 395 nm in radioluminescence spectra.     

Well-crystallized zinc oxide quantum dots with narrow size distribution

In this study, pulsed laser ablation, online annealing, and following size classification using a differential mobility analyzer (DMA) were employed to fabricate quantum dots (QDs) of zinc oxide (ZnO). The irregularly shaped ZnO particles were obtained at annealing temperature less than 873 K, which gradually transformed into spherical QDs with increasing the annealing temperature. Finally, ZnO QDs with narrow size distribution having spherical shapes were successfully obtained at temperatures above 1173 K under the DMA classification at a nominal size of 10 nm. TEM observation demonstrated that the ZnO QDs obtained by this process were well-crystallized single crystallites with a wurtzite structure. Further, ZnO QDs with average sizes in the range of 4.8–8.1 nm were successfully fabricated by reducing the specified sizes of DMA. These features of the fabricated ZnO QDs are favorable for investigation of intrinsic quantum size effect in ZnO.     

Surface effect on the size evolution of surface plasmon resonances of Ag and Au nanoparticles dispersed within mesoporous silica

The optical absorption has been investigated for silver and gold nanoparticles dispersed within the pores of monolithic mesoporous silica after annealing at different temperatures. It has been shown that with reduction of the particle size, the surface plasmon resonance position blue-shifts first and then red-shifts for silver/silica samples, but only red-shifts for gold/silica samples. This size evolution of the resonance is completely different from that previously reported for fully embedded particles. Based on the interaction of the particle surface with ambient air and the porosity at the particle/matrix interface, we present a multi-layer core/shell model and assume that the chemical adsorption of gas molecules from the air on the free surface of nanoparticles within the pores is mainly responsible for the observed size evolution of the resonance.     

Synthesis of nano hydroxyapatite powder that simulate teeth particle morphology and composition

A simple sol–gel precipitation technique to synthesize nano hydroxyapatite (HA) particles (30 nm) that show similar morphology, size and crystallinity to HA crystals of human teeth is reported. Calcium nitrate tetrahydrate and potassium dihydrogenphosphate were used as calcium and phosphorus precursors, respectively. Double distilled water was used as a diluting media for HA sol preparation and ammonia was used to adjust the pH to 11. After aging, the HA gel was dried at 40 °C and calcined to different temperatures ranging from 200 to 600 °C. The dried and calcined powders were characterized for phase composition using X-ray diffractrometry, and Fourier transform infra-red spectroscopy. The particle size and morphology was studied using Transmission electron microscopy. The particle size distribution analysis of HA powders showed skewed distribution plot. The phase and particle characterization studied above showed that HA calcined at 600 °C simulate HA crystals of teeth.     

Crystallization and surface morphology of Au/SiO2 thin films following furnace and flame annealing

A crystallization and surface evolution study of Au thin film on SiO₂ substrates following annealing at different temperatures above the eutectic point of the Au/Si system are reported. Samples were prepared by conventional evaporation of gold in a high vacuum (10⁻⁷ mbar) environment on substrates at room temperature. Thermal treatments were performed by both furnace and flame annealing techniques. Au thin films can be crystallized on SiO₂ substrates by both furnace and flame annealing. Annealing arranges the Au crystallites in the (1 1 1) plane direction and changes the morphology of the surface. Both, slow and rapid annealing result in a good background in the XRD spectra and hence clean and complete crystallization which depends more on the temperature than on the time of annealing. The epitaxial temperature for the Au/SiO₂ system decreases in the range of 350-400 °C. Furnace and flame annealing also form crystallized gold islands over the Au/SiO₂ surface. Relaxation at high temperatures of the strained Au layer, obtained after deposition, should be responsible for the initial stages of clusters formation. Gold nucleation sites may be formed at disordered points on the surface and they become islands when the temperature and time of annealing are increased. The growth rate of crystallites is highest around 360 °C. Above this temperature, the layer melts and gold diffuses from the substrate to the nucleation sites to increase the distance between islands and modify their shapes. Well above the eutectic temperature, the relaxed islands have hexagonally shaped borders. The mean crystallite diameters grow up to a maximum mean size of around 90 nm. The free activation energy for grain boundary migration above 360 °C is 0.2 eV. Therefore the type of the silicon substrate changes the mechanism of diffusion and growth of crystallites during annealing of the Au/Si system. Epitaxial Au(1 1 1) layers without formation of islands can be prepared by furnace annealing in the range of 300-310 °C and by flame annealing of a few seconds and up to 0.5 min.     

Anisotropic gold nanoparticles and gold plates biosynthesis using alfalfa extracts

Industrial and medical applications for gold nanoparticles are extensive, yet highly dependent on their chemical and structural properties. Thus, harnessing the size and shape of nanoparticles plays an important role in nanoscience and nanotechnology. Anisotropic polyhedra and nanoplates were biosynthesized via reduction of 3 mM AuCl₄ ⁻ solution at room temperature. Alfalfa biomass extracts prepared in water and in isopropanol separately were used as reducing agents at pH 3.5 and 3.0, respectively. Nanoparticles observed in the isopropanol extract presented a size range of 30–60 nm, and the morphologies present included 30 nm decahedra and 15 nm icosahedra. Gold nanoplates produced in the water extract were mainly triangular, ranging from 500 nm to 4 μm in size. The resulting nanoparticles and nanoplates can be potentially used in the study of their unique physical properties and for the mechanisms of formation using alfalfa biomass extracts.     

Synthesis of cobalt ferrite nano-particles and their magnetic characterization

Cobalt ferrite nano-particles (CoFe₂O₄) were synthesized by the co-precipitation method with ammonium hydroxide as an alkaline solution. The reactions were carried out at different temperatures between 20 and 80 °C. The nano-particles have been investigated by magnetic measurements, X-ray powder diffraction and transmission electron microscopy. The average crystallite size of the synthesized samples was between 11 and 45 nm, which was found to be dependent on both pH value of the reaction and annealing temperatures. However, lattice parameters, interplane spacing and grain size were controlled by varying the annealing temperature. Magnetic characterization of the nano-samples were carried out using a vibrating sample magnetometer at room temperature. The saturation magnetization was computed and found to lie between 5 and 67 emu/g depending on the particle size of the studied sample. The coercivity was found to exhibit non-monotonic behavior with the particle size. Such behavior can be accounted for by the combination between surface anisotropy and thermal energies. The ratio of remanence magnetization to saturation magnetization was found to exhibit almost linear dependence on the particle size.