强激光加载下锡材料微喷颗粒与气体混合回收实验研究及颗粒度分析

冲击波在金属材料自由面卸载时,材料表面会形成微颗粒向外喷射,这是材料表面一种特殊的破坏形态.在内爆压缩和高压工程领域的相关物理过程中,微喷射颗粒是引起界面混合现象的重要来源,会直接影响后期的混合状态和压缩过程.而微颗粒的尺寸、形态、运动速度等是开展微喷混合过程理论和数值模拟研究的重要参数.由于实验中动态诊断的难度较大,目前已获取的微喷颗粒尺寸及分布数据十分有限.基于神光Ⅲ原型激光装置,本文设计并开展了强激光驱动冲击加载,锡材料微喷颗粒经过气体区混合后,低密度泡沫材料对微颗粒进行回收分析的实验研究.通过对微喷颗粒回收样品的X光电子计算机断层扫描分析和图像重建,获得了两个典型加载压强条件下与气体混合后微喷颗粒的三维图像,通过与真空实验条件下回收微喷颗粒图像的对比分析,对混合后的微喷颗粒分布形态有了初步的认识;测量统计了回收颗粒尺寸与数目,并通过分析,给出了微喷颗粒尺寸的双指数分布规律.     

激光加载下金属锡材料微喷颗粒与低密度泡沫混合实验研究

金属材料的微喷是冲击加载下金属表面发生的一种动态破碎现象,微喷研究在很多领域都具有重要意义,包括惯性约束聚变(ICF)和烟火制造等.由于激光实验特有的优势,近几年国内外开展了很多利用强激光驱动冲击加载研究材料微喷过程的实验.利用泡沫材料对微喷颗粒进行静态软回收虽然可以获得颗粒的形态分布、颗粒尺寸及颗粒质量等定量结果,但并不能反演微喷颗粒从进入泡沫到停滞过程中的动态混合过程.为此,在神光Ⅱ升级装置上利用皮秒脉冲激光照射金丝产生高能X射线,实现了对锡微喷颗粒与低密度泡沫混合过程的高时间分辨和高空间分辨背光照相.背光图像面密度结果证实微喷颗粒在泡沫中并没有发生二次破碎.静态回收结果表明,在锡材料与泡沫紧贴放置的情况下,微喷颗粒在泡沫中的穿透深度随着加载压强升高呈现先增大后减小的规律,与非紧贴放置的实验结果有明显的差别.     

强激光加载下金属材料微喷诊断实验研究进展

强激光加载下金属材料产生的微喷射现象及其内在的机理分析是冲击压缩科学与工程领域研究的前沿问题,相关研究对于认识材料在极端载荷条件下的动力学行为具有重要意义。近年来国内外科学家们基于各大激光装置开展了大量微喷射诊断实验研究,在喷射物性质、金属界面不稳定性增长以及微喷混合问题等方面取得了一系列重要进展。通过回顾微喷静态和动态诊断实验的研究历程,对微喷诊断实验研究方法的重要应用作了详细介绍,同时对微喷产生的主要作用机制、影响因素以及微喷混合等问题进行回顾、梳理和总结。根据当前国内外微喷诊断实验发展趋势,归纳总结目前微喷诊断实验研究结果中仍存在的不足,并对微喷射实验研究未来发展方向进行展望。     

微喷颗粒与气体混合过程的数值模拟研究

冲击波作用下金属与气体界面将发生微喷混合现象,即金属表面产生的微喷射物质在气体中的输运过程.提出采用散体颗粒分布代替微喷初始状态,基于气体-颗粒两相流模型对微喷混合现象进行了模拟研究.数值模拟给出了微喷混合的动力学演化过程,分析了初始气体压力和颗粒尺寸因素对混合层的影响规律;在数值模拟中发现了微喷颗粒的气动破碎现象,这可导致颗粒尺度明显减小,成为影响微喷混合演化性质的重要物理因素.本文模拟结果与相关实验结果取得一致,初步表明,气粒两相流模型是模拟微喷混合过程的一种有效方法.     

用高速摄影和脉冲同轴全息照相联合诊断微射流

 针对强冲击载荷下金属材料的微物质喷射中微射流的实验研究,提出了高速摄影与脉冲同轴全息照相联合诊断的测试方案,并组建了由微射流产生装置、高速摄影系统、脉冲同轴全息照相系统和高精度时序控制同步系统组成的测试系统。动态实验结果表明,高速摄影和脉冲同轴全息照相联合诊断微射流能在一次实验获得微射流的发展图像和微射流头部低动态模糊图像。     

激光驱动单颗粒与气体混合的实验研究

利用激光驱动技术对微小颗粒进行加载,能够获得较高的颗粒速度,可能成为高速气相流场中气固两相流研究的有效实验手段。利用激光驱动微小金属颗粒模拟高速运动的物体,采用驱动靶优化设计、激光光束调节等方法控制颗粒加速过程,并利用高时空分辨率、高精度瞬态实验诊断技术获取高速颗粒的瞬态物理图像。研究表明,该方法能够有效地发射金属颗粒并获取清晰的高速颗粒物理图像,建立的实验、诊断手段可为进一步开展微喷混合、超燃发动机混合、颗粒高速碰撞以及工业粉尘爆炸等相关研究奠定基础。     

冲击波作用下微米尺度金属颗粒群的动力学行为

基于平面化爆驱动飞片高压加载技术和激光测速技术,研究了冲击波加载不同粒径锡颗粒群的微喷射行为以及在空气中的减速规律.实验结果表明,锡颗粒的最快喷射速度随粒径增大而显著增大.通过对微喷射形成过程的三维光滑粒子流体动力学方法数值模拟发现,大粒径锡颗粒之间存在较大的空隙结构,冲击波与空隙结构的相互作用诱导产生高速汇聚射流,空隙结构越大对应的喷射速度也越高.此外,通过研究不同粒径颗粒在复杂流场中的减速规律,进一步深化了对微喷射破碎后的颗粒尺度状态以及混合输运特性的认识.研究结果对于预测和分析冲击波加载微米颗粒群的微喷混合特性具有一定价值.     

微喷加载装置中爆轰波阵面的测量

 根据金属材料微喷射激光全息诊断技术的要求,提出了一种测量微喷加载装置中爆轰波波前形状的实验方法,利用快响应光纤探针阵列来测量传爆药柱加载飞片的冲击波波前形状,并根据所得的实验数据用计算机模拟出爆轰波波前的形状,给出冲击波到达飞片上表面的时间分散性曲线。     

冲击载荷下金属材料的微结构-加载特性-层裂响应关系概述

鉴于冲击载荷下金属材料的变形损伤具有微结构和加载特征的依赖性,对国内外有关层裂现象的研究进展进行了简要梳理与总结。概述了晶粒尺寸、织构、晶界类型、相界和元素偏析带等结构对金属材料变形损伤的影响,重点阐述了脉冲宽度、应变率和峰值应力等加载特征对金属材料层裂强度的耦合作用,为了解冲击载荷下金属材料微结构、加载特征与变形损伤行为之间的关系提供参考。     

强激光驱动爆炸与冲击效应

随着高功率密度激光技术的快速发展,强激光驱动的爆炸与冲击效应逐渐引起国内外学者的广泛关注。对强激光诱导爆炸与冲击效应研究进展进行了综述,包括强激光诱导爆炸载荷特征与相似律,强激光对材料表面冲击强化处理,强激光冲击诱导材料相变动力学行为,以及利用强激光驱动微弹道冲击等方面的研究进展,并指出了强激光诱导爆炸与冲击效应研究的发展趋势和未来需要解决的关键科学问题。     

Guided-Wave Two-Dimensional Acousto-Optic Scanner Using Proton-Exchanged Lithium Niobate Waveguide

Two-dimensional scanning of a 0.6328 mum guided-light beam has been realized using noncolinear acousto-optic (AO) coplanar Bragg diffraction together with colinear AO guided-mode to substrate radiation-mode conversion in a Z-cut Xpropagation LiNbO3 proton-exchanged (PE) waveguide. The two surface acoustic (SAW) waves utilized are at the center frequencies of 500 and 200 MHz, propagating in the Y and X axes, respectively. Two-dimensional scanning of approximately 720 resolvable light beam spots, namely, 18 40 (horizontal vertical) scanning, has been demonstrated using a light beam of 1.0 mm aperture. The total number of resolvable beam spots can be greatly increased from 720 by simply utilizing SAW transducers of larger bandwidth and a light beam of greater aperture. It should also be possible to significantly increase the diffraction efficiency from 3 % by optimizing the parameters of the PE waveguide and the SAWs.     

Effect ofγ-radiation on the spectral luminescence characteristics of impure cadmium tungstate crystals

Results of a study of the effect of γ-radiation on the spectral luminescence properties of cadmium tungstate crystals doped with silver, bismuth, and molybdenum cations are presented. Spectral characteristics of the nondnnnoped crystals are briefly described. Absorption and photo and X-ray luminescence spectra of the crystals taken before and after exposure to γ-radiation (5.5·10⁴ Gy) are compared. It is found that the spectral characteristics of the crystals doped with silver, bismuth, and molybdenum cations do not change markedly after the exposure. The relation between the type of impurity-induced defects, individual characteristics of the impurity cations, and the character of the effect of γ-radiation on the spectral luminescence properties of impure crystals is analyzed (preliminarily). Translated from Zhurnal Prikladnoi Spektroskopii, Vol. 64, No. 1, pp. 55–60, January–February, 1997.     

Femtosecond Transform-Limited Pulse Generation by Compensating for the Linear Chirp of SPM Spectra in Dispersion Shifted Fibers

A simple technique of pulse compression, based on the linear chirp compensation of self-phase modulation (SPM) spectra in dispersion shifted fibers, is demonstrated. The optimization procedure is carried out, for a short span of a single-mode fiber, using a parabolic law, which describes the behavior of the squared output pulse width versus the pump peak power in the case of Gaussian pulses. The experimental results give a minimum pulse duration of 233 fs, which is in good agreement with the model. Shorter and coherent pulses, down to 90 fs, have been obtained by inserting an interference filter at the optical output.     

Sorting of bending magnets for the SSRF booster

The Shanghai Synchrotron Radiation Facility(SSRF)booster ring,a full energy injector for the storage ring,is deigned to accelerate the electron beam energy from 150MeV to 3.5GeV that demands high extraction efficiency at the extraction energy with low beam loss rate when electrons are ramping.Closed orbit distortion(COD)caused by bending magnet field uniformity errors which affects the machine performance harmfully could be effectively reduced by bending magnet location sorting.Considering the affections of random errors in measurement,both ideal sorting and realistic sorting are studied based on measured bending magnet field uniformity errors and one reasonable combination of bending magnets which can reduce the horizontal COD by a factor of 5is given as the final installation sequence of the booster bending magnets in this paper.     

Measurement of nonlinear coefficient of optical fiber based on small chirped soliton transmission

We measure the waveform and phase curves of short optical pulses before and after transmission over different lengths of fibers by use of the pulse analyzer with the frequency-resolved optical gating (FROG),and numerically simulate pulse evolution under the experimental conditions.The nonlinear coefficient of the fiber is given by comparing the experimental results with the numerical ones.Difference between the experiment and numerical simulation is analyzed.     

Resonance scattering of canonical elastic shells in absorbing fluid medium

Resonance scattering of elastic spherical shell and cylindrical shell while the surrounding fluid medium has absorption is studied. The normal mode solution derived using exact elastic theory and the separation of variables is still applicable. However, the scattering form function has to be modified for the absorbing medium, otherwise the unreasonable result would be obtained. The backscattering form function in the absorbing medium is redefined, and the form function of elastic spherical and cylindrical shell with vacuum or solid matter filled is calculated in various absorption conditions. The results show that the absorption of surrounding fluid leads to notable attenuation of the coincidence resonances in the mid-frequency, but it has a little influence on the low-frequency resonance scattering induced by the filler inside the shell.     

Single-beam self-referenced phase-sensitive surface plasmon resonance sensor with high detection resolution

A versatile and low-cost single-beam self-referenced phase-sensitive surface plasmon resonance(SPR)sensing system with ultra-high resolution performance is presented.The system exhibits a root-mean-square phase fluctuation of ±0.0028.over a period of 45 min.i.e.a resolution of±5.2×10-9 refractive index units.The enhanced performance has been achieved through the incorporation of three design elements:a true single-beam configuration enabling complete self-referencing so that only the phase change associated with SPR gets detected,a differential measurement scheme to eliminate spurious signals not related to the sensor response,and the elimination of retardation drifts by incorporating temperature stabilization in the liquid crystal phase modulato .Our design should bring the detection sensitivity of non-labeling SPR biosensing closer to that achievable by conventional fluorescence-based techniques.     

Influences of SiO2 protective layers and annealing on the laser-induced damage threshold of Ta2O5 films

Ta2O5 films are prepared on BK7 substrates with conventional electron beam evaporation deposition.The effects of SiO2 protective layers and annealing on the laser-induced damage threshold (LIDT) of the films are investigated.The results show that SiO2 protective layers exert little influence on the electric field intensity(EFI)distribution,microstructure and microdefect density but increase the absorption slightly.Annealing iS effective on decreasing the microdefect density and the absorption of the films.Both SiO2 protective layers and annealing are beneficial to the damage resistance of the films and the latter is more effective to improve the LIDT.Moreover,the maximal LIDT of Ta2O5 films is achieved by the combination of SiO2 protective layers and annealing.     

A stereo matching algorithm using multi-peak candidate matches and geometric constraints

Gray cross correlation matching technique is adopted to extract candidate matches with gray cross correla- tion coefficients less than some certain range of maximal correlation coefficient called multi-peak candidate matches. Multi-peak candidates are extracted corresponding to three closest feature points at first. The corresponding multi-peak candidate matches are used to construct the model polygon. Correspondence is determined based on the local geometric relations between the three feature points and the multi-peak candidates. The disparity test and the global consistency checkout are applied to eliminate the remaining ambiguous matches that are not removed by the local geometric relational test. Experimental results show that the proposed algorithm is feasible and accurate.