Conformational and structural studies of 1-chloropropane and 1-bromopropane from temperature-dependant FT-IR spectra of rare gas solutions and ab initio calculations

Variable temperature (−55 to −150°C) studies of the infrared spectra (3500–400 cm⁻¹) of 1-chloropropane (CH₃CH₂CH₂Cl) and 1-bromopropane (CH₃CH₂CH₂Br) dissolved in liquid krypton and xenon, respectively, have been recorded. Utilizing two conformer pairs in krypton solution for chloride and three conformer pairs in xenon solution for bromide, enthalpy differences of 52±3 cm⁻¹ (0.62±0.06 kJ/mol) and 72±7 cm⁻¹ (0.86±0.08 kJ/mol) were obtained for the chloride and bromide, respectively, with the gauche form being the more stable conformer for both molecules. From these data, it is estimated that 28 and 26% of trans form are present at ambient temperature for the chloride and bromide, respectively. The conformation stabilities, harmonic force constants, fundamental frequencies, infrared intensities and Raman activities have been obtained from RHF/6-31G(d) and/or MP2/6-31G(d) ab initio calculations for both halopropanes and these quantities have been compared to the experimental values when appropriate. The optimized geometries have also been obtained with several different ab initio basis sets with full electron correlation by the perturbation method up to MP2/6-311+G(2d,2p). The r₀ structural parameters of both halopropanes have been obtained by combining the ab initio data with the previously reported microwave rotational constants for both conformers. The quantities are compared to the corresponding results for some similar molecules.     

Conformational stability of 1-bromo-2-fluoroethane from temperature dependent FT-IR spectra of rare gas solutions

Variable temperature (−55 to −135°C) studies of the infrared spectra (3500–400 cm⁻¹) of 1-bromo-2-fluoroethane, BrCH₂CH₂F, dissolved in liquid krypton and xenon have been recorded. From these data, the enthalpy difference has been determined to be 108±9 cm⁻¹ (1.296±0.113 kJ/mol) and 112±8 cm⁻¹ (1.346±0.098 kJ/mol) from the krypton and xenon solutions, respectively, with the trans conformer the more stable rotamer. Complete vibrational assignments are presented for both conformers which are consistent with the predicted frequencies obtained from the ab initio MP2/6-31G^* calculations. The optimized geometries, conformational stabilities, harmonic force fields, infrared intensities, Raman activities, and depolarization ratios have been obtained from RHF/6-31G^* and/or MP2/6-31G^* ab initio calculations. These quantities are compared to the corresponding experimental quantities when appropriate. Structural parameters and conformational stability have also been obtained from MP2/6-311+G^** calculations. Combining the ab initio predicted structural parameters with the microwave rotational constants, r_o parameters have been obtained for the gauche conformer.     

Conformational Stability from Variable-Temperature Infrared Spectra of Krypton Solutions, Ab Initio Calculations, and r o Structural Parameters of Chlorocyclopentane

The infrared spectra (3500–400 cm^–1) of krypton solutions of chlorocyclopentane, c-C₅H₉Cl, at variable temperatures (–101 to –150°C) have been recorded and the fundamental vibrations of the axial conformer and several of those for the equatorial form have been assigned. Utilizing two pairs of fundamentals for the two conformers in the krypton solution, an enthalpy difference of 145±15 cm^–1 (1.73±0.18 kJ-mol^–1) has been obtained with the axial conformer the more stable form. It is estimated that there is 67±2% of the axial conformer present at ambient temperature. Convincing spectroscopic evidence shows that a significant percentage of the chlorocyclopentane molecules are undergoing pseudorotation at ambient temperature. The conformational stabilities, harmonic force constants, fundamental frequencies, infrared intensities, and Raman activities have been obtained from MP2/6-31G(d) calculations with full electron correlation and these quantities have been compared to the experimental values when appropriate. The optimized geometries and conformational stabilities have also been obtained from ab initio MP2 calculations as well as by density functional theory (DFT) by the B3LYP method with several different basis sets. The adjusted r ₀ structural parameters have been obtained for both conformers by combining the ab initio data with the previously reported microwave rotational constants. These new values of the structural parameters for both conformers are compared to those previously reported from electron diffraction and microwave studies. These results are compared to the corresponding quantities of some similar molecules.     

Conformational stability of 1-pentyne from temperature dependent FT-IR spectra of liquid rare gas solutions and ab initio calculations

Variable temperature studies of the infrared spectra (3500–400 cm⁻¹) of 1-pentyne, CH₃CH₂CH₂CCH, dissolved in liquid xenon (−55 to −100°C) and liquid krypton (−105 to −150°C) have been recorded. These data indicate that the anti (methyl group trans to the acetylenic group) and gauche conformers have relative concentrations that vary with the temperature, i.e. enthalpy nonzero. Utilizing seven sets of conformer pairs for the xenon solution and ten sets of conformer pairs for the krypton solution, the enthalpy difference has been determined to be 50±6 cm⁻¹ (0.60±0.07 kJ/mol) and 45±4 cm⁻¹ (0.54±0.05 kJ/mol), respectively, with the anti conformer the more stable form. Because of two equivalent gauche forms, this conformer is estimated to be in higher abundance at 61±1% in the xenon solution and 62±1% in the krypton solution. Optimized geometries and conformational stabilities have been obtained from ab initio calculations with basis sets 6-31G(d), 6-311+G(d,p), 6-311+G(2d,2p) and 6-311+G(2df,2pd) with full electron correlation by the perturbation method to second order (MP2). All of the calculations predict the gauche rotamer to be the more stable form with a high value of 181 cm⁻¹ from the MP2/6-311+G(d,p) calculations and a low value of 107 cm⁻¹ from the MP2/6-311+G(2d,2p) calculation. The r_o adjusted structural parameters have been obtained from a combination of the microwave rotational constants and ab initio predicted parameters. The values are compared to the recently reported values from an electron diffraction study where the value for the CC bond distance appears to be too long. The results are discussed and the conformational stability is compared to those obtained for some similar molecules.     

Vibrational Spectra, Assignment, Conformational Stability and Ab Initio/DFT Calculations for 1-Nitropropane

The infrared spectra (4000–400 cm^{– 1}) of solid and the Raman spectra (3500–30 cm^{– 1}) of liquid and solid 1-nitropropane, CH₃CH₂CH₂NO₂, have been registered. Both the trans and gauche conformers have been identified in the fluid phase, while the trans form remains in the stable solid. Temperature dependence (190–230K) of the liquid 1-nitropropane Raman spectra has been carried out. From these data, the enthalpy difference was determined to be 870 ± 105 J-mol^–1, with the gauche conformer being the more stable rotamer. Ab initio and DFT calculations at different levels of approximation (HF, MP2, B3LYP, B3PW91) gave optimized geometries, harmonic force fields, and vibrational frequencies for the trans and gauche conformers. All the calculations (except the B3PW91/6-31G* level) predicted gauche as the low-energy conformer. Theoretical force constants are analyzed for formulating constraints in the molecular force field model of 1-nitropropane.     

Infrared Spectra of Krypton Solutions of Methylamine

Variable temperature (–105 to –145°C) studies of the infrared spectra (3500–400 cm^–1) of methylamine, CH₃NH₂, dissolved in liquid krypton have been recorded. From these data, the hydrogen bonding enthalpy has been determined to be 530 ± 29 cm^–1 (6.34 ± 0.35 kJ/mol). The elusive ₁₃ and ₁₄ fundamentals, which are strongly mixed CH₃ rock and NH₂ twist, have been observed at 1244 and 876 cm^–1, respectively. These assignments are supported by frequency predictions from ab initio MP2/6-31G(d) calculations where the predicted infrared intensities for these two vibrations are 0.054 and 0.002 km/mol. The ab initio predicted infrared spectrum compares very favorably with that observed in the krypton solution. Normal coordinate calculations have also been carried out for four other isotopomers of methylamine, CH₃NHD, CH₃ND₂, CD₃NH₂, and CD₃ND₂ and vibrational assignments given from previously reported infrared spectra of matrix isolated samples. The Raman spectrum of these latter three isotopes, along with the normal species, have been predicted from MP2/6-31G(d) calculations and the results compared to the experimental spectra. The equilibrium structural parameters have been obtained from ab initio calculations utilizing several different basis sets with full electron correlation by the perturbation method to second order. These predicted values are compared to the previously reported experimental structural parameters.     

Conformational Stability, Raman and Infrared Spectra, Vibrational Assignment, and Ab Initio Calculations of Allyltrifluorosilane

The Raman spectra (3500 to 30 cm^–1) of allyltrifluorosilane, CH₂CHCH₂SiF₃, in the liquid with quantitative depolarization ratios and solid states, and the infrared spectra (3500 to 30 cm^–1) of the gas and solid have been recorded. Additionally, the mid-infrared spectra of the sample dissolved in liquified xenon as a function of temperature (–100° to –55°C) have been recorded. All of these data indicate there are two conformers, the more stable gauche rotamer and a very small amount of the cis conformer in the fluid states, but only the gauche form remains in the polycrystalline solid. The variable temperature studies of the infrared spectrum of the xenon solution indicate a relatively large enthalpy difference of 354±30 cm^–1 (4.23±0.36 kJ/mol) between the conformers. The fundamental frequencies for the asymmetric (54 cm^–1) and SiF₃ (48 cm^–1) torsions for the gauche conformer were observed in the far infrared spectrum, and from the SiF₃ torsional frequency the barrier to internal rotation is calculated to have a value of 525 cm^–1 (6.28 kJ/mol). A complete vibrational assignment is presented for the gauche conformer that is consistent with the predicted wavenumbers utilizing the force constants from ab initio MP2/6-31G* calculations. The optimized geometries, conformational stabilities, harmonic force fields, infrared intensities, Raman activities, depolarization ratios, and vibrational wavenumbers have been obtained from RHF/6-31G* and/or MP2/6-31G* ab initio calculations. These quantities are compared to the corresponding experimental quantities when appropriate as well as with corresponding results for some similar molecules.Taken in part from the dissertation of Y. E. Nashed, which will be submitted to the Department of Chemistry in partial fulfillment of the Ph.D. degree     

Conformational and structural studies of ethyl fluorosilane from temperature dependent FT-IR spectra of krypton solutions and ab initio calculations

The infrared spectra (3200–30 cm⁻¹) of gaseous and solid ethyl fluorosilane, CH₃CH₂SiH₂F, have been recorded. Additionally, the Raman spectra (3200–30 cm⁻¹) of the liquid and solid have been recorded and quantitative depolarization values obtained. Both the gauche and trans conformers have been identified in the fluid phases but only the gauche conformer remains in the solid. Variable temperature (−105 to −150°C) studies of the infrared spectra of the sample dissolved in liquid krypton have been carried out. From these data, the enthalpy difference has been determined to be 54±16 cm⁻¹ (646±191 J/mol) with the gauche conformer the more stable form. This is consistent with the predictions from ab initio, MP2/6-311+G(2d,2p), calculation as well as those with smaller basis sets with full electron correlations. A complete vibrational assignment is proposed for both the trans and gauche conformers based on infrared band contours, relative intensities, depolarization values, and group frequencies, which are supported by normal-coordinate calculations utilizing the force constants from MP2/6-31G(d) ab initio calculations. Complete equilibrium geometries have been determined for both rotamers by ab initio calculations employing a variety of basis sets up to 6-311+G(2d,2p) at levels of restricted Hartree–Fock (RHF) and/or Moller Plesset to the second order (MP2) with full electron correlation. The adjusted r₀ parameters have been obtained for both conformers from a combination of the previously reported rotational constants with ab initio predicted values. All results are compared to similar quantities of some corresponding molecules.     

Infrared and Raman Spectra,Conformational Stability,Ab Initio Calculations,and Vibrational Assignments for Cyclopropyldifluorosilane

The infrared (3200–30 cm^–1) spectra of gaseous and solid Cyclopropyldifluorosilane, c-C₃H₅SiF₂H, and the Raman spectra (3200–20 cm^–1) of the liquid with quantitative depolarization values and the solid have been recorded. Both the syn (cis) and skew (gauche) conformers have been identified in the fluid phases, but only the syn conformer remains in the solid. Variable temperature (–55 to –100°C) studies of the infrared spectra of the sample dissolved in liquid xenon have been carried out. From these data, the enthalpy difference has been determined to be 73 ± 10 cm^–1 (209 ± 29 cal mol^–1), with the syn conformer being the more stable rotamer, which is at variance with the predictions from ab initio calculations. A complete vibrational assignment is proposed for both conformers based on infared band contours, relative intensities, depolarization values, and group frequencies. The vibrational assignments are supported by normal coordinate calculations utilizing the force constants from ab initio MP2/6-31G* calculations. Utilizing the frequencies of the silicon–hydrogen sketch, the rm Si—H bond distances of 1.474 and 1.472 Å have been obtained for the syn and skew conformers, respectively. Complete equilibrium geometries have been determined for both rotamers by ab initio calculations employing the 6-31G* and 6-311 +G** basis sets at levels of restricted Hartree-Fock (RHF) and/or Moller–Plesset (MP) to second order. The potential energy terms for the conformer interconversion have been obtained from the MP2/6-31G* calculation. The results are discussed and compared to those obtained for some similar molecules.     

Conformational Stability of Propenoyl Bromide from Temperature-Dependent Infrared Spectra of Krypton Solutions,Ab Initio Calculations,and r 0 Structural Parameters of the Propenoyl Halides (F,Cl, Br)

Variable temperature (–100 to –150°C) studies of the infrared spectra (3500–400 cm^–1) of propenoyl bromide, CH₂=CHCBrO, dissolved in liquid krypton, have been carried out. Utilizing six different conformer pairs, an enthalpy difference of 204 ± 20 cm^–1 (2.44 ± 0.24 kJ/mol) was obtained, with the anti conformer (carbonyl bond trans to C=C bond) the more stable form. At ambient temperature, there is approximately 28 ± 2% of the syn conformer present. The anti conformer also remains in the infrared and Raman spectra of the polycrystalline solid. The optimal geometries, conformational stabilities, harmonic force fields, infrared intensities, Raman activities, depolarization ratios, and vibrational frequencies, are reported for both conformers from MP2/6-31G(d) ab initio calculations. The potential function governing the conformational interchange has been obtained from the MP2/6-31G(d) ab initio calculations. The conformational stabilities were calculated from a variety of basis sets and at the highest level of calculations, MP2/6-311 + (2df,2pd), the anti conformer is predicted to be more stable by 178 cm^–1, which is in excellent agreement with the experimental results. The r ₀ adjusted structural parameters have been obtained for propenoyl fluoride and chloride from a combination of the previously reported microwave rotational constants and ab initio predicted parameters. Several of the parameters for the chloride are significantly different than those proposed from an electron diffraction investigation. The results of these spectroscopic, structural, and theoretical studies are discussed and compared to the corresponding results for some similar molecules.     

Raman and Infrared Spectra, Ab Initio Calculations, Normal Coordinate Analysis, and Conformational Stability of 2-Methoxypropene

The Raman (3500–40 cm^–1) and infrared (3500–70 cm^–1) spectra of gaseous and solid 2-methoxypropene, CH₃O(CH₃)C=CH₂, and the isotopomers, CD₃O(CH₃)C=CH₂ and CH₃O(CD₃)C=CD₂ have been recorded. In addition, the Raman spectra of the liquids have been recorded with qualitative depolarization measurements. All of these data indicate that only one conformer is present in the fluid phases at ambient temperature and this form is the cis conformer, which remains in the solid. Assignments are provided for the fundamentals of all three isotopomers for the cis conformer with C_s symmetry. The far-infrared spectra of all three isotopic species have been recorded at a resolution of 0.1 cm^–1 in the gas and 1.0 cm^–1 in the solid. The parameters of the potential function governing the asymmetric torsion are determined to be V₃ = 1485 ± 9 cm^–1 and V₆ = –55 ± 4 cm^–1 for the d₀ compound, where only two terms were determined, since a second conformer was not evident. The barrier to internal rotation for the methyl group attached to the oxygen atom is 1370 ± 8 cm^–1 and the C—CH₃ barrier is 772 ± 5 cm^–1. Ab initio calculations with full electron correlation have been carried out by the perturbation method to second order to obtain the equilibrium structural parameters, harmonic force constants, fundamental frequencies, infrared intensities, Raman activities, depolarization values, and conformational stability. The predicted values have been compared to the experimental values where appropriate.     

On the vibrational spectra and conformational stability of 1,1-dimethylhydrazine from temperature dependent FT-IR spectra of krypton solutions and ab initio calculations

Variable temperature (−105 to −150 °C) studies of the infrared spectra (3500–400 cm⁻¹) of 1,1-dimethylhydrazine, (CH₃)₂NNH₂, in liquid krypton have been carried out. No convincing spectral evidence could be found for the trans conformer which is expected to be at least 600 cm⁻¹ less stable than the gauche form. The structural parameters, dipole moments, conformational stability, vibrational frequencies, and infrared and Raman intensities have been predicted from MP2/6-31G(d) ab initio calculations. The predicted infrared and Raman spectra are compared to the experimental ones. The adjusted r₀ parameters from MP2/6-311+G(d,p) calculations are compared to those reported from an electron diffraction study. The energy differences between the gauche and trans conformers have been obtained from MP2 ab initio calculations as well as from density functional theory by the B3LYP method calculations from a variety of basis sets. All of these calculations indicate an energy difference of 650–900 cm⁻¹ with the B3LYP calculations predicted the larger values. The potential function governing the conformational interchange has been predicting from both types of calculations and comparisons have been made. The barrier to internal rotation by the independent rotor model of the inner methyl group is predicted to have a value of 1812 cm⁻¹ and that of the outer one of 1662 cm⁻¹ from ab initio MP2/6-31G(d) calculations. These values agree well with the experimentally determined values of 1852±16 and 1558±12 cm⁻¹, respectively, from a fit of the torsional transitions with the coupled rotor model. For the coupled rotor model the predicted V′₃₃ (sin 3τ₀ sin 3τ₁ term) value which ranged from 190 to 232 cm⁻¹ is in reasonable agreement with the experimental value of 268±3 cm⁻¹ but the predicted V₃₃ (cos 3τ₀ cos 3τ₁ term) value of −73 to −139 cm⁻¹ is 25% smaller and of the opposite sign of the experimental value of 333±22 cm⁻¹. These theoretical and spectroscopy results are compared to similar quantities of some corresponding molecules.     

Spectra and Structure of Silicon-Containing Compounds. XXVIII1 Infrared and Raman Spectra,Vibrational Assignment,and Ab Initio Calculations of Vibrational Spectrum and Structural Parameters of Vinyltrichlorosilane

The infrared spectra (3200-50 cm^–1) of gaseous and solid vinyltrichlorosilane, CH₂=CH-SiCl₃, have been recorded. In addition, the Raman spectrum (3200-10 cm^–1) of the liquid has been recorded and quantitative depolarization values obtained. The infrared spectrum of the sample dissolved in liquid xenon (–80°C) has also been recorded. Using the experimental data and normal coordinate calculations with scaled ab initio force constants, the complete vibrational assignment is proposed. The torsional mode was observed in the infrared spectrum of the gas at 69 cm^–1 and the threefold barrier of internal rotation was calculated to be 500 cm^–1 (5.98 kJ/mol). Ab initio calculations have been carried out at the restricted Hartree–Fock level of the theory as well as with full electron correlation by the perturbation method to second order with different basis sets up to 6-311+G(d,p) to obtain the optimized geometries, harmonic force constants, infrared intensities, Raman activities, depolarization ratios, and vibrational frequencies. The ab initio predicted structural parameters are compared with those obtained from a previous electron diffraction study.     

Conformational Stability of Chloromethyl Silyl Chloride from Temperature-Dependent FT-IR Spectra of Krypton Solutions

The Raman spectra (3200–30 cm^–1) of liquid and solid, and infrared spectra of gaseous and solid chloromethyl silyl chloride, ClCH₂SiH₂Cl, have been recorded. Variable temperature (–105––150°C) studies of the infrared spectra of the sample dissolved in liquid krypton have been carried out. From these data, the enthalpy difference is 177 ± 35 cm^–1 (2.12 ± 0.42 kJ/mol), with the more stable form being the trans conformer, which is consistent with the prediction from ab initio calculations at both the Hartree–Fock level and with electron correlation by the perturbation method to second order. It is estimated that 56% of the sample is in the trans form at ambient temperature. A complete vibrational assignment is proposed for both the trans and gauche conformers based on infrared band contours, relative intensities, depolarization values, and group frequencies, which is supported by normal coordinate calculations utilizing the force constants from the ab initio MP2/6-31G(d) calculations. The optimized geometries have also been obtained from ab initio calculations utilizing several different basis sets with full electron correlation by the perturbation method up to MP2/6-311+G(2d,2p). The results are discussed and compared to some corresponding results for several related molecules.     

1—羟基蒽醌及其稀土络合物的红外光谱分析

制备了稀土离子Ｌｎ＾３＋（Ｌｎ＝Ｌａ，Ｃｅ，Ｐｒ，Ｎｄ，Ｓｍ，Ｅｕ，Ｇｄ，Ｔｂ，Ｄｙ）与１－羟基蒽醌的络合物，测定了它们和氘代１－羟基蒽醌在４０００￣５０ｃｍ＾－１范围内的红外光谱，对观察红外吸收带进行分析和归属。发现了某些对金属离子敏感的谱带，确定了配位键的伸缩振动。     

Far-Infrared Spectra, Conformational Stability, Barriers to Internal Rotation, Ab Initio Calculations, r0 Structural Parameters, and Vibrational Assignment of Ethyl Methyl Ether

The far-infrared spectra (350–35 cm^–1) of gaseous ethyl methyl ether-d ₀ and ethyl methyl-d ₃-ether have been recorded at a resolution of 0.10 cm^–1. For the d ₀ species, the fundamental asymmetric torsion of the more stable trans conformer (two methyl moieties are trans to one another) has been observed at 115.40 cm^–1 with four upper state transitions falling to lower frequency, whereas, for the gauche form, it has been observed at 93.56 cm^–1 with two excited states falling to lower frequency. the corresponding series for the d ₃ species start from 106.00 and 87.10 cm^–1, respectively. From these data, the asymmetric torsional potential coefficients for the d ₀ species have been determined to be: V ₁ = 572 ± 30; V ₂ = 85 ± 8; V ₃ = 619 ± 30; V ₄ = 175 ± 18, and V ₆ = –28 ± 3 cm^–1. The trans to gauche and gauche to gauche barriers were calculated to be 958 cm^–1 (11.5 kJ/mol) and 631 cm^–1 (7.55 kJ/mol), respectively, with an energy difference of 550 ± 6 cm^–1 (6.58 ± 0.07 kJ/mol). Utilizing three conformer pairs, variable temperature studies (–105 to –150°C) of the infrared spectra of the d ₀ sample dissolved in liquid krypton gave an enthalpy difference of 547 ± 28 cm^–1 (6.54 ± 0.33 kJ/mol) with the trans conformer the more stable rotamer. It is estimated that there is only 4% of the gauche conformer present at ambient temperatures. The structural parameters, conformational stabilities, barriers to internal rotation, and fundamental vibrational frequencies, which have been determined experimentally, are compared to those obtained from ab initio gradient predictions from RHF/6-31G* and with full electron correlation at the MP2 level with three different basis sets. The adjusted r ₀ structural parameters have been obtained for the trans conformer from combined ab initio MP2/6-311+G** predictions and previously reported microwave rotational constants. The reported distances should be accurate to 0.003 Å and the angles to 0.5°. These results are compared to the corresponding quantities obtained for some similar molecules.     

An Ab Initio Study of Conformational Energies in Dioxo-, Trioxo-, and Tetroxo-Dithianes

Ab initio Hartree–Fock calculations at the HF/6-31G* level of theory for geometry optimization and the MP2/6-31G*//HF/6-31G* and B3LYP/6-311G(2df,p)//HF/6-31G* levels for a single point total energy calculation are reported for the important energy-minimum conformations of 1,1-dioxo-thiane (2), 1,1-dioxo-1,2-dithiane (3), 1,1-dioxo-1,3-dithiane (4), 1,1-dioxo-1,4-dithiane (5), 1,1,2-trioxo-1,2-dithiane (6), 1,1,3-trioxo-1,3-dithiane (7), 1,1,4-trioxo-1,4-dithiane (8), 1,1,2,2-tetroxo-1,2-dithiane (9), 1,1,3,3-tetroxo-1,3-dithiane (10), and 1,1,4,4-tetroxo-1,4-dithiane (11). According to the MP2/6-31G*//HF/6-31G* calculations, compound 5 is more stable than 3 and 4 by 7.8 and 8.9 kJ mol^?1, respectively. The axial geometries of 6 and 8 are more stable than the equatorial forms by 21.4 and 19.1 kJ mol^?1, respectively, but the equatorial form of 7 is 4.1 kJ mol^?1 more stable than the axial geometry. Compound 11 is more stable than 9 and 10 by 49.3 and 31.0 kJ mol^?1, respectively.     

Molecular Structure of ortho-Fluoronitrobenzene Studied by Gas Electron Diffraction and Ab Initio MO Calculations

The molecular structure of ortho-fluoronitrobenzene (o-FNB) has been investigated by gas-phase electron diffraction and ab initio MO calculations. The geometrical parameters and force fields of o-FNB were calculated by ab initio and DFT methods. The obtained force fields were used to calculate vibrational amplitudes required as input parameters in an electron diffraction analysis. Within the experimental error limits, the geometrical parameters obtained from the gas-phase electron diffraction analysis are mostly in agreement with the results obtained from the ab initio calculations. The main results are: the molecular geometry of o-FNB is nonplanar with a dihedral angle about C–N of 38(3)°. The r _g (C–F) bond is shortened to 1.307(13) Å in comparison with r _g (C–F) = 1.356(4) Å in C₆H₅F.     

Conformational and structural studies of 1-fluorosilacyclobutane from temperature dependent FT-IR spectra of krypton solutions and ab initio calculations

The infrared spectra (3500 to 40 cm⁻¹) of gaseous and solid and the Raman spectra (3500 to 30 cm⁻¹) of liquid and solid 1-fluorosilacyclobutane, c-C₃H₆SiFH, have been obtained. Both the axial and equatorial conformers with respect to the fluorine atom have been identified in the fluid phases. Variable temperature (−105 to −150 °C) studies of the infrared spectra of the sample dissolved in liquid krypton have been carried out. From these data, the enthalpy difference has been determined to be 282 ± 27 cm⁻¹ (3.37 ± 0.32 kJ/mol), with the equatorial conformer the more stable form and the only conformer remaining in the annealed solid. At ambient temperature there is approximately 21 ± 2% of the axial conformer present in the vapor phase. From isolated Si–H stretching frequencies the Si–H (r₀) distances are calculated to be 1.484 and 1.485 Å for the equatorial and axial conformers, respectively. Structural parameters have been predicted from MP2/6-311 + G(d,p) ab initio calculations and the adjusted r₀ parameters for both conformers were obtained from a combination of the ab initio predicted values and the six previously reported microwave rotational constants. Along with the Si–H bond distance, the Si–C, and C–C distances of 1.865(5), and 1.571(5) Å, respectively, for the equatorial conformer are significantly different from the values for these parameters previously reported from an election diffraction study. Both the SiC and CC distances and the SiF distance are longer by 0.002 and 0.004 Å, respectively, for the axial conformer. Structural parameters have also been obtained for silacyclobutane, c-C₃H₆SiH₂ and ethylsilylfluoride, CH₃CH₂SiH₂F, from combined ab initio predicted values and previously reported rotational constants. Several of these newly determined parameters are significantly different from those previously reported for both molecules. Complete equilibrium geometries, conformational stabilities, harmonic force fields, infrared intensities, Raman activities, and depolarization ratios have been determined for both rotamers by ab initio calculations employing the 6-31G(d) basis set at the level of Moller–Plesset (MP) to second order. A complete vibrational assignment supported by normal coordinate calculations is proposed for the equatorial conformer, and several of the fundamentals of the axial conformer have also been identified. The results are discussed and compared to corresponding quantities for some similar molecules.     

Conformational studies of cyclopropylmethyl isocyanate from temperature dependent FT-IR spectra of xenon solutions and ab initio calculations

Variable temperature (−55 to −100 °C) studies of the infrared spectra (3200 to 100 cm⁻¹) of cyclopropylmethyl isocyanate, c-C₃H₅CH₂NCO, dissolved in liquefied xenon, have been carried out. The infrared spectra (gas and solid) as well as the Raman spectrum of the liquid have been recorded from 3200 to 100 cm⁻¹. By analyzing six conformer pairs in xenon solutions, an enthalpy difference of 193 ± 19 cm⁻¹ (2.31 ± 0.23 kJ/mol) was obtained with the gauche–cis rotamer (the first designation indicates the orientation of the CNCO group with respect to the three-membered ring, the second designation indicates the relative orientation of the NCO group with respect to the bridging CC bond) the more stable form and the only form present in polycrystalline solid. The abundance of the cis–trans conformer present at ambient temperature is 16 ± 1%. The potential function governing the conformational interchange has been obtained from B3LYP/6-31G(d) calculations and the two-dimensional potential has been obtained. From MP2 ab initio calculations utilizing various basis sets with diffuse functions, the gauche–cis conformer is predicted to be more stable by 223 to 269 cm⁻¹, which is consistent with the experimental results. However, without diffuse functions the predicted conformational energy differences are much smaller (77–166 cm⁻¹). Similar diffuse function dependency affects density functional theory calculations by the B3LYP method to a lesser extent. A complete vibrational assignment for the gauche–cis conformer is proposed and several fundamentals for the cis–trans conformer have been identified. The structural parameters, dipole moments, conformational stability, vibrational frequencies, infrared intensities and Raman activities have been predicted from ab initio calculations and r₀ structural parameters are estimated. These experimental and theoretical results are compared to the corresponding quantities of some similar molecules.