基于Kramers逃逸速率的Duffing振子广义调参随机共振研究

以二维Duffing振子的随机共振为研究对象,提出Duffing振子的广义调参随机共振. 以Kramers逃逸速率为基础,建立了Duffing振子随机共振的判别函数,阐述了Duffing振子在不同噪声强度及信号频率输入条件下的广义调参随机共振规律,并给出了Duffing振子广义调参随机共振的一般方法. 关键词： Duffing振子 随机共振 Kramers逃逸速率 广义参数调节     

脉冲激励下环形耦合Duffing振子间的瞬态同步突变现象

研究非周期信号激励下Duffing振子动力学行为变化特征时,发现处于倍周期分岔的环形耦合Duffing振子系统,在一定的参数条件下,脉冲信号能引起其中一个振子与其他振子运动轨迹间出现短暂失同步的现象即瞬态同步突变现象.利用这种现象可以快速检测出强噪声背景中的微弱脉冲信号,从而扩展了现有的Duffing振子对非周期信号的检测范围及应用领域. 关键词： 瞬态同步突变 微弱信号检测 脉冲信号 Duffing振子     

基于Kramers逃逸速率的Duffng振子广义调参随机共振研究

以二维Duffng振子的随机共振为研究对象,提出Du?ng振子的广义调参随机共振.以Kramers逃逸速率为基础,建立了Du?ng振子随机共振的判别函数,阐述了Du?ng振子在不同噪声强度及信号频率输入条件下的广义调参随机共振规律,并给出了Du?ng振子广义调参随机共振的一般方法.     

基于耦合Duffing振子的局部放电信号检测方法研究

以双向环形耦合Duffing振子系统为对象, 研究脉冲信号激励下耦合振子间动力学行为变化特征时, 发现其与单向环形耦合Duffing振子系统类似, 在一定的参数条件下, 脉冲信号能引起其中一个振子与其他振子运动轨迹间出现短暂失同步的现象即瞬态同步突变现象. 基于这种现象, 提出了一种微弱脉冲信号检测的新方法, 用于检测强噪声背景中的局部放电脉冲信号. 实验测试表明, 利用本文方法对不同放电电极的局部放电脉冲信号进行检测时, 在低信噪比条件下可取得良好的检测效果, 进而扩展了现有的Duffing振子对非周期信号的检测范围及应用领域. 关键词： 耦合Duffing 振子 微弱信号检测 瞬态同步突变 局部放电脉冲信号     

级联双稳Duffing系统的随机共振研究

研究了级联双稳Duffing系统的随机共振特性, 证明级联双稳Duffing系统变尺度系数、阻尼比和级数等参数的适当调节, 不仅可实现大参数信号的级联随机共振, 而且可优化单级双稳Duffing系统的随机共振特征, 即参数调节的级联双稳Duffing系统能实现比单级双稳Duffing系统更好的随机共振输出. 此外, 级联双稳Duffing系统对方波信号具有良好的滤波整形作用, 可用于实现含噪方波信号的波形恢复. 关键词： 级联双稳Duffing系统 随机共振 变尺度 参数调节     

基于量子粒子群算法的自适应随机共振方法研究

为提升随机共振理论在微弱信号检测领域中的实用性,以随机共振系统参数为研究对象,提出了基于量子粒子群算法的自适应随机共振方法.首先将自适应随机共振问题转化为多参数并行寻优问题,然后分别在Langevin系统和Duffing振子系统下进行仿真实验.在Langevin系统中,将量子粒子群算法和描点法进行了寻优结果对比;在Duffing振子系统中,Duffing振子系统的寻优结果则直接与Langevin系统的寻优结果进行了对比.实验结果表明:在寻优结果和寻优效率上,基于量子粒子群算法的自适应随机共振方法要明显高于描点法;在相同条件下,Duffing振子系统的寻优结果要优于Langevin系统的寻优结果;在两种系统下,输入信号信噪比越低就越能体现出量子粒子群算法的优越性.最后还对随机共振系统参数的寻优结果进行了规律性总结.     

基于混沌和随机共振的微弱信号检测

推导了分数阶线性振子系统响应的一阶稳态矩的频率不变性和相移特性, 并通过理论分析得出, 在随机共振机制下, 分数阶线性振子对系统响应一阶稳态矩的幅值具有放大作用. 构造Duffing混沌振子检测器, 利用混沌系统对参数摄动的敏感性以及对噪声的免疫能力实现弱信号检测. 数值模拟证实, 该方法可以有效地从噪声背景中将微弱正弦信号检测出来, 并且相对传统的混沌检测方法能显著降低信噪比检测门限.     

Duffing振子微弱信号检测方法研究

在前期实验工作的基础上,从理论分析的角度,提出了利用Duffing振子从大周期态向混沌态的相变 作为判据的微弱周期信号检测方法,给出了检测原理,并论证了其可行性;从过渡带影响和检测概率两方面 将该方法与传统的检测方法进行了比较分析,并对两者的检测性能进行了仿真对比.分析和仿真结果都显示,相同条件下, Duffing振子从大周期态向混沌态的相变受过渡带影响更小,所提方法具有更好的检测性能. 实验数据还表明, Duffing振子检测微弱信号只能基于单向相变, 利用阵发混沌进行频差检测只适用于待测信号信噪比较高的情况. 关键词： Duffing 混沌 检测 过渡带     

二次采样用于随机共振从强噪声中提取弱信号的数值研究

提出了二次采样的随机共振(SR)技术，并利用该技术，实现了绝热近似理论在大参数条件下，从强噪声中提取弱信号的目标.为便于应用，研究了二次采样随机共振方法在弱信号检测中相关参数之间的关联性.数值分析表明，该法在信号分析方面有着潜在的应用价值，有望将来应用于实测信号的数据处理. 关键词： 随机共振 弱信号检测 数值分析 非线性系统     

基于Duffing振子的变尺度微弱特征信号检测方法研究

研究了Holmes型Duffing方程的混沌特性用于信号检测的方法,针对该方法只适用检测特定频率成分信号、方程参数选择不便以及噪声影响检测结果等情况,提出基于Duffing振子的变尺度微弱特征信号检测方法. 数值分析表明,该方法可以仅用一组确定的参数条件,检测任意频率、任意相位的特征信号.     

Guided-Wave Two-Dimensional Acousto-Optic Scanner Using Proton-Exchanged Lithium Niobate Waveguide

Two-dimensional scanning of a 0.6328 mum guided-light beam has been realized using noncolinear acousto-optic (AO) coplanar Bragg diffraction together with colinear AO guided-mode to substrate radiation-mode conversion in a Z-cut Xpropagation LiNbO3 proton-exchanged (PE) waveguide. The two surface acoustic (SAW) waves utilized are at the center frequencies of 500 and 200 MHz, propagating in the Y and X axes, respectively. Two-dimensional scanning of approximately 720 resolvable light beam spots, namely, 18 40 (horizontal vertical) scanning, has been demonstrated using a light beam of 1.0 mm aperture. The total number of resolvable beam spots can be greatly increased from 720 by simply utilizing SAW transducers of larger bandwidth and a light beam of greater aperture. It should also be possible to significantly increase the diffraction efficiency from 3 % by optimizing the parameters of the PE waveguide and the SAWs.     

Effect ofγ-radiation on the spectral luminescence characteristics of impure cadmium tungstate crystals

Results of a study of the effect of γ-radiation on the spectral luminescence properties of cadmium tungstate crystals doped with silver, bismuth, and molybdenum cations are presented. Spectral characteristics of the nondnnnoped crystals are briefly described. Absorption and photo and X-ray luminescence spectra of the crystals taken before and after exposure to γ-radiation (5.5·10⁴ Gy) are compared. It is found that the spectral characteristics of the crystals doped with silver, bismuth, and molybdenum cations do not change markedly after the exposure. The relation between the type of impurity-induced defects, individual characteristics of the impurity cations, and the character of the effect of γ-radiation on the spectral luminescence properties of impure crystals is analyzed (preliminarily). Translated from Zhurnal Prikladnoi Spektroskopii, Vol. 64, No. 1, pp. 55–60, January–February, 1997.     

Femtosecond Transform-Limited Pulse Generation by Compensating for the Linear Chirp of SPM Spectra in Dispersion Shifted Fibers

A simple technique of pulse compression, based on the linear chirp compensation of self-phase modulation (SPM) spectra in dispersion shifted fibers, is demonstrated. The optimization procedure is carried out, for a short span of a single-mode fiber, using a parabolic law, which describes the behavior of the squared output pulse width versus the pump peak power in the case of Gaussian pulses. The experimental results give a minimum pulse duration of 233 fs, which is in good agreement with the model. Shorter and coherent pulses, down to 90 fs, have been obtained by inserting an interference filter at the optical output.     

Sorting of bending magnets for the SSRF booster

The Shanghai Synchrotron Radiation Facility(SSRF)booster ring,a full energy injector for the storage ring,is deigned to accelerate the electron beam energy from 150MeV to 3.5GeV that demands high extraction efficiency at the extraction energy with low beam loss rate when electrons are ramping.Closed orbit distortion(COD)caused by bending magnet field uniformity errors which affects the machine performance harmfully could be effectively reduced by bending magnet location sorting.Considering the affections of random errors in measurement,both ideal sorting and realistic sorting are studied based on measured bending magnet field uniformity errors and one reasonable combination of bending magnets which can reduce the horizontal COD by a factor of 5is given as the final installation sequence of the booster bending magnets in this paper.     

Measurement of nonlinear coefficient of optical fiber based on small chirped soliton transmission

We measure the waveform and phase curves of short optical pulses before and after transmission over different lengths of fibers by use of the pulse analyzer with the frequency-resolved optical gating (FROG),and numerically simulate pulse evolution under the experimental conditions.The nonlinear coefficient of the fiber is given by comparing the experimental results with the numerical ones.Difference between the experiment and numerical simulation is analyzed.     

Resonance scattering of canonical elastic shells in absorbing fluid medium

Resonance scattering of elastic spherical shell and cylindrical shell while the surrounding fluid medium has absorption is studied. The normal mode solution derived using exact elastic theory and the separation of variables is still applicable. However, the scattering form function has to be modified for the absorbing medium, otherwise the unreasonable result would be obtained. The backscattering form function in the absorbing medium is redefined, and the form function of elastic spherical and cylindrical shell with vacuum or solid matter filled is calculated in various absorption conditions. The results show that the absorption of surrounding fluid leads to notable attenuation of the coincidence resonances in the mid-frequency, but it has a little influence on the low-frequency resonance scattering induced by the filler inside the shell.     

Single-beam self-referenced phase-sensitive surface plasmon resonance sensor with high detection resolution

A versatile and low-cost single-beam self-referenced phase-sensitive surface plasmon resonance(SPR)sensing system with ultra-high resolution performance is presented.The system exhibits a root-mean-square phase fluctuation of ±0.0028.over a period of 45 min.i.e.a resolution of±5.2×10-9 refractive index units.The enhanced performance has been achieved through the incorporation of three design elements:a true single-beam configuration enabling complete self-referencing so that only the phase change associated with SPR gets detected,a differential measurement scheme to eliminate spurious signals not related to the sensor response,and the elimination of retardation drifts by incorporating temperature stabilization in the liquid crystal phase modulato .Our design should bring the detection sensitivity of non-labeling SPR biosensing closer to that achievable by conventional fluorescence-based techniques.     

Influences of SiO2 protective layers and annealing on the laser-induced damage threshold of Ta2O5 films

Ta2O5 films are prepared on BK7 substrates with conventional electron beam evaporation deposition.The effects of SiO2 protective layers and annealing on the laser-induced damage threshold (LIDT) of the films are investigated.The results show that SiO2 protective layers exert little influence on the electric field intensity(EFI)distribution,microstructure and microdefect density but increase the absorption slightly.Annealing iS effective on decreasing the microdefect density and the absorption of the films.Both SiO2 protective layers and annealing are beneficial to the damage resistance of the films and the latter is more effective to improve the LIDT.Moreover,the maximal LIDT of Ta2O5 films is achieved by the combination of SiO2 protective layers and annealing.     

A stereo matching algorithm using multi-peak candidate matches and geometric constraints

Gray cross correlation matching technique is adopted to extract candidate matches with gray cross correla- tion coefficients less than some certain range of maximal correlation coefficient called multi-peak candidate matches. Multi-peak candidates are extracted corresponding to three closest feature points at first. The corresponding multi-peak candidate matches are used to construct the model polygon. Correspondence is determined based on the local geometric relations between the three feature points and the multi-peak candidates. The disparity test and the global consistency checkout are applied to eliminate the remaining ambiguous matches that are not removed by the local geometric relational test. Experimental results show that the proposed algorithm is feasible and accurate.