Dititanium-containing 19-tungstodiarsenate(III) [Ti2(OH)2As2W19O67(H2O)]8-: synthesis, structure, electrochemistry, and oxidation catalysis

The dititanium-containing 19-tungstodiarsenate(III) [Ti(2)(OH)(2)As(2)W(19)O(67)(H(2)O)](8-) (1) has been synthesized and characterized by IR, TGA, elemental analysis, electrochemistry, and catalytic studies. Single-crystal X-ray analysis was carried out on Cs(8)[Ti(2)(OH)(2)As(2)W(19)O(67)(H(2)O)].2CsCl.12H(2)O (Cs-1), which crystallizes in the monoclinic system, space group P2(1)/m, with a=12.7764(19), b=19.425(3), c=18.149(3) A, beta=110.234(3) degrees, and Z=2. Polyanion 1 comprises two (B-alpha-As(III)W(9)O(33)) Keggin moieties linked through an octahedral {WO(5)(H(2)O)} fragment and two unprecedented square-pyramidal {TiO(4)(OH)} groups, leading to a sandwich-type structure with nominal C(2v) symmetry. Synthesis of 1 was accomplished by reaction of TiOSO(4) and K(14)[As(2)W(19)O(67)(H(2)O)] in a 2:1 molar ratio in aqueous, acidic medium (pH 2). Polyanion 1 could also be isolated as a tetra-n-butyl ammonium (TBA) salt, {(n-C(4)H(9))(4)N}(5)H(3)[Ti(2)(OH)(2)As(2)W(19)O(67)(H(2)O)] (TBA-1). TBA-1 was studied by cyclic voltammetry in acetonitrile (MeCN) solutions containing 0.1 M LiClO(4) and compared with the results obtained with Cs-1 in aqueous media. In MeCN, the Ti(IV) and W(VI) waves could not be separated distinctly. An important adsorption phenomenon on the glassy carbon working electrode was encountered both in cyclic voltammetry and in controlled potential electrolysis and was confirmed by Electrochemical Quartz Crystal Microbalance (EQCM) studies on a carbon film. TBA-1, dissolved in MeCN, reacts with H(2)O(2) to give peroxo complexes stable enough for characterization by UV-visible spectroscopy, cyclic voltammetry, and EQCM. TBA-1 shows high catalytic activity (TOF=11.3 h(-1)) in cyclohexene oxidation with aqueous H(2)O(2) producing products typical of a heterolytic oxidation mechanism. The stability of TBA-1 under turnover conditions was confirmed by using IR, UV-visible spectroscopy as well as cyclic voltammetry.     

Two wheel-like polytungstates obtained by incorporation of two {Cu(4)} clusters and two molybdenum centers in the {W(48)} wheel

Two new {P(8)W(48)} wheel-based compounds, Na(12)Li(16){[Cu(H(2)O)](2)[Cu(4)(OH)(4)(H(2)O)(8)](2)P(8)W(48)O(184)}·55H(2)O (1), and K(4)Na(24)Li(10){(MoO(2))(2)(P(8)W(48)O(184))}·61H(2)O (2) have been synthesized by a conventional aqueous solution method, and characterized by UV, IR, TG analysis, XPRD, (31)P NMR, XPS, single-crystal X-ray diffraction analyses, magnetic study and electrochemistry study. In compound 1, a wheel-type {P(8)W(48)} containing two {Cu(4)} clusters and two isolated Cu cations results in a 10-Cu-containing polyoxotungstate, which represents the first {P(8)W(48)}-based compound trapping two transition metal (TM) clusters in its inner cavity. Further, the polyoxoanion was connected by Na(+) and Li(+) cations into a 3D framework. Compound 2 is a 2-Mo-containing {P(8)W(48)}-based polyoxotungstate. Magnetic study indicates that antiferromagnetic interactions exist in compound 1.     

Oxothiomolybdenum derivatives of the superlacunary crown heteropolyanion {P8W48}: structure of [K4{Mo4O4S4(H2O)3(OH)2}2(WO2)(P8W48O184)]30– and studies in solution

Reaction of the cyclic lacunary [H(7)P(8)W(48)O(184)](33-) anion (noted P(8)W(48)) with the [Mo(2)S(2)O(2)(H(2)O)(6)](2+) oxothiocation led to two compounds, namely, [K(4){Mo(4)O(4)S(4)(H(2)O)(3)(OH)(2)}(2)(WO(2))(P(8)W(48)O(184))](30-) (denoted 1) and [{Mo(4)O(4)S(4)(H(2)O)(3)(OH)(2)}(2)(P(8)W(48)O(184))](36-) (denoted 2), which were characterized in the solid state and solution. In the solid state, the structure of [K(4){Mo(4)O(4)S(4)(H(2)O)(3)(OH)(2)}(2)(WO(2))(P(8)W(48)O(184))](30-) reveals the presence of two disordered {Mo(4)O(4)S(4)(H(2)O)(3)(OH)(2)}(2+) "handles" connected on both sides of the P(8)W(48) ring. Such a disorder is consistent with the presence of two geometrical isomers where the relative disposition of the two {Mo(4)O(4)S(4)(H(2)O)(3)(OH)(2)}(2+) handles are arranged in a perpendicular or parallel mode. Such an interpretation is fully supported by (31)P and (183)W NMR solution studies. The relative stability of both geometrical isomers appears to be dependent upon the nature of the internal alkali cations, i.e., Na(+) vs K(+), and increased lability of the two {Mo(4)O(4)S(4)(H(2)O)(3)(OH)(2)}(2+) handles, compared to the oxo analogous, was clearly identified by significant broadening of the (31)P and (183)W NMR lines. Solution studies carried out by UV-vis spectroscopy showed that formation of the adduct [{Mo(4)O(4)S(4)(H(2)O)(3)(OH)(2)}(2)(P(8)W(48)O(184))](36-) occurs in the 1.5-4.7 pH range and corresponds to a fast and quantitative condensation process. Furthermore, (31)P NMR titrations in solution reveal formation of the "monohandle" derivative [{Mo(4)O(4)S(4)(H(2)O)(3)(OH)(2)}(P(8)W(48)O(184))](38-) as an intermediate prior to formation of the "bishandle" derivatives. Furthermore, the electrochemical behavior of [{Mo(4)O(4)S(4)(H(2)O)(3)(OH)(2)}(2)(P(8)W(48)O(184))](36-) was studied in aqueous medium and compared with the parent anion P(8)W(48).     

A comparative mechanistic study of the reversible binding of NO to a water-soluble octa-cationic Fe(III) porphyrin complex

The water-soluble, non-mu-oxo dimer-forming porphyrin, [5,10,15,20-tetrakis-4'-t-butylphenyl-2',6'-bis-(N-methylene-(4'-t-butylpyridinium))porphyrinato]iron(III) octabromide, (P(8+))Fe(III), with eight positively charged substituents in the ortho positions of the phenyl rings, was characterized by UV-vis and 1H NMR spectroscopy and 17O NMR water-exchange studies in aqueous solution. Spectrophotometric titrations of (P(8+))Fe(III) indicated a pKa1 value of 5.0 for coordinated water in (P(8+))Fe(III)(H2O)2. The monohydroxo-ligated (P(8+))Fe(III)(OH)(H2O) formed at 5 < pH < 12 has a weakly bound water molecule that undergoes an exchange reaction, k(ex) = 2.4 x 10(6) s(-1), significantly faster than water exchange on (P(8+))Fe(III)(H2O)2, viz. k(ex) = 5.5 x 10(4) s(-1) at 25 degrees C. The porphyrin complex reacts with nitric oxide to yield the nitrosyl adduct, (P(8+))Fe(II)(NO+)(L) (L = H2O or OH-). The diaqua-ligated (P(8+))Fe(III)(H2O)2 binds and releases NO according to a dissociatively activated mechanism, analogous to that reported earlier for other (P)Fe(III)(H2O)2 complexes. Coordination of NO to (P(8+))Fe(III)(OH)(H2O) at high pH follows an associative mode, as evidenced by negative deltaS(double dagger)(on) and deltaV(double dagger)(on) values measured for this reaction. The observed ca. 10-fold decrease in the NO binding rate on going from six-coordinate (P(8+))Fe(III)(H2O)2 (k(on) = 15.1 x 10(3) M(-1) s(-1)) to (P(8+))Fe(III)(OH)(H2O) (k(on) = 1.56 x 10(3) M(-1) s(-1) at 25 degrees C) is ascribed to the different nature of the rate-limiting step for NO binding at low and high pH, respectively. The results are compared with data reported for other water-soluble iron(III) porphyrins with positively and negatively charged meso substituents. Influence of the porphyrin periphery on the dynamics of reversible NO binding to these (P)Fe(III) complexes as a function of pH is discussed on the basis of available experimental data.     

Tetrakis(dimethyltin)-containing tungstophosphate [{Sn(CH3)2}4(H2P4W24O92)2]28-: first evidence for a lacunary Preyssler ion

We demonstrate for the first time that the superlacunary polyanion [H(2)P(4)W(24)O(94)](22)(-) reacts with electrophiles. One-pot reaction of this precursor polyanion with dimethyltin dichloride in aqueous acidic medium results in the hybrid organic-inorganic [{Sn(CH(3))(2)}(4)(H(2)P(4)W(24)O(92))(2)](28)(-) (1). Single-crystal X-ray analysis was carried out on K(17)Li(11)[{Sn(CH(3))(2)}(4)(H(2)P(4)W(24)O(92))(2)].51H(2)O (1a), which crystallizes in the tetragonal system, space group P4(2)/nmc, a = b = 21.5112(17) and c = 27.171(3) A, and Z = 2. Polyanion 1 is composed of two (P(4)W(24)O(92)) fragments that are linked by four equivalent diorganotin groups. The unprecedented assembly 1 has D(2)(d)() symmetry and contains a hydrophobic pocket in the center of the molecule. The cyclic voltammetry pattern of 1 is constituted by a first broad, 16-electron reduction wave followed by a second large current intensity wave. No splitting of the first reduction wave could be obtained at moderate scan rate values, even though two well-separated oxidation processes are associated with it. The characteristics of the first wave are clearly different from those obtained for the polyanion precursor [H(2)P(4)W(24)O(94)](22)(-) and the related, wheel-shaped [H(7)P(8)W(48)O(184)](33)(-), which is due to the {Sn(CH(3))(2)} fragments in 1. However, no feature was observed in the voltammogram which could be associated with reduction of the Sn centers.     

The bis-phenyltin-substituted, lone-pair-containing tungstoarsenate [(C(6)h(5)Sn)(2)as(2)W(19)O(67)(H(2)O)](8)(-)

The bis-phenyltin-substituted, lone-pair-containing tungstoarsenate [(C(6)H(5)Sn)(2)As(2)W(19)O(67)(H(2)O)](8)(-) (1) has been synthesized and characterized by multinuclear NMR, IR, and elemental analysis. Single-crystal X-ray analysis was carried out on (NH(4))(7)Na[(C(6)H(5)Sn)(2)As(2)W(19)O(67)(H(2)O)].17.5H(2)O (NH(4)(-1), which crystallizes in the monoclinic system, space group P2(1)/c, with a = 18.3127(17) A, b = 24.403(2) A, c = 22.965(2) A, beta = 106.223(2) degrees, and Z = 4. Polyanion 1 consists of two B-alpha-(As(III)W(9)O(33)) Keggin moieties linked via a WO(H(2)O) fragment and two SnC(6)H(5) groups leading to a sandwich-type structure with nominal C(2)(v) symmetry. Polyanion 1 is stable in solution as indicated by the expected 6-line pattern (4:4:4:4:2:1) in (183)W NMR and the expected (119)Sn, (13)C, and (1)H NMR spectra. Synthesis of 1 was accomplished by reaction of C(6)H(5)SnCl(3) and K(14)[As(2)W(19)O(67)(H(2)O)] in a 2:1 molar ratio in aqueous acidic medium (pH 2). In the solid-state structure of NH(4)(-1, neighboring polyanions are weakly bound via W-O-Na bonds leading to chains which interact with each other via the phenyl rings resulting in a 2-D assembly.     

Reactions of trivacant Wells-Dawson heteropolytungstates. Ionic strength and Jahn-Teller effects on formation in multi-iron complexes

Reaction of alpha-P(2)W(15)O(56)(12-) and Fe(III) in a saturated NaCl solution produces a trisubstituted Wells-Dawson structure with three low-valent metals, alpha-(Fe(III)Cl)(2)(Fe(III)OH(2))P(2)W(15)O(59)(11-) (1). Dissolution of this species into 1 M NaBr (Br(-) is non-coordinating) gives the triaquated species alpha-(Fe(III)OH(2))(3)P(2)W(15)O(59)(9-) (2). Ionic strength values of 1 M or greater are necessary to avoid decomposition of 1 or 2 to the conventional sandwich-type complex, alpha beta beta alpha-(Fe(III)OH(2))(2)Fe(III)(2)(P(2)W(15)O(56))(2)(12-) (3). If the pH is greater than 5, a new triferric sandwich, alpha alpha beta alpha-(NaOH(2))(Fe(III)OH(2))Fe(III)(2)(P(2)W(15)O(56))(2)(14-) (4), forms rather than 3. Like the previously reported Wells-Dawson-derived sandwich-type structures with three metals in the central unit ([TM(II)Fe(III)(2)(P(2)W(15)O(56))(P(2)TM(II)(2)W(13)O(52))],(16-) TM = Cu, Co), this complex has a central alpha-junction and a central beta-junction. Thermal studies suggest that 4 is more stable than 3 over a wide range of temperatures and pH values. The intrinsic Jahn-Teller distortion of d-electron-containing metal ions incorporated into the external sites of the central multi-metal unit impacts the stoichiometry of their incorporation (with a consequent change in the inter-POM-unit connectivity, where POM = polyoxometalate). Reaction of non-distorting Ni(II) with the diferric lacunary sandwich-type POM alpha alpha alpha alpha-(NaOH(2))(2)Fe(III)(2)(P(2)W(15)O(56))(2)(16-) (5) produces alpha beta beta alpha-(Ni(II)OH(2))(2)Fe(III)(2)(P(2)W(15)O(56))(2)(14-) (6), a Wells-Dawson sandwich-type structure with two Ni(II) and two Fe(III) in the central unit. All structures are characterized by (31)P NMR, IR, UV-vis, magnetic susceptibility, and X-ray crystallography. Complexes 4 and 6 are highly selective and effective catalysts for the H(2)O(2)-based epoxidation of alkenes.     

Synthesis and characterization of iron(III)-substituted, dimeric polyoxotungstates, [Fe(4)(H(2)O)(10)(beta-XW(9)O(33))(2)](n-) (n = 6, X = As(III), Sb(III); n = 4, X = Se(IV), Te(IV))

Interaction of the lacunary [alpha-XW(9)O(33)](9-) (X = As(III), Sb(III)) with Fe(3+) ions in acidic, aqueous medium leads to the formation of dimeric polyoxoanions, [Fe(4)(H(2)O)(10)(beta-XW(9)O(33))(2)](6-) (X = As(III), Sb(III)) in high yield. X-ray single-crystal analyses were carried out on Na(6)[Fe(4)(H(2)O)(10)(beta-AsW(9)O(33))(2)] x 32H(2)O, which crystallizes in the monoclinic system, space group C2/m, with a = 20.2493(18) A, b = 15.2678(13) A, c = 16.0689(14) A, beta = 95.766(2) degrees, and Z = 2; Na(6)[Fe(4)(H(2)O)(10)(beta-SbW(9)O(33))(2)] x 32H(2)O is isomorphous with a = 20.1542(18) A, b = 15.2204(13) A, c = 16.1469(14) A, and beta = 95.795(2) degrees. The selenium and tellurium analogues are also reported, [Fe(4)(H(2)O)(10)(beta-XW(9)O(33))(2)](4-) (X = Se(IV), Te(IV)). They are synthesized from sodium tungstate and a source of the heteroatom as precursors. X-ray single-crystal analysis was carried out on Cs(4)[Fe(4)(H(2)O)(10)(beta-SeW(9)O(33))(2)] x 21H(2)O, which crystallizes in the triclinic system, space group P macro 1, with a = 12.6648(10) A, b = 12.8247(10) A, c = 16.1588(13) A, alpha = 75.6540(10) degrees, beta = 87.9550(10) degrees, gamma = 64.3610(10) gamma, and Z = 1. All title polyanions consist of two (beta-XW(9)O(33)) units joined by a central pair and a peripheral pair of Fe(3+) ions leading to a structure with idealized C(2h) symmetry. It was also possible to synthesize the Cr(III) derivatives [Cr(4)(H(2)O)(10)(beta-XW(9)O(33))(2)](6-) (X = As(III), Sb(III)), the tungstoselenates(IV) [M(4)(H(2)O)(10)(beta-SeW(9)O(33))(2)]((16)(-)(4n)-) (M(n+) = Cr(3+), Mn(2+), Co(2+), Ni(2+), Zn(2+), Cd(2+), and Hg(2+)), and the tungstotellurates(IV) [M(4)(H(2)O)(10)(beta-TeW(9)O(33))(2)]((16-4n)-) (M(n+) = Cr(3+), Mn(2+), Co(2+), Ni(2+), Cu(2+), Zn(2+), Cd(2+), and Hg(2+)), as determined by FTIR. The electrochemical properties of the iron-containing species were also studied. Cyclic voltammetry and controlled potential coulometry aided in distinguishing between Fe(3+) and W(6+) waves. By variation of pH and scan rate, it was possible to observe the stepwise reduction of the Fe(3+) centers.     

Proton control of oxidation and spin state in a series of iron tripodal imidazole complexes

Reaction of iron salts with three tripodal imidazole ligands, H(3)(1), H(3)(2), H(3)(3), formed from the condensation of tris(2-aminoethyl)amine (tren) with 3 equiv of an imidazole carboxaldehyde yielded eight new cationic iron(III) and iron(II), [FeH(3)L](3+or2+), and neutral iron(III), FeL, complexes. All complexes were characterized by EA(CHN), IR, UV, M?ssbauer, mass spectral techniques and cyclic voltammetry. Structures of three of the complexes, Fe(2).3H(2)O (C(18)H(27)FeN(10)O(3), a = b = c = 20.2707(5), cubic, I3d, Z = 16), Fe(3).4.5H(2)O (C(18)H(30)FeN(10)O(4.5), a = 20.9986(10), b = 11.7098(5), c = 19.9405(9), beta = 109.141(1), monoclinic, P2(1)/c), Z = 8), and [FeH(3)(3)](ClO(4))(2).H(2)O (C(18)H(26)Cl(2)FeN(10)O(9), a = 9.4848(4), b = 23.2354(9), c = 12.2048(5), beta = 111.147(1) degrees, monoclinic, P2(1)/n, Z = 4) were determined at 100 K. The structures are similar to one another and feature an octahedral iron with facial coordination of imidazoles and imine nitrogen atoms. The iron(III) complexes of the deprotonated ligands, Fe(1), Fe(2), and Fe(3), are low-spin while the protonated iron(III) cationic complexes, [FeH(3)(1)](ClO(4))(3) and [FeH(3)(2)](ClO(4))(3), are high-spin and spin-crossover, respectively. The iron(II) cationic complexes, [FeH(3)(1)]S(4)O(6), [FeH(3)(2)](ClO(4))(2), [FeH(3)(3)](ClO(4))(2), and [FeH(3)(3)][B(C(6)H(5))(4)](2) exhibit spin-crossover behavior. Cyclic voltammetric measurements on the series of complexes show that complete deprotonation of the ligands produces a negative shift in the Fe(III)/Fe(II) reduction potential of 981 mV on average. Deprotonation in air of either cationic iron(II) or iron(III) complexes, [FeH(3)L](3+or2+), yields the neutral iron(III) complex, FeL. The process is reversible for Fe(3), where protonation of Fe(3) yields [FeH(3)(3)](2+).     

Multi-iron wells-Dawson heteropolytungstates. Electrochemical probing of siderophoric behavior in sandwich-type complexes

The demetalation process of 10 multi-iron Wells-Dawson polyoxometalates is studied by cyclic voltammetry and controlled potential coulometry. Eight sandwich-type complexes (alphaalphaalphaalpha-Na(16)[(NaOH(2))(2)(Fe(III))(2)(X(2)W(15)O(56))(2)], alphaalphabetaalpha-Na(14)[(NaOH(2))(Fe(III)OH(2))(Fe(III))(2)(X(2)W(15)O(56))(2)], alphabetabetaalpha-Na(12)[(Fe(III)OH(2))(2)(Fe(III))(2)(X(2)W(15)O(56))(2)], and alphabetabetaalpha-Na(14)[(Mn(II)OH(2))(2)(Fe(III))(2)(X(2)W(15)O(56))(2)] (where X = P(V) or As(V))) and two monomeric complexes (alpha-Na(11)[(P(2)(Fe(III)Cl)(2)(Fe(III)OH(2))W(15)O(59))] and alpha-Na(11)[(As(2)(Fe(III)Cl)(2)Fe(III)OH(2))W(15)O(59))]) were selected for this study. All 10 complexes show Fe(III) waves which are well-separated from the redox activity of the W(VI) centers. At room temperature and under mild conditions, iron release from the complexes is observed upon reduction of the Fe(III) centers. This release is controlled by the ionic strength of the medium, the nature and concentration of the anions present in the supporting electrolyte, and by the pH of the solution. This behavior parallels those described for most siderophores which depend on the same parameters.     

Encapsulation of cyanometalates by a tris-macrocyclic ligand tricopper(II) complex: syntheses, structural variation, and magnetic exchange coupling pathways

The reaction of [M(CN)(6)](3-) (M = Cr(3+), Mn(3+), Fe(3+), Co(3+)) and [M(CN)(8)](4-/3-) (M = Mo(4+/5+), W(4+/5+)) with the trinuclear copper(II) complex of 1,3,5-triazine-2,4,6-triyltris[3-(1,3,5,8,12-pentaazacyclotetradecane)] ([Cu(3)(L)](6+)) leads to partially encapsulated cyanometalates. With hexacyanometalate(III) complexes, [Cu(3)(L)](6+) forms the isostructural host-guest complexes [[[Cu(3)(L)(OH(2))(2)][M(CN)(6)](2)][M(CN)(6)]][M(CN)(6)]30 H(2)O with one bridging, two partially encapsulated, and one isolated [M(CN)(6)](3-) unit. The octacyanometalates of Mo(4+/5+) and W(4+/5+) are encapsulated by two tris-macrocyclic host units. Due to the stability of the +IV oxidation state of Mo and W, only assemblies with [M(CN)(8)](4-) were obtained. The Mo(4+) and W(4+) complexes were crystallized in two different structural forms: [[Cu(3)(L)(OH(2))](2)[Mo(CN)(8)]](NO(3))(8)15 H(2)O with a structural motif that involves isolated spherical [[Cu(3)(L)(OH(2))](2)[M(CN)(8)]](8+) ions and a "string-of-pearls" type of structure [[[Cu(3)(L)](2)[M(CN)(8)]][M(CN)(8)]](NO(3))(4) 20 H(2)O, with [M(CN)(8)](4-) ions that bridge the encapsulated octacyanometalates in a two-dimensional network. The magnetic exchange coupling between the various paramagnetic centers is characterized by temperature-dependent magnetic susceptibility and field-dependent magnetization data. Exchange between the CuCu pairs in the [Cu(3)(L)](6+) "ligand" is weakly antiferromagnetic. Ferromagnetic interactions are observed in the cyanometalate assemblies with Cr(3+), exchange coupling of Mn(3+) and Fe(3+) is very small, and the octacoordinate Mo(4+) and W(4+) systems have a closed-shell ground state.     

Redox switching of polyoxometalate-methylene blue-based layer-by-layer films

Iron-substituted crown-type polyoxometalate (POM) [P(8)W(48)O(184)Fe(16)(OH)(28)(H(2)O)(4)](20-) has been successfully immobilized onto glassy carbon electrode surfaces by means of the layer-by-layer (LBL) technique employing the cationic redox active dye, methylene blue (MB). The constructed multilayers exhibit pH-dependent redox activity for both the anionic POM and the cationic dye moieties, which is in good agreement with their solution behavior. The films have been characterized by alternating current impedance, atomic force microscopy, and X-ray photoelectron spectroscopy, whereby the nature of the outer layer within the assemblies was found to have an effect upon the film's behavior. Preliminary investigations show that the POM dye-based films show electrocatalytic ability toward the reduction of hydrogen peroxide, however, only when there is an outer anionic POM layer.     

Iron(III) activation hits a [4 + 4] macrocycle

The tetranuclear complex [Fe(III)2(L')(OH)(CH3O)]2, 1, has been synthesised from the reaction of either ferrous [in excess as 4:1 or stoichiometric 2:1 iron(II) : H4L] or ferric ions [4:1 iron(III) : H4L] with the large macrocycle, H4L, using aerobic conditions in methanol in the presence of triethylamine. The structure of 1 was determined by single-crystal X-ray diffraction. These reaction conditions lead to the modification of the original macrocycle through the incorporation of a methylene group between two amine groups to give an imidazolidine ring in (L')4-. The controlled addition of formaldehyde into the reaction system results in a significantly improved yield of 1, suggesting that it is involved in the reaction mechanism. The (L')4- macrocycle binds to two, well-separated, iron(III) centres [Fe(1)...Fe(1a) > 8 A]. Each iron(III) centre is further linked via hydroxy and methoxy bridges to equivalent iron(iii) centres contained in a second macrocycle. Overall this gives a structure containing two {Fe(OH)(CH(3)O)Fe} dimers [Fe(1)...Fe(2)ca. 3.2 A] sandwiched by two (L')4- macrocycles. The complex was further characterised by SQUID magnetic measurements and can be interpreted in terms of two isolated antiferromagnetically coupled Fe(III) dimers (J=-23.75 K).     

Structural and spectroscopic features of a cis (hydroxo)-Fe(III)-(carboxylato) configuration as an active site model for lipoxygenases

In our preliminary communication (Ogo, S.; Wada, S.; Watanabe, Y.; Iwase, M.; Wada, A.; Harata, M.; Jitsukawa, K.; Masuda, H.; Einaga, H. Angew. Chem., Int. Ed. 1998, 37, 2102-2104), we reported the first example of X-ray analysis of a mononuclear six-coordinate (hydroxo)iron(III) non-heme complex, [Fe(III)(tnpa)(OH)(RCO(2))]ClO(4) [tnpa = tris(6-neopentylamino-2-pyridylmethyl)amine; for 1, R = C(6)H(5)], which has a characteristic cis (hydroxo)-Fe(III)-(carboxylato) configuration that models the cis (hydroxo)-Fe(III)-(carboxylato) moiety of the proposed (hydroxo)iron(III) species of lipoxygenases. In this full account, we report structural and spectroscopic characterization of the cis (hydroxo)-Fe(III)-(carboxylato) configuration by extending the model complexes from 1 to [Fe(III)(tnpa)(OH)(RCO(2))]ClO(4) (2, R = CH(3); 3, R = H) whose cis (hydroxo)-Fe(III)-(carboxylato) moieties are isotopically labeled by (18)OH(-), (16)OD(-), (18)OD(-), (12)CH(3)(12)C(18)O(2)(-), (12)CH(3)(13)C(16)O(2)(-), (13)CH(3)(12)C(16)O(2)(-), (13)CH(3)(13)C(16)O(2)(-), and H(13)C(16)O(2)(-). Complexes 1-3 are characterized by X-ray analysis, IR, EPR, and UV-vis spectroscopy, and electrospray ionization mass spectrometry (ESI-MS).     

Cyano-bridged bimetallic assemblies from hexacyanometalate, [M(CN)6](3-) (M = Mn(III) and Fe(III)), and [M(N4-macrocycle)]2+ (M=Fe(III), Ni(II) and Zn(II)) building blocks. Syntheses, multidimensional structures, and magnetic properties

Reactions between [M(N(4)-macrocycle)](2+) (M = Zn(II) and Ni(II); macrocycle ligands are either CTH = d,l-5,5,7,12,12,14-hexamethyl-1,4,8,11-tetraazacyclotetradecane or cyclam = 1,4, 8, 11-tetrazaazaciclotetradecane) and [M(CN)(6)](3-) (M = Fe(III) and Mn(III)) give rise to cyano-bridged assemblies with 1D linear chain and 2D honeycomblike structures. The magnetic measurements on the 1D linear chain complex [Fe(cyclam)][Fe(CN)(6)].6H(2)O 1 points out its metamagnetic behavior, where the ferromagnetic interaction operates within the chain and the antiferromagnetic one between chains. The Neel temperature, T(N), is 5.5 K and the critical field at 2 K is 1 T. The unexpected ferromagnetic intrachain interaction can be rationalized on the basis of the axially elongated octahedral geometry of the low spin Fe(III) ion of the [Fe(cyclam)](3+) unit. The isostructural substitution of [Fe(CN)(6)](3-) by [Mn(CN)(6)](3-) in the previously reported complex [Ni(cyclam)](3)[Fe(CN)(6)](2).12H(2)O 2 leads to [Ni(cyclam)](3)[Mn(CN)(6)](2).16 H(2)O 3, which exhibits a corrugated 2D honeycomblike structure and a metamagnetic behavior with T(N) = 16 K and a critical field of 1 T. In the ferromagnetic phase (H > 1 T) this compound shows a very important coercitive field of 2900 G at 2 K. Compound [Ni(CTH)](3)[Fe(CN)(6)](2).13H(2)O 4, C(60)H(116)Fe(2)N(24)Ni(3)O(13), monoclinic, A 2/n, a = 20.462(7), b = 16.292(4), c = 27.262(7) A, beta = 101.29(4) degrees, Z = 4, also has a corrugated 2D honeycomblike structure and a ferromagnetic intralayer interaction, but, in contrast to 2 and 3, does not exhibit any magnetic ordering. This fact is likely due to the increase of the interlayer separation in this compound. ([Zn(cyclam)Fe(CN)(6)Zn(cyclam)] [Zn(cyclam)Fe(CN)(6)].22H(2)O.EtOH) 5, C(44)H(122)Fe(2)N(24)O(23)Zn(3), monoclinic, A 2/n, a = 14.5474(11), b = 37.056(2), c = 14.7173(13) A, beta = 93.94(1) degrees, Z = 4, presents an unique structure made of anionic linear chains containing alternating [Zn(cyclam)](2+) and [Fe(CN)(6)](3)(-) units and cationic trinuclear units [Zn(cyclam)Fe(CN)(6)Zn(cyclam)](+). Their magnetic properties agree well with those expected for two [Fe(CN)(6)](3-) units with spin-orbit coupling effect of the low spin iron(III) ions.     

Extended polyoxometalate framework solids: two Mn(II)-linked {P8W48} network arrays

Two polyoxometalate open framework (POMOF) materials have been synthesized using a secondary building unit (SBU) approach that facilitates the convergent assembly of multidimensional framework materials using a preassembled anionic SBU {P(8)W(48)}, with integrated "pore" 1 nm in diameter, and electrophilic manganese {Mn(2+)} linkers. This yields two new POMOFS with augmented hexagonal tiling (2 and 3), related to a known three-dimensional (3D) cubic array K(18)Li(6)[Mn(II)(8)(H(2)O)(48)P(8)W(48)O(184)]·108H(2)O (1), K(12)[Mn(II)(14)(H(2)O)(30)P(8)W(48)O(184)]·111H(2)O (2), and K(8)Li(4)[Mn(II)(14)(H(2)O)(26)P(8)W(48)O(184)]·105H(2)O (3). These frameworks have been crystallized from aqueous Li-buffered solutions of {P(8)W(48)} and Mn(II)(ClO(4))(2)·6H(2)O via careful control of the synthetic strategy akin to a crystal engineering approach using cation and temperature control to isolate different material architectures shown by compounds 1-3.     

Characterization and electrochemical properties of molecular icosanuclear and bidimensional hexanuclear Cu(II) azido polyoxometalates

Two new Cu(II) azido polyoxometalates compounds have been synthesized, and their structures were determined by X-ray crystallography. The compound Na(14)[SiW(9)O(34)Cu(3)(N(3))(2)(OH)(H(2)O)](2) x 24H(2)O (1) is built from two [SiW(9)O(34)Cu(3)(mu(1,1,3)-N(3))(2)(mu-OH)(H(2)O)](7-) subunits where the copper centers, connected by two azido ligands and one hydroxo group, form a nearly equilateral triangle. The two subunits are related by an inversion center and connected via the two mu(1,1,3)-N(3) ligands in an end-to-end fashion, affording a hexanuclear Cu(II) cluster. Linkage of these fragments via Cu-O=W bonds leads to a bidimensional arrangement of the polyoxometalate units. The complex LiK(14)Na(9)[P(8)W(48)O(184)Cu(20)(N(3))(6)(OH)(18)] x 60H(2)O (2) consists of two {Cu(5)(OH)(4)}(6+) and two {Cu(5)(OH)(2)(mu(1,1,3,3)-N(3))}(7+) subunits connected via four mu-OH and four mu(1,1)-N(3) additional ligands, the 20 copper centers being encapsulated in the [P(8)W(48)O(184)](40-) crown polyoxotungstate ligand. 1 represents the first multidimensional compound based on azido polyoxometalate (POM) units, and 2 represents by far the largest azido POM complex isolated to date. Magnetic measurements revealed an overall antiferromagnetic behavior for both compounds. Nevertheless, the study of the variation of the magnetization with the applied field indicates that 1 possesses a triplet ground state, which can be attributed to weak ferromagnetic interaction between the S = 1/2 triangular subunits. The stability of 1 and 2 evidenced by UV-vis spectroscopy and gel filtration chromatography, in particular at pH 5, has allowed a detailed study of their redox and electrocatalytic properties. For both compounds, the stability of the Cu(II)/Cu(I) couple is remarkable compared with the observations made in other Cu(II)-substituted POMs. Electrochemical quartz crystal microbalance measurements clearly demonstrate that the formation of the Cu(I) species occurs neatly without the formation of Cu(0). The accumulation of such Cu(II) centers within the complexes is a favorable condition to envision applications involving several electrons. The electrocatalytic reduction of dioxygen and hydrogen peroxide was achieved efficiently and has shown that the reactivity increases with the nuclearity and/or the Cu/W ratio of the POM complex. The dioxygen reduction is an overall four-electron process with water as the final product. Finally, the reduction of the W centers triggers a strong electrocatalysis of solvent reduction.     

New lanthanide-containing polytungstates derived from the cyclic P8W48 Anion: {Ln4(H2O)28[K subset P8W48O184(H4W4O12)2Ln2(H2O)10]13-}x, Ln = La, Ce, Pr, Nd

The reaction of K28Li5H7[P8W48O184].92H2O with early lanthanides under hydrothermal and conventional conditions yields novel structures of the molecular formula Ln4(H2O)28K6Li7[K subsetP8W48O184(H4W4O12)2Ln2(H2O)10] congruent with 57H2O, Ln = La (1), Ce (2, 2a), Pr (3), Nd (4), in which the central cavity of the precursor anion is occupied by lanthanide cations and H4W4O12 moieties. The new heteropolyanions were characterized by elemental analysis, infrared spectroscopy, 31P NMR, and X-ray crystallography. All of the crystals are monoclinic, space group C2/m, with lattice constants (A, Epsilon) a = 33.061(3), b = 30.986(3), c = 15.1649(13), beta = 103.607(2), (1); a = 33.0577(16), b = 31.0562(15), c = 15.2320(7), beta = 104.015(2), (2); a = 33.0577(16), b = 31.0562(15), c = 15.2320(7), beta = 104.015(2), (2a); a = 33.007(2), b = 31.060(2), c = 15.2129(10), beta = 104.0140(10), (3); a = 32.913(19), b = 31.155(18), c = 15.135(9), beta = 103.495(11), (4); and Z = 2.     

Kinetic and mechanistic studies on the reaction of nitric oxide with a water-soluble octa-anionic iron(III) porphyrin complex

The polyanionic water-soluble and non-mu-oxo-dimer-forming iron porphyrin iron(III) 5(4),10(4),15(4),20(4)-tetra-tert-butyl-5(2),5(6),15(2),15(6)-tetrakis[2,2-bis(carboxylato)ethyl]-5,10,15,20-tetraphenylporphyrin, (P(8-))Fe(III) (1), was synthesized as an octasodium salt by applying well-established porphyrin and organic chemistry procedures to bromomethylated precursor porphyrins and characterized by standard techniques such as UV-vis and (1)H NMR spectroscopy. A single pK(a1) value of 9.26 was determined for the deprotonation of coordinated water in (P(8-))Fe(III)(H(2)O)(2) (1-H(2)()O) present in aqueous solution at pH <9. The porphyrin complex reversibly binds NO in aqueous solution to give the mononitrosyl adduct, (P(8-))Fe(II)(NO(+))(L), where L = H(2)O or OH(-). The kinetics of the binding and release of NO was studied as a function of pH, temperature, and pressure by stopped-flow and laser flash photolysis techniques. The diaqua-ligated form of the porphyrin complex binds and releases NO according to a dissociative interchange mechanism based on the positive values of the activation parameters DeltaS() and DeltaV() for the "on" and "off" reactions. The rate constant k(on) = 6.2 x 10(4) M(-1) s(-1) (24 degrees C), determined for NO binding to the monohydroxo-ligated (P(8-))Fe(III)(OH) (1-OH) present in solution at pH >9, is markedly lower than the corresponding value measured for 1-H(2)O at lower pH (k(on) = 8.2 x 10(5) M(-1) s(-1), 24 degrees C, pH 7). The observed decrease in the reactivity is contradictory to that expected for the diaqua- and monohydroxo-ligated forms of the iron(III) complex and is accounted for in terms of a mechanistic changeover observed for 1-H(2)O and 1-OH in their reactions with NO. The mechanistic interpretation offered is further substantiated by the results of water-exchange studies performed on the polyanionic porphyrin complex as a function of pH, temperature, and pressure.     

2:2 Fe(III):ligand and "adamantane core" 4:2 Fe(III):ligand (hydr)oxo complexes of an acyclic ditopic ligand

A bis-hydroxo-bridged diiron(III) complex and a bis-mu-oxo-bis-mu-hydroxo-bridged tetrairon(III) complex are isolated from the reaction of 2,6-bis((N,N'-bis-(2-picolyl)amino)methyl)-4-tert-butylphenol (Hbpbp) with iron perchlorate in acidic and neutral solutions respectively. The X-ray structure of the dinuclear complex [{(Hbpbp)Fe([mu-OH)}(2)](ClO(4))(4).2C(3)H(6)O (1.2C3H6O) shows that only one of the metal-binding cavities of each ligand is occupied by an iron(III) atom and two [Fe(Hbpbp)]3+ units are linked together by two hydroxo bridging groups to form a [Fe(III)-(mu-OH)](2) rhomb structure with Fe...Fe = 3.109(1)A. The non-coordinated tertiary amine of Hbpbp is protonated. Magnetic susceptibility measurements show a well-behaved weak antiferromagnetic coupling between the two Fe(III) atoms, J= -8 cm(-1). The tetranuclear complex [(bpbp)(2)Fe(4)(mu-O)(2)(mu-OH)(2)](ClO(4))(4)(2) was isolated as two different solvates .4CH(3)OH and .6H(2)O with markedly different crystal morphologies at pH ca. 6. Complex .4CH(3)OH forms red cubic crystals and .6H(2)O forms green crystalline platelets. The Fe(4)O(6) core of shows an adamantane-like structure: The six bridging oxygen atoms are provided by the two phenolato groups of the two bpbp(-) ligands, two bridging oxo groups and two bridging hydroxo groups. The hydroxo and oxo ligands could be distinguished on the basis of Fe-O bond lengths of the two different octahedral iron sites: Fe-mu-OH, 1.953(5), 2.013(5)A and Fe-mu-O, 1.803(5), 1.802(5)A. The difference in ligand environment is too small for allowing Mossbauer spectroscopy to distinguish between the two crystallographically independent Fe sites. The best fit to the magnetic susceptibility of .4CH(3)OH was achieved by using three coupling constants J(Fe-OPh-Fe)= 2.6 cm(-1), J(Fe-OH-Fe)=-0.9 cm(-1), J(Fe-O-Fe)=-101 cm(-1) and iron(III) single ion ZFS (|D|= 0.15 cm(-1)).