Layer‐by‐layer Assembled Multilayers of Graphene/Mono‐(6‐amino‐6‐deoxy)‐β‐cyclodextrin for Detection of Dopamine

Graphene/mono‐(6‐amino‐6‐deoxy)‐β‐cyclodextrin multilayer films composed of graphene sheet (GS) and mono‐(6‐amino‐6‐deoxy)‐β‐cyclodextrin (NH₂‐β‐CD) were fabricated easily by two steps. First, negatively charged graphene oxide (GO) and positively charged mono‐(6‐amino‐6‐deoxy)‐β‐cyclodextrin (NH₂‐β‐CD) were layer‐by‐layer (LBL) self‐assembled on glassy carbon electrode (GCE) modified with a layer of poly(diallyldimethylammonium chloride) (PDDA). Then graphene/mono‐(6‐amino‐6‐deoxy)‐β‐cyclodextrin (GS/NH₂‐β‐CD) multilayer films were built up by electrochemical reduction of graphene oxide/mono‐(6‐amino‐6‐deoxy)‐β‐cyclodextrin (GO/NH₂‐β‐CD). Combining the high surface area of GS and the active recognition sites on β‐cyclodextrin (β‐CD), the GS/NH₂‐β‐CD multilayer films show excellent electrochemical sensing performance for the detection of DA with an extraordinary broad linear range from 2.53 to 980.05 µmol·L^?1. This study offers a simple route to the controllable formation of graphene‐based electrochemical sensor for the detection of DA.     

A Joint Theoretical and Experimental Insight into the Electronic Structure of Chromophores Derived from 6H,12H‐5,11‐Methanodibenzo[b,f][1,5]diazocine

We report on the synthesis and electronic spectra of the chiral, donor‐acceptor (push‐pull) chromophores (±)‐ 4 and (±)‐ 5 with a 6H,12H‐5,11‐methanodibenzo[b,f][1,5]diazocine scaffold (Scheme 1 and Fig. 2). The electronic structures of these compounds were investigated at a quantum‐chemical level (Figs. 2 and 3). The chemical reactivity of 6H,12H‐5,11‐methanodibenzo[b,f][1,5]diazocine ((±)‐ 11 ) towards aromatic electrophilic substitution (Scheme 2 and Table) provided additional information about its electronic structure and confirmed nonnegligible delocalization of the lone pair of the bridge‐head N‐atoms in this heterocyclic system.     

Microwave Induced Synthesis of 3‐Aryl‐6‐(6‐/8‐substituted 4‐chloroquinoline‐3‐yl) ‐ s ‐triazolo [3,4‐b] −1,3,4‐thiadiazoles

The condensation of 4‐amino‐3‐aryl‐5‐mercapto‐1, 2, 4‐triazoles (1a‐f) with 6‐/8‐substituted 1,4‐dihydro‐4‐oxo‐quinoline‐3‐carboxylic adds (2a‐d) in the presence of phosphorus oxychloride on refluxng or under microwave irradiation gave twenty four novel 3‐aryl‐6‐ (6‐/8‐substituted 4‐chloroquinoline‐3‐yl)‐s‐triazolo[3,4‐b]‐1, 3,4‐thiadiazoles (4a‐x), Considerable increase in the reaction rate has been observed with improved yields under microwave irradiation. The structures of the compounds synthesized were determined by elemental analyses, IR, ¹H NMR and MS spectra. Their spectral properties and the reaction mechanism were also discussed. The preliminary biological test showed that some of compounds bad moderate antibacterial activities.     

Synthesis and NMR characterization of 6‐Phenyl‐6‐deoxy‐2,3‐di‐O‐methylcellulose

Cellulose ( 1 ) was converted for the first time to 6‐phenyl‐6‐deoxy‐2,3‐di‐O‐methylcellulose ( 6 ) in 33% overall yield. Intermediates in the five‐step conversion of 1 to­ 6 were: 6‐O‐tritylcellulose ( 2 ), 6‐O‐trityl‐2,3‐di‐O‐methylcellulose ( 3 ), 2,3‐di‐O‐methylcellulose ( 4 ); and 6‐bromo‐6‐deoxy‐2,3‐di‐O‐methylcellulose ( 5 ). Elemental and quantitative carbon‐13 analyses were concurrently used to verify and confirm the degrees of substitution in each new polymer. Gel permeation chromotography (GPC) data were generated to monitor the changes in molecular weight (DP_w) as the synthesis progressed, and the compound average decrease in cellulose DP_w was ～ 27%. Differential scanning calorimetry (DSC) and thermogravimetric analysis (TGA) were used to characterize the decomposition of all polymers. The degradation temperatures ( °C) and percent char at 500 °C of cellulose derivatives 2 to 6 were 308.6 and 6.3%, 227.6 °C and 9.7%, 273.9 °C and 30.2%, 200.4 °C and 25.6%, and 207.2 °C and 27.0%, respectively. The glass transition temperature (T_g) of­6‐O‐tritylcellulose by dynamic mechanical analysis (DMA) occurred at 126.7 °C and the modulus (E′, Pa) dropped 8.9 fold in the transition from ?150 °C to + 180 °C (6.6 × 10⁹ to 7.4 × 10⁸ Pa). Modulus at 20 °C was 3.26 × 10⁹ Pa. Complete proton and carbon‐13 chemical shift assignments of the repeating unit of the title polymer were made by a combination of the HMQC and COSY NMR methods. Ultimate non‐destructive proof of carbon–carbon bond formation at C6 of the anhydroglucose moiety was established by generating correlations between resonances of CH₂6 (anhydroglucose) and C1′, H2′, and H6′ of the attached aryl ring using the heteronuclear multiple‐bond correlation (HMBC) method. In this study, we achieved three major objectives: (a) new methodologies for the chemical modification of cellulose were developed; (b) new cellulose derivatives were designed, prepared and characterized; (c) unequivocal structural proof for carbon–carbon bond formation with cellulose was derived non‐destructively by use of one‐ and two‐dimensional NMR methods. Copyright © 2002 John Wiley & Sons, Ltd.     

New Approaches to 6‐Oxoisoaporphine and Tetrahydroisoquinoline Derivatives

2,3‐Dihydro‐6‐hydroxy‐5‐methoxy‐7H‐dibenzo[de,h]quinolin‐7‐one, 6‐hydroxy‐5‐methoxy‐7H‐dibenzo[de,h]quinolin‐7‐one, and 2‐(6,7‐dimethoxy‐3,4‐dihydroisoquinolin‐1‐yl)benzyl benzoate, easily available by a Bischler–Napieralski cyclization, were used as starting materials to afford 6‐oxoisoaporphine and 2,3‐dimethoxy‐5,6,8,12b‐tetrahydroisoindolo[1,2‐a]isoquinoline as the main products. However, the catalytic hydrogenation of the benzyl benzoate derivative afforded, under mild conditions, 1,2,3,4‐tetrahydro‐6,7‐dimethoxy‐1‐(2‐methylphenyl)isoquinoline.     

A Convergent Synthesis of a Twelve‐Membered Macrolide Natural Product, (6R,12S)‐6‐Hydroxy‐12‐methyl‐1‐oxacyclododecane‐2,5‐dione

A new polyketide metabolite, the twelve‐membered macrolide 1 , isolated from the endophytic fungal strain Cladosporium tenuissimum LR 463 of Maytenus hookeri, whose structure had been determined as (6R,12S)‐6‐hydroxy‐12‐methyl‐1‐oxacyclododecane‐2,5‐dione, was synthesized for the first time by a convergent strategy via Yamaguchi esterification of 2 with 3 and ring‐closing metathesis (RCM) to afford the cyclic ester 1 that was eventually transformed to the target molecule. However, the total synthesis revealed that the assigned structure of the natural product is not correct.     

A One‐Pot Biginelli Synthesis of 6‐Unsubstituted 5‐Aroylpyrimidin‐2(1H)‐ones and 6‐Acetyl‐1,2,4‐triazin‐3(2H)‐ones

The three‐component Biginelli‐like cyclocondensation reaction of enamines 1 , urea, and aldehydes in dioxane/acetic acid efficiently afforded the corresponding 6‐unsubstituted 3,4‐dihydropyrimidin‐2(1H)‐ones 2 in good yields (Scheme 1, Table). The corresponding reaction of azaenamine (=hydrazone) 7 with benzaldehyde and urea afforded 6‐acetyl‐1,2,4‐triazin‐3(2H)‐ones in good yields (Scheme 3).     

Synthesis of 1,3,4‐Oxadiazole Acyclo C‐Nucleosides Bearing 5‐Methylthio{7‐substituted‐1,2,4‐triazolo[1,5‐d]tetrazol‐6‐yl}moieties

Oxidative cyclization of the sugar hydrazones ( 3_a‐f ) derived from {7H‐1,2,4‐triazolo[1,5‐d]tetrazol‐6‐ylsulfanyl}acetic acid hydrazide ( 1 ) and aldopentoses 2_a‐c or aldohexoses 2_d‐f with bromine in acetic acid in the presence of anhydrous sodium acetate, followed by acetylation with acetic anhydride gave the corresponding 2‐(per‐O‐acetyl‐alditol‐l‐yl)‐5‐methylthio{7H‐1,2,4‐triazolo[1,5‐d]tetrazol‐6‐yl}‐1,3,4‐oxadiazoles ( 5_a‐f ). Condensative cyclization of the sugar hydrazones ( 3_a‐f ) by heating with acetic anhydride gave the corresponding 3‐acetyl‐2‐(per‐O‐acetyl‐alditol‐1‐yl)‐2,3‐dihydro‐5‐methylthio{7‐acetyl‐1,2,4‐triazolo[1,5‐d]tetrazol‐6‐yl}‐1,3,4‐oxadiazoles ( 11_a‐f ). De‐O‐acetylation of the acyclo C‐nucleoside peracetates ( 5 and 11 ) with methanolic ammonia afforded the hydrazono lactones ( 7 ) and the acyclo C‐nucleosides ( 12 ), respectively. The structures of new oxadiazole derivatives were confirmed by analytical and spectral data.     

Synthesis and Cytotoxic Evaluation of Novel 1,2,3‐Triazole‐4‐Linked (2E,6E)‐2‐Benzylidene‐6‐(4‐nitrobenzylidene)cyclohexanones

This work describes the synthesis of novel 1,2,3‐triazole‐4‐linked (2E,6E)‐2‐benzylidene‐6‐(4‐nitrobenzylidene)cyclo‐hexanones starting from cyclohexanone. 1‐(Cyclohex‐1‐en‐1‐yl)piperidine, the enamine from cyclohexanone and piperidine, reacted with 4‐nitrobenzaldehyde to obtain 2‐(4‐nitrobenzylidene)cyclohexanone. Condensation of the latter compound with (prop‐2‐yn‐1‐yloxy)benzaldehyde derivatives under acidic conditions gave (4‐nitrobenzylidene)‐[(prop‐2‐yn‐1‐yloxy)‐benzylidene]cyclohexanones. Finally, ‘click reaction’ of these derivatives and various organic azides led to the title compounds. All compounds were examined by MTT assay for cytotoxic activity in one human breast cancer cell line, MDA‐MB‐231.     

6‐Propyl‐2‐thiouracil versus 6‐methoxymethyl‐2‐thiouracil: enhancing the hydrogen‐bonded synthon motif by replacement of a methylene group with an O atom

The understanding of intermolecular interactions is a key objective of crystal engineering in order to exploit the derived knowledge for the rational design of new molecular solids with tailored physical and chemical properties. The tools and theories of crystal engineering are indispensable for the rational design of (pharmaceutical) cocrystals. The results of cocrystallization experiments of the antithyroid drug 6‐propyl‐2‐thiouracil (PTU) with 2,4‐diaminopyrimidine (DAPY), and of 6‐methoxymethyl‐2‐thiouracil (MOMTU) with DAPY and 2,4,6‐triaminopyrimidine (TAPY), respectively, are reported. PTU and MOMTU show a high structural similarity and differ only in the replacement of a methylene group (–CH₂–) with an O atom in the side chain, thus introducing an additional hydrogen‐bond acceptor in MOMTU. Both molecules contain an ADA hydrogen‐bonding site (A = acceptor and D = donor), while the coformers DAPY and TAPY both show complementary DAD sites and therefore should be capable of forming a mixed ADA/DAD synthon with each other, i.e. N—H…O, N—H…N and N—H…S hydrogen bonds. The experiments yielded one solvated cocrystal salt of PTU with DAPY, four different solvates of MOMTU, one ionic cocrystal of MOMTU with DAPY and one cocrystal salt of MOMTU with TAPY, namely 2,4‐diaminopyrimidinium 6‐propyl‐2‐thiouracilate–2,4‐diaminopyrimidine–N,N‐dimethylacetamide–water (1/1/1/1) (the systematic name for 6‐propyl‐2‐thiouracilate is 6‐oxo‐4‐propyl‐2‐sulfanylidene‐1,2,3,6‐tetrahydropyrimidin‐1‐ide), C₄H₇N₄⁺·C₇H₉N₂OS⁻·C₄H₆N₄·C₄H₉NO·H₂O, (I), 6‐methoxymethyl‐2‐thiouracil–N,N‐dimethylformamide (1/1), C₆H₈N₂O₂S·C₃H₇NO, (II), 6‐methoxymethyl‐2‐thiouracil–N,N‐dimethylacetamide (1/1), C₆H₈N₂O₂S·C₄H₉NO, (III), 6‐methoxymethyl‐2‐thiouracil–dimethyl sulfoxide (1/1), C₆H₈N₂O₂S·C₂H₆OS, (IV), 6‐methoxymethyl‐2‐thiouracil–1‐methylpyrrolidin‐2‐one (1/1), C₆H₈N₂O₂S·C₅H₉NO, (V), 2,4‐diaminopyrimidinium 6‐methoxymethyl‐2‐thiouracilate (the systematic name for 6‐methoxymethyl‐2‐thiouracilate is 4‐methoxymethyl‐6‐oxo‐2‐sulfanylidene‐1,2,3,6‐tetrahydropyrimidin‐1‐ide), C₄H₇N₄⁺·C₆H₇N₂O₂S⁻, (VI), and 2,4,6‐triaminopyrimidinium 6‐methoxymethyl‐2‐thiouracilate–6‐methoxymethyl‐2‐thiouracil (1/1), C₄H₈N₅⁺·C₆H₇N₂O₂S⁻·C₆H₈N₂O₂S, (VII). Whereas in (I) only an AA/DD hydrogen‐bonding interaction was formed, the structures of (VI) and (VII) both display the desired ADA/DAD synthon. Conformational studies on the side chains of PTU and MOMTU also revealed a significant deviation for cocrystals (VI) and (VII), leading to the desired enhancement of the hydrogen‐bond pattern within the crystal.     

Fabrication of poly(2‐oxy‐6‐naphthoyl) particles by direct polycondensation of 2‐hydroxy‐6‐naphthoic acid

Morphology control of poly(2‐oxy‐6‐naphthoyl) (PON) was examined by using reaction‐induced crystallization of oligomers during direct polycondensation of 2‐hydroxy‐6‐naphthoic acid with p‐toluenesulfonyl chloride and N,N‐dimethylformamide in pyridine. PON particles were obtained of which the diameter was in the range of 8.0–8.3 µm. The particles were comprised of many lamellae and exhibited spherulitic morphology. They possessed high crystallinity evaluated from wide‐angle X‐ray scattering (WAXS). Formation mechanism of the particles was clarified from the results of morphology observation, yield, density and WAXS. When the number average degree of polymerization of the oligomers exceeded a critical value of ca. 4–5, they were precipitated to form lamellae. The lamellae grew to spherulites through screw dislocation with continuous precipitation of the oligomer from the solution. Finally, further polymerization occurred gradually in the precipitates. Copyright © 2005 John Wiley & Sons, Ltd.     

6‐(Diazomethyl)‐1,3‐bis(methoxymethyl)uracil,Synthesis and Transformation into Annulated Pyrimidinediones

6‐(Diazomethyl)‐1,3‐bis(methoxymethyl)uracil ( 5 ) was prepared from the known aldehyde 3 by hydrazone formation and oxidation. Thermolysis of 5 and deprotection gave the pyrazolo[4,3‐d]pyrimidine‐5,7‐diones 7a and 7b . Rh₂(OAc)₄ catalyzed the transformation of 5 into to a 2 : 1 (Z)/(E) mixture of 1,2‐diuracilylethenes 9 (67%). Heating (Z)‐ 9 in 12n HCl at 95° led to electrocyclisation, oxidation, and deprotection to afford 73% of the pyrimido[5,4‐f]quinazolinetetraone 12 . The Rh₂(OAc)₄‐catalyzed reaction of 5 with 3,4‐dihydro‐2H‐pyran and 2,3‐dihydrofuran gave endo/exo‐mixtures of the 2‐oxabicyclo[4.1.0]heptane 13 (78%) and the 2‐oxabicyclo[3.1.0]hexane 15 (86%), Their treatment with AlCl₃ or Me₂AlCl promoted a vinylcyclopropane–cyclopentene rearrangement, leading to the pyrano‐ and furanocyclopenta[1,2‐d]pyrimidinediones 14 (88%) and 16 (51%), respectively. Similarly, the addition product of 5 to 2‐methoxypropene was transformed into the 5‐methylcyclopenta‐pyrimidinedione 18 (55%). The Rh₂(OAc)₄‐catalyzed reaction of 5 with thiophene gave the exo‐configured 2‐thiabicyclo[3.1.0]hexane 19 (69%). The analoguous reaction with furan led to 8‐oxabicyclo[3.2.1]oct‐2‐ene 20 (73%), and the reaction with (E)‐2‐styrylfuran yielded a diastereoisomeric mixture of hepta‐1,4,6‐trien‐3‐ones 21 (75%) that was transformed into the (1E,4E,6E)‐configured hepta‐1,4,6‐trien‐3‐one 21 (60%) at ambient temperature.     

Supramolecular hydrogen‐bonding patterns in two cocrystals of the N(7)–H tautomeric form of N6‐benzoyladenine: N6‐benzoyladenine–3‐hydroxypyridinium‐2‐carboxylate (1/1) and N6‐benzoyladenine–DL‐tartaric acid (1/1)

Two novel cocrystals of the N(7)—H tautomeric form of N⁶‐benzoyladenine (BA), namely N⁶‐benzoyladenine–3‐hydroxypyridinium‐2‐carboxylate (3HPA) (1/1), C₁₂H₉N₅O·C₆H₅NO₃, (I), and N⁶‐benzoyladenine–DL‐tartaric acid (TA) (1/1), C₁₂H₉N₅O·C₄H₆O₆, (II), are reported. In both cocrystals, the N⁶‐benzoyladenine molecule exists as the N(7)—H tautomer, and this tautomeric form is stabilized by intramolecular N—H...O hydrogen bonding between the benzoyl C=O group and the N(7)—H hydrogen on the Hoogsteen site of the purine ring, forming an S(7) motif. The dihedral angle between the adenine and phenyl planes is 0.94 (8)° in (I) and 9.77 (8)° in (II). In (I), the Watson–Crick face of BA (N6—H and N1; purine numbering) interacts with the carboxylate and phenol groups of 3HPA through N—H...O and O—H...N hydrogen bonds, generating a ring‐motif heterosynthon [graph set R₂²(6)]. However, in (II), the Hoogsteen face of BA (benzoyl O atom and N7; purine numbering) interacts with TA (hydroxy and carbonyl O atoms) through N—H...O and O—H...O hydrogen bonds, generating a different heterosynthon [graph set R₂²(4)]. Both crystal structures are further stabilized by π–π stacking interactions.     

ECEC and ECE‐Type Mechanisms in Electrochemical Oxidation of 4‐Substituted Catechols in the Presence of 4‐Hydroxy‐6‐methyl‐2‐pyrone

Electrochemical oxidation of 3,4‐dihydroxybenzoic acid ( 1 ) and 4‐tert‐butylcatechol ( 5 ) in the presence of 4‐hydroxy‐6‐methyl‐2‐pyrone ( 2 ) as nucleophile in aqueous solution has been studied using cyclic voltammetry and controlled‐potential coulometry. The results indicate that 1 via Michael reaction under electro‐decarboxylation reaction converts to heterocyclic compound 4 , and the quinone derived from 4‐tert‐butylcatechol ( 5 ) participates in Michael reaction with 2 and through an ECE mechanism converts to the corresponding o‐quinone ( 6a ). The electrochemical synthesis of 4 and 6a has been successfully performed in an undivided cell.     

An Oxidative Rearrangement of 6‐Phenylbicyclo[3.2.0]heptan‐6‐ol to 1,1′‐Biphenyl‐Carbaldehydes: A Mechanistic Study

Acid‐catalyzed rearrangement of 6‐phenylbicyclo[3.2.0]heptan‐6‐ol gave 1,1′‐biphenyl and 1,1′‐biphenyl‐carbaldehydes in small amounts as well as the expected rearrangement products. A detailed study of the reaction mechanism revealed that the conversion occurs via an oxidative process through the consecutive formation of cycloheptadienes, cycloheptatrienes, and 1,1′‐biphenyls. The acid‐catalyzed rearrangement of 6‐phenylbicyclo[3.2.0]hept‐2‐en‐6‐ols gave 1‐ and 2‐phenylcycloheptatrienes directly, from which 1,1′‐biphenyl and 1,1′‐biphenyl‐carbaldehydes were obtained by oxidation.     

Superacid‐Catalyzed Cyclization of Methyl (6Z)‐Geranylfarnesoates

Methyl (2Z,6Z,10E,14E)‐ ( 3 ) and methyl (2E,6Z,10E,14E)‐geranylfarnesoate ( 4 ) were prepared, and then individually cyclized in the presence of the superacid FSO₃H. In the case of substrate 3 , the scalaranic ester 9 (26%) and the cheilanthanic ester 10 (39%) were isolated. Under the same conditions, substrate 4 afforded a mixture of the corresponding stereoisomers 11 (25%) and 12 (63%). The observed product selectivity supports that the internal, (6Z)‐configured C?C bond in these and other biologically relevant substrates plays an essential role in the cyclization process.     

Kristallstrukturen „supramolekularer”︁ (Benzo‐18‐krone‐6)kaliumtetrathiocyanatometallate: Ein dimerer Komplex {[K(Benzo‐18‐krone‐6)]2[Hg(SCN)4]}2 und zwei isomere Komplexe [K(Benzo‐18‐krone‐6)][Cd(SCN)3] mit kettenförmigen Trithiocyanatocadmat‐Anionen

Crystal Structures of „Supramolecular”︁ Benzo‐18‐crown‐6 Potassium Tetrathiocyanato Metallates: A Dimeric Complex {[K(Benzo‐18‐crown‐6)]₂[Hg(SCN)₄]}₂ and Two Isomeric Complexes [K(Benzo‐18‐crown‐6)][Cd(SCN)₃] Containing Trithiocyanato Cadmate Anions with Chain Structures By reaction of potassium thiocyanatomercurate(II) complexes with benzo‐18‐crown‐6 (2,3‐benzo‐1,4,7,10,13,16‐hexaoxacyclooctadec‐2‐ene) crystals of {[K(benzo‐18‐crown‐6)]₂[Hg(SCN₄)]}₂ ( 1 ) were obtained. 1 crystallizes monoclinic, space group P2₁/n (non‐standard setting of P2₁/c), a = 1737.35(2), b = 1377.16(2), c = 1984.12(3) pm, β = 100.637(1)°, Z = 2. With potassium tetrathiocyanatocadmate(II) two modifications of a complex [K(benzo‐18‐crown‐6)][Cd(SCN)₃] ( 2 , 3 ), of different symmetry were formed. 2 crystallizes monoclinic, P2₁/c, a = 1158,31(3), b = 1096,55(2), c = 2028,46(2) pm, β = 99,5261(2)°, Z = 4, 3  orthorhombic, P2₁cn, a = 1105,95(3), b = 1413,07(4), c = 1617,10(5) pm, Z = 4. 1 has a dimeric structure, built up from a dication K₂(benzo‐18‐crown‐6)₂]²⁺ and two [K(benzo‐18‐crown‐6)]⁺ cations, which are bridged by two [Hg(SCN)₄]^2– anions. In 2 and 3 triply bridged infinite [{Cd(SCN)₃^–}_n] zigzag chains, stretching along screw axes, are to be found as anions. In 2 these chains exist in two conformations related by inversion symmetry, whereas in 3 only one form can be found. [K(benzo‐18‐crown‐6)]⁺ cations are linked to the anion chains via K · · · S interactions of different lengths.     

Photoinduced and thermal reactions of α‐cyano‐β‐bromomethylcinnamide with 1‐benzyl‐1,4‐dihydronicotinamide

The photoinduced reaction of a mixture of (Z)‐α‐cyano‐β‐bromomethylcinnamide (1) and (E)‐α‐cyano‐β‐bromomethylcinnamide (2) with 1‐benzyl‐1, 4‐dihydronicotinamide produces a mixture of the (E)‐ and (Z)‐ isomers of α‐cyano‐β‐methylcinnamide (3 and 4). Using spin‐trapping technique for monitoring reactive intermediate, it is shown that the reaction proceeds via electron transfer‐debromination‐H abstraction mechanism. The thermal reaction of the same substrate with BNAH at 60°C in the dark gives three products: the (E)‐ and (Z)‐isomers of α‐cyano‐β‐methylcinnamide and a dehydrodimeric product; 2, 7‐dicyano‐3, 6‐diphenylocta‐2, 4, 6‐trien‐1, 8‐dioic amide (7). Based on product analysis, scavenger experiment and cyclic voltammetry, an electron transfer‐debromination‐disproportionation mechanism is proposed.     

Formation of 6‐Methyl‐7,11‐diphenylheptaleno[1,2‐c]furanones

The dehydrogenation reaction of a mixture of heptalene‐1,2‐ and heptalene‐4,5‐dimethanols 4a and 4b with basic MnO₂ in AcOEt at room temperature led to the formation of the corresponding heptaleno[1,2‐c]furan‐1‐one 6a and heptaleno[1,2‐c]furan‐3‐one 7a (Scheme 2). Both products can be isolated by chromatography on silica gel. The methylenation of the furan‐3‐one 7a with 1 mol‐equiv. of Tebbe's reagent at ?25 to ?30° afforded the 2‐isopropenyl‐5‐methylheptalene‐1‐methanol 9a , instead of the expected 3,6‐dimethylheptaleno[1,2‐c]furan 8 (Scheme 3). Also, the treatment of 7a with Takai's reagent did not lead to the formation of 8 . On standing in solution at room temperature, or more rapidly on heating at 60°, heptalene 9a undergoes a reversible double‐bond shift (DBS) to 9b with an equilibrium ratio of 1 : 1.     

Synthesis and Cytotoxicity of 1,4‐Dihydropyridines and an Unexpected 1,3‐Oxazin‐6‐one

Eight heterocycles have been prepared in a one‐pot reaction manner based on the Hantzsch dihydropyridine synthesis. The synthesis afforded seven dihydropyridines (DHP) and one unexpected 1,3‐oxazin‐6‐one. Their structures were confirmed based on NMR spectroscopy and mass spectrometry. The obtained products have been evaluated for their cytotoxicity against eight cancer cell lines and one normal cell line. Two halogenated DHPs ( 7 and 8 ) displayed cytotoxicity toward all the nine tested cancer cell lines with IC₅₀ values from 4.10 to 58.90 μm, while others showed selective activities. DHPs ( 7 and 8 ) bearing a Me group at C(2) and C(6) as well as a halogenated substituent at C(4′) were more antiproliferative than the others.