等浓度的氯化铵和硫酸铵溶液哪个pH高

有中学化学参考资料题:0.10 mol/L的NH4Cl和(NH4)2SO4溶液哪个pH值高?这似乎是个中学生可做的简单题目,仔细考虑不是如此.如果简单地认为盐酸和硫酸都是强酸,而硫酸是二元酸,硫酸铵溶液中铵盐浓度为0.20 mol/L,那么NH4Cl溶液pH高,那是不妥的.硫酸是二元酸,第一个氢离子能完全电离,第二个氢离子部分电离,如此考虑情况怎么样呢?是不是答案发生变化?这要通过计算来说明.     

Enhanced efficiency and stability in Sn-based perovskite solar cells with secondary crystallization growth

The conversion efficiencies reported for Tin(Sn)halide-based perovskite solar cells(PSCs)fall a large gap behind those of lead halide-based PSCs,mainly because of poor film quality of the former.Here we report an efficient strategy based on a simple secondary crystallization growth(SCG)technique to improve film quality for tin halide-based PSCs by applying a series of functional amine chlorides on the perovskite surface.They were discovered to enhance the film crystallinity and suppress the oxidation of Sn²⁺remarkably,hence reduce trap state density and non-irradiative recombination in the absorber films.Furthermore,the SCG film holds the band levels matching better with carrier transport layers and herein favoring charge extraction at the device interfaces.Consequently,a champion device efficiency of 8.07% was achieved alo ng with significant enhancements in VOC and JSC,in contrast to 5.35% of the control device value.Moreover,the SCG film-based devices also exhibit superior stability comparing with the control one.This work explicitly paves a novel and general strategy for developing high performance lead-free PSCs.     

Energy level engineering of charge selective contact and halide perovskite by modulating band offset:Mechanistic insights

Mixed cation and anion based perovskites solar cells exhibited enhanced stability under outdoor conditions,however,it yielded limited power conversion efficiency when TiO₂ and Spiro-OMeTAD were employed as electron and hole transport layer(ETL/HTL)respectively.The inevitable interfacial recombination of charge carriers at ETL/perovskite and perovskite/HTL interface diminished the efficiency in planar(n-i-p)perovskite solar cells.By employing computational approach for uni-dimensional device simulator,the effect of band offset on charge recombination at both interfaces was investigated.We noted that it acquired cliff structure when the conduction band minimum of the ETL was lower than that of the perovskite,and thus maximized interfacial recombination.However,if the conduction band minimum of ETL is higher than perovskite,a spike structure is formed,which improve the performance of solar cell.An optimum value of conduction band offset allows to reach performance of 25.21%,with an open circuit voltage(VOC)of 1231 mV,a current density JSC of 24.57 mA/cm² and a fill factor of 83.28%.Additionally,we found that beyond the optimum offset value,large spike structure could decrease the performance.With an optimized energy level of Spiro-OMeTAD and the thickness of mixed-perovskite layer performance of 26.56% can be attained.Our results demonstrate a detailed understanding about the energy level tuning between the charge selective layers and perovskite and how the improvement in PV performance can be achieved by adjusting the energy level offset.     

A new strategy to access Co/N co-doped carbon nanotubes as oxygen reduction reaction catalysts

Carbon nanotubes(CNTs),as one-dimensional nanomaterials,show great potential in energy conversion and storage due to their efficient electrical conductivity and mass transfer.However,the security risks,time-consuming and high cost of the preparation process hinder its further application.Here,we develop that a negative pressure rather than a following gas environment can promote the generation of cobalt and nitrogen co-doped CNTs(Co/N-CNTs) by using cobalt zeolitic imidazolate framework(ZIF-67) as a precursor,in which the negative pressure plays a key role in adjusting the size of cobalt nanoparticles and stimulating the rearragement of carbon atoms for forming CNTs.Importantly,the obtained Co/N-CNTs,with high content of pyridinic nitrogen and abundant graphitized structure,exhibit superior catalytic activity for oxygen reduction reaction(ORR) with half-wave potential(E_1/2) of 0.85 V and durability in terms of the minimum current loss(2%) after the 30,000 s test.Our development provides a new pathway for large-scale and cost-effective preparation of metal-doped CNTs for various applications.     

Recent Advances of Pure Organic Room Temperature Phosphorescence Materials for Bioimaging Applications

Bioimaging,as a powerful and helpful tool,which allows people to investigate deeply within living organisms,has contributed a lot for both clinical theranostics and scientific research.Pure organic room temperature phosphorescence(RTP)materials with the unique features of ultralong luminescence lifetime and large Stokes shift,can efficiently avoid biological autofluorescence and scattered light through a time-resolved imaging modality,and thus are attracting increasing attention.This review classifies pure organic RTP materials into three categories,including small molecule RTP materials,polymer RTP materials and supramolecular RTP materials,and summarizes the recent advances of pure organic RTP materials for bioimaging applications.     

Stabilizing High-voltage Cathode Materials for Next-generation Li-ion Batteries

The pressing demand for high-energy/power lithium-ion batteries requires the deployment of cathode materials with higher capacity and output voltage.Despite more than ten years of research,high-voltage cathode mate-rials,such as high-voltage layered oxides,spinel LiNi0.5Mn1.5O4,and high-voltage polyanionic compounds still cannot be commercially viable due to the instabilities of standard electrolytes,cathode materials,and cathode electrolyte interphases under high-voltage operation.This paper summarizes the recent advances in addressing the surface and interface issues haunting the application of high-voltage cathode materials.The understanding of the limitations and advantages of different modification protocols will direct the future endeavours on advancing high-energy/power lithium-ion batteries.     

Conformational Properties of Comb-shaped Polyelectrolytes with Negatively Charged Backbone and Neutral Side Chains Studied by a Generic Coarse-grained Bead-and-Spring Model

A generic coarse-grained bead-and-spring model,mapped onto comb-shaped polycarboxylate-based(PCE)superplasticizers,is developed and studied by Langevin molecular dynamics simulations with implicit solvent and explicit counterions.The agreement on the radius of gyration of the PCEs with experiments shows that our model can be useful in studying the equilibrium sizes of PCEs in solution.The effects of ionic strength,side-chain number,and side-chain length on the conformational behavior of PCEs in solution are explored.Single-chain equilibrium properties,including the radius of gyration,end-to-end distance and persistenee length of the polymer backbone,shape-asphericity parameter,and the mean span dimension,are determined.It is found that with the increase of ionic strength,the equilibrium sizes of the polymers decrease only slightly,and a linear dependenew of the persistence length of backbone on the Debye screening length is found,in good agreement with the theory developed by Dobrynin.Increasing side-chain numbers and/or side-chain lengths increases not only the equilibrium sizes(radius of gyration and mean span)of the polymer as a whole,but also the persistence length of the backbone due to excluded volume interactions.     

Suppressing trap states and energy loss by optimizing vertical phase distribution through ternary strategy in organic solar cells

Suppressing the trap-state density and the energy loss via ternary strategy was demonstrated.Favorable vertical phase distribution with donors(acceptors)accumulated(depleted)at the interface of active layer and charge extraction layer can be obtained by introducing appropriate amount of polymer acceptor N2200 into the systems of PBDB-T:IT-M and PBDB-TF:Y6.In addition,N2200 is gradiently distributed in the vertical direction in the ternary blend film.Various measurements were carried out to study the effects of N2200 on the binary systems.It was found that the optimized morphology especially in vertical direction can significantly decrease the trap state density of the binary blend films,which is beneficial for the charge transport and collection.All these features enable an obvious decrease in charge recombination in both PBDB-T:IT-M and PBDB-TF:Y6 based organic solar cells(OSCs),and power conversion efficiencies(PCEs)of 12.5%and 16.42%were obtained for the ternary OSCs,respectively.This work indicates that it is an effective method to suppress the trap state density and thus improve the device performance through ternary strategy.     

Three-dimensionalization via control of laser-structuring parameters for high energy and high power lithium-ion battery under various operating conditions

Laser-structuring is an effective method to promote ion diffusion and improve the performance of lithium-ion battery(LIB)electrodes.In this work,the effects of laser structuring parameters(groove pitch and depth)on the fundamental characteristics of LIB electrode,such as interfacial area,internal resistances,material loss and electrochemical performance,are investigated,LiNi_0.5Co_0.2Mn_0.3O₂ cathodes were structured by a femtosecond laser by varying groove depth and pitch,which resulted in a material loss of 5%-14%and an increase of 140%-260%in the in terfacial area between electrode surface and electrolyte.It is shown that the importance of groove depth and pitch on the electrochemical performance(specific capacity and areal discharge capacity)of laser-structured electrode varies with current rates.Groove pitch is more im porta nt at low current rate but groove depth is at high curre nt rate.From the mapping of lithium concentration within the electrodes of varying groove depth and pitch by laser-induced breakdown spectroscopy,it is verified that the groove functions as a diffusion path for lithium ions.The ionic,electronic,and charge transfer resistances measured with symmetric and half cells showed that these internal resistances are differently affected by laser structuring parameters and the changes in porosity,ionic diffusion and electronic pathways.It is demonstrated that the laser structuring parameters for maximum electrode performance and minimum capacity loss should be determined in consideration of the main operating conditions of LIBs.     

Mesh-like vertical structures enable both high areal capacity and excellent rate capability

In order to balance electrochemical kinetics with loading level for achieving efficient energy storage with high areal capacity and good rate capability simultaneously for wearable electronics,herein,2 D meshlike vertical structures(NiCo_2 S_4@Ni(OH)_2) with a high mass loading of 2.17 mg cm^-2 and combined merits of both 1 D nanowires and 2 D nanosheets are designed for fabricating flexible hybrid supercapacitors.Particularly,the seamlessly interconnected NiCo_2 S_4 core not only provides high capacity of 287.5 μAh cm^-2 but also functions as conductive skeleton for fast electron transport;Ni(OH)_2 sheath occupying the voids in NiCo_2 S_4 meshes contributes extra capacity of 248.4 μAh cm^-2;the holey features guarantee rapid ion diffusion along and across NiCO_2 S_4@Ni(OH)_2 meshes.The resultant flexible electrode exhibits a high areal capacity of 535.9 μAh cm^-2(246.9 mAh g^-1) at 3 mA cm^-2 and outstanding rate performance with 84.7% retention at 30 mA cm^-2,suggesting efficient utilization of both NiCo_2 S_4 and Ni(OH)_2 with specific capacities approaching to their theoretical values.The flexible solid-state hybrid device based on NiCo_2 S_4@Ni(OH)_2 cathode and Fe_2 O_3 anode delivers a high energy density of 315 μWh cm^-2 at the power density of 2.14 mW cm^-2 with excellent electrochemical cycling stability.     

H2S2的构型及其异构化反应的密度泛函理论研究

B3LYP calculations of density functional theory with the 6-311 + G（3df,2p）basis set level are used to investigate the equilibrium structures and intramolecular rearrangement reaction between the linear HSSH and branched H2SS isomers. The predicted geometrical parameters and scaled harmonic vibrational frequencies for HSSH are in good agreement with the available values experimentally. The predicted S-S and S-H bond lengths in the thiosulfoxide structure H2SS are 0.1986 and 0.1366 nm respectively and the values of 5SSH and 5HSH bond angles are 108. 3o and 89. 5o respectively. The transition-state for the unimolecular isomerization is suitably characterized by diagonalizing the matrix of energy second derivatives to determine the unique imaginary vibrational frequency and confirmed by the IRC calculation. The calculated results show that the linear structure is stable with respect to the branched form（lower 109.8 kJ/mol corrected with zero point vibrational energy）energetically. The calculated energy barrier for the direct intramolecular hydrogen atom transfer isomerization process is 190.3 kJ/mol. The kinetic results demonstrate that the isomerization is a unimolecular process,but the reaction rate is pretty slow. This agrees with the thermodynamical results. So the isomerization process should proceed via the other likely processes.     

H3PO→H2POH异构化反应的直接动力学研究

在QCISD(T)/6-311C++G(2df,2pd)//QCISD/6-311C++G(d,p)+ZPE水平上,对H3PO的异构化反应H3PO→(1)H2POH(trans)→(2)H2POH(cis)进行了计算研究.结果表明,H原子由P原子向O原子迁移反应(1)的能垒为250.0kJ/mol,是反应速率控制步骤,而O_H键绕P_O键旋转的构型转化反应(2)的能垒只为12.3kJ/mol.利用经典过渡态理论(TST)与变分过渡态理论(CVT)分别计算了反应(1)在200～2000K温度区间内的速率常数kTST和kCVT,获得了经小曲率隧道效应(SCT)及Eckart模型校正后的速率常数kTST/Eckart和kCVT/SCT.对只涉及H原子迁移的反应(1),量子力学隧道效应的影响在低温段非常明显,而变分效应对反应速率常数的影响很小.     

On the formation of phenyldiacetylene (C6H5CCCCH) and D5-phenyldiacetylene (C6D5CCCCH) studied under single collision conditions

The crossed molecular beam reactions of the phenyl and D5-phenyl radical with diacetylene (C(4)H(2)) was studied under single collision conditions at a collision energy of 46 kJ mol(-1). The chemical dynamics were found to be indirect and initiated by an addition of the phenyl/D5-phenyl radical with its radical center to the C1-carbon atom of the diacetylene reactant. This process involved an entrance barrier of 4 kJ mol(-1) and lead to a long lived, bound doublet radical intermediate. The latter emitted a hydrogen atom directly or after a few isomerization steps via tight exit transition states placed 20-21 kJ mol(-1) above the separated phenyldiacetylene (C(6)H(5)CCCCH) plus atomic hydrogen products. The overall reaction was determined to be exoergic by about 49 ± 26 kJ mol(-1) and 44 ± 10 kJ mol(-1) as determined experimentally and computationally, thus representing a feasible pathway to the formation of the phenyldiacetylene molecule in combustion flames of hydrocarbon fuel.     

A crossed beam and ab initio investigation on the formation of vinyl boron monoxide (C2H3BO; X1A') via reaction of boron monoxide (11BO; X2Σ+) with ethylene (C2H4; X1A(g))

The reaction dynamics of the boron monoxide radical ((11)BO; X(2)Σ(+)) with ethylene (C(2)H(4); X(1)A(g)) were investigated at a nominal collision energy of 12.2 kJ mol(-1) employing the crossed molecular beam technique and supported by ab initio and statistical (RRKM) calculations. The reaction is governed by indirect scattering dynamics with the boron monoxide radical attacking the carbon-carbon double bond of the ethylene molecule without entrance barrier with the boron atom. This addition leads to a doublet radical intermediate (O(11)BH(2)CCH(2)), which either undergoes unimolecular decomposition through hydrogen atom emission from the C1 atom via a tight transition state located about 13 kJ mol(-1) above the separated products or isomerizes via a hydrogen shift to the O(11)BHCCH(3) radical, which also can lose a hydrogen atom from the C1 atom. Both processes lead eventually to the formation of the vinyl boron monoxide molecule (C(2)H(3)BO; X(1)A'). The overall reaction was determined to be exoergic by about 40 kJ mol(-1). The reaction dynamics are also compared to the isoelectronic ethylene (C(2)H(4); X(1)A(g)) - cyano radical (CN; X(2)Σ(+)) system studied earlier.     

木质素模化物紫丁香酚热解机理的量子化学研究

采用密度泛函理论方法B3LYP/6-31G++(d,p),对木质素模化物紫丁香酚的热解反应机理进行了量子化学理论研究。提出了三种可能的热解反应途径,对各种反应的反应物、产物、中间体和过渡态的结构进行了能量梯度全优化。计算了各热解反应途径的标准动力学参数,分析了各种主要热解产物的形成演化机理。键离解能计算结果表明,紫丁香酚中CH₃-O键的键离解能最小,各种键离解能的大小顺序为CH₃-O < O-H < CH₃O-C_aromatic < CH₂-H < HO-C_aromatic < C_aromatic-H。在反应路径(1)中,主要热解产物是3-甲氧基邻苯二酚,其形成反应的总能垒为366.6 kJ/mol;在反应路径(2)中主要热解产物是2-甲氧基-6-甲基苯酚,其形成反应的总能垒为474.8 kJ/mol;在反应路径(3)中形成邻甲氧基苯酚的总能垒很低,为21.4 kJ/mol,这表明,在连接甲氧基的碳原子上加氢后能够有效地降低木质素芳环模化物紫丁香酚去甲氧基反应的反应能垒。     

Ab initio study on the mechanism of reaction HNCO+NH_2

Ab initio UMP2 and UQCISD(T) calculations, with 6-311G** basis sets, were performed for the titled reactions. The results show that the reactions have two product channels: NH2+ HNCO→NH3+NCO (1) and NH2+HNCO-N2H3+CO (2), where reaction (1) is a hydrogen abstraction reaction via an H-bonded complex (HBC), lowering the energy by 32.48 kJ/mol relative to reactants. The calculated QCISD(T)//MP2(full) energy barrier is 29.04 kJ/mol, which is in excellent accordance with the experimental value of 29.09 kJ/mol. In the range of reaction temperature 2300-2700 K, transition theory rate constant for reaction (1) is 1.68 × 1011- 3.29 × 1011 mL · mol-1· s-1, which is close to the experimental one of 5.0 ×1011 mL× mol-1· s-1 or less. However, reaction (2) is a stepwise reaction proceeding via two orientation modes, cis and trans, and the energy barriers for the rate-control step at our best calculations are 92.79 kJ/mol (for cis-mode) and 147.43 kJ/mol (for trans-mode), respectively, which is much higher than     

分子筛催化cis-2-丁烯的双键异构反应机理的DFT研究

基于含有两个Si和一个Al的分子筛3T簇模型, 利用密度泛函方法(DFT)研究了分子筛催化1-丁烯双键异构为cis-2-丁烯的反应机理. 在B3LYP/6-31G(d,p)计算水平上对反应各驻点进行了全优化, 并计算了反应的活化能. 研究发现, 分子筛上的酸性OH基团首先通过物理吸附靠近1-丁烯的双键, 形成了π配位复合物后, 丁烯双键的端基C原子逐渐抽取这个质子, 同时相邻酸性位的一个O原子也抽取丁烯碳链上的一个H原子, 形成吸附态的cis-2-丁烯, 最后通过脱附形成产物, 使分子筛复原, 反应按照协同反应机理发生. 计算得到的表观活化能是55.9 kJ/mol, 与实验结果接近.     

BrSSCl和SSBrCl相对稳定性的理论研究

采用量子化学中的密度泛函理论，在B3LYP／6-311 G(3df)水平上全优化得到了S2BrCl分子线型和分叉型2种异构体的平衡结构，同时对可能发生的分子内原子迁移过程的过渡态进行了考察。计算结果表明，从能量角度看，线型的BrSSCl为稳定构型。采用统计热力学及过渡态理论，研究了Z种平衡结构之间相互转化的热力学和动力学性质。根据计算结果，无论是Cl迁移还是Br迁移，分子内的原子迁移都需要较高的活化能，并且迁移速度较慢。     

Meso-2,3-二氰基-2,3-二苯基丁二酸二乙酯熔融相热异构化反应动力学及中间体EPR测定

测定了2,3-二氰基-2,β-二苯基丁二酸二乙酯meso-异构体熔融相的热异构化反应动力学及苯环对位为X(X=OCH₃,CH₃,H,Cl,NO₂)的相应二乙酯反应中间体自由基的EPR谱,自由基的结构由计算机模拟确定.结果表明,在实验温度范围内,平衡常数随温度的升高而降低.热力学数据为:ΔH_dl-meao= - 18.02 kJ/mol, ΔS_dl-meao= - 26.51 J/mol·K, ΔH^≠ = 151.78 kJ/mol, ΔS^≠ = 71.64 J/mol·K.反应机理是内消旋体的中心碳-碳键发生均裂,生成α-氰基-α-乙氧甲酰基-P-X取代苄基自由基,再重新结合时发生异构化,生成dl-异构体.     

Influence of water-protein hydrogen bonding on the stability of Trp-cage miniprotein. A comparison between the TIP3P and TIP4P-Ew water models

We report extensive replica exchange molecular dynamics (REMD) simulations on the folding/unfolding equilibrium of Trp-cage miniprotein using the Amber ff99SB all atom forcefield and TIP3P and TIP4P-Ew explicit water solvent models. REMD simulation-lengths in the 500 ns to the microsecond regime per replica are required to adequately sample the folding/unfolding equilibrium. We observe that this equilibrium is significantly affected by the choice of the water model. Compared with experimental data, simulations using the TIP3P solvent describe the stability of the Trp-cage quite realistically, providing a melting point which is just a few Kelvins above the experimental transition temperature of 317 K. The TIP4P-Ew model shifts the equilibrium towards the unfolded state and lowers the free energy of unfolding by about 3 kJ mol(-1) at 280 K, demonstrating the need to fine-tune the protein-forcefield depending on the chosen water model. We report evidence that the main difference between the two water models is mostly due to the different solvation of polar groups of the peptide. The unfolded state of the Trp-cage is stabilized by an increasing number of hydrogen bonds, destabilizing the α-helical part of the molecule and opening the R-D salt bridge. By reweighting the strength of solvent-peptide hydrogen bonds by adding a hydrogen bond square well potential, we can fully recover the effect of the different water models and estimate the shift in population as due to a difference in hydrogen bond-strength of about 0.4 kJ mol(-1) per hydrogen bond.