Nonrigid group theory for 1,3,5‐trimethylbenzene

Using nonrigid group theory, the full nonrigid (f‐NRG) group of 1,3,5‐trimethylbenzene (TMB) is shown to be isomorphic to the group S₃[C₃] = C₃ S₃ of order 162, where denotes the wreath product of groups, and C₃ is the cyclic group of order three and S₃ is the symmetric group of order six on three letters. This group has 22 conjugacy classes and irreducible representations. The character table of the full nonrigid TMB is then derived for the first time. © 2006 Wiley Periodicals, Inc. Int J Quantum Chem, 2007     

Reaction of 4-oxoalkane-1,1,2,2-tetracarbonitriles with 1,3,5-trlaryl-2,4-diaza-1,4-pentadienes

2-Aryl-1,2,3,4-tetrahydropyridine-3,3,4,4,-tetracarbonitriles and 1,3,5-triaryl-9-oxo-1,2,3,4b,5,6,8a,9-octahydropyrido[3,4:3,4]pyrrolo[1,2-a][1,3,5]triazine-4b,8a-dicarbonitriles are formed by the reaction of 4-oxoalkane-1,1,2,2-tetracarnonitriles with 1,3,5-triaryl-2,4-diaza-1,4-pentadienes depending on the solvent used.Chuvash State University, Cheboksary 428015. Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 10, pp. 1395–1409, October, 1996. Original article submitted October 2, 1996.     

An investigation of Staudinger reactions involving cis-1,3,5-triazidocyclohexane and tri(alkylamino)phosphines

The reaction of 1,3,5-cis-triazidocyclohexane with the electron-rich tris(dialkylamino)phosphines P(NMe(2))(3) (1) and N(CH(2)CH(2)NMe)(3)P (2b) in acetonitrile for 3 h furnished the corresponding tris-phosphazides 1,3,5-cis-(R(3)PN(3))(3)C(6)H(9), 3a (R(3)P = 1) and 3b (R(3)P = 2b), in 90% and 92% yields, respectively. The same reaction with the relatively electron-poor tris(dialkylamino)phosphine MeC(CH(2)NMe)(3)P (4) for 2 days gave the tris-iminophosphorane, 1,3,5-cis-(R(3)PN)(3)C(6)H(9), 5a (R(3)P = 4), in 60% yield. Compound 3b is a thermally stable solid that did not lose dinitrogen when refluxed in toluene for 24 h or when heated as a neat sample at 100 degrees C /0.5 Torr for 10 h. By contrast, tris-phosphazide 3a decomposed to the tris-iminophosphorane 1,3,5-cis-(R(3)PN)(3)C(6)H(9), 5b (R(3)P = 1), in 3 h in quantitative yield upon heating to 100 degrees C in toluene. Factors influencing the formation of the phosphazides or the iminophosphoranes in these reactions are discussed. The reaction of 3b with 4 equiv of benzoic acid gave [N(CH(2)CH(2)NMe)(3)P=NH(2)]PhCO(2) ([6bH]PhCO(2)) in quantitative yield along with benzene (56% yield) and dinitrogen. The same reaction with 3a gave [(Me(2)N)(3)P=NH(2)]PhCO(2) ([7aH]PhCO(2)) (quantitative yield), benzene (15% yield), and dinitrogen(.) Treatment of [6bH]PhCO(2) with KO(t)Bu afforded N(CH(2)CH(2)NMe)(3)P=NH (6b) in 40% overall yield. Compound 6b upon treatment with PhCH(2)CH(2)Br produced [6bH]Br in 90% yield along with styrene. The new compounds were characterized by analytical and spectroscopic methods, and selected compounds (3b, 5a, and [6bH]Br) were structured by X-ray crystallography. A special feature of 3b is its capability to function as a starting material for 6b, which was not accessible by other synthetic routes.     

Crystal Structures and Packing of 2,4,6-tris(4-Fluorophenoxy)-1,3,5-triazine and 2,4,6-tris(3,4-Dimethylphenoxy)-1,3,5-triazine. New Materials for Octupolar Nonlinear Optics

The crystal structures and packing of 2,4,6-tris(4-fluorophenoxy)-1,3,5-triazine and 2,4,6-tris(3,4-dimethylphenoxy)-1,3,5-triazine are discussed. These structures have been determined as a continuation of a series of octupolar NLO materials we have been investigating. The crystal structures are characterized by C–H...F and C–H... hydrogen bonds, respectively. A characteristic of these triazine structures is the presence of dimeric Piedfort Units (PU) that are extended into more elaborate two-dimensional (2-D) networks. The structure of the fluoro derivative is compared with that of the corresponding unsubstituted and chloro/bromo-substituted derivatives. The structure of the dimethyl triazine is compared with that of the corresponding 4-methyl derivative. The noncentrosymmetric nature of the dimethyl derivative was confirmed by a powder SHG signal at 1.064 m of the order of 0.5 × KDP. Interestingly, the dimethyl derivative studied here is isostructural with the corresponding 4-methyl triazine. This H/Me isostructurality is shown to be an uncommon phenomenon by an analysis with the CSD.     

The chemistry of 4-hydrazino-7-phenylpyrazolo[1,5-a] -1,3,5-triazines

The reaction of 4-hydrazino-7-phenylpyrazolo[1,5-a]-1,3,5-triazine ( 4 ) with nitrous acid gave 8-phenyltetrazolo[1,5-e]pyrazolo[1,5-a]-1,3,5-triazine ( 5b ), which was determined by pmr and ir spectra to be in equilibrium with 4-azido-7-phenylpyrazolo[1,5-a]-1,3,5-triazine ( 5a ). The equilibrium between the tetrazolo ( 5b ) and azido ( 5a ) forms was studied by pmr and an attempt was made to determine if substituents in the pyrazole nucleus could sufficiently stabilize the tricyclic tetrazolo form ( 5b ) over the bicyclic azido form ( 5a ). Thermal degradation of 5 (a ? b) in an aprotic solvent gave 4-amino-7-phenylpyrazolo[1,5-a]-1,3,5-triazine ( 7 ), indicating the probability of a nitrene mechanism involved in the decomposition. Heating 5 in aqueous base gave both 7 and the “hydroxy” analog, 7-phenylpyrazolo[1,5-a]-1,3,5-triazin-4(3H)one ( 6 ), further substantiating the existence of a nitrene intermediate with a competing nucleophilic displacement of the azido group by a hydroxyl group. Cyclization of 4 with diethoxymethylacetate (DEMA) gave 8-phenyl-s-triazolo[4,3-e]pyrazolo[1,5-a]-1,3,5-triazine ( 8 ), which underwent thermal rearrangement to 8-phenyl-s-triazolo[2,3-e]pyrazolo[1,5-a]-1,3,5-triazine ( 9 ). Acid catalyzed ring opening of 9 with formic acid gave 3-N-formamido-5-phenyl-2(2-s-triazolyl)pyrazole ( 10 ). The failure of 10 to recyclize to 9 with the resultant loss of water, supported the theory that the rearrangement of 8 to 9 might occur simply as a concerted, thermally induced “anhydrous” rearrangement rather than via a covalently hydrated intermediate or a Dimroth type mechanism (in the base catalyzed rearrangement).     

Kinetic and equilibrium study of gas-phase interconversions of 1,3,6-cyclooctatriene, 1,3,5-cyclooctatriene and bicyclo[4.2.0]octa-2,4-diene

The gas-phase equilibrium and rate constants for the isomerizations of 1,3,6-cyclooctatriene (136COT) to 1,3,5-cyclooctatriene (135COT) [reaction (1)] and bicyclo[4.2.0]octa-2,4-diene (BCO) to 135COT [reaction (-2)] have been measured between 390 and 490 K and between 330 and 475 K, respectively. The rate constant of reaction (1) obeys the Arrhenius equation The corresponding equilibrium constant is given by the van′t Hoff equation The strain energy of the 136COT ring is calculated to be 31.7 kJ/mol, based on the known value of 37.2 kJ/mol for 135COT, and ΔH(298 K) for gaseous 136COT is 196.3 kJ/mol. The rate constant of reaction (-2) obeys the Arrhenius equation The equilibrium constant for 135COT ? BCO fits the van′t Hoff equation The strain energy of the BCO skeleton is calculated to be 108.3 kJ/mol, and ΔH(298 K) for gaseous BCO is 183.3 kJ/mol.     

Syntheses and Crystal Structures of 1,5-Disubstituted 1,3,5-Hexahydro-triazine-2-（N-nitro）imines

The title compounds,C9H13ClN6O2S 1 and C15H17ClN6O2S 2,were synthesized and structurally characterized by elemental analysis,IR,1H NMR spectra and single-crystal X-ray diffraction.Compound 1 is in the monoclinic system,space group P21/c with a=13.7711(5),b=10.3883(4),c=9.7623(2),V=1344.47(8)3,Dc=1.506 g/cm3,C9H13ClN6O2S,Mr=304.76,F(000)=632,μ=0.448 mm-1,Z=4,S=1.084,R=0.0497 and wR=0.1328 for 2640 unique reflections(Rint=0.0787) with 2089 observed ones(I2σ(I)).Compound 2 belongs to the monoclinic system,space group P21/n with a=8.3828(5),b=14.5285(7),c=14.2456(4),V=1729.74(14)3,Dc=1.462 g/cm3,C15H17ClN6O2S,Mr=380.86,F(000)=792,μ=0.364 mm-1,Z=4,S=1.057,R=0.0598 and wR=0.1582 for 3384 unique reflections(Rint=0.0469) with 2833 observed ones(I2σ(I)).Compounds 1 and 2 are homologues and stabilized by intermolecular and intramolecular hydrogen bonds.Moreover,compound 2 containing C(2)-H(2)…π(thiazole) interaction is more stable than 1.     

Thermal unimolecular decomposition of 1,3,5-trioxane: Comparison of theory and experiment

The unimolecular decomposition of 1,3,5-trioxane into three formaldehyde molecules has been studied thermally at eight temperatures between 523 and 603 K using mixtures highly diluted with Ar. Under these conditions, the only decomposition product detected by means of FTIR analysis was formaldehyde. At 588 K, the effect of total pressure was examined between 25 and 800 torr; a noticeable decline in the first-order rate constant was observed only at pressures below 500 torr. A least-squares analysis of the measured high-pressure, first-order rate constants leads to This result differs significantly from earlier data on the reaction, but it compares closely with the theoretical value: computed with the transition-state theory using the molecular and TST parameters predicted by the BAC–MP4 method.     

CRYSTAL STRUCTURE OF ERBIUM（Ⅲ）COMPLEX WITH 1，3，5—BENZENETRICARBOXYLIC ACID

<正> The crystal structure of erbium (Ⅲ) complex of 1,3,5-benzenetricar-boxylic acid is reported. The title compound crystallizes in triclinic space group of P1 and cell parameters a = 7. 649(3) ,b= 9. 859(2) ,c= 11. 171 (3) A ;α= 106. 90(2),β= 104. 40(3),γ=107. 20(3)°;Z = 2;V = 716. 5A3.The final R and Rw are 0. 0328 and 0. 0338 respectively. The rare earth ion is nine-coordinated by four oxygen atoms from two carboxylato groups in two 1, 3, 5- benzenetricarboxylato groups and five aqua molecules, forming a distorted monocapped square antiprism. The Er-O distances fall in the range of 2. 327-2. 627A.     

Synthesis and central nervous system stimulant activity of 5,8-methanoquinazolines fused with imidazole,thiadiazole, pyrimidine and 1,3,5-triazine

5,8-Methanoquinazolines fused with imidazoles 4a-4b , thiadiazoles 5–6 , pyrimidines 7, 9, 11 and 12 , and 1,3,5-triazine 13 were prepared starting from (5R,8S)-2-amino-8,9,9-trimethyl-5,6,7,8-tetrahydro-5,8-methanoquinazoline 3 . Most compounds possessed central nervous system stimulant activities.     

Synthesis of 2,4,6-triphenyl-1,3,5-triazine

Conclusions A study was made of the cyclotrimerization of benzonitrile in chlorosulfonic acid and the optimum conditions were ascertained for the formation of 2,4,6-triphenyl-1,3,5-triazine.Translated from Izvestiya Akademii Nauk SSSR, Seriya Khimicheskaya, No. 9, pp. 2105, September, 1972.     

Bildung siliciumorganischer Verbindungen. LVI. Reaktionen Si- und C-chlorierter 1,3,5-Trisilapentane mit CH3MgCl

Formation of Organosilicon Compounds. LVI. Reactions of Si- and C-Chlorinated 1,3,5-Trisilapentanes with CH₃MgCl (Cl₃Si? CCl₂)₂SiCl₂ (1) reacts with an excess of meMgCl (me = CH₃) forming me₃Si? C?C? Sime₃ (2), Sime₄, H₂C?C(Sime₃)[CH(Sime₃)₂] (3) as main products and (me₃Si)₂C? CH(Sime₃) and as by-products. The cleavage reaction of (1) to (2) and (3) does not occur when the meMgCl-concentration is lowered. The reaction is started by the formation of a GRIGNARD reagent at a CCl-group in compound (1). Cl₃Si? CCl₂? SiCl₂? CH₂? SiCl₃ forms with ; me₃Si? CCl₂? SiCl₂? CHCl? SiCl₃ forms (me₃Si)₂C?CH(Sime₃). A reaction sequence is given.     

Bildung siliciumorganischer Verbindungen. XXXXI. Synthese und Reaktionen des 1,1,3,3,5,5-Hexamethyl-1,3,5-trisila-6-methylen-cyclohexan und des 1,1,3,3,5,5-Hexamethyl-1,3,5-trisila-cyclohepten-6

The compounds (a) and (b) have been synthesized, and their reactions with Br₂, HBr, HSiCl₃ and HSime₂Br (me = CH₃) are described. The synthesis of (a) and (b) can be achieved by cycloaddition of Hme2Si? CH₂? Sime₂? CH₂? Sime₂? C?CH (c). (a) is also formed by cyclisation of (d) and (e) with Li. (d) and (e) can be prepared by ?SiH addition to HC?C? Si? compounds (cat. H₂PtCl₆ · 6 H₂O). With Br₂ (a) yields (f). whereas (b) yields the trans compound (g). The subsequent reactions of (f) and (g) with Br₂ and their decomposition via β-elimination to (i) (j) are reported. Both (a) and (b) react with HBr to (h), changing the size of the ring in the case of (b). (h) decomposes via β-elimination. HSiCl₃ and HSime₂Br addition to (a) yields 1,1,2-trisila-ethane derivates. All intermediate compounds of these syntheses and their NMR data are given.     

Synthesis and Crystal Structure Analysis of 2-Amino-4,6-bis（diphenoxyl phosphoramide）-1,3,5-triazine

A disubstituted triazine compound, namely, 2-amino-4,6-bis(diphenoxyl phosphorramide)-1,3,5-triazine, which is an inherent flame retardant monomer, was synthesized specifically, and its structure was characterized by using NMR spectrum and X-ray single-crystal diffraction. Unit cell parameters: space group P21/c, Z=4, a=8.7494(15), b=27.518(5), c=12.511(2),β=109.323(16) , Z=4, V=2842.7(9)β3 , Dc=1.380 g/cm3 , F(000)=1224 and Mr=590.46. All the atoms are in the general positions.     

Design,Synthesis and Biological Evaluation of 1,3,5-Triazine Derivatives Targeting hA1 and hA3 Adenosine Receptor

Adenosine mediates various physiological activities in the body. Adenosine receptors (ARs) are widely expressed in tumors and the tumor microenvironment (TME), and they induce tumor proliferation and suppress immune cell function. There are four types of human adenosine receptor (hARs): hA₁, hA_2A, hA_2B, and hA₃. Both hA₁ and hA₃ AR play an important role in tumor proliferation. We designed and synthesized novel 1,3,5-triazine derivatives through amination and Suzuki coupling, and evaluated them for binding affinities to each hAR subtype. Compounds 9a and 11b showed good binding affinity to both hA₁ and hA₃ AR, while 9c showed the highest binding affinity to hA₁ AR. In this study, we discovered that 9c inhibits cell viability, leading to cell death in lung cancer cell lines. Flow cytometry analysis revealed that 9c caused an increase in intracellular reactive oxygen species (ROS) and a depolarization of the mitochondrial membrane potential. The binding mode of 1,3,5-triazine derivatives to hA₁ and hA₃ AR were predicted by a molecular docking study.     

SYNTHESIS AND CRTYSTAL STRUCTURE OF LUTETIUM (Ⅲ) COMPLEX WITH 1,3,5-BENZENETRICARBOXYLIC ACID

<正> LuC9H3O6(H2O)5·4H2O, Mr = 528. 3, monoclinic, C2/c, a = 14. 673(3), b=16.930(4), c= 14. 383(4)(?) , β=118.77(2)°, Z = 8, 7 = 3132(1) (?)3, Dc = 2. 24g/cm3, μ(MoKα) = 67.0cm-1, F(000) = 2064, R = 0. 052 for 4080 observed reflections. The Lutetium ion is eight-coordinated by three oxygen atoms, one from a 1, 3, 5,-benzenetricarboxylate ligands, two from another one, and five aqua ligands,forming a polymeric zigzag chain along the [101] direction. The Lu -O distances fall in the range of 2. 229 -2. 404(?).     

Synthesis and crystallographic studies of two new 1,3,5‐triazines

The synthesis and characterization of two new 1,3,5‐triazines containing 2‐(aminomethyl)‐1H‐benzimidazole hydrochloride as a substituent are reported, namely, 2‐{[(4,6‐dichloro‐1,3,5‐triazin‐2‐yl)amino]methyl}‐1H‐benzimidazol‐3‐ium chloride, C₁₁H₉Cl₂N₆⁺·Cl^? ( 1 ), and bis(2,2′‐{[(6‐chloro‐1,3,5‐triazine‐2,4‐diyl)bis(azanediyl)]bis(methylene)}bis(1H‐benzimidazol‐3‐ium)) tetrachloride heptahydrate, 2C₁₉H₁₈ClN₉²⁺·4Cl^?·7H₂O ( 2 ). Both salts were characterized using single‐crystal X‐ray diffraction analysis and IR spectroscopy. Moreover, the NMR (¹H and ¹³C) spectra of 1 were obtained. Salts 1 and 2 have triclinic symmetry (space group P) and their supramolecular structures are stabilized by hydrogen bonding and offset π–π interactions. In hydrated salt 2 , the noncovalent interactions yield pseudo‐nanotubes filled with chloride anions and water molecules, which were modelled in the refinement with substitutional and positional disorder.     

1,3,5-triisopropylbenzene diffusion in polystyrene solutions

Self-diffusion coefficients of 1,3,5-triisopropylbenzene (TIB) in binary solutions with polystyrene and ternary mixtures comprised of TIB, toluene, and polystyrene have been measured by static gradient nuclear magnetic resonance (SG-NMR) techniques. These data, as well as mutual-diffusion coefficient data measured by capillary column inverse gas chromatography (CCIGC), have been analyzed here with the Vrentas-Duda free-volume diffusion model. Although both binary and ternary diffusion coefficient data can be accurately correlated with the model, the results contradict those of an earlier investigation, which suggested that TIB diffuses as a single unit in polystyrene solutions. The new data suggest that either: 1) TIB diffuses by piece-wise displacements in polystyrene solutions, or 2) a diffusive activation energy ceiling value has been reached. The implications of both possibilities are discussed in the context of established free-volume principles. © 1996 John Wiley & Sons, Inc.     

A study of the sensitivity and decomposition of 1,3,5-trinitro-2-oxo-1,3,5-triazacyclo-hexane

The thermal decomposition and thermal stability of 1,3,5-trinitro-2-oxo-1,3,5-triazacyclohexane (keto-RDX or K-6) was studied. The keto-RDX synthesis is described, mass spectra (electron impact (70 eV) and chemical ionization) similar to RDX spectra registered under identical conditions are presented, and mass spectroscopy fragmentation paths are proposed. The LI-MS (laser induced/mass spectroscopic) results imply that the first step in the decomposition of keto-RDX is the elimination of NO₂ or HONO and subsequent breakdown of the triazacyclohexane ring. The thermal stability, activation energy (E_a = 140 kJ mol⁻¹), and frequency factor (K₀ = 9 × 10⁹ s⁻¹) in the temperature interval 90-120°C were measured using chemiluminescence (NO detection only). The activation energy was also determined from DSC data using the ASTM method E 698-79, and was found to be 280 kJ mol⁻¹ with a frequency factor of 7.0 × 10²⁹ s⁻¹ in the temperature interval 175-200°C. Microcalorimetry, drop-weight test, friction test, and ignition temperature (Wood's metal bath) measurements were also conducted. Quantum mechanical calculations (semi-empirical method with PM3 set at the unrestricted Hartree-Fock level) were conducted to correlate the sensitivity and thermal decomposition with those of RDX. No significant differences in bond-breaking energies for RDX and keto-RDX were found. Conclusions drawn from the experiments are that the decomposition of keto-RDX is auto-catalytic, and that the sensitivity of keto-RDX is not connected with the initial bond-breaking step. More than one method for measuring the risk involved in handling an explosive is necessary since the sensitivity depends on different stages in the decomposition.